no issue
- post_revisions will now be included in any request to the /posts
endpoint
- updated admin models to include post_revisions
- post revisions can now be accessed in the modal-portal-history via
this.post.post_revisions
refs TryGhost/Team#2691
- The bump adds possibility to make email's html/text snapshots with dynamic content. The breaking change here is with separate "matchPlaintextSnapshot" method extracted out of "matchMetadataSnapshot" to handle dynamic content in "text" part of the sent email.
- this cleans up all imports or variables that aren't currently being used
- this really helps keep the tests clean by only allowing what is needed
- I've left `should` as an exemption for now because we need to clean up
how it is used
fixes https://github.com/TryGhost/Team/issues/2611
The old email flow is no longer used since we introduced the email stability flow. This commit removes the related code and tests. The general test coverage decreased a bit as a result, because the old email flow probably had a high test coverage. The new flow is in separate packages, so it couldn't contribute to a higher test coverage (but it does have 100% unit test coverage).
refs https://github.com/TryGhost/Team/issues/2526
- created a migration for a new boolean column in users that would
determine if the staff user gets an email when the publication receive a
new mention.
no issue
There are a couple of issues with resetting the Ghost instance between
E2E test files:
These issues came to the surface because of new tests written in
https://github.com/TryGhost/Ghost/pull/16117
**1. configUtils.restore does not work correctly**
`config.reset()` is a callback based method. On top of that, it doesn't
really work reliably (https://github.com/indexzero/nconf/issues/93)
What kinda happens, is that you first call `config.reset` but
immediately after you correcty reset the config using the `config.set`
calls afterwards. But since `config.reset` is async, that reset will
happen after all those sets, and the end result is that it isn't reset
correctly.
This mainly caused issues in the new updated images tests, which were
updating the config `imageOptimization.contentImageSizes`, which is a
deeply nested config value. Maybe some references to objects are reused
in nconf that cause this issue?
Wrapping `config.reset()` in a promise does fix the issue.
**2. Adapters cache not reset between tests**
At the start of each test, we set `paths:contentPath` to a nice new
temporary directory. But if a previous test already requests a
localStorage adapter, that adapter would have been created and in the
constructor `paths:contentPath` would have been passed. That same
instance will be reused in the next test run. So it won't read the new
config again. To fix this, we need to reset the adapter instances
between E2E tests.
How was this visible? Test uploads were stored in the actual git
repository, and not in a temporary directory. When writing the new image
upload tests, this also resulted in unreliable test runs because some
image names were already taken (from previous test runs).
**3. Old 2E2 test Ghost server not stopped**
Sometimes we still need access to the frontend test server using
`getAgentsWithFrontend`. But that does start a new Ghost server which is
actually listening for HTTP traffic. This could result in a fatal error
in tests because the port is already in use. The issue is that old E2E
tests also start a HTTP server, but they don't stop the server. When you
used the old `startGhost` util, it would check if a server was already
running and stop it first. The new `getAgentsWithFrontend` now also has
the same functionality to fix that issue.
refs https://github.com/TryGhost/Team/issues/2400
- we've deemed it useful to start to return `Content-Version` for all
API requests, because it becomes useful to know which version of Ghost
a response has come from in logs
- this should also help us detect Admin<->Ghost API mismatches, which
was the cause of a bug recently (ref'd issue)
refs https://github.com/TryGhost/Toolbox/issues/499
- Outgoing emails have been a weak point of Ghost's stability recently. The concept of "emailMockReceiver" similarly to "webhookMockReceiver", allows to test side-effects like outgoing emails.
- This is a first iteration which should lay groundwork for testing all outgoing emails in the future
- The change adds a new concept of "email mock receiver" which is very similar to how the "webhook mock receiver" works. The email mock receiver exposes two methods to record and verify snapshots:
- matchHTMLSnapshot - records and verifies only the HTML content of the outgoint email
- matchMetadataSnapshot - records and verifies all the non-HTML properties sent along an email content, e.g.: to address, plaintext, subject, etc.
- What's missing is matching content based on dynamic content like dates, links with JWT tokens, etc.
no issue
With the increased usage of DomainEvents, it gets harder to build
reliable tests without having to resort to timeouts. This utility method
allows us to wait for all events to be processed before continuing with
the test.
This change should speed up tests and make them more reliable.
It only adds extra code when running tests and shouldn't impact
production.
fixes https://github.com/TryGhost/Team/issues/2366
refs https://ghost.slack.com/archives/C02G9E68C/p1670232405014209
Probem described in issue.
In the old MEGA flow:
- The `email_verification_required` check is now repeated inside the job
In the new email service flow:
- The `email_verification_required` is now checked (didn't happen
before)
- When generating the email batch recipients, we only include members
that were created before the email was created. That way it is
impossible to avoid limit checks by inserting new members between
creating an email and sending an email.
- We don't need to repeat the check inside the job because of the above
changes
Improved handling of large imports:
- When checking `email_verification_required`, we now also check if the
import threshold is reached (a new method is introduced in
vertificationTrigger specifically for this usage). If it is, we start
the verification progress. This is required for long running imports
that only check the verification threshold at the very end.
- This change increases the concurrency of fastq to 3 (refs
https://ghost.slack.com/archives/C02G9E68C/p1670232405014209). So when
running a long import, it is now possible to send emails without having
to wait for the import. Above change makes sure it is not possible to
get around the verification limits.
Refactoring:
- Removed the need to use `updateVerificationTrigger` by making
thresholds getters instead of fixed variables.
- Improved awaiting of members import job in regression test
refs https://github.com/TryGhost/Team/issues/2235
We found some cases which can cause a site to have member emails that have invalid characters like `member@example.com�`. This happened due to the `validator` version used by Ghost not able to catch some specific cases as invalid email, allowing members to be created with them either via Admin or Importer or direct signup. Portal UI already blocked these email as invalid. This change:
- updates `@tryghost/validator` to include a latest version of email validator that catches these invalid cases
- doesn't allow member creation with invalid email like above
- doesn't allow existing member emails to be edited to invalid
no issue
- The sleep method has been used in 8 modules reimplementing the same thing over and over again. It's usually a sign of async event processing outside of the request/response loop. It's good to have a single point of implementation for a "hack" like this, so we could track it easier and address the even processing delay in a more optimal way centrally if it ever becomes a bottleneck
refs https://github.com/TryGhost/Team/issues/2326
- The job takes considerably longer to run with MySQL, so needed a longer sleep time. It's a temporary fix to unblock a broken build. We should investigate why the job takes so long to run on MySQL
fixes https://github.com/TryGhost/Team/issues/2326
When importing more than 500 members, we didn't testImportThreshold at
the right time. It was called too early because the importing job was
not awaited. This also adds an E2E test for this case.
fixes https://github.com/TryGhost/Team/issues/2282
Added a new email service package that is used when the email stability
flag is enabled. Currently not yet implemented so will throw an error
for all entry points (if flag enabled).
Removed usage of `labs.isSet.bind` across the code, because that breaks
the stubbing of labs by `mockManager.mockLabsEnabled` and
`mockManager.mockLabsDisabled`. `flag => labs.isSet(flag)` should be
used instead.
All email depending tests now disable the `emailStability` feature flag
to keep the tests passing + make sure we still run all the tests for the
old flow while the email stability package is being built.
fixes https://github.com/TryGhost/Team/issues/2085
Don't load relations we don't need anymore for the posts table. And
reload the individual post when we open the analytics page with more
relations that we actually need.
fixes https://github.com/TryGhost/Team/issues/2090
- This changes how sentiment is exposed in the API. Now it is exposed as a `sentiment` relation, directly on the model (no longer in counts). Internally we still use `count.sentiment`.
- Content API users (and themes) can include the 'sentiment' relation and order by sentiment.
- Updated Admin to use sentiment instead of count.sentiment
closes: https://github.com/TryGhost/Ghost/issues/15470
- When multiple browser tabs are open, each manipulate a different copy of ember data model, changes to the model in one tab are not reflected in the model of the other tab.
- When updating some settings, all current settings were sent to the API.
- As a result, when updating two different categories of settings (navigation/code inspection) in different tabs, the second update was overriding the first one.
- From a user perspective, this is not a natural behaviour. Only settings visible on-screen when clicking save should be modified.
Co-authored-by: Kevin Ansfield <kevin@lookingsideways.co.uk>
refs https://github.com/TryGhost/Toolbox/issues/425
refs https://github.com/TryGhost/Toolbox/issues/280
- The versioned API responses vary based on requested version (passed in request's 'accept-version' header). shared caches that sit between Ghost's origin server and the browser would be putting responses with same Vary into the same caching bucket, which is incorrect.
- This change makes response's Vary more granular and tells caching mechanisms to take 'Accept-Version' request header into account when caching.
- Informative read on the topic - https://www.fastly.com/blog/getting-most-out-vary-fastly
refs https://github.com/TryGhost/Toolbox/issues/410
- Private cache control was preventing browser or shared caches from storing Content APIs response. The type of data served through the Content API is very much of a "public" nature, so should be cacheable.
- Right now the 'max-age' value of 'cache-control' header is hardcoded to '0', without 'must-revalidate' value, to allow browsers to cache content slightly more aggressively. In the future the 'max-age' value will most-likely become configurable to allow even more aggressive HTTP caching.
refs https://github.com/TryGhost/Toolbox/issues/410
- The 'private' value in 'Cache-Control' response header for all errors made it impossible for shared caches (e.g.: Fastly, Cloudflare) to cache 404 responses efficiently.
- The change substitutes 'max-age=0' which should not effect the browser cache behavior but would allow shared caches to process such requests efficiently.
- A more loose caching logic only applies to 404 responses from GET requests that are not user-specific (non-authenticated, non-cookie containing requests)
- This fixture is the main user fixture you'd want to use when testing staff roles
- At the moment it has a weird name that makes it less likely people will use it
- A tiny step in trying to make our fixture system make a tiny bit more sense
refs https://github.com/TryGhost/Team/issues/1825
- adds 3 new columns to users table for storing email alert preferences for member signups/cancellation
- adds column for new member signup alert
- adds column for paid subscription started alert
- adds column for paid subscription canceled alert
- Updated default fixtures and tests for new columns
refs https://github.com/TryGhost/Team/issues/1822
Exposing the values through the API is restricted behind the alpha flag.
We're exposing the values by default when the flag is enabled for now,
but can reconsider that later.
refs https://github.com/TryGhost/Team/issues/1808
refs https://github.com/TryGhost/Team/issues/1809
refs https://github.com/TryGhost/Team/issues/1820
refs https://github.com/TryGhost/Team/issues/1814
### Changes in `member-events` package
- Added MemberCreatedEvent (event, not model)
- Added SubscriptionCreatedEvent (event, not model)
### Added `member-attribution` package (new)
- Added the AttributionBuilder class which is able to convert a url history to an attribution object (exposed as getAttribution on the service itself, which handles the dependencies)
```
[{
"path": "/",
"time": 123
}]
```
to
```
{
"url": "/",
"id": null,
"type": "url"
}
```
- event handler listens for MemberCreatedEvent and SubscriptionCreatedEvent and creates the corresponding models in the database.
### Changes in `members-api` package
- Added urlHistory to `sendMagicLink` endpoint body + convert the urlHistory to an attribution object that is stored in the tokenData of the magic link (sent by Portal in this PR: https://github.com/TryGhost/Portal/pull/256).
- Added urlHistory to `createCheckoutSession` endpoint + convert the urlHistory to attribution keys that are saved in the Stripe Session metadata (sent by Portal in this PR: https://github.com/TryGhost/Portal/pull/256).
- Added attribution data property to member repository's create method (when a member is created)
- Dispatch MemberCreatedEvent with attribution
### Changes in `members-stripe-service` package (`ghost/stripe`)
- Dispatch SubscriptionCreatedEvent in WebhookController on subscription checkout (with attribution from session metadata)
refs https://github.com/TryGhost/Team/issues/1695
This property can be used by theme developers to determine if comments
are available for the currently logged in member. It follows the same
logic as used internally in the comments helper, so that they can be
used interchangeably
refs https://github.com/TryGhost/Toolbox/issues/354
- this commit turns the Ghost repo into a monorepo so we can bring our
internal packages back in, which makes life easier when working on
Ghost