no issue
- Improved error handling for member creation. We should be returning 422s instead of 500 when possible
- Wrapped `members.add` method with Bluebird promise. Wrapping is needed to be able to use `.reflect()` in CSV export method
- Added proper members CSV fixture
no issue
- Added Regression full test coverage for members Admin API
- Added `POST /members` endpoint
- Added members schema definition + validation
- Added ability to pass through send_email/emal_type options to members API
- Currently, we create a request ID for internal use if one isn't set & this is used in logs
- If a custom request ID is set via X-Request-ID header, this gets logged, however, we don't return this with the response
- Means that a custom ID gets lost on the way back out, and makes tracing requests through a system trickier
- This change ensures that if X-Request-ID is set on the request, it is also set on the response so that requests can be properly traced
- It's easy to set this in e.g. nginx so that the feature becomes available - Ghost doens't need to do this
- Note: also split request id handling out into new middleware
no-issue
This also adds a basic check before handing of to the members-ssr
module, this should make logs a little less noisy and only log warnings
if a token was passed and that token was invalid/incorrect.
closes https://github.com/TryGhost/Ghost/issues/11078
Problem:
- the admin client makes an XHR request to the `/private/` endpoint when a private site is configured
- when a separate admin URL is configured this was causing 500 errors in the admin client because missing CORS headers on the endpoint was causing browsers to abort the request
- browsers will also look at the CORS headers on any resources that are the result of a redirect and abort the request if they do not allow cross-origin requests, this means allowing all requests on `/private/` is not enough
Solution:
- uses the `cors` middleware with a dynamic options function for the whole of the front-end site app
- dynamic options function allows the following requests through:
- same-origin (browsers and non-browser agents will not send an `Origin` header)
- origin is `localhost` or `127.0.0.1` with any protocol and port
- origin matches the configured `url` hostname+port on any protocol
- origin matches the configured `admin:url` hostname+port on any protocol
no issue
- when too many login attempts were detected for the `/private/` form we were throwing 500 errors instead of the more appropriate 429 error that we use everywhere else for "too many request" type errors
no-issue
* Installed members-api@0.5.0 members-ssr@0.3.1
* Supported multiple members-forms
* Used members canary api
* Added GET handler to /members/ssr for id token
The identity token will be used to ensure that a payment is linked to the correct member
* Added stripe.js to ghost_head when members enabled
* Added basic support for linking to stripe checkout
* Removed listener to title and icon settings changes
* Added stripe subscription config
closes#10060
- Implemented scheduling for posts and pages
- Added cache invalidation when scheduling
- Refactored admin token eneration function to accept existing key as parameter in tests
- Added Ghost Scheduler Integration fixture
- Added fixture for permissions for post publish action
- Migrated getScheduled method to v2
- Did not add support for 'from' and 'to' parameters as they were not used by DefaultScheduler
- This method needs rethinking in a long run as it's an ugly hack and should rather become proper endpoint that returns JSON data instead of models
- Removed unused auth middleware from v2 routes
- Added internal scheduler role
- Implemetnted transactions in v2 frame
- This takes into account scenario mentioned in c93f03b87e
- Specifically:
>if two queries happening in a transaction we have to signalise
knex/mysql that we select for an update
otherwise the following case happens:
you fetch posts for an update
a user requests comes in and updates the post (e.g. sets title to "X")
you update the fetched posts, title would get overriden to the old one
refs #10060
- Migrated authentication.resetPassword method to v2
- Migrated authentication.acceptInvitation method to v2
- Migrated authentication.setup method to v2
- Added missing test coverage for "setupUpdate" method
- Migrated authentication.updateSetup method to v2
- Migrated authentication.isInvitation method to v2
- Migrated authentication.isSetup method to v2
- Removed unused 'setup.completed' event as it wasn's used anywhere in the system and has been complicating the logic unnecessarily
- Without the event, it's possible to simplify sendNotification method to just use email address of the user
- Added email sending check to v0.1 test suite
- Refactored sendNotification method to just use email address as parameter
- Renamed sendNotification to sendWelcomeMail
- The only thing the method does now is sending welcome mail, so new naming seems natural :)
no-issue
Previously we were using the error logger, which is probably a bit
extreme for these errors. This also removes the stacktrace from the logs
so we don't enter fresh hell whilst developing/looking through logs.
refs #10932
Previously we were only applying the cors middleware to the options
preflight request, which meant that if the request errored, the cors
headers would not be applied, resulting in the client being unable to
read response data. This applies the cors middleware to _all_ requests
to the Admin API.
closes#10932
Previously we were only applying the cors middleware to the options
preflight request, which meant that if the request errored, the cors
headers would not be applied, resulting in the client being unable to
read response data. This applies the cors middleware to _all_ requests
to the Content API.
* Installed @tryghost/members-ssr@0.2.1
refs https://github.com/TryGhost/Members/issues/38
This updates allows for dynamic access of the membersApi, which will be
used in future when replacing the membersApi instance with a newly
configured one.
* Set the membersApiInstance logger to use common.logging
refs https://github.com/TryGhost/Members/issues/38
Passes the Ghost logger to the members api, so that we can keep an eye
on errors produced by the api.
* Refactored memberService use to always use getter
refs https://github.com/TryGhost/Members/issues/38
This will allow us to switch out the membersApi and the consumers of it
to have the updated reference by going through a getter.
* Installed @tryghost/members-api@0.3.0
refs https://github.com/TryGhost/Members/issues/38
Adds support for setting the logger
* Uninstalled stripe@7.0.0
refs https://github.com/TryGhost/Members/issues/38
The stripe module is now a dep of members-api, as it should be
* Updated members service to reconfigure settings
refs https://github.com/TryGhost/Members/issues/38
Previously we were unable to stop an invalidly configured members api
instance, now that we create a new instance, we can wait for the ready
or error event and only switch it out then.
* Swapped v1 with v4 UUID as requestId when logging
no issue
v1 UUID are based on current time and the hardware MAC address of the
machine where they are being generated. As such they have much more
complex semantics than v4 UUIDs which are simply randomly generated.
Unless there's a specific requirement for the special semantics of v1
UUIDs it is simpler and less error prone to simply go for v4 UUIDs
whenever just a unique identifier is needed.
* Swapped v1 with v4 UUID when creating a temporary contentFolder
no issue
v1 UUID are based on current time and the hardware MAC address of the
machine where they are being generated. As such they have much more
complex semantics than v4 UUIDs which are simply randomly generated.
Unless there's a specific requirement for the special semantics of v1
UUIDs it is simpler and less error prone to simply go for v4 UUIDs
whenever just a unique identifier is needed.
* Swapped v1 with v4 UUID when creating a temporary exportFolder
no issue
v1 UUID are based on current time and the hardware MAC address of the
machine where they are being generated. As such they have much more
complex semantics than v4 UUIDs which are simply randomly generated.
Unless there's a specific requirement for the special semantics of v1
UUIDs it is simpler and less error prone to simply go for v4 UUIDs
whenever just a unique identifier is needed.
* Installed @tryghost/members-api@0.2.0
refs #10886
This will allow us to mount one router rather than having a static and
api router.
* Added members v2 api directory
refs #10886
This brings the members api more inline with how the rest of the apis
work within Ghost.
* Mounted the members api app to the api route
closes#10886
This successfully mounts the api and the static pages to the
/api/v2/members/ URL.
* Installed @tryghost/members-auth-pages@1.0.0
refs #10886
This updates the auth pages to work correctly with the new mount point.
* Changed membersUrl in members.js to use members api
refs #10886
This keeps the membersUrl lined up with the path for the static
members pages.
* Removed old members static mount point
refs #10886
These are no longer used, nor desired.
* Remove superfluous code from members service
refs #10886
This remove the gateway getter which is no longer used, and the fallback
for members not enabled - which is handled within the members app.
* Updated ssoOrigin to use admin url
refs #10886
This ensures that sites running on a separate admin domain have the
correct ssoOrigin, which is used to ensure only the designated auth
pages are used to hit the authentication endpoints.
Since the auth pages are now hosted under the `/ghost` url, they will be
on the admin origin and not the site origin
no issue
- Updated Test & linting packages
- Updated use of hasOwnProperty
- Using Object.prototype.hasOwnProperty instead (ref. eslint.org/docs/rules/no-prototype-builtins)
- Removed already defined built-in global variable Intl
- Applied `--fix` with lint command on `core/test` folder
- The rules were broken because some of them were made stricter for `eslint: recommended` ruleset (ref. https://eslint.org/docs/user-guide/migrating-to-6.0.0#eslint-recommended-changes)
- Removed redundant global variable declarations to pass linting
- allow both uploading and activating themes as experiemental API features
- previously only uploading was allowed, I believe purely due to an oversight
refs #10790
- Moved /core/apps into core/frontend
- Moved /core/server/helpers to /core/frontend/helpers along with /core/server/services/themes
- Changed helper location in overrides
- Moved /core/server/services/routing to /core/frontend/services
- Moved /core/server/services/url to /core/frontend/services
- Moved /core/server/data/meta to /core/frontend/meta
- Moved /core/server/services/rss to /core/frontend/services
- Moved /core/server/data/xml to /core/frontend/services
closes#10773
- The refactoring is a substitute for `urlService.utils` used previously throughout the codebase and now extracted into the separate module in Ghost-SDK
- Added url-utils stubbing utility for test suites
- Some tests had to be refactored to avoid double mocks (when url's are being reset inside of rested 'describe' groups)
closes#10776
When the "to" property of the redirect includes a host (implying an external or fully qualified url) we skip replacing any paths and redirect straight to it, rather than modifying the URL with the sites sub-directory.
no issue
- by default the `/ghost/` route will add an `x-frame-options: sameorigin` header to the response to help protect the admin area against clickjacking
- the header can be disabled by adding `"adminFrameProtection": false` to the `config.{env}.json` configuration file
Credits: Muhammad Fawwad Obaida
