refs https://github.com/TryGhost/Team/issues/637
refs https://github.com/TryGhost/Team/issues/591
We need to run migrations which will update the `portal_plans` setting
to use id's rather than names. This migration relies on the
`stripe_prices` table being complete populated. The migration to
populate the `stripe_prices` table was not added as a "normal"
migration because it needs to access the Stripe API over the network.
Any migrations that rely on this are unable to be run in a "normal"
migration as that cannot be sure that the database is in the correct
state.
The `portal_plans` setting migration is therefore run in code, and needs
access to the Settings model in order to modify the database.
closes https://github.com/TryGhost/Team/issues/645
- we did some refactoring in [1] to turn promise chained code into
async/await, but this removed an early `return` from the code
- therefore we'd continue on to further code, which breaks for obscure
reasons that weren't apparent from the error
- this commit adds back a return at the end of the block where we handle
staff API tokens to match the same functionality as before
- this is regression that landed in 4.3.0 and would break staff user
tokens
[1]: b677927322 (diff-bc0bedcac8ec9646d0644c86a91e46f4759bc1b0c2aebac54a2b26ec474c3d15L148-L155)
refs https://github.com/TryGhost/Team/issues/579
The new signup access setting allows site owner to set the type of access level allowed for a member which Portal needs to handle
refs https://github.com/TryGhost/Team/issues/579
`members_signup_access = 'invite'` now forces invite-only mode so both free and paid setups both use the `'all'` setting. To ensure we're properly allowing/disabling free (self signup) signups in the members API we need to update `allowSelfSignup()` to take additional settings into account.
- `true` when Stripe is not connected. There are no paid plans available in this configuration so free signup is always enabled. To disable free signup on a site with no Stripe setup the members signup access should be set to `invite` or `none`.
- `true` when Stripe is configured and free plan is enabled in portal, without it Members API would not send magic link emails to signup requests
- `false` in all other situations such as invite-only and members-disabled signup access modes, or when the free plan has been disabled in portal configuration
refs: bf0823c9a2
refs: ae86254972
- continuing the work of splitting up the theme service into logical components
Themes Service
- The serverside theme service now serves just the API and boot
- It loads the theme and passes it to the theme-engine via the bridge
This achieves the bare minimum goal of removing all the cross requires between server and frontend around themes
There is still a lot more to do to achieve an ideal architecture here as laid out in ae86254972
issue https://github.com/TryGhost/Team/issues/614
- Users who have a password can directly sign-in via oauth
- User who are logged-in get their password disabled
- Users accepting an invitation get their password disabled
- The way we disable password is by setting it to a long random password
refs c873899e49
- as of `bson-objectid` v2.0.0, this library exports the function
to generate an ObjectID directly, and then you need to use `.toHexString()`
to get the 24 character hex string - 6696f27d82
- this commit removes all uses of `.generate()` and replaces with this
change
- This is the beginning of splitting up the theme service into:
- Storage components used by the API (should be a server service)
- Theme engine & rendering components used by the frontend (this new engine service)
- The code to activate a theme which is shared code where the API & frontend need to communicate
- This is needed because currently the frontend theme service is required and used by the API, creating tight coupling.
- In my quest to truly separate the API and frontend, this is one of many battles that needs winning
refs https://github.com/TryGhost/Team/issues/579
- setting `members_signup_access` to `'none'` effectively disables all built-in members functions on the front-end so setting `@labs.members` to `false` allows themes to react accordingly
- `@labs.members` keeps backwards compatibility with pre-4.0 versions where themes were using it to toggle member-related functionality
refs https://github.com/TryGhost/Team/issues/579
Currently the members signup setting is explicitly yes/no to allowing free members signup, with the implication that when set to "no" members is still active but members have to be created via Stripe or the admin API.
This change renames the setting and changes its type to allow more than a binary option.
- migration to create/update the new setting based on the old value
- free signup = "all", no free signup = "invite"; matches the current UI for this setting
- rename setting everywhere it's used/tested against
- modify `getAllowSelfSignup()` used to configure members packages to only return `true` when the new setting is set to `'all'` to match behaviour to the older setting
- update importer to rename the setting when importing from an older Ghost version
refs https://github.com/TryGhost/Team/issues/586
- Passes new Product, Stripe Price and Stripe Product models to members API service
- Allows members service to populate the tables for existing plans and products
https://github.com/TryGhost/Team/issues/599
- When custom integration limit is enabled all webhooks belonging to integrations have to be disabled as well. The result is the webhook would stop working and to discover that a user would need to navigate to Admin UI (this changes is yet to come, see refed issue)
https://github.com/TryGhost/Team/issues/599
- When custom integration limit is enabled all requests from existing integrations should not be accepted. With the exception of internal integrations like backup and scheduler
refs https://github.com/TryGhost/Team/issues/599
- This is a precursor change to tests which verify the hostSettings limits are working correctly
- Bumped limits-service version which allows for multiple calls of loadLimits on the same service instance
refs https://github.com/TryGhost/Team/issues/510
- This version bump includes follwing interface improvements of the limit-service package: passing in errors as a parameter to "loadLimits" and allowing for custom "currentCountQuery" method implementations per limit
refs https://github.com/TryGhost/Team/issues/397
The default newsletter/support email address for a site is currently setup as noreply@DOMAIN , which means for a custom domain setup with www the email address becomes noreply@www.somesite.com which is not the expected behavior normally. This removes the `www` subdomain if present for those email addresses, but doesn't change any other subdomain
refs https://github.com/TryGhost/Team/issues/536
From 4.0, we ensure and require that accent colour is always set. This change removes hardcoded accent color fallbacks to avoid confusion as well as cause accidental fallback that is undesired causing themes to look different
closes https://github.com/TryGhost/Team/issues/570
When site owner/admin updates their newsletter/support email address from settings, they receive an email with confirmation link which on success takes them to Ghost Admin on email settings screen with a toast about success. Since the path for email settings in Ghost Admin changed in v4, the fix updates the redirect link to new Admin settings URL.
refs 4dc413d6a1
- Fixed failing test cases which were designed to check non-major upgrade messages. There's no clear use cases for those, but still worth keeping such case in mind
closes https://github.com/TryGhost/Team/issues/564
refs https://github.com/TryGhost/Ghost/issues/10236
- The notification to upgrade to new 4.0 Ghost version was still visible to users after upgrading the instance to 4.0. This was caused by notification filtering not taking into account 3.x or 4.x versions.
- The fix filters out notifications that detect a major version notification using `x.0 is now available` pattern and compares current version to that major. This should future proof the issue from happening in Ghost 5.0 (but a proper holistic fix is preferable!)
no issue
Comped members were not able to view paid-member content because content gating was only looking for `member.status === 'paid'` which doesn't take into consideration members on a "complimentary" plan.
- added front-end acceptance tests for member access to posts
- updated content-gating check to take comped members into consideration
refs: https://github.com/TryGhost/Team/issues/510
- The current member limit was implemented as a member-specific concept
- The new limit service is much more generic, here we are swapping old for new
- The updated concept here is blocking all publishing, not just email sending, when a site is over its member limit
- To determine that we are publishing a post, we must be in the model layer. The code has been moved to the permissible function which makes sense as this is a permissions error that we are throwing
- I've left the extra check for email retries in, in case there is some loophole here (but we may wish to change it)
refs https://github.com/TryGhost/Team/issues/510
- When the host config was introduced it was incorrectly introduced as host_settings instead of hostSettings
- All other Ghost config uses camelCase, so changing this now before it becomes a problem
- Note: Also removed some rogue return awaits that don't make sense. It's not possible to hit that case, but cleaning up anyway
refs https://github.com/TryGhost/Team/issues/509
- During 3.x we standardised on "lang" instead of "default_locale" for the site setting, which was an assumption based on an earlier change to @site.lang to make <html lang="@site.lang"> read nicer. This was a mistake as the field represents more than "lang" its a "locale". With this changeset we introduce a transition to use "locale" name for the value instead of "lang"
- Adds `@site.locale" value in as well as new 'locale' property in Content API's response
- "lang" will be considered as deprecated starting with API v4 and will be dropped completely with API v5
refs https://github.com/TryGhost/Team/issues/509
- Flipping around key/newKey pair allows to map multiple keys to the same field in the settings
- This becomes handy when there's a need to deprecate a field. For example, we are about to introduce a 'locale' setting which would need to map to 'lang' db key, with current structure it's impossible to have many:1 mapping because it's impossible to have duplicate keys in the JS object ("hash")
refs: https://github.com/TryGhost/Team/issues/510
- added and wired up the new limit service, which is a lazy-loaded service
- this handles the case that there are host limits set in config, and wraps all the logic needed for detecting exceeded limits & throwing limit errors
- expects limits to be set in config under `host_settings.limits`
- supported limits are managed in the limit service, outside of core
refs https://github.com/TryGhost/Ghost/issues/12610
refs https://github.com/mailgun/mailgun-js-boland/blob/v0.22.0/lib/request.js#L285-L333
The mailgun domain is used by the mailgun API to construct the URL for
the API. e.g for a domain of "mg.example.com" the URL for the API
messages would look like:
https://api.mailgun.net/v3/mg.example.com/messages
One weird thing about the mailgun API is that if the path does not map
to an API endpoint, then instead of a 404, we get a 200, with a body of
"Mailgun Magnificent API".
The `mailgun-js` library which we use, expects a JSON response, and will
return a body of undefined if it does not get one.
This all resulted in us trying to read the property `id` of an undefined
`body` variable. The fix here is to reject the containing Promise, if
there is no body. So that the default error handling will kick in.
refs https://github.com/TryGhost/Team/issues/513
- Bumping version as this is now the latest stable API.
- The change might cause this particular side effect (acceptable for major version): if a member requests a login URL when the instance is on 3.x version and site owner upgrades do 4.x before member authenticates through login link, the login will fail and the member will have to request a new login URL.
refs https://github.com/TryGhost/Ghost/pull/12541
refs https://github.com/TryGhost/Ghost/pull/12689
- the analytics job had been switched to create it's own instance of EmailAnalyticsService to avoid requiring logging but the analytics extraction branch was created before this change and wasn't picked up when merging
- pulled `queries` option object into a separate file for re-use
- updated `fetchLatest` job to conform to extracted library interface
closes https://github.com/TryGhost/Team/issues/493
- all functionality except that directly related to Ghost's database and business logic now lives in external packages
- @tryghost/email-analytics-service
- @tryghost/email-analytics-provider-mailgun
refs https://github.com/TryGhost/Ghost/issues/12716
- This change is made to avoid using now deprecated 'v2' API anywhere in the codebase.
- Switching to 'v4' should not cause sideeffects as this parameter is always present within the URL when Admin API is used
refs https://github.com/TryGhost/Ghost/issues/12716
- The code in serializePostModel was broken and always defaulted to 'v3'! It refered to non-existent `model.get('api_version')` there's no such field in posts model! Changed the implementation so that the API version is passed in as a parameter to the method instead
- The style of providing "defaults" everywhere creates a need for future maintenance when we bump the version e.g in Ghost v5. Maybe reworking these methods to require a passed version and throwing an error instead would be more maintainable long-term?
refs https://github.com/TryGhost/Ghost/issues/12716
- The default API in Ghost v4 will be `'v4'`. When a new webhook is created or any data passes through serialization it should assume `v4` as a fallback if not specified.
refs https://github.com/TryGhost/Team/issues/498
Requests to fetch the data of the logged in member made without a
session cookie were responsing with 400 Bad Request. This was incorrect
and always should have been a 401 Unauthorized.
refs https://github.com/TryGhost/Team/issues/498
This was filling up logs with less than useful information - for every
single request made by a non-member to the frontend. Be gone!
refs https://github.com/TryGhost/Ghost/issues/12602
As part of the member events, we added a third status of 'comped'.
Members with a status of 'comped' should still be considered paid, so
this fixes the definition of the paid flag to take that into account.
refs https://github.com/TryGhost/Team/issues/221#issuecomment-759105424
- Mailgun responds to an email send with a provider id in the format `<x@y.com>` but everywhere else it's used in their API it uses the format `x@y.com`
- updates email batch save to strip the brackets, and migration removes brackets from existing records so we no longer have to add special handling for the stored id any time we use it
refs https://github.com/TryGhost/Ghost/issues/12496
By requiring the models layer the shared logging util was being required as a side-effect causing the open file descriptors problem to continue. Removing logging from the models layer isn't feasible due to deep require chains spreading across the codebase, it's much quicker to remove the need for models in the analytics job.
- models layer was only needed because it's used by the session service
- updated analytics job to create it's own instance of `EmailAnalyticsService` rather than the default instance in order to pass in custom dependencies
- pass in custom `logging` object that uses `parentPort.postMessage` as a way of writing log output
- pass in custom `settings` object that returns settings that have been manually fetched and cached during job instantiation
refs https://github.com/TryGhost/Ghost/issues/12496
- Handling logging in the main thread avoids file handle leaks which happen due to leaky implementation of bunyan logger (see referenced issue for more context)
- Bumped job-manager version to allow for `workerMessageHandler` callback funciton
refs https://github.com/TryGhost/Ghost/issues/12496
- Using ghost-ignition logging caused file handle leaks. As there is no straight-forward way to handle write streams with bunyan (ghost-ignition's underlying logging library) this method of logging was chosen as an alternative to keep the amount of open file handles to minimum
- The follow up changes will include custom formatter for jobs service which should make logging match the same format as has been used inside the jobs
refs https://github.com/TryGhost/Ghost/issues/10318
- Because members is effectively "enabled" by default starting Ghost 4.0 have hardcoded labs setting to be such. The alternative of removing this key from labs would be equivalent to `labs.members === false` which is undesireable and would mean additional work on theme developer's side.
refs https://github.com/TryGhost/Ghost/issues/12602
* Updated members_status_events table
By replacing the `status` column with a `from_status` and `to_status`
column, we are able to track the changes between multiple statuses
easier, and accumulate the data. e.g. the delta of paid members in a
given time range is the sum of the `to_status` columns set to 'paid'
minus the sum of the `from_status` columns set to 'paid' within that
time range
* Updated MEGA to handle addition of 'comped' status
With the addition of the 'comped' status, we need to ensure that MEGA
will still send emails to the correct recipients. I've opted to use an
"inverse" filter, as that is the intention of the free/paid split in
MEGA - as far as MEGA is concerned, "free" is the opposite of "paid"
* Updated customQuery for MemberStatusEvent
With the `status` column replaced with `from_status` and `to_status`
this allows us to fix and update the customQuery to correctly accumulate
the data into deltas over time, broken down by day.
* Populated members_status_events table
As the table will be used to generate deltas, we need to backfill the
data so that existing sites will be able to sum up the deltas and
calculate correct data.
The assumptions used in backfilling is that a Member's current status,
is their only status.
no-issue
This removes all references to the members labs setting, any code that was run conditionally behind this flag now runs unconditionally.
* Removed usage of Members labs flag
* Removed tests for Members disabled
* Added dynamic keypair generation for when setting is missing
no refs
- Updates member model serializer to directly set subscriptions on member object instead of `stripe.subscriptions`
- Updates all references to members subscriptions from nested `stripe.subscriptions` to `subscriptions`
- Updates v3 API serializer to still use `stripe.subscriptions`
- Updates tests
no-issue
* Removed support for paid param from v3 & canary API
* Updated active subscription checks to use status flag
* Updated MEGA to use status filter over paid flag
* Removed support for paid option at model level
* Installed @tryghost/members-api@1.0.0-rc.0
* Updated members fixtures
no issue
We added `portal-action` and `requestSrc` in 3.x to allow Portal to handle notifications only for auth actions trigged while using it directly, so that existing themes are not affected in any way. Going forward in 4.0, we don't want to have any special handling in backend for Portal but instead expect themes to handle any Portal specific behavior directly.
- Removes setting of `portal-action` for auth actions like signup
- Removes `requestSrc` being passed through to determine portal actions
refs #12537
- Refactored overuse of rewire mocking blog-version.
- Fixed a bug introduced along the way when duplicate notifications errored instead of returning empty result
refs #12537
- notifications controllers were overbloated with non controller related code and were identical. It is important to reduce unnecessary code ahead of v4 API introduction
- Follow up commit will transform newly created module into a class following DI pattern
refs #12537
- Class syntax is preferred over module functions because of constructor parameter injection (DI) which allows for easier module decoupling and testing
refs #12537
- `stats` method in members controller is quite big and does much more then controller method code should - few calls to relevant modules
- Extracted code "as is" into members serivce
- Next step will be to refactor this module as a class pattern with DI parameters
refs https://github.com/TryGhost/Team/issues/446
Mailgun permanent failure events do not always correspond to unsubscribe-level events as originally thought, meaning some members could be unsubscribed unexpectedly due to delivery hiccups.
- disabled auto-unsubscribe on permanent failure events in the analytics event processor
- list maintenance will be added back in the future via alternative means
closes https://github.com/TryGhost/Ghost/issues/12492
The changes to email processing models had set replyTo address for an email batch as `reply_to` instead of `replyTo` which was not picked by mailgun service for setting newsletter reply address
refs https://github.com/TryGhost/Ghost-Utils/issues/118
- Duplicating error handling across jobs is not best developer experience. Also, having custom error handling logic did not allow for recommended worker script behavior: allowing for unhandled exceptions to bubble up and be managed by parent process
no issue
- sqlite will store a float in an integer column due to it's type affinity resulting in long decimal numbers in the UI when we're expecting an integer
- use the `ROUND()` function to ensure we're storing integers in place of floats when performing open rate average calculations
no-issue
This module encapsulates the work around performing imports, it
currently uses the concept of a "Job" which at the moment is not
persisted to the database, however when we want to look at resuming
imports after a server restart, this should give us the flexibility to
do it.
refs https://github.com/TryGhost/Ghost/issues/12461
- added two default aggregations for overall email count and opened email count
- when number of tracked emails is sufficient add the open rate aggregation to the update query
refs https://github.com/TryGhost/Ghost/issues/12421
requires https://github.com/TryGhost/Ghost/pull/12457
- updates stats aggregator to calculate and store an open rate for each member
- uses two queries because I couldn't find a reasonable approach to perform the update in a single query as per the email aggregation
- benchmarked locally at <1sec/1000members
- will not store an open rate unless the number of tracked emails sent to a member is above a certain threshold (defaults to 5) to avoid new members being heavily weighted
- fixes typo in EmailAnalytics that was stopping member stats from being aggregated
no issue
- job registration was checking for submitted emails in it's email count but the job registration method is called as soon as an email is created meaning the email has a status of 'pending' which prevented the analytics job from being started until a second email was sent
no issue
- email analytics may be desirable to fully switch off in certain circumstances, when that happens we want to prevent related background jobs from running and expose the feature flag via the config endpoint in the Admin API so that clients can adjust accordingly
no issue
- if emails are older than 30 days we wouldn't be able to fetch any analytics for them and if a site used emails in the past but is no longer using them it doesn't make sense to keep potentially expensive background worker threads spinning up
no issue
- recurring jobs spin up worker threads which can be quite CPU intensive even when not performing much processing, this can be problematic in environments where there are many Ghost instances running
- updated the email job scheduling to be skipped on bootup when there are no emails in the database and to be started when the first email is created as long as we're not in testing env
- increase analytics job schedule from every 2 minutes to every 5 minutes to help spread the load further across instances
- users imported from CSV with no created_at date where having their created_at date being stored as an int rather than a datetime.
- this was causing parsing issues with the graph so this commit fixes the formatting
no issue
- the 4.2.0 version of `sqlite3` that we're using is not compatible with `worker_threads`
- 5.0.0 should add support this but there are other errors
- 5.0.1 is released but not published (https://github.com/mapbox/node-sqlite3/issues/1386)
no issue
- added `EmailAnalyticsService`
- `.fetchAll()` grabs and processes all available events
- `.fetchLatest()` grabs and processes all events since the last seen event timestamp
- `EventProcessor` passed event objects and updates `email_recipients` or `members` records depending on the event being analytics or list hygiene
- always returns a `EventProcessingResult` instance so that progress can be tracked and merged across individual events, batches (pages of events), and total runs
- adds email_id and member_id to the returned result where appropriate so that the stats aggregator can limit processing to data that has changed
- sets `email_recipients.{delivered_at, opened_at, failed_at}` for analytics events
- sets `members.subscribed = false` for permanent failure/unsubscribed/complained list hygiene events
- `StatsAggregator` takes an `EventProcessingResult`-like object containing arrays of email ids and member ids on which to aggregate statistics.
- jobs for `fetch-latest` and `fetch-all` ready for use with the JobsService
- added `initialiseRecurringJobs()` function to Ghost bootup procedure that schedules the email analytics "fetch latest" job to run every minute
refs https://github.com/TryGhost/Ghost/issues/12256
We no longer want to filter out cancelled subscriptions, so we are able
to remove the whereIn clause of the relation.
* Fixed paid flag on member
* Fixed content gating for members
Now that the subscriptions for a member include all of them, we must
explicitly check that the member has an active subscription in order to
consider them "paid"
no issue
- the `'bulk-email`' tag was only being added to bulk emails if another more specific tag was set up via config
- we always want the `'bulk-email'` tag to be present for better event filtering
refs #12366
This implements redirection based on the settings for successful member sign up!
- Removes support for redirecting to `req.path` afterwards, this was never used and
we now have a more configurable implementation.
- Retains redirection to the homepage for unsuccessful sign up (invalid/expired token)
no-issue
We want to give users to ability to customise the content of their newsletter, and the first step
toward that is a setting in which we can store text or html to embed in the template
refs https://github.com/TryGhost/Ghost/issues/12355
- Adds new default settings for newsletter customisations - `newsletter_show_badge`, `newsletter_show_header` and `newsletter_body_font_category`
- Adds migrations to update group for new settings
- Add migration to update settings based on existing config value for newsletter settings
- Passes new newsletter settings to newsletter template and updates design based on them
- Fix tests
no-issue
* Used email_recipient_filter in MEGA
This officially decouples the newsletter recipients from the post
visibility allowing us to send emails to free members only
* Supported enum for send_email_when_published in model
This allows us to migrate from the previously used boolean to an enum
when we eventually rename the email_recipient_filter column to
send_email_when_published
* Updated the posts API to handle email_recipient_filter
We now no longer rely on the send_email_when_published property to send
newsletters, meaning we can remove the column and start cleaning up the
new columns name
* Handled draft status changes when emails not sent
We want to reset any concept of sending an email when a post is
transition to the draft status, if and only if, and email has not
already been sent. If an email has been sent, we should leave the email
related fields as they were.
* Removed send_email_when_published from add method
This is not supported at the model layer
* Removed email_recipient_filter from v2&Content API
This should not be exposed on previous api versions, or publicly
* Removed reference to send_email_when_published
This allows us to move completely to the email_recipient_filter
property, keeping the code clean and allowing us to delete the
send_email_when_published column in the database. We plan to then
migrate _back_ to the send_email_when_published name at both the
database and api level.
no issue
- set `emails.track_opens` to `true` when the `enableDeveloperExperiments` flag is set
- update mailgun bulk-email provider to pass the open-tracking header to Mailgun when the email's `track_opens` flag is set
no issue
- adding user variables via the mailgun API when sending emails means that events related to email have those variables attached to them
- adding the `email.id` value to user variables means we can easily associate mailgun events to emails, otherwise we'd have look up the batch via `email_batches.provider_id` then use a join to get back to the associated email
no issue
The email change verification template was using the same as for `subscribe`, which did not have the right messaging that needs to be communicated about the action thats happening in this case. Updates the email template to same as what we use for email verification for support/newsletter address
closes https://github.com/TryGhost/Ghost/issues/12253
- Allows using custom action param for requests from Portal by using a new `requestSrc` option that is passed down when a request for magic link is made via Portal
no refs.
- Members settings were moved to a new page [here](https://github.com/TryGhost/Ghost-Admin/pull/1736)
- updated members related redirect for from/newsletter email address change to point to new page
no issue
- In a case where support address is null, member's site data won't load as there was no fallback.
- The fix adds default `noreply` as the support address for site data
closes https://github.com/TryGhost/Ghost/issues/12257
- there was a destructuring problem introduced in the recent email refactor which meant the correct replacement data was not being passed over to the Mailgun provider when sending email
closes https://github.com/TryGhost/Ghost/issues/12259
- adds a `DISTINCT` to the query used to fetch member rows when generating an email recipient list
- this increases query time 2.7s vs 1.6s locally with ~94k paid members but once the `members.paid` column is implemented this slow query can be removed
no issue
- fixed passing of errors up through send/processBatch/processEmail
- fixed errant overwrite of email status with a "submitted" status after a failure had occurred
no issue
- wrap email batch/recipient record creation in a transaction so if an error occurs during creation we're not left with a partially created batch/recipient set in the database
no issue
- if an error occurred whilst creating email batch/recipient records the email status was never updated and was left in the 'pending' status
- adjusted the error handling to update the email status and record the error message if such a scenario occurs
no issue
- the paid-member SQL query that is obtained using `models.Member.getFilteredCollectionQuery({paid: true})` can return multiple columns with the same name (eg, `email`, `name`), when that happens the last column with duplicate names "wins" and it's value is used in the resulting knex row instance
- in the `mega` service when fetching email recipient rows we ran into this problem, to avoid it we adjust the query to explicitly select only the data from the `members` table
no issue
- we've had an issue with emails failing due to unexpectedly missing data when inserting email recipient rows
- added a validation check before adding recipient details along with a log so that invalid data can be investigated
no issue
- there was an typo in the recent email sending refactor that resulted in `Error: 'to' parameter is missing` errors when sending email previews and bulk emails
closes#12244
As per RFC 6454 the Origin header MUST be set to the string 'null' when
in a "privacy-sensitive" context. We were not handling this string and
this was causing errors. This commit updates all checks of the 'Origin'
header to treat the value 'null' as if the header was not present.
ref: https://tools.ietf.org/html/rfc6454#section-7.3
no issue
- store raw content in email record
- keep any replacement strings in the html/plaintext content so that it can be used when sending email rather than needing to re-serialize the post content which may have changed
- split post email serializer into separate serialization and replacement parsing functions
- serialization now returns any email content that is derived from the post content (subject/html/plaintext) rather than post content plus replacements
- `parseReplacements` has been split out so that it can be run against email content rather than a post, this allows mega and the email preview service to work with the stored email content
- move mailgun-specific functionality into the mailgun provider
- previously mailgun-specific behaviour was spread across the post email serializer, mega, and bulk-email service
- the per-batch `send` functionality was moved from the `bulk-email` service to the mailgun provider and updated to take email content, recipient info, and replacement info so that all mailgun-specific headers and replacement formatting can be handled in one place
- exposes the `BATCH_SIZE` constant because batch sizes are limited to what the provider allows
- `bulk-email` service split into three methods
- `send` responsible for taking email content and recipients, parsing replacement info from the email content and using that to collate a recipient data object, and finally coordinating the send via the mailgun provider. Usable directly for use-cases such as test emails
- `processEmail` takes an email ID, loads it and coordinates sending related batches concurrently
- `processEmailBatch` takes an email_batch ID, loads it along with associated email_recipient records and passes the data through to the `send` function, updating the batch status as it's processed
- `processEmail` and `processEmailBatch` take IDs rather than objects ready for future use by job-queues, it's best to keep job parameters as minimal as possible
- refactored `mega` service
- modified `getEmailData` to collate email content (from/reply-to/subject/html/plaintext) rather than being responsible for dealing with replacements and mailgun-specific replacement formats
- used for generating email content before storing in the email table, and when sending test emails
- from/reply-to calculation moved out of the post-email-serializer into mega and extracted into separate functions used by `getEmailData`
- `sendTestEmail` updated to generate `EmailRecipient`-like objects for each email address so that appropriate data can be supplied to the updated `bulk-email.send` method
- `sendEmailJob` updated to create `email_batches` and associated `email_recipients` records then hand over processing to the `bulk-email` service
- member row fetching extracted into a separate function and used by `createEmailBatches`
- moved updating of email status from `mega` to the `bulk-email` service, keeps concept of Successful/FailedBatch internal to the `bulk-email` service
requires https://github.com/TryGhost/Ghost/pull/12192
- added initial `EmailBatch` and `EmailRecipient` model definitions with defaults and relationships
- added missing `post` relationship function to email model
- fetch member list without bookshelf
- bookshelf can add around 3x overhead when fetching the members list for an email
- we don't need full members at this point, only having the data is fine
- if we need full models later on we can push the model hydration into background jobs where recipient batches are fetched ready for an email to be sent
- bookshelf model instantiation of many models blocks the event loop, using knex directly keeps concurrent requests fast
- adds `getFilteredCollectionQuery` method to base model to facilitate getting a knex query based on our normal model filters along with transaction/forUpdate applied
- store recipient list before sending email
- chunk already-fetched members list into batches and insert records into the `email_recipients` table via knex
- chunked into batches of 1000 to match the number of emails that Mailgun accepts in a single API request but this may not be the absolute fastest batch size for recipient insertion:
| Batch size | Batch time | Total time |
| ---------- | ---------- | ---------- |
| 500 | 20ms | 4142ms |
| 1000 | 50ms | 4651ms |
| 5000 | 170ms | 3540ms |
| 10000 | 370ms | 3684ms |
- create an email_batch record before inserting recipient rows so we can effeciently fetch recipients by batch and store the overall batch status
no issue
- The accent_color setting was being removed from members site data when behind portal flag
- The accent color setting is now allowed in members site data for all cases as it doesn't make any sense to remove it specifically from here where we already have all the other Portal settings included which is a dev/portal flag feature anyways
closes#12038
Previously we were emitting changed events for _all_ settings which would
cause any listeners for those to be triggered, this ensures that listeners are
only triggered if the corresponding setting, _did_ in fact change.
refs #11878
- When password reset link is invalid previous messaging left the user
without clear information about why the reset failed and what they could do about it.
- Updated messaging around password reset tokens including detection of
when password token has invalid structure, has expired or has already
been used
This reverts commit 80af56b530.
- reverting temporarily so that all associated functionality can be merged in a single release
- creating email batch/recipient records without using them would cause inconsistent data
no-issue
* Added SingleUseTokenProvider to members service
This implements the TokenProvider interface required by members-api to
generate magic links. It handles checking if the token is expired and
pulls out any associated data.
Future improvments may include the email in the error for expired
tokens, which would make resending a token simpler.
* Passed SingleUseTokenProvider to members-api
This sets up the members-api module to use the new single use tokens
* Installed @tryghost/members-api@0.30.0
This includes the change to allow us to pass a token provider to the members-api
no issue
- In a recent change to ownership verification email flow, we changed the FROM address of ownership verification mails to use the same email as the one we are verifying, aka TO address.
- Email clients like Gmail flags off such emails as possible spam
- Fix updates the `FROM` address to `noreply@domain.com` where domain.com is domain for TO address
- In case the TO is already noreply@domain.com, we use no-reply@domain.com to bypass the same address restriction.
no issue
- Members site data was not appending blog domain for default support address which is `noreply`
- The change allows Portal to use default support address correctly
requires https://github.com/TryGhost/Ghost/pull/12192
- added initial `EmailBatch` and `EmailRecipient` model definitions with defaults and relationships
- added missing `post` relationship function to email model
- fetch member list without bookshelf
- bookshelf can add around 3x overhead when fetching the members list for an email
- we don't need full members at this point, only having the data is fine
- if we need full models later on we can push the model hydration into background jobs where recipient batches are fetched ready for an email to be sent
- bookshelf model instantiation of many models blocks the event loop, using knex directly keeps concurrent requests fast
- store recipient list before sending email
- chunk already-fetched members list into batches and insert records into the `email_recipients` table via knex
- chunked into batches of 1000 to match the number of emails that Mailgun accepts in a single API request but this may not be the absolute fastest batch size for recipient insertion:
| Batch size | Batch time | Total time |
| ---------- | ---------- | ---------- |
| 500 | 20ms | 4142ms |
| 1000 | 50ms | 4651ms |
| 5000 | 170ms | 3540ms |
| 10000 | 370ms | 3684ms |
- create an email_batch record before inserting recipient rows so we can effeciently fetch recipients by batch and store the overall batch status
closes#12045
- When member's email is updated to an already existing email of different member it caused table's unique constraint error, which was not handled properly.
- Added handling for this error similar to one in members `add` method.
closes#11999
- When the routes.yaml file changes (manually or through API) we need
to store a checksum to be able to optimize routes reloads in the future
- Added mechanism to detect differences between stored and current routes.yaml hash value
- Added routes.yaml sync on server boot
- Added routes.yaml handling in controllers
- Added routes hash synchronization method in core settings. It lives in core settings
as it needs access to model layer. To avoid coupling with the frontend settings it accepts
a function which has to resolve to a routes hash
- Added note about settings validation side-effect. It mutates input!
- Added async check for currently loaded routes hash
- Extended frontend settings loader with async loader. The default behavior of the loader is
to load settings syncronously for reasons spelled in 0ac19dcf84
To avoid blocking the eventloop added async loading method
- Refactored frontend setting loader for reusability of settings file path
- Added integrity check test for routes.yaml file
closes#12060
- A 500 error what happening when invited user provided an email that is associated with an existing user
- Additional validation for existing email address was added to prevent invalid data hitting db constraint error
closes https://github.com/TryGhost/members.js/issues/94
- The member-api package was recently updated to work directly with models and needs explicit `withRelated` options to attack relations
- Without options, the endpoint was returning the default member data without subscriptions attached, which in Portal showed paid member as free
- Fix updates the middleware for updating member data to correctly pass the relations needed to populate the member
no issue
- By default for new sites, support address is set same as from address to `noreply` , with full email address using the domain for `@`
- For newsletter emails, the support address was missing the default site domain to be added to address if its `noreply`
- Fix updates the support address to use the same format as from address and add relevant domain for default case
no refs
- The `update` method in members-api package was edited to return Model object instead of JSON directly - TryGhost/Members@a28bcc5
- This unsubscribe handler was returning the raw member object returned from `update` method, which is now a model object and not able to access `member.email`
- Fix updates the unsubscribe request handler to return the member JSON again
no issue
- We used existing "from" address as sender for mails sent to new email address for verification, but that breaks the flow to update if the current "from" address has DMARC policy set.
- This updates the flow to always send the ownership verification email TO the new address and FROM the new address which both verifies the email deliverability for new address and ownership
no issue
- The newsletter emails are sent out with `from` address as sender
- The new `members_reply_address` setting is now used to set reply-to address for emails, which can be either newsletter or support address
no issue
- Member auth emails were previously using the `from` address as sender
- New `members_support_address` was introduced with default as original "from" address
- Auth emails use the new support address as sender
no issue
- Updated magic link generation and validation methods for email update API to handle new support address
- Updated importer to ignore the new support address as it can only be updated via verification
- Updated members service to listen on settings edit for new support/reply address fields as well
- Updated tests to include the new settings
no issue
- Added default settings for the two new setting fields - `members_support_address` and `members_reply_address`
- Added migrations for setting group for new email settings
- Migration sets current from address as new support address default
- Added migration to set new support address same as from address
- Updated tests for new settings
- `members_support_address` - How members can reach for help with their account, public setting
- `members_reply_address` - Where you receive responses to newsletters
no issue
- When an import was done and there were no "global labels" present Ghost created generic `import-[data]` label which later helped to find a specific batch of imported data
- It did not make sense to create such generic label when user provided their own unique label
- The rules that work now are:
1. When there is no global provided Ghost generates on and removes it in case there are no imported records
2. When there is a unique new global label provided no new label is generated, but the label stays even if there are no imported records
no issue
- tested performance between knex raw, knex `count()` and bookshelf `count()` and found no difference over 1000 iterations of each (each ~19,500ms +- 500ms for 104k members locally)
- switched to using bookshelf as the code is the simplest
no issue
- This is handled on input sanitization layer with date
format check in JSON schema validation, so there's no need to do this
check again in the importer.
no issue
- When bulk insert fails there is no transactional logic to revert
related records form being inserted. Also, previously there were no
attempts to "retry" the insert.
- To avoid complex retry logic, an iterative one-by-one insert retry
approach was taken. If this becomes a bottleneck in the future, the
retry algorithm could be improved.
- To avoid a lot of code duplication refactored model's `bulkAdd` & `bulkDestroy`
methods to use 'bulk-operations' module.
- Updated error handling and logging for bulk delete operations. It's very
unlikely for error to happen here, but still need to make sure there is
a proper logging in place to trace back the failure.
- Added debug logs. This should improve debugging experience and
performance measurements.
- Added handling for unrecognized errors. Handling inspired by current unrecognized
error handling by ghost importer -10e5d5f3d4/core/server/data/importer/importers/data/base.js (L148-L154)
no issue
- updates `@tryghost/kg-default-cards` which contains two fixes
- removes email-specific output being added to post html (had no visual impact due to use of conditional comments but keeps rendered html smaller+cleaner)
- adds a background-url style to the thumbnail container to give two options for styling
- updates member email template styling to hide the `<img>` element in bookmark cards and use a background image instead to get consistent rendering across email clients
no issue
- adds a `members:emailTemplate` config object
- `showSiteHeader` - defaults to `true`, shows the site title and icon in member emails
- `showPoweredBy` - defaults to `false`, adds a "Publish with Ghost" button to member email footer
- updates member newsletter email template with hideable site header and "powered by" badge
closes https://github.com/TryGhost/members.js/issues/87
- The `update` method in members-api package was edited to return Model object instead of JSON directly [here](a28bcc5b2a)
- This caused the update member API on member endpoint to return partial response only as most properties couldn't be fetched
- Fix updates the middleware to correctly call `toJSON` before formatting response
no issue
- Similar handling to one introduced in 8418c829de
- Having granular tracking for failed to remove id's would make it possible to return more specific errors to the client
no issue
- When batch insert fails handling should be more granular and aim to retry and insert as many records from the batch as possible.
- Added retry logic for failed member's batch inserts. It's a sequential insert for each record in the batch. This implementation was chosen to keep it as simple as possible
- Added filtering of "toCreate" records when member fails to insert. We should not try inserting related members_labels/members_stripe_customers/members_stripe_customer_subscriptions records because they would definitely fail insertion without associated member record
no issue
- When stripe is disconnected and there are Stripe-connected records present in imported set they should not be processed and proper error should be thrown
closes https://github.com/TryGhost/Ghost/issues/12139
- once the email content has been rendered in the post serializer, perform some whole-content transformation of `figure` and `figcaption` to `div` using cheerio
- juiced will have already inlined the elements styles so there's no need to adjust the template's stylesheet
closes#12078
- Root cause was that pseudo class .kg-bookmark-author:after was not getting inlined to email newsletter or its preview.
- That is where the margin and bullet-point content are added between author and publisher.
- Dependency juice supports an option inlinePseudoElements which is false by default.
- Fix was to set inlinePseudoElements to true when serializing post email.
Co-authored-by: Jeremy Davidson <jeremy@crossingcontour.com>
closes https://github.com/TryGhost/Ghost/issues/11536
- bumps `@tryghost/kg-default-cards`
- image and gallery cards now output `width/height` attributes on `img` elements with a max width of 600px
- uses resized images where possible to keep email weight down
- adds `height: auto` style to image card images so that the `height` attribute does not cause distortion at smaller screen widths
no-issue
* Added bulkAdd method to Member,Customer&Subscription model
This allows us to keep the db access in the model layer
* Updated @tryghost/members-api to 0.27.2
This includes fixes for rate-limiting of requests, and exposes necessary
Stripe methods for creating customers and complimentary subscriptions,
without affecting the database.
* Refactored importer to parallelise tasks where possible
By parallelising our tasks we are able to improve the speed at which the
entire import completes.
no issue
- There were many failed import records due to rate-limit errors. With concurrency of 9 imports go through with 100% success
- Would need to verify these limits with live API to make the most of it
no issue
- we output the post excerpt in a hidden div in the email template so that email clients pick it up as the "preview" text when listing emails
- when no custom excerpt is provided the preview text is grabbed from post.excerpt which is the first 500 chars of the post.plaintext value
- post.plaintext formats links as "Link [http://url/]" which is unwanted in html email previews
- add a basic replacement to the post email serializer to remove any `[http://url/]` occurrences from the post excerpt before rendering the email content
refs https://github.com/TryGhost/Ghost/issues/11536
- Outlook supports `'` as a special char for apostrophes but not `&#apos;` which is what cheerio/juiced render
- adds a basic string placement to the email serializer to switch to the older style of special char
no issue
- moves the meat of `pendingEmailHandler()` code into a new function `sendEmailJob()` that is passed over to the new job service
- lets the server keep processing email generation and sending when it receives a shutdown request rather than halting processing mid-send and ending up in a partial state
no-issue
* Added stripeSubscriptions relation to member model
This allows us to fetch the subscriptions for a member via standard
model usage, e.g. `withRelated: ['stripeSubscriptions']` rather than
offloading to loops and `decorateWithSubscriptions` functions, this is
more performant and less non-standard than the existing method.
* Updated serialize methods to match existing format
The current usage of `decorateWithSubscriptions` and the usage of
members throughout the codebase has a subscriptions array on a stripe
object on the member, this ensures that when we serialize members to
JSON that we are using the same format.
There is definitely room to change this in future, but this is an
attempt to create as few breaking changes as possible.
* Installed @tryghost/members-api@0.26.0
This includes the required API changes so that everywhere can use
members-api directly rather than models and/or helper methods
no issue
- The code in controller was becoming hard to reason about.
- Having a single module shows exactly how many dependencies are there to do an import for single batch.
- Having a separate module would make it easier to extract into it's own package in Members monorepo
- Bottom line - we need to manage shutting down gracefully when doing long-running tasks
- To achieve that, we're going to use job queues
In this commit:
- added new @tryghost/job-manager dependency
- added a minimal job service, that handles in passing things like logging and (maybe later) config
- job service is wired up to server shutdown, so that the queue finishes before the server exits
- also added a new job endpoint to testmode so that it's easy to test job behaviour without needing to do real work
- deleted files under `core/server/lib/promise` and related test files
- added `@tryghost/promise` as a dependency
- fixed all local requires to point to the new package
no-issue
- switch from `membersService.api.members.list` to using bookshelf `Member.findPage()` with the `{paid: true}` filter to avoid per-member queries (N+1) to decorate members with subscriptions and a heavy post-fetch filter via `contentGating`
- add concurrency to the Mailgun API requests in `bulk-email` service to reduce overall time submitting API requests
- add debug statements with timing output for easier measurements
closes#11907
The image in the bookmark card was being shown out of the bounds of
the card because of a general style `height: auto !important`.
I added a new `max-height` property to the image to avoid exceeding
parent height.
no issue
- `mailgun()` expects the `host` option not to include a port but `url.host` will include the port, we instead want to use `url.hostname` which skips the port
- Member limit code was duplicated in 2 places unnecessarily
- Also used member api code that fetched members and subscriptions fully hyrated when we only need a count
- Using a raw query significantly improves performance here
- mailgun has a testmode flag we can use to get email to be accepted but not delivered
- this is useful for developers testing general bulk email code - not for users - so it is only available via config
refs https://github.com/TryGhost/members.js/issues/72
- Portal is using using publication logo from settings for signup/signin pages
- Instead, we are switching to using publication icon from settings, which also needs to be passed in site data API
refs #12074
Since we've split members settings into multiple keys the
reconfiguration of the members-api has been happening in quick
succession as the stripe_connect_* settings are all set at once.
This debounces the call to reconfigure the members-api so that we only
need to instantiate it once.
no issue
- By default, GhostMailer throws EmailError with statusCode as `500` for any failure in sending mail
- In case of failure due to `RecipientError`, status code as now correctly sent as `400` as its a bad request and not an error we can't handle.
refs https://github.com/TryGhost/Ghost/issues/11971
- Added statusCode from bulk email provider to API response
- Updated error messages for different bulk email(mailgun) failure states
- Added `context` to preview mail API error message with mail provider's error message
refs #12043
- On updating From-address from Members settings in Labs, we send a confirmation email to the updated address with magic link for verification
- Previously, no explicit sender email was being set for this so fallback config address was used
- This updates the sender address to use the current from address for "from-address" update emails
no-issue
- Added breaking test for webhook url including subdirectory
- Previously the webhook handler URL was generated incorrectly when
running Ghost on a subdirectory, appending the path to the root of the
host, this fix ensures that the subdirectory is included before the
path.
no-issue
This version of members-api includes changes to how webhooks are
managed, previously they would be deleted and recreated on every boot of
Ghost. Now they are created and the secret is persisted, on boot the
webhook is updated to the most current url and events. If the api
version is wrong or the update fails, the webhook is deleted and
recreated and the settings updated.
- Installed @tryghost/members-api@0.24.0
- Updated config to work with 0.24.0
no-issue
There is concern that the settings cache can return `null` for values
which it cannot parse correctly, this just ensures that we always have
an array where we expect one
no issue
- Adds new portal button settings to members site data for portal script
- Updates settings input/output serializers to handle portal icon image url
* tag '3.22.2':
v3.22.2
Updated Ghost-Admin to v3.22.2
Emitted all settings events on reinit of cache (#12012)
🐛 Updated access to be true by default in v3 API
Hardened members subscription migration against missing data (#12009)
closes#12003
There are a few parts of Ghost that rely on the settings events being
emitted anytime a setting is changed, so that the data is kept in sync.
When a setting is renamed in a migration essentially what happens is
that the settings value is changed from a default value to its actual
value, but this does no emit an event.
Anything that is initialised before migrations have run that relies on
the events to keep it up to date will have stale data - e.g. the themes
i18n service.
This change ensures that when we `reinit` after migrations have been
run, we emit events for every setting to tell the rest of Ghost that it
has changed.
refs https://github.com/TryGhost/Ghost/issues/10318
- re-initialize settings cache after migrations by shutting down to clean up event listeners then and calling `init` again
- important to ensure `db.ready` event is not emitted until settings have finished re-initializing to avoid problems with background processes using the db connection which is disconnected/re-connected or being kicked off with out-of-date settings
* Updated members default settings
ref #10318
This pulls out the members_subscription_settings & stripe_connect_intgration settings into separate keys
* Updated usage of members_from_address
* Updated stripe_connect usage
* Updated members config to use new settings
* Updated members middleware to use isStripeConnected
* Updated members service to reload correctly
We reload the members-api instance when the related settings change, so
this makes sure we're listening to the correct settings changes
* Updated ghost_head helper to use new settings
* Updated theme middleware to use new settings
* Renamed members_allow_signup -> members_allow_free_signup
* Fixed tests after settings refactor
* Removed from direct key settings key
* Fixed regression tests for settings api
refs #10318
refs 2614565d5a
- Renamed ghost_head/ghost_foot in settings to match the new names
introduced in migrations
- Above change lead to reshufling in the mappings in input/output
serializers
- Makes sure change is compatible with v2 API
refs https://github.com/TryGhost/Ghost/issues/10318
refs 2614565d5a
- Renames to match referenced migration renames
- Fixed API responses so they are consistent with newly renamed fields
- Not returning lang and timezone keys from settings in API v2 ther rest should be returned in API v3/canary
refs https://github.com/TryGhost/Ghost/issues/10318
- precursor to migrating from `settings.type` to `settings.group`
- renames `blog` type to `site`
- renames `bulk_email` type to `email`
- moves settings out of `site` (previously `blog`) into more appropriate groups such as `core` or individual feature groups
no issue
- reverts commit 87c31444fd but with modifications to settings naming
- Adds new settings for members modal customization to default settings
- `portal_button` controls the visibility of beacon in members modal
- `portal_name` controls the visibility of name field in signup
- `portal_plans` controls the visibility of plans allowed for member to signup with
- Adds stripe connect check to determine if stripe is setup or not
- Adds the 3 new settings to members site data
- Updates to snake case naming for members site API data
no issue
- Adds new settings for members modal customization to default settings
- `membersjs_show_beacon` controls the visibility of beacon in members modal
- `membersjs_show_signup_name` controls the visibility of name field in signup
- `membersjs_allowed_plans` controls the visibility of plans allowed for member to signup with
- Adds stripe connect check to determine if stripe is setup or not
- Adds the 3 new settings to members site data
