MeshCentral/exeHandler.js
2018-01-19 18:04:54 -08:00

309 lines
15 KiB
JavaScript

/*
Copyright 2018 Intel Corporation
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
const exeJavaScriptGuid = 'B996015880544A19B7F7E9BE44914C18';
const exeMeshPolicyGuid = 'B996015880544A19B7F7E9BE44914C19';
// Changes a Windows Executable to add JavaScript inside of it.
// This method will write to destination stream and close it.
//
// options = {
// platform: 'win32' or 'linux',
// sourceFileName: 'pathToBinary',
// destinationStream: 'outputStream'
// js: 'jsContent',
// peinfo {} // Optional, if PE header already parsed place it here.
// }
//
module.exports.streamExeWithJavaScript = function (options) {
// Check all inputs
if (!options.platform) { throw ('platform not specified'); }
if (!options.destinationStream) { throw ('destination stream was not specified'); }
if (!options.sourceFileName) { throw ('source file not specified'); }
if (!options.js) { throw ('js content not specified'); }
// If a Windows binary, parse it if not already parsed
if ((options.platform == 'win32') && (!options.peinfo)) { options.peinfo = require('PE_Parser')(options.sourcePath); }
// If unsigned Windows or Linux, we merge at the end with the GUID and no padding.
if ((options.platform == 'win32' && options.peinfo.CertificateTableAddress == 0) || options.platform != 'win32') {
// This is not a signed binary, so we can just send over the EXE then the MSH
options.destinationStream.sourceStream = require('fs').createReadStream(options.sourceFileName, { flags: 'r' });
options.destinationStream.sourceStream.options = options;
options.destinationStream.sourceStream.on('end', function () {
// Once the binary is streamed, write the msh + length + guid in that order.
this.options.destinationStream.write(this.options.js); // JS content
var sz = Buffer.alloc(4);
sz.writeUInt32BE(this.options.js.length, 0);
this.options.destinationStream.write(sz); // Length in small endian
this.options.destinationStream.end(Buffer.from(exeJavaScriptGuid, 'hex')); // GUID
});
// Pipe the entire source binary without ending the stream.
options.destinationStream.sourceStream.pipe(options.destinationStream, { end: false });
} else {
throw ('js content not specified');
}
}
// Changes a Windows Executable to add the MSH inside of it.
// This method will write to destination stream and close it.
//
// options = {
// platform: 'win32' or 'linux',
// sourceFileName: 'pathToBinary',
// destinationStream: 'outputStream'
// msh: 'mshContent',
// peinfo {} // Optional, if PE header already parsed place it here.
// }
//
module.exports.streamExeWithMeshPolicy = function (options) {
// Check all inputs
if (!options.platform) { throw ('platform not specified'); }
if (!options.destinationStream) { throw ('destination stream was not specified'); }
if (!options.sourceFileName) { throw ('source file not specified'); }
if (!options.msh) { throw ('msh content not specified'); }
// If a Windows binary, parse it if not already parsed
if ((options.platform == 'win32') && (!options.peinfo)) { options.peinfo = require('PE_Parser')(options.sourcePath); }
// If unsigned Windows or Linux, we merge at the end with the GUID and no padding.
if ((options.platform == 'win32' && options.peinfo.CertificateTableAddress == 0) || options.platform != 'win32') {
// This is not a signed binary, so we can just send over the EXE then the MSH
options.destinationStream.sourceStream = require('fs').createReadStream(options.sourceFileName, { flags: 'r' });
options.destinationStream.sourceStream.options = options;
options.destinationStream.sourceStream.on('end', function () {
// Once the binary is streamed, write the msh + length + guid in that order.
this.options.destinationStream.write(this.options.msh); // MSH
var sz = Buffer.alloc(4);
sz.writeUInt32BE(this.options.msh.length, 0);
this.options.destinationStream.write(sz); // Length in small endian
this.options.destinationStream.end(Buffer.from(exeMeshPolicyGuid, 'hex')); // Guid
});
// Pipe the entire source binary without ending the stream.
options.destinationStream.sourceStream.pipe(options.destinationStream, { end: false });
} else if (options.platform == 'win32' && options.peinfo.CertificateTableAddress != 0) {
// This is a signed windows binary, so we need to do some magic
options.mshPadding = (8 - ((options.peinfo.certificateDwLength + options.msh.length + 20) % 8)) % 8; // Compute the padding with quad-align
//console.log('old table size = ' + options.peinfo.CertificateTableSize);
options.peinfo.CertificateTableSize += (options.msh.length + 20 + options.mshPadding); // Add to the certificate table size
//console.log('new table size = ' + options.peinfo.CertificateTableSize);
//console.log('old certificate dwLength = ' + options.peinfo.certificateDwLength);
options.peinfo.certificateDwLength += (options.msh.length + 20 + options.mshPadding); // Add to the certificate size
//console.log('new certificate dwLength = ' + options.peinfo.certificateDwLength);
//console.log('values were padded with ' + options.mshPadding + ' bytes');
// Read up to the certificate table size and stream that out
options.destinationStream.sourceStream = require('fs').createReadStream(options.sourceFileName, { flags: 'r', start: 0, end: options.peinfo.CertificateTableSizePos - 1 });
options.destinationStream.sourceStream.options = options;
options.destinationStream.sourceStream.on('end', function () {
// We sent up to the CertificateTableSize, now we need to send the updated certificate table size
//console.log('read first block');
var sz = Buffer.alloc(4);
sz.writeUInt32LE(this.options.peinfo.CertificateTableSize, 0);
this.options.destinationStream.write(sz); // New cert table size
// Stream everything up to the start of the certificate table entry
var source2 = require('fs').createReadStream(options.sourceFileName, { flags: 'r', start: this.options.peinfo.CertificateTableSizePos + 4, end: this.options.peinfo.CertificateTableAddress - 1 });
source2.options = this.options;
source2.on('end', function () {
// We've sent up to the Certificate DWLength, which we need to update
//console.log('read second block');
var sz = Buffer.alloc(4);
sz.writeUInt32LE(this.options.peinfo.certificateDwLength, 0);
this.options.destinationStream.write(sz); // New certificate length
// Stream the entire binary until the end
var source3 = require('fs').createReadStream(options.sourceFileName, { flags: 'r', start: this.options.peinfo.CertificateTableAddress + 4 });
source3.options = this.options;
source3.on('end', function () {
// We've sent the entire binary... Now send: Padding + MSH + MSHLength + GUID
//console.log('read third block');
if (this.options.mshPadding > 0) { this.options.destinationStream.write(Buffer.alloc(this.options.mshPadding)); } // Padding
this.options.destinationStream.write(this.options.msh); // MSH content
var sz = Buffer.alloc(4);
sz.writeUInt32BE(this.options.msh.length, 0);
this.options.destinationStream.write(sz); // MSH Length, small-endian
this.options.destinationStream.end(Buffer.from(exeMeshPolicyGuid, 'hex')); // MSH GUID
});
source3.pipe(this.options.destinationStream, { end: false });
this.options.sourceStream = source3;
});
source2.pipe(this.options.destinationStream, { end: false });
this.options.destinationStream.sourceStream = source2;
});
this.options.destinationStream.sourceStream.pipe(this.options.destinationStream, { end: false });
}
}
// Return information about this executable
// This works only on Windows binaries
module.exports.parseWindowsExecutable = function (exePath) {
var retVal = {};
var fs = require('fs');
var fd = fs.openSync(exePath, 'r');
var bytesRead;
var dosHeader = Buffer.alloc(64);
var ntHeader = Buffer.alloc(24);
var optHeader;
// Read the DOS header
bytesRead = fs.readSync(fd, dosHeader, 0, 64, 0);
if (dosHeader.readUInt16LE(0).toString(16).toUpperCase() != '5A4D') { throw ('unrecognized binary format'); }
// Read the NT header
bytesRead = fs.readSync(fd, ntHeader, 0, ntHeader.length, dosHeader.readUInt32LE(60));
if (ntHeader.slice(0, 4).toString('hex') != '50450000') {
throw ('not a PE file');
}
switch (ntHeader.readUInt16LE(4).toString(16)) {
case '14c': // 32 bit
retVal.format = 'x86';
break;
case '8664': // 64 bit
retVal.format = 'x64';
break;
default: // Unknown
retVal.format = undefined;
break;
}
retVal.optionalHeaderSize = ntHeader.readUInt16LE(20);
retVal.optionalHeaderSizeAddress = dosHeader.readUInt32LE(60) + 20;
// Read the optional header
optHeader = Buffer.alloc(ntHeader.readUInt16LE(20));
bytesRead = fs.readSync(fd, optHeader, 0, optHeader.length, dosHeader.readUInt32LE(60) + 24);
var numRVA = undefined;
retVal.CheckSumPos = dosHeader.readUInt32LE(60) + 24 + 64;
retVal.SizeOfCode = optHeader.readUInt32LE(4);
retVal.SizeOfInitializedData = optHeader.readUInt32LE(8);
retVal.SizeOfUnInitializedData = optHeader.readUInt32LE(12);
switch (optHeader.readUInt16LE(0).toString(16).toUpperCase()) {
case '10B': // 32 bit binary
numRVA = optHeader.readUInt32LE(92);
retVal.CertificateTableAddress = optHeader.readUInt32LE(128);
retVal.CertificateTableSize = optHeader.readUInt32LE(132);
retVal.CertificateTableSizePos = dosHeader.readUInt32LE(60) + 24 + 132;
retVal.rvaStartAddress = dosHeader.readUInt32LE(60) + 24 + 96;
break;
case '20B': // 64 bit binary
numRVA = optHeader.readUInt32LE(108);
retVal.CertificateTableAddress = optHeader.readUInt32LE(144);
retVal.CertificateTableSize = optHeader.readUInt32LE(148);
retVal.CertificateTableSizePos = dosHeader.readUInt32LE(60) + 24 + 148;
retVal.rvaStartAddress = dosHeader.readUInt32LE(60) + 24 + 112;
break;
default:
throw ('Unknown Value found for Optional Magic: ' + ntHeader.readUInt16LE(24).toString(16).toUpperCase());
}
retVal.rvaCount = numRVA;
if (retVal.CertificateTableAddress) {
// Read the authenticode certificate, only one cert (only the first entry)
var hdr = Buffer.alloc(8);
fs.readSync(fd, hdr, 0, hdr.length, retVal.CertificateTableAddress);
retVal.certificate = Buffer.alloc(hdr.readUInt32LE(0));
fs.readSync(fd, retVal.certificate, 0, retVal.certificate.length, retVal.CertificateTableAddress + hdr.length);
retVal.certificate = retVal.certificate.toString('base64');
retVal.certificateDwLength = hdr.readUInt32LE(0);
}
fs.closeSync(fd);
return (retVal);
}
//
// Hash a executable file. Works on both Windows and Linux.
// On Windows, will hash so that signature or .msh addition will not change the hash. Adding a .js on un-signed executable will change the hash.
//
// options = {
// sourcePath: <string> Executable Path
// targetStream: <stream.writeable> Hashing Stream
// platform: <string> Optional. Same value as process.platform ('win32' | 'linux' | 'darwin')
// }
//
module.exports.hashExecutableFile = function (options) {
if (!options.sourcePath || !options.targetStream) { throw ('Please specify sourcePath and targetStream'); }
var fs = require('fs');
// If not specified, try to determine platform type
if (!options.platform) {
try {
// If we can parse the executable, we know it's windows.
options.peinfo = module.exports.parseWindowsExecutable(options.sourcePath);
options.platform = 'win32';
} catch (e) {
options.platform = 'other';
}
}
// Setup initial state
options.state = { endIndex: 0, checkSumIndex: 0, tableIndex: 0, stats: fs.statSync(options.sourcePath) };
if (options.platform == 'win32')
{
if (options.peinfo.CertificateTableAddress != 0) { options.state.endIndex = options.peinfo.CertificateTableAddress; }
options.state.tableIndex = options.peinfo.CertificateTableSizePos - 4;
options.state.checkSumIndex = options.peinfo.CheckSumPos;
}
if (options.state.endIndex == 0) {
// We just need to check for Embedded MSH file
var fd = fs.openSync(options.sourcePath, 'r');
var guid = Buffer.alloc(16);
var bytesRead;
bytesRead = fs.readSync(fd, guid, 0, guid.length, options.state.stats.size - 16);
if (guid.toString('hex') == exeMeshPolicyGuid) {
bytesRead = fs.readSync(fd, guid, 0, 4, options.state.stats.size - 20);
options.state.endIndex = options.state.stats.size - 20 - guid.readUInt32LE(0);
} else {
options.state.endIndex = options.state.stats.size;
}
fs.closeSync(fd);
}
// Linux does not have a checksum
if (options.state.checkSumIndex != 0) {
// Windows
options.state.source = fs.createReadStream(options.sourcePath, { flags: 'r', start: 0, end: options.state.checkSumIndex - 1 });
options.state.source.on('end', function () {
options.targetStream.write(Buffer.alloc(4));
var source = fs.createReadStream(options.sourcePath, { flags: 'r', start: options.state.checkSumIndex + 4, end: options.state.tableIndex - 1 });
source.on('end', function () {
options.targetStream.write(Buffer.alloc(8));
var source = fs.createReadStream(options.sourcePath, { flags: 'r', start: options.state.tableIndex + 8, end: options.state.endIndex - 1 });
options.state.source = source;
options.state.source.pipe(options.targetStream);
});
options.state.source = source;
options.state.source.pipe(options.targetStream, { end: false });
});
options.state.source.pipe(options.targetStream, { end: false });
} else {
// Linux
options.state.source = fs.createReadStream(options.sourcePath, { flags: 'r', start: 0, end: options.state.endIndex - 1 });
options.state.source.pipe(options.targetStream);
}
}