[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/182675703)
This PR implements the actual integration of the breadcrumbs panel with the component list panel. A special breadcrumbs controller (`controller::searcher::breadcrumbs`) is tracking the currently opened module with a list of its parents. The searcher presenter uses the API of the controller to sync the displayed list of breadcrumbs with the controller state.
https://user-images.githubusercontent.com/6566674/193064122-7d3fc4d6-9148-4ded-a73e-767ac9ac83f8.mp4
# Important Notes
- There is an `All` breadcrumb displayed at all times at the beginning of the list. It will be replaced with a section name as part of [Section Title on Component Browser's Breadcrumbs Panel](https://www.pivotaltracker.com/story/show/182610561) task.
- I changed the implementation of `project::main_module_id`, `project::QualifiedName::main_module`, and `API::main_module` so that they are logically connected which each other.
- I adjusted the Breadcrumbs View to avoid "appearance" animation glitches when opening new modules. `set_entries` was replaced with the `set_entries_from` endpoint.
When nodes get invalidated in the cache, they have to be recomputed. Let the IDE know which of the nodes are pending by sending `Api.ExpressionUpdate.Payload.Pending` message.
# Important Notes
This PR introduces new `Api.ExpressionUpdate.Payload.Pending` message. This message is delivered before re-computation of nodes. Later `Api.ExpressionUpdate.Payload.Value` or other is sent to notify the IDE that a value for given node is available.
Trivial implementation of of the `Api.ExpressionUpdate.Payload.Pending` message in the IDE is provided by this PR to (improperly) visualize pending node status - further improvements needed in follow up PRs.
This PR disables the wasm-opt optimization in the crates that can be used as WASM entry points. Unfortunately, wasm-pack does not allow for disabling wasm-opt through a command line flag, so we have to disable it by setting an appropriate flag in each Cargo.toml.
Show the visualization when a newly created node is being edited. Hide it after the editing is finished, unless the user explicitly changed the state of the visualization.
https://www.pivotaltracker.com/story/show/182634059
#### Visuals
The following video shows the behavior of the visualization when a new node is created by the user and is being edited:
- By default, the visualization is shown when the node becomes edited and disappears when the node's expression is accepted.
- If the user clicks the visualization toggle button once while editing the node, the visualization disappears and stays disabled after the node's expression is accepted.
- If the user clicks the visualization toggle button twice while editing the node, the visualization is visible and stays enabled after the node's expression is accepted.
This PR is not concerned with the correctness of the contents of the visualization window. This is in line with the current behavior on the `develop` branch, where clicking the visualization toggle button while editing a newly created node shows `null` content in the visualization (even if the edited expression is not null).
https://user-images.githubusercontent.com/273837/191294970-62143983-764a-446c-9616-9765de0923bf.mov
This PR contains an entry definition for Grid View to be used inside Component List Panel View. The Example grid view with the entry definition may be seen on new_component_list_panel_view debug scene.
https://user-images.githubusercontent.com/3919101/190663278-23c35ab0-f426-4001-8128-df7147aafb9e.mp4
# Important Notes
* The styling is not detailed yet due to time constraints (I want to move to integration this grid view to Component Panel List ASAP) and the fact that I could not get new mplus1 font working with text Area.
* Implementing this required adding a "contour offset" feature to the Grid View.
[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/181870304).
This PR implements Controller-level support for entering modules in the component browser.
Clicking headers/entries opens the module, filling the Local Scope and Submodules sections.
Please ignore multiple visual issues with the component browser on the screen - this PR does not cause them, and they will be fixed soon when we change the implementation of the component list panel to Grid View.
https://user-images.githubusercontent.com/6566674/190933275-c544ea8d-529d-4b49-820f-d36874344572.mp4
# Important Notes
- We will implement the actual breadcrumbs integration in a separate PR: https://www.pivotaltracker.com/story/show/182675703
- The FRP changes in the component list panel code are temporary. The GridView-based implementation will later replace most of the boilerplate.
This PR reenables code signing and notarization on macOS.
[ci no changelog needed]
# Important Notes
* electron-builder has been bumped, mostly to avoid missing Python issue. A workaround for a regression with Windows installer is provided as a patch.
Repairing the constructor name following the types work. Some general tiding up as well.
- Remove `Standard.Database.Data.Column.Aggregate_Column_Builder`.
- Remove `Standard.Database.Data.Dialect.Dialect.Dialect_Data`.
- Remove unused imports and update some type definitions.
- Rename `Postgres.Postgres_Data` => `Postgres_Options.Postgres`.
- Rename `Redshift.Redshift_Data` => `Redshift_Options.Redshift`.
- Rename `SQLite.SQLite_Data` => `SQLite_Options.SQLite`.
- Rename `Credentials.Credentials_Data` => `Credentials.Username_And_Password`.
- Rename `Sql` to `SQL` across the board.
- Merge `Standard.Database.Data.Internal` into `Standard.Database.Internal`.
- Move dialects into `Internal` and merge the function in `Helpers` into `Base_Generator`.
[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/181445628).
This PR implements a Breadcrumbs panel for the new component browser.
The Breadcrumbs is a horizontal list of text labels separated by a special icon and has an optional ellipsis icon at the end.
It is implemented using the new GridView component.
Video:
Demo of adding new breadcrumbs, scrolling behavior, and selecting breadcrumbs with the mouse.
https://user-images.githubusercontent.com/6566674/189199432-77807cef-00dc-4abe-b95c-b17a536f59f6.mp4
Demo of selecting breadcrumbs with keyboard shortcuts:
https://user-images.githubusercontent.com/6566674/189199603-53e55335-73ba-4ed7-8291-4455144c06aa.mp4
# Important Notes
- This PR implements an old interaction of the design of the component browser. The new design of the breadcrumbs can not be easily integrated into the current look of the component browser, so we would need to update styles later. It should be a relatively simple task. *The implementation uses color from the new design though. (but not fonts and sizes)*
- I found a bug in the grid view implementation that causes panics at runtime in some conditions. The reason is triggering FRP endpoints while constructing new entries. This issue is fixed in the PR.
* added polyfill globals plugin to fix issue with missing types like Buffer that was affecting nightly releases;
* fixed exit code propagation for Windows build script wrapper;
* bumped the build script and refreshed the generated workflows.
Includes https://github.com/enso-org/ci-build/pull/8
Avoid long lines when using `dom().set_inner_text` - rather split the long lines to 1024 chunks and insert them as individual `<div>` elements.
# Important Notes
I was testing the behavior on following program:
```
from Standard.Base import all
import Standard.Base.Data.Statistics
import Standard.Visualization
main =
number1 = 200000
operator1 = 0.up_to number1 . to_vector . map .noise
operator2 = operator1.sort
operator3 = operator2.to_text
```
before my change the visualization of `operator3` was blank. With my change it gets filled with data.
This PR does not add anything visual for the user: it's a first part of making efficient Component Browser using fresh Grid View implementation.
The Layout is an intermediate model, which keeps the information how the groups are laid out in the Component browser, and allows querying for group entry by location and location of specific group entry (or header).
The layout is meant for the new design, where there are no section separators and Local Scope section is below Favorites.
# Important Notes
The new structure is not used in action, but tested with unit tests.
First of all this PR demonstrates how to implement _lazy visualization_:
- one needs to write/enhance Enso visualization libraries - this PR adds two optional parameters (`bounds` and `limit`) to `process_to_json_text` function.
- the `process_to_json_text` can be tested by standard Enso test harness which this PR also does
- then one has to modify JavaScript on the IDE side to construct `setPreprocessor` expression using the optional parameters
The idea of _scatter plot lazy visualization_ is to limit the amount of points the IDE requests. Initially the limit is set to `limit=1024`. The `Scatter_Plot.enso` then processes the data and selects/generates the `limit` subset. Right now it includes `min`, `max` in both `x`, `y` axis plus randomly chosen points up to the `limit`.
The D3 visualization widget is capable of _zooming in_. When that happens the JavaScript widget composes new expression with `bounds` set to the newly visible area. By calling `setPreprocessor` the engine recomputes the visualization data, filters out any data outside of the `bounds` and selects another `limit` points from the new data. The IDE visualization then updates itself to display these more detailed data. Users can zoom-in to see the smallest detail where the number of points gets bellow `limit` or they can select _Fit all_ to see all the data without any `bounds`.
# Important Notes
Randomly selecting `limit` samples from the dataset may be misleading. Probably implementing _k-means clustering_ (where `k=limit`) would generate more representative approximation.
This PR reenables code signing on Windows.
Each Windows package built on CI should be now signed.
Additionally, some refactorings were done around electron-builder config, so it is easier to use outside the build script and offers more configuration options.
So far, when opening the searcher with no node selected, an empty input without an associated AST node was created. This input was manipulated by the user and the final expression from the input was used to create a new node when the user confirmed their input. This PR changes this, so that when the searcher is opened without a selected node, a new AST node is created right away with some placeholder content, and this node is updated when the user confirms their input.
The only change visible to the user, is that if the text editor is opened during editing, a new node will appear in the source when the searcher is opened to create a new node. All other behaviour should stay the same.
[ci no changelog needed]
This PR fixes a [regression](https://www.pivotaltracker.com/story/show/182972359) found in the `interface` debug the scene. It was caused by multiple `Navigator`s that were present in the demo scene and conflict with each other.
Also, this PR includes a fix for the invalid logic of the new component browser. We disable `Navigator` when the mouse hovers the component browser. Still, due to a mistake in the code, the component browser was considered visible at all times and therefore blocked the navigator in certain mouse positions.
To reproduce this bug (before this PR):
1. Open a default project
2. Place the mouse somewhere in the middle of the screen (near one of the nodes)
3. Try panning or zooming the scene (you won't be able because of this bug)
Add functionality to revert a node that was changed during editing through the searcher.
Note that currently, nodes are not edited by the searcher, except upon confirmation, Thus this functionality results in a no-op at the moment.
# Important Notes
[ci no changelog needed]
This PR replaces webpack with esbuild, as our bundler.
The change leads to out-of-the-box ~5x improvement in bundling times, reducing the latency in watch-based workflows.
Along with this a new development server (with live reload capacity) has been introduced to support watch command.
[ci no changelog needed]
### Important Notes
* workflow for checking docs has been removed because it was using outdated prettier version and caused troubles; while the same check is performed in a better way by the GUI/Lint job.
* introduced little more typescript in the scripts in place of js, usually with minimal changes.
[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/181870555)
This PR changes the relative position of the edited node in such a way that it is left-aligned to the component browser window. This change reflects the most recent version of the [design doc](https://github.com/enso-org/design/blob/main/epics/component-browser/design.md#overview)
<img width="1157" alt="Screenshot 2022-08-08 at 19 15 47" src="https://user-images.githubusercontent.com/6566674/183454192-81960e0a-ab69-43a4-b7df-d13320a9d16d.png">
As an additional change, the FRP implementation of the `Camera2d` was extended with a new output (screen dimensions) and fixed. With the old implementation, there was a possibility of panic at runtime because of non-exclusive borrows of `RefCell`. The FRP event for camera position was emited inside the scope with a mutable `RefCell` borrow. Any attempt to borrow the camera one more time (e.g., by calling one of the getters, such as `zoom()`) caused panic at runtime.
[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/182713338).
This PR fixes the implementation of the entries highlight (selection box) in the component list panel of the component browser. The previous behavior was caused by the dumb implementation of keeping the selection inside the borders of the component list panel. Now the selection is correctly clipped and is hovering over entries at all times.
Screencasts:
https://user-images.githubusercontent.com/6566674/182196585-02ab5ec4-7d12-4d7a-8563-ac95aec3c9f4.mp4https://user-images.githubusercontent.com/6566674/182196768-9d28e83d-6c77-4ef6-abb0-98d50c4e74b7.mp4
# Important Notes
- This PR does not change the fact that after opening the component browser, the selection hovers over a random entry. See a [dedicated task](#182729573) for that.
- The selection box shape was moved from the `component_group` module because it depends heavily on list panel view implementation.
- The selection was removed from the `component_group` demo scene. We have a `component_list_panel_view` demo scene instead.
Show custom icons in Component Browser for entries that have a non-empty `Icon` section in their docs with the section's body containing a name of a predefined icon.
https://www.pivotaltracker.com/story/show/182584336
#### Visuals
A screenshot of a couple custom icons in the Component Browser:
<img width="346" alt="Screenshot 2022-07-27 at 15 55 33" src="https://user-images.githubusercontent.com/273837/181265249-d57f861f-8095-4933-9ef6-e62644e11da3.png">
# Important Notes
- The PR assigns icon names to four items in the standard library, but only three of them are shown in the Component Browser because of [a parsing bug in the Engine](https://www.pivotaltracker.com/story/show/182781673).
- Icon names are assigned only to four items in the standard library because only two currently predefined icons match entries in the currently defined Virtual Component Groups. Adjusting the definitions of icons and Virtual Component Groups is covered by [a different task](https://www.pivotaltracker.com/story/show/182584311).
- A bug in the documentation of the Enso protocol message `DocSection` is fixed. A `text` field in the `Tag` interface is renamed to `body` (this is the field name used in Engine).
This is a partial workaround for https://www.pivotaltracker.com/story/show/182713407
Because some entries' names are too long to be displayed inside the Component List Panel, the user may have no clue what the method is. Therefore, we add a title to each doc page.
There is also code introduced for displaying name of modules when submodule header is selected. However, it does not work, and it's hard to fix without significant changes in the Component List Panel API and implementation. Because those will be altered when implementing [Efficient Component List Panel](https://www.pivotaltracker.com/story/show/182561072), fixing is postponed until then.
# Important Notes
The code contains some significant refactoring. Removed long functions obtaining entries from the component::List - instead you can get group, and then entry from group. They return an option, which is turned to Result in the presenter (where we actually take advantage of having Result instead of Option).
Filter the Virtual Component Groups (a.k.a. "Favorites Data Science Tools") in the `component::List` (a.k.a. Hierarchical Action List) to only contain components with IDs listed in the Engine's response to a `search/completion` request.
This completes the "Virtual Component Groups filtered by input type" task (linked below) because the Engine's response to a `search/completion` request contains IDs of components filtered by input node type and `this` type.
https://www.pivotaltracker.com/story/show/182661634
#### Visuals
See below for a video showing the list of Favorites filtered by the type of the input node. Please note that the video also displays a few known issues that are present in the existing code and not introduced by this PR:
- "Opening the Component Browser 2nd or later time flashes its last contents from the previous time" - reported as [issue 15 in PR 3530](https://github.com/enso-org/enso/pull/3530#pullrequestreview-1035698205).
- The text of all the entries in the Component Browser does not show immediately, but the entries appear one by one instead (this is related to the performance of the current implementation of Component Browser and Text Area).
https://user-images.githubusercontent.com/273837/179000801-65ee7388-dde6-44b9-90fb-7453b4fb788c.mov
A screenshot showing the default, unfiltered list of Favorites when no input node is selected:
<img width="440" alt="Screenshot 2022-07-14 at 15 58 26" src="https://user-images.githubusercontent.com/273837/179000404-f14773a3-35a9-4e7a-877d-fcbb477b4769.png">
**Note**: This PR also contains content of previous Grid View PR. We decided to discard the previous, because this one did some refactoring of old one, and it's not a big addition.
Added a scrollable::GridView component, which just embeds the GridView in ScrollArea. Also, re-worked the idea of text layers.
https://user-images.githubusercontent.com/3919101/179020359-512ee127-c333-4f86-bff5-f1cb4154e03c.mp4
This PR contains all work for finishing integration of first Component List Panel in the IDE:
* It adds a stub for the whole Component Browser View. The documentation panel is re-used from the old searcher.
* It has the presenter implementation, integrating the view with Hierarchical Component List from the controller.
* It extends the View API, so the integration is possible, making use of Component Group Set wrapper.
* The selection integration was also merged into this PR, because it depended on the API extension mentioned above. However, we should avoid such practice in the future.
https://user-images.githubusercontent.com/3919101/177816427-8c4285b4-8941-4048-a400-52f4acf77a9f.mp4
# Important Notes
There are some known issues, to-be-fixed in the future.
* The performance is bad. It should be improved with new text::Area, and the decent one shall come with [GridView inside component browser](https://www.pivotaltracker.com/story/show/182561072)
* There is no keyboard navigation. It should also be delivered with [GridView](https://www.pivotaltracker.com/story/show/182561072).
* The Favorites section is not [filtered out by node source type](https://www.pivotaltracker.com/story/show/182661634).
Implements https://www.pivotaltracker.com/story/show/182633483
Adds functionality to the Searcher Controller to save the expression of a node to its metadata, while it is edited. In later PRs this will be used to restore the expression, if an edit is aborted. This will be needed, as the expression will be changed within the source while editing to allow the visualization preview to be shown. As of this PR, the information is only stored, not used yet.
Demo Video
------------------
Note how the metadata of the node includes a `edit_status` field, when the project is saved during editing, and how it is cleared when saving without an edit happening.
https://user-images.githubusercontent.com/1428930/178740111-d0bbaa43-00b0-42e3-9fbb-d9249f07ae35.mp4
# Important Notes
[ci no changelog needed]
Visualization within the UI is no longer working since the removal of the `here` keyword.
This PR fixes the JavaScript calls.
# Important Notes
There are various lines of rust code which still have `here.` within them and these will need to be fixed at some point.
