This PR provides a visual indication of whether the project's current state differs from the most recent snapshot saved in the VCS. The project name displayed in the IDE changes to a darker text to indicate that the VCS snapshot is outdated, and back to a lighter text when the current project state corresponds to the last saved VCS snapshot.
https://user-images.githubusercontent.com/117099775/208088438-20dfc2aa-2a7d-47bf-bc12-3d3dff7a4974.mp4
The outdated project snapshot indicator is set when:
* A node is moved.
* A node is added or removed.
* The text editor is used to edit the text.
* The project is auto-saved, and the auto-saved project state does not correspond to the last saved snapshot in the VCS.
The outdated project snapshot indicator is cleared when:
* A new project snapshot is successfully saved using `ctrl+s`.
* The project is auto-saved, and the auto-saved project state is confirmed to correspond to the last saved snapshot in the VCS. This occurs, for example, when a project change is undone and the project is reverted to the last saved snapshot state.
The auto-save events do not occur immediately after a project change but have a short delay, thus the VCS status update is affected by the same delay when triggered by an auto-save event.
This removes the special handling of polyglot exceptions and allows matching on Java exceptions in the same way as for any other types.
`Polyglot_Error`, `Panic.catch_java` and `Panic.catch_primitive` are gone
The change mostly deals with the backslash of removing `Polyglot_Error` and two `Panic` methods.
`Panic.catch` was implemented as a builtin instead of delegating to `Panic.catch_primitive` builtin that is now gone.
This fixes https://www.pivotaltracker.com/story/show/182844611
This is an enhancement of the `Slider` component implemented in #3852. It adds the following features:
* Tooltips and precision change hints
* Selectable slider limit behaviors
* Textual slider value editing
* Vertical slider layout
#### Tooltips
An information tooltip can now be added to a slider, it is shown when the mouse hovers over the component. Additionally, a pop-up indicating the slider's precision appears when the slider's precision has been adjusted.
https://user-images.githubusercontent.com/117099775/206148098-3b4dc059-18aa-4200-9ee0-5d4382363810.mp4
#### Slider limits
The previous slider implementation clamped the adjusted value to the slider's minimum/maximum limits. Now the following behaviors are available:
* Hard limits: Clamp the value to a range within the slider's limits.
* Soft limits: The value can extend beyond the slider's limits. When this occurs, an overflow indicator will be displayed on the side of the limit that is exceeded.
* Adaptive limits: The value can extend beyond the slider's limits. When this occurs, the exceeded limit will temporarily be adjusted to double the slider's range. This will be performed iteratively until the value falls within the extended limits. When a limit is extended and the value is adjusted to fit a smaller range, the extended limit will be iteratively halved until only the necessary range is covered. The slider's extended limits will never shrink to a range smaller than the original range.
These behaviors can be set to the lower and upper limits of a slider independently.
https://user-images.githubusercontent.com/117099775/206148139-6149c91d-ef49-4e2d-97f6-71084f52591c.mp4
#### Textual editing
The slider's value can now be entered through a text input field. Double-click to edit the slider's current value. To confirm the edit press `enter`, or press `escape` to cancel the edit. If an invalid value is entered on confirmation the slider will revert to its value before the edit. The slider's precision will be adjusted based on the number of decimal places of the value entered.
https://user-images.githubusercontent.com/117099775/206148170-d3fa4c82-6e73-4b1c-9be9-cb99979f7b70.mp4
#### Vertical layout
The slider component now supports a vertical layout. In this case value adjustment is performed by a vertical mouse movement, and a horizontal movement adjusts the slider's precision. The slider's track now fills the component in a vertical direction, and the slider's label is displayed near the top end of the component.
https://user-images.githubusercontent.com/117099775/206148211-0f176aaf-bc1b-45e2-afd7-0d28391aafcb.mp4
#### Scroll bar mode
The slider component supports two indicator modes:
* `Track`: The component is filled with a colored bar from the lower limit (empty) to the upper limit (full) dependent on the slider's value.
* `Thumb`: The component contains a rounded indicator that moves along the slider from one end to the other, indicating the slider's value proportionally to the slider's limits. The width of the indicator is configurable.
In addition, the value text, text entry, and precision adjustment can be turned off to provide a scroll bar appearance when used with the `Thumb` indicator.
https://user-images.githubusercontent.com/117099775/206148261-ae291073-85e9-4082-9f91-39b65fecdc0f.mp4
#### Example scene shortcuts
The example scene contains two shortcuts in order to evaluate the dynamic addition and removal of the slider components:
* `CTRL+D` drops all the slider components that are added to the scene.
* `CTRL+A` adds a new set of example slider components to the scene.
Fixes regression https://www.pivotaltracker.com/n/projects/2539304/stories/183895961
# Important Notes
The root cause of the issue was a missing deref before `flavor()` call. The autoderef doesn't work there, because the `ShapeSystemFlavorProvider` trait is implemented for all types, including `Ref`. We should reconsider if blanket default impl is a good idea, as this is a very scary footgun.
Apart from that, the cleanup of layer elements was not handling systems with same ID but different flavors correctly. That could cause text to disappear when given layer had text of multiple fonts, and all shapes of one of them got removed. Now the element is removed from layer only when all systems sharing given system ID have no more instances to render.
* Sequence literal (Vector) should preserve warnings
When Vector was created via a sequence literal, we simply dropped any
associated any warnings associated with it.
This change propagates Warnings during the creation of the Vector.
Ideally, it would be sufficient to propagate warnings from the
individual elements to the underlying storage but doesn't go well with
`Vector.fromArray`.
* update changelog
* Array-like structures preserver warnings
Added a WarningsLibrary that exposes `hasWarnings` and `getWarnings`
messages. That way we can have a single storage that defines how to
extract warnings from an Array and the others just delegate to it.
This simplifies logic added to sequence literals to handle warnings.
* Ensure polyglot method calls are warning-free
Since warnings are no longer automatically extracted from Array-like
structures, we delay the operation until an actual polyglot method call
is performed.
Discovered a bug in `Warning.detach_selected_warnings` which was missing
any usage or tests.
* nits
* Support multi-dimensional Vectors with warnings
* Propagate warnings from case branches
* nit
* Propagate all vector warnings when reading element
Previously, accessing an element of an Array-like structure would only
return warnings of that element or of the structure itself.
Now, accessing an element also returns warnings from all its elements as
well.
This PR is a draft PR while I learn EnsoGL. The eventual goal is to implement the projects list portion of the cloud dashboard in this PR. This PR will implement part of https://www.pivotaltracker.com/n/projects/2539513/stories/183557950
### Important Notes
This PR is still really rough and contains a lot of hacks & hard-coded values. The FRP usage is also likely to be suboptimal and need fixing.
Fix issues noted here: https://github.com/enso-org/enso/pull/3678#issuecomment-1273623924
- Time complexity of an operation during line-redrawing scaled quadratically with number of lines in a change; now linear.
- Time complexity of adding `n` selections to a group was `O(n^2)`. Now it is `O(n log n)`, even if the selections are added one by one.
Also fix a subtle bug I found in `Group::newest_mut`: It returned a mutable reference that allowed breaking the *sorted* invariant of the selection group. The new implementation moves the element to invalidated space before returning a reference (internally to `LazyInvariantVec`), so that if it is mutated it will be moved to its correct location.
### Important Notes
New APIs:
- `NonEmptyVec::extend_at` supports inserting a sequence of elements at a location, with asymptotically-better performance than a series of `insert`s. (This is a subset of the functionality of `Vec::splice`, a function which we can't safely offer for `NonEmptyVec`).
- `LazyInvariantVec` supports lazily-restoring an invariant on a vector. For an invariant such as *sorted* (or in this case, *sorted and merged*), this allows asymptotically-better performance than maintaining the invariant with each mutation.
This PR fixes the `code_to_insert` method of entry to insert valid code according to the newest language version. Also created a separate method for getting imports required by given entry.
Now, method entries do not add imports (except when they are extensions), and are insterted with place for this type `_.method`. Static methods and constructors are inserted with the type name, and proper import for type is added.
There are some additional work done:
* The ReferentName and NormalizedName were removed, as we are now case-sensitive.
* All QualifiedName structures were replaced with new one in `name` module, as there is no longer functional difference between type qualified name and module qualified name.
* The QualifiedName structure removes "Main" module segment where it is not necessary, thus simplifying our code base and avoiding potential issues.
* Added macro `mock_suggestion_database` which should make creating consistent mocks of SuggestionDatabase much simpler.
* Fixed bug where the visualization preview show no value for some time.
https://user-images.githubusercontent.com/3919101/202750275-0d378d5f-1482-4637-bdcd-c428a9eac0d4.mp4
# Important Notes
The tests in controller/searcher.rs file are not of the best quality, but those will be overhauled anyway when implementing my next task.
This `Slider` component allows adjusting a numeric value with the mouse. The value is increased or decreased by clicking on the component and dragging it to the left or right.
The `Slider` has a configurable default value. `Ctrl`+clicking on the component resets its value to that default. When the value is moved away from the default, the value is printed in **bold**.
The `Slider` precision is increased or decreased by clicking the component and dragging upward or downward. This precision influences how quickly the value changes when the mouse moves horizontally, the steps in which the value is incremented or decremented, and the number of digits used to display the value. There is a margin around the component within which the precision is not changed. Beyond this margin, the precision is increased or decreased in powers of 10 (e.g. `0.1` -> `0.01` -> `0.001` when moving the mouse downwards, or `0.1` -> `1.0` -> `10.0` when moving the mouse upwards). The margin and distance between consecutive steps along the vertical axis are configurable.
The value of the `Slider` is limited to a configurable range, and cannot be adjusted beyond that range. A colored bar fills the component to indicate the current value within the range.
#### Video demonstration
https://user-images.githubusercontent.com/117099775/202244982-2f6f419d-7281-41f6-8607-7e492ad25b46.mp4
#### Future additions
This is the first iteration of the `Slider` component. Additional features are planned for the future:
* Textual editing of the value.
* Improved visual feedback on precision changes.
* Additional out-of-range behaviors.
It appears that we were always adding builtin methods to the scope of the module and the builtin type that shared the same name.
This resulted in some methods being accidentally available even though they shouldn't.
This change treats differently builtins of types and modules and introduces auto-registration feature for builtins.
By default all builtin methods are registered with a type, unless explicitly defined in the annotation property.
Builtin methods that are auto-registered do not have to be explicitly defined and are registered with the underlying type.
Registration correctly infers the right type, depending whether we deal with static or instance methods.
Builtin methods that are not auto-registered have to be explicitly defined **always**. Modules' builtin methods are the prime example.
# Important Notes
Builtins now carry information whether they are static or not (inferred from the lack of `self` parameter).
They also carry a `autoRegister` property to determine if a builtin method should be automatically registered with the type.
Libraries: Revert changes that were necessitated by a new rule we have decided not to introduce.
Parser:
- Support mixed constructors/bindings in types.
- Disallow zero-length hex sequences in character escapes: `\x`, `\u`, `\u{}`, `\U`, `\U{}` are no longer legal synonyms for `\0` (matches old parser behavior).
This change adds support for Version Controlled projects in language server.
Version Control supports operations:
- `init` - initialize VCS for a project
- `save` - commit all changes to the project in VCS
- `restore` - ability to restore project to some past `save`
- `status` - show the status of the project from VCS' perspective
- `list` - show a list of requested saves
# Important Notes
Behind the scenes, Enso's VCS uses git (or rather [jGit](https://www.eclipse.org/jgit/)) but nothing stops us from using a different implementation as long as it conforms to the establish API.
Computing length of a text takes time. Let's cache it after first computation.
# Important Notes
Wrote `StringBenchmarks` that sums lengths of (the same) `Text` present many time in a `Vector`. Initially it took `383.673 ms` per operation. Then it took `0.031 ms/op`. Looks like the `length` calls are returning instantly as they get cached.
Ensure all tokens from the input are represented in trees resulting from invalid inputs--tests now cover every reachable code line that creates an `Invalid` node. (Also implemented stricter validation, mainly of `import`/`export` statements.)
See: https://www.pivotaltracker.com/story/show/183405907
Another set of improvements extracted from #3611. This time it includes a fix to the Rust part of the parser.
# Important Notes
After digging into metadata parsing I realized the positions used to query the BTree data structure are wrong. This PR tries to address that by re-arranging the order of serialized fields and passing `startCode` and `endCode` locations in.
Originally I though I need changes on the Rust side to support `in` operator. Turned out I can do that just with changes on the Java side.
Qualified names in imports were missing UUIDs. Fixed now.
Split `HasOutputTypeLabel::output_type_label` method implementation non-generic part into a separate function. This significantly reduces compile time without risking any performance regressions. That function is currently only used for debug network visualization using graphviz, but still contributed a significant compilation time.
I've made a single attempt to profile the compiler itself, and it turned out that the compiler spent a significant amount of time trying to resolve `Pattern` implementation for closures in that method. Each of those also had to separately go through codegen and optimization. That happened for each node type in the codebase, per crate. Moving that into separate non-inline function removed all those unnecessary duplicates from. I also took this opportunity to rewrite that small piece of parsing to make it a bit cleaner.
The method of measurement is explained here: https://blog.rust-lang.org/inside-rust/2020/02/25/intro-rustc-self-profile.html
In this specific case, I've used `self-profile` to generate a profile for all crates, then used `crox` and [perfetto](https://ui.perfetto.dev/) to analyze the output.
This also shows a pattern to be aware of - using closures in generic context forces the compiler to make a separate closure type per each instantiation, even if that closure doesn't close on anything and could be a static function. This in effect forces even more instantiations or unnecessary type resolutions for all code paths that touch that closure. Using static functions or separating the non-generic part away in those cases would likely continue to help with compile times and file size.
## Comparison
The measurement was done on same machine under same environment, cleaning the build artifacts inbetween runs.
| | before | after |
|-|-|-|
|total build time|5m 5.5s|3m 59.0s|
| `ide-view-graph-editor` crate build time| 85.68s | 49.73s |
| `ide-view-component-list-panel-grid` crate build time | 49.88s | 32.07s |
| `ide-view` crate build time | 29.05s | 17.5s |
| `enso_gui.wasm` file size before wasm-opt | 83.6 MB | 80.9 MB |
| `enso_gui.wasm` file size after wasm-opt | 67.3 MB | 65.3 MB |
Make sure `libenso_parser.so`, `.dll` or `.dylib` are packaged and included when `sbt buildEngineDistribution`.
# Important Notes
There was [a discussion](https://discord.com/channels/401396655599124480/1036562819644141598) about proper location of the library. It was concluded that _"there's no functional difference between a dylib and a jar."_ and as such the library is placed in `component` folder.
Currently the old parser is still used for parsing. This PR just integrates the build system changes and makes us ready for smooth flipping of the parser in the future as part of #3611.
Wrap big and commonly copied `Application` struct into `Rc` to avoid large structure sizes for all widgets.
The `Application` struct by itself takes 704 bytes, measured by `size_of::<Application>()`. This structure is very often directly copied into components and widgets. Most notably, the generic `Widget` struct contains it. There are also cases, where structs (especially various `Model`s) contain multiple other child widgets directly, and end up indirectly copying the application multiple times.
All of `Application` clones are logical references (via `CloneRef`), so wrapping it into extra `Rc` doesn't change semantics in any way, but makes all structs that clone it way smaller. This reduces the amount of `memcpy`s and overall volume of allocated memory.
Measurement of a few example structs:
Before change:
```
size_of Application: 704 B
size_of Scrollbar: 712 B
size_of Scrollbar Model: 1576 B
```
After change:
```
size_of Application: 4 B
size_of ApplicationData: 704 B
size_of Scrollbar: 12 B
size_of Scrollbar Model: 176 B
```
Ideally we would not need to clone application reference into each component, but that's out of scope of this PR since it requires a lot more effort.
Fix bugs in `TreeToIr` (rewrite) and parser. Implement more undocumented features in parser. Emulate some old parser bugs and quirks for compatibility.
Changes in libs:
- Fix some bugs.
- Clean up some odd syntaxes that the old parser translates idiosyncratically.
- Constructors are now required to precede methods.
# Important Notes
Out of 221 files:
- 215 match the old parser
- 6 contain complex types the old parser is known not to handle correctly
So, compared to the old parser, the new parser parses 103% of files correctly.
1. Changes how we do monadic state – rather than a haskelly solution, we now have an implicit env with mutable data inside. It's better for the JVM. It also opens the possibility to have state ratained on exceptions (previously not possible) – both can now be implemented.
2. Introduces permission check system for IO actions.
Fixes https://www.pivotaltracker.com/story/show/182926584
[Task link](https://www.pivotaltracker.com/story/show/183426449)
This PR fixes an IDE freeze introduced by https://github.com/enso-org/enso/pull/3732 and reimplements reverting edited nodes to their previous state.
The cause of the IDE freeze is quite interesting. A detailed investigation is available [here](https://gist.github.com/vitvakatu/785e34881368b8cfda61715d7543cbd0).
The graph editor needs to update the Presenter state only if the user is editing the node. Before this PR, the graph editor notified the Presenter with a visual representation of the node content instead of code expression. It caused inconsistency between the states of the controller and Presenter and caused severe performance issues.
https://user-images.githubusercontent.com/6566674/195831224-6d6e8258-e347-48b4-890a-d89c7300bc39.mp4
# Important Notes
- ~~There is a more complex alternative solution – it requires refactoring of the `component::node::input::area` module. The Presenter can be notified with `expression.code` changes, not `expression.viz_code`. I found a simpler solution (`.gate(&edit_mode)`), which has the same effect but does not require additional refactoring.~~ Said solution is implemented in a separate commit
We've had an old attempt at integrating a Rust parser with our Scala/Java projects. It seems to have been abandoned and is not used anywhere - it is also superseded by the new integration of the Rust parser. I think it was used as an experiment to see how to approach such an integration.
Since it is not used anymore - it make sense to remove it, because it only adds some (slight, but non-zero) maintenance effort. We can always bring it back from git history if necessary.
When hovering the mouse pointer over the Marketplace button on the left bar of the Component Browser, show a caption informing that the Marketplace will be available soon.
https://www.pivotaltracker.com/story/show/182613789
#### Visuals
The video below demonstrates the caption shown when hovering the Marketplace button on the left bar of the Component Browser. It shows the caption disappearing after a hardcoded time, or when the mouse pointer is moved away from the button.
https://user-images.githubusercontent.com/273837/196195809-45a712e1-ad86-47d8-99ff-1475a0b74c6e.mov
# Important Notes
- The "Label" visual component was fixed. Previously, the width calculation of the background was not synchronized correctly with the text width. As a result, a zero-width background was displayed when a Label was shown for the first time.
There is one place in code, where we can potentially panic on double borrow, because the drop routine is done while having data borrowed.
# Important Notes
The issue was easily reproducible on @Frizi machine.
Another part of #3611 ready for integration into `develop` branch.
# Important Notes
Test `org.enso.compiler.EnsoCompilerTest.testTestGroup` is ignored as it has problems with source offsets - identifiers don't have the appropriate names due to `Tree.codeRepr()` being _off_.
- Special precedence rules for case-of so that `:` operator works without parens or nospace-grouping.
- Support an old-lambda syntax: `x->x-> x`. According to the usual rules, the first nospace group would be parsed as an operator section. The expression now parses as a lambda that contains a lambda.
- Match old parser treatment of # in doc comments.
- Tweak precedence so (a : B = c) works.
- Documented constructors.
- Reimplement the `Duration` type to a built-in type.
- `Duration` is an interop type.
- Allow Enso method dispatch on `Duration` interop coming from different languages.
# Important Notes
- The older `Duration` type should now be split into new `Duration` builtin type and a `Period` type.
- This PR does not implement `Period` type, so all the `Period`-related functionality is currently not working, e.g., `Date - Period`.
- This PR removes `Integer.milliseconds`, `Integer.seconds`, ..., `Integer.years` extension methods.
This PR introduced an overhauled Component List Panel implementation, making use of the efficient EnsoGL grid view component. Also, it delivers a couple of new features:
* A part of the new design: there are no more section headers in grid, instead groups are "glued" together. The local scope section is under "popular" (old "favorites").
* The keyboard management inside grid works.
* there is a mouse hover highlight
* selecting the lowest entry in section when jumping with navigation bar.
* accepting input as-is with cmd/ctrl + Enter.
https://user-images.githubusercontent.com/3919101/194561890-fffb9b41-2f0d-4357-8d9a-5038a6bcb023.mp4
### Important Notes
**What is not implemented:**
* [Focus management between panels.](https://www.pivotaltracker.com/story/show/180872763) The grid is always focused. To accept the current input, use ctrl+Enter shortcut.
* [Proper handling of selection when having empty space on the right and pressing right arrow.](https://www.pivotaltracker.com/story/show/183487880)
* When entering a module, its name is not added to the input as described in the design doc. Will be a part of [this User Story](https://www.pivotaltracker.com/story/show/181058321).
**Known issues**
* [the selection, especially in the local scope section, has sometimes an undesirable offset](https://www.pivotaltracker.com/story/show/183487730). The cause is known, but not so easy to fix.
* The inserted nodes are often producing errors. The Browser's inherits the outdated understanding of the language from old Node Searcher, and it does not include new form of imports, static methods etc. Those all will be fixed as a part of [this User Story](https://www.pivotaltracker.com/story/show/181058321).
* The performance is improved, but still not ideal, due to problems in [text areas](https://www.pivotaltracker.com/story/show/183406745).
* To scroll the documentation panel, you must first click on it.
- Implement macro-contexts-lite (`from` is now only a keyword at the beginning of a line)
- Support special nospace-group handling for old lambdas (so expressions like this work: `x-> y-> x + y`)
- Fix a text-escape incompatibility
# Important Notes
- There is now an `OperatorFunction`, which is like a `Function` but has an operator for a name, and likewise an `OperatorTypeSignature`.
[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/182675703)
This PR implements the actual integration of the breadcrumbs panel with the component list panel. A special breadcrumbs controller (`controller::searcher::breadcrumbs`) is tracking the currently opened module with a list of its parents. The searcher presenter uses the API of the controller to sync the displayed list of breadcrumbs with the controller state.
https://user-images.githubusercontent.com/6566674/193064122-7d3fc4d6-9148-4ded-a73e-767ac9ac83f8.mp4
# Important Notes
- There is an `All` breadcrumb displayed at all times at the beginning of the list. It will be replaced with a section name as part of [Section Title on Component Browser's Breadcrumbs Panel](https://www.pivotaltracker.com/story/show/182610561) task.
- I changed the implementation of `project::main_module_id`, `project::QualifiedName::main_module`, and `API::main_module` so that they are logically connected which each other.
- I adjusted the Breadcrumbs View to avoid "appearance" animation glitches when opening new modules. `set_entries` was replaced with the `set_entries_from` endpoint.
When running the profiling run-graph and flamegraph demo scenes, if a profile file is not found in the directory served over http, fall back to generating demo data.
This PR disables the wasm-opt optimization in the crates that can be used as WASM entry points. Unfortunately, wasm-pack does not allow for disabling wasm-opt through a command line flag, so we have to disable it by setting an appropriate flag in each Cargo.toml.
Use an `ArraySlice` to slice `Vector`.
Avoids memory copying for the slice function.
# Important Notes
| Test | Ref | New |
| --- | --- | --- |
| New Vector | 71.9 | 71.0 |
| Append Single | 26.0 | 27.7 |
| Append Large | 15.1 | 14.9 |
| Sum | 156.4 | 165.8 |
| Drop First 20 and Sum | 171.2 | 165.3 |
| Drop Last 20 and Sum | 170.7 | 163.0 |
| Filter | 76.9 | 76.9 |
| Filter With Index | 166.3 | 168.3 |
| Partition | 278.5 | 273.8 |
| Partition With Index | 392.0 | 393.7 |
| Each | 101.9 | 102.7 |
- Note: the performance of New and Append has got slower from previous tests.
This PR adds a possibility to generate native-image for engine-runner.
Note that due to on-demand loading of stdlib, programs that make use of it are currently not yet supported
(that will be resolved at a later point).
The purpose of this PR is only to make sure that we can generate a bare minimum runner because due to lack TruffleBoundaries or misconfiguration in reflection config, this can get broken very easily.
To generate a native image simply execute:
```
sbt> engine-runner-native/buildNativeImage
... (wait a few minutes)
```
The executable is called `runner` and can be tested via a simple test that is in the resources. To illustrate the benefits
see the timings difference between the non-native and native one:
```
>time built-distribution/enso-engine-0.0.0-dev-linux-amd64/enso-0.0.0-dev/bin/enso --no-ir-caches --in-project test/Tests/ --run engine/runner-native/src/test/resources/Factorial.enso 6
720
real 0m4.503s
user 0m9.248s
sys 0m1.494s
> time ./runner --run engine/runner-native/src/test/resources/Factorial.enso 6
720
real 0m0.176s
user 0m0.042s
sys 0m0.038s
```
# Important Notes
Notice that due to a [bug in GraalVM](https://github.com/oracle/graal/issues/4200), which is already fixed in 22.x, and us still being on 21.x for the time being, I had to add a workaround to our sbt build to build a different fat jar for native image. To workaround it I had to exclude sqlite jar. Hence native image task is on `engine-runner-native` and not on `engine-runner`.
Will need to add the above command to CI.
When a GridView is navigated using the keyboard, scroll it to display the newly selected entry.
https://www.pivotaltracker.com/story/show/182593635
#### Visuals
See below for a video demonstrating automatic scrolling of the GridView when arrow keys are pressed on the keyboard. The first video below shows the default scrolling behavior in a GridView without headers.
Note:
- When the Grid View is scrolled, the mouse hover highlight moves away from the mouse position. This is not a new regression, the behavior is the same in the `develop` branch (e.g. when scrolling using the mouse).
https://user-images.githubusercontent.com/273837/190183984-91f7808c-3606-43f8-bcda-ac4d5f84e00f.mov
The video below shows the behavior in a GridView with headers when the GridView is first scrolled to its top-left corner. The following guidance from the Design Doc is enabled and showcased:
> Users can change the selected component by pressing the arrow keys. The Focus does not move up if it does not have to (in most cases, the focus is located in the second row from the bottom). Instead, the component list scrolls down if there are enough entries.
https://user-images.githubusercontent.com/273837/189151546-e50aaf22-6f4d-41cb-809f-60038305745f.mov
The next video shows the behavior in the same GridView as in the previous example when the GridView is first scrolled away from any of its boundary entries. Notably, scrolling happens only when the selection is moved using the keyboard arrow keys, not when changing the selection using the mouse. This behavior is based on a discussion with @wdanilo on Discord.
https://user-images.githubusercontent.com/273837/189151974-d992be93-f61f-4e9f-9f4c-dfe260bbec5b.mov
This PR contains an entry definition for Grid View to be used inside Component List Panel View. The Example grid view with the entry definition may be seen on new_component_list_panel_view debug scene.
https://user-images.githubusercontent.com/3919101/190663278-23c35ab0-f426-4001-8128-df7147aafb9e.mp4
# Important Notes
* The styling is not detailed yet due to time constraints (I want to move to integration this grid view to Component Panel List ASAP) and the fact that I could not get new mplus1 font working with text Area.
* Implementing this required adding a "contour offset" feature to the Grid View.
[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/181445628).
This PR implements a Breadcrumbs panel for the new component browser.
The Breadcrumbs is a horizontal list of text labels separated by a special icon and has an optional ellipsis icon at the end.
It is implemented using the new GridView component.
Video:
Demo of adding new breadcrumbs, scrolling behavior, and selecting breadcrumbs with the mouse.
https://user-images.githubusercontent.com/6566674/189199432-77807cef-00dc-4abe-b95c-b17a536f59f6.mp4
Demo of selecting breadcrumbs with keyboard shortcuts:
https://user-images.githubusercontent.com/6566674/189199603-53e55335-73ba-4ed7-8291-4455144c06aa.mp4
# Important Notes
- This PR implements an old interaction of the design of the component browser. The new design of the breadcrumbs can not be easily integrated into the current look of the component browser, so we would need to update styles later. It should be a relatively simple task. *The implementation uses color from the new design though. (but not fonts and sizes)*
- I found a bug in the grid view implementation that causes panics at runtime in some conditions. The reason is triggering FRP endpoints while constructing new entries. This issue is fixed in the PR.
Add support for moving the selection in a Grid View using the keyboard.
https://www.pivotaltracker.com/story/show/182585789
#### Visuals
See below for videos showcasing GridView selection keyboard navigation in the `grid_view` debug scene. In the videos, messages in the Developer Console can be observed. When a keypress would result in the selection being moved out of the GridView, the selection is not moved and a message is emitted in the Developer Console instead, showcasing an FRP output signal emitted on such event. Please note that the videos are recorded with the tracing level changed to `DEBUG`. In a default build, the tracing level is set to `WARN`, and the messages visible in the videos are not displayed in the Developer Console.
https://user-images.githubusercontent.com/273837/188483972-89d79f7b-1303-457b-869f-282e0809a755.movhttps://user-images.githubusercontent.com/273837/188484294-e9b6461c-a84f-4817-9447-d792f2ebdbb5.mov
The following video shows moving the selection between "regular" entries and header entries. It also shows a current usability limitation of the selection keyboard navigation feature, such that the Grid is not scrolled when the selection leaves the visible part of the Grid, and the selection may thus disappear from view.
https://user-images.githubusercontent.com/273837/188485238-29a82b27-de2f-4cf8-a2e7-ff8c3f41478d.mov
# Important Notes
- Keyboard navigation only works when a GridView has focus.
- Selection keyboard navigation only works if the selection was already set to some entry beforehand.
- If keyboard navigation would move selection outside of the grid, the selection movement is canceled and an FRP event is emitted.
`Vector` type is now a builtin type. This requires a bunch of additional builtin methods for its creation:
- Use `Vector.from_array` to convert any array-like structure into a `Vector` [by copy](f628b28f5f)
- Use (already existing) `Vector.from_polyglot_array` to convert any array-like structure into a `Vector` **without** copying
- Use (already existing) `Vector.fill 1 item` to create a singleton `Vector`
Additional, for pattern matching purposes, we had to implement a `VectorBranchNode`. Use following to match on `x` being an instance of `Vector` type:
```
import Standard.Base.Data.Vector
size = case x of
Vector.Vector -> x.length
_ -> 0
```
Finally, `VectorLiterals` pass that transforms `[1,2,3]` to (roughly)
```
a1 = 1
a2 = 2
a3 = 3
Vector (Array (a1,a2, a3))
```
had to be modified to generate
```
a1 = 1
a2 = 2
a3 = 3
Vector.from_array (Array (a1, a2, a3))
```
instead to accomodate to the API changes. As of 025acaa676 all the known CI checks passes. Let's start the review.
# Important Notes
Matching in `case` statement is currently done via `Vector_Data`. Use:
```
case x of
Vector.Vector_Data -> True
```
until a better alternative is found.
Parse text literals. See: https://www.pivotaltracker.com/story/show/182496940
# Important Notes
- The left-trimming algorithm (https://github.com/enso-org/design/blob/wip/wd/enso-spec/epics/enso-spec-1.0/04.%20Expressions.md#inline-and-block-text-literals) requires two passes over the sequence of text segments. This implementation performs one pass while parsing (identifying the correct amount of trim). The other pass (applying the trim) can be done when building the value of the quoted string: Trim the amount of whitespace identified by the `trim` field off of the whitespace of each `TextSection` (the value will not exceed the amount of whitespace found in the tokens' offsets, except for tokens with 0 offset, in which case no trimming is necessary/possible).
Implements:
- UUIDs: https://www.pivotaltracker.com/story/show/182931137
- Comments: https://www.pivotaltracker.com/story/show/182981779
- Type annotations and signatures: https://www.pivotaltracker.com/story/show/182497454
- Fix getter names (https://github.com/enso-org/enso/pull/3627#discussion_r940887460).
# Important Notes
- I can't fully test UUIDs; I have tested that the data obtained in Rust matches my understanding of how the format is supposed to work. What remains to be tested is that the data in Java matches the way the old parser handles the format. So @JaroslavTulach, let me know if you see any cases where I'm not returning the same values.
- This implementation of type annotations and signatures accepts any expression in type context. It would probably be nice to narrow this down at some point, but for now I have no design info on what specifically should be allowed in type expressions; this implementation should be at least an incremental improvement.
This is a step towards the new language spec. The `type` keyword now means something. So we now have
```
type Maybe a
Some (from_some : a)
None
```
as a thing one may write. Also `Some` and `None` are not standalone types now – only `Maybe` is.
This halfway to static methods – we still allow for things like `Number + Number` for backwards compatibility. It will disappear in the next PR.
The concept of a type is now used for method dispatch – with great impact on interpreter code density.
Some APIs in the STDLIB may require re-thinking. I take this is going to be up to the libraries team – some choices are not as good with a semantically different language. I've strived to update stdlib with minimal changes – to make sure it still works as it did.
It is worth mentioning the conflicting constructor name convention I've used: if `Foo` only has one constructor, previously named `Foo`, we now have:
```
type Foo
Foo_Data f1 f2 f3
```
This is now necessary, because we still don't have proper statics. When they arrive, this can be changed (quite easily, with SED) to use them, and figure out the actual convention then.
I have also reworked large parts of the builtins system, because it did not work at all with the new concepts.
It also exposes the type variants in SuggestionBuilder, that was the original tiny PR this was based on.
PS I'm so sorry for the size of this. No idea how this could have been smaller. It's a breaking language change after all.
- Added `Zone`, `Date_Time` and `Time_Of_Day` to `Standard.Base`.
- Renamed `Zone` to `Time_Zone`.
- Added `century`.
- Added `is_leap_year`.
- Added `length_of_year`.
- Added `length_of_month`.
- Added `quarter`.
- Added `day_of_year`.
- Added `Day_Of_Week` type and `day_of_week` function.
- Updated `week_of_year` to support ISO.
# Important Notes
- Had to pass locale to formatter for date/time tests to work on my PC.
- Changed default of `week_of_year` to use ISO.
* Builtin Date_Time, Time_Of_Day, Zone
Improved polyglot support for Date_Time (formerly Time), Time_Of_Day and
Zone. This follows the pattern introduced for Enso Date.
Minor caveat - in tests for Date, had to bend a lot for JS Date to pass.
This is because JS Date is not really only a Date, but also a Time and
Timezone, previously we just didn't consider the latter.
Also, JS Date does not deal well with setting timezones so the trick I
used is to first call foreign function returning a polyglot JS Date,
which is converted to ZonedDateTime and only then set the correct
timezone. That way none of the existing tests had to be changes or
special cased.
Additionally, JS deals with milliseconds rather than nanoseconds so
there is loss in precision, as noted in Time_Spec.
* Add tests for Java's LocalTime
* changelog
* Make date formatters in table happy
* PR review, add more tests for zone
* More tests and fixed a bug in column reader
Column reader didn't take into account timezone but that was a mistake
since then it wouldn't map to Enso's Date_Time.
Added tests that check it now.
* remove redundant conversion
* Update distribution/lib/Standard/Base/0.0.0-dev/src/Data/Time.enso
Co-authored-by: Radosław Waśko <radoslaw.wasko@enso.org>
* First round of addressing PR review
* don't leak java exceptions in Zone
* Move Date_Time to top-level module
* PR review
Co-authored-by: Radosław Waśko <radoslaw.wasko@enso.org>
Co-authored-by: Jaroslav Tulach <jaroslav.tulach@enso.org>
[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/182955595)
This PR implements variable column widths in the new Grid View component. We need this feature to quickly implement various parts of the UI, including the breadcrumbs panel of the component browser.
There are two ways to change the width of the specific column:
1. "From the outside", using the `set_column_width` endpoint of the Grid View
2. "From the inside", using the `override_column_width` endpoint of the EntryFrp.
Both ways work similarly, but the latter is helpful for our breadcrumbs implementation, as it allows for entry to decide on the width of the column by its content.
See the screencast with three grid views. The top-left one has every even column shrunk by GridView API. Every grid view has a second column extended by EntryFrp API.
https://user-images.githubusercontent.com/6566674/185060985-7b7df076-c659-41fa-977a-22875493f8d4.mp4
[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/181870555)
This PR changes the relative position of the edited node in such a way that it is left-aligned to the component browser window. This change reflects the most recent version of the [design doc](https://github.com/enso-org/design/blob/main/epics/component-browser/design.md#overview)
<img width="1157" alt="Screenshot 2022-08-08 at 19 15 47" src="https://user-images.githubusercontent.com/6566674/183454192-81960e0a-ab69-43a4-b7df-d13320a9d16d.png">
As an additional change, the FRP implementation of the `Camera2d` was extended with a new output (screen dimensions) and fixed. With the old implementation, there was a possibility of panic at runtime because of non-exclusive borrows of `RefCell`. The FRP event for camera position was emited inside the scope with a mutable `RefCell` borrow. Any attempt to borrow the camera one more time (e.g., by calling one of the getters, such as `zoom()`) caused panic at runtime.
Importing individual methods didn't work as advertised because parser
would allow them but later drop that information. This slipped by because we never had mixed atoms and methods in stdlib.
# Important Notes
Added some basic tests but we need to ensure that the new parser allows for this.
@jdunkerley will be adding some changes to stdlib that will be testing this functionality as well.
Based on usage; I believe this handles every case in current `.enso` files.
# Important Notes
- `import` is a built-in macro, so an import statement parses as a `MultiSegmentApp`.
- Every `import` syntax will have a segment whose leading keyword is `import`; however `import` macros can be identified more efficiently by looking at only the first keyword. A `MultiSegmentApp` is an import if and only if its first keyword is in the set { "polyglot", "from", "import" }.
Show custom icons in Component Browser for entries that have a non-empty `Icon` section in their docs with the section's body containing a name of a predefined icon.
https://www.pivotaltracker.com/story/show/182584336
#### Visuals
A screenshot of a couple custom icons in the Component Browser:
<img width="346" alt="Screenshot 2022-07-27 at 15 55 33" src="https://user-images.githubusercontent.com/273837/181265249-d57f861f-8095-4933-9ef6-e62644e11da3.png">
# Important Notes
- The PR assigns icon names to four items in the standard library, but only three of them are shown in the Component Browser because of [a parsing bug in the Engine](https://www.pivotaltracker.com/story/show/182781673).
- Icon names are assigned only to four items in the standard library because only two currently predefined icons match entries in the currently defined Virtual Component Groups. Adjusting the definitions of icons and Virtual Component Groups is covered by [a different task](https://www.pivotaltracker.com/story/show/182584311).
- A bug in the documentation of the Enso protocol message `DocSection` is fixed. A `text` field in the `Tag` interface is renamed to `body` (this is the field name used in Engine).
This PR adds a new variant of selection, where the mouse-hovered entry is highlighted and may be selected by clicking.
In the video below, we have three grid views with slightly different settings:
* In the left-top corner, both hover and selection highlight is just a shape under the label. Such a grid view does not require additional layers (when compared to non-selectable grid view).
* In the left-bottom corner the hover is normal shape, but selection is a _masked layer_ which allows us to have different text color. This setting requires three more layers to render.
* In the right-top corner, both hover and selection are displayed in the masked layer, creating 6 additional layers.
https://user-images.githubusercontent.com/3919101/181514178-f243bfeb-f2dd-4507-adc3-5344ae0579b7.mp4
This change allows for importing modules using a qualified name and deals with any conflicts on the way.
Given a module C defined at `A/B/C.enso` with
```
type C
type C a
```
it is now possible to import it as
```
import project.A
...
val x = A.B.C 10
```
Given a module located at `A/B/C/D.enso`, we will generate
intermediate, synthetic, modules that only import and export the successor module along the path.
For example, the contents of a synthetic module B will look like
```
import <namespace>.<pkg-name>.A.B.C
export <namespace>.<pkg-name>.A.B.C
```
If module B is defined already by the developer, the compiler will _inject_ the above statements to the IR.
Also removed the last elements of some lowercase name resolution that managed to survive recent
changes (`Meta.Enso_Project` would now be ambiguous with `enso_project` method).
Finally, added a pass that detects shadowing of the synthetic module by the type defined along the path.
We print a warning in such a situation.
Related to https://www.pivotaltracker.com/n/projects/2539304
# Important Notes
There was an additional request to fix the annoying problem with `from` imports that would always bring
the module into the scope. The changes in stdlib demonstrate how it is now possible to avoid the workaround of
```
from X.Y.Z as Z_Module import A, B
```
(i.e. `as Z_Module` part is almost always unnecessary).
Fixes random timeout failures on CI.
```
INFO ide_ci::program::command: sbtℹ️ up to date, audited 98 packages in 3s
```
`npm install` takes 3s of test time doing unnecessary package auditing. On CI the command is executed once before running the tests and redundant `npm install` calls can be omitted.
This change modifies the current language by requiring explicit `self` parameter declaration
for methods. Methods without `self` parameter in the first position should be treated as statics
although that is not yet part of this PR. We add an implicit self to all methods
This obviously required updating the whole stdlib and its components, tests etc but the change
is pretty straightforward in the diff.
Notice that this change **does not** change method dispatch, which was removed in the last changes.
This was done on purpose to simplify the implementation for now. We will likely still remove all
those implicit selfs to bring true statics.
Minor caveat - since `main` doesn't actually need self, already removed that which simplified
a lot of code.
Provide a JNI dynamic-library interface to `enso_parser`.
# Important Notes
- The library can be built with: `cargo build -p enso-parser-jni`.
- A new `org.enso.syntax2.Parser` API is implemented on top of the JNI interface provided by `enso-parser-jni`.
- We are using the `jni` crate, since apparently Java cannot just call C-ABI functions. The crate is not well-maintained. I came across an obviously-unsound `safe` function, and found it was reported over a year ago, with a PR to fix: jni-rs/jni-rs#303. However our needs are simple. We can't trust any safety guarantees they imply, but I think we are unlikely to encounter any logic bugs using the basic bindings.
Significantly improves the polyglot Date support (as introduced by #3374). It enhances the `Date_Spec` to run it in four flavors:
- with Enso Date (as of now)
- with JavaScript Date
- with JavaScript Date wrapped in (JavaScript) array
- with Java LocalDate allocated directly
The code is then improved by necessary modifications to make the `Date_Spec` pass.
# Important Notes
James has requested in [#181755990](https://www.pivotaltracker.com/n/projects/2539304/stories/181755990) - e.g. _Review and improve InMemory Table support for Dates, Times, DateTimes, BigIntegers_ the following program to work:
```
foreign js dateArr = """
return [1, new Date(), 7]
main =
IO.println <| (dateArr.at 1).week_of_year
```
the program works with here in provided changes and prints `27` as of today.
@jdunkerley has provided tests for proper behavior of date in `Table` and `Column`. Those tests are working as of [f16d07e](f16d07e640). One just needs to accept `List<Value>` and then query `Value` for `isDate()` when needed.
Last round of changes is related to **exception handling**. 8b686b12bd makes sure `makePolyglotError` accepts only polyglot values. Then it wraps plain Java exceptions into `WrapPlainException` with `has_type` method - 60da5e70ed - the remaining changes in the PR are only trying to get all tests working in the new setup.
The support for `Time` isn't part of this PR yet.
**Note**: This PR also contains content of previous Grid View PR. We decided to discard the previous, because this one did some refactoring of old one, and it's not a big addition.
Added a scrollable::GridView component, which just embeds the GridView in ScrollArea. Also, re-worked the idea of text layers.
https://user-images.githubusercontent.com/3919101/179020359-512ee127-c333-4f86-bff5-f1cb4154e03c.mp4
This PR contains all work for finishing integration of first Component List Panel in the IDE:
* It adds a stub for the whole Component Browser View. The documentation panel is re-used from the old searcher.
* It has the presenter implementation, integrating the view with Hierarchical Component List from the controller.
* It extends the View API, so the integration is possible, making use of Component Group Set wrapper.
* The selection integration was also merged into this PR, because it depended on the API extension mentioned above. However, we should avoid such practice in the future.
https://user-images.githubusercontent.com/3919101/177816427-8c4285b4-8941-4048-a400-52f4acf77a9f.mp4
# Important Notes
There are some known issues, to-be-fixed in the future.
* The performance is bad. It should be improved with new text::Area, and the decent one shall come with [GridView inside component browser](https://www.pivotaltracker.com/story/show/182561072)
* There is no keyboard navigation. It should also be delivered with [GridView](https://www.pivotaltracker.com/story/show/182561072).
* The Favorites section is not [filtered out by node source type](https://www.pivotaltracker.com/story/show/182661634).
implement simple variable assignments and function definitions.
This implements:
- https://www.pivotaltracker.com/story/show/182497122
- https://www.pivotaltracker.com/story/show/182497144 (the code blocks are not created yet, but the function declaration is recognized.)
# Important Notes
- Introduced S-expression-based tests, and pretty-printing-roundtrip testing.
- Started writing tests for TypeDef based on the examples in the issue. None of them parse successfully.
- Fixed Number tokenizing.
- Moved most contents of parser's `main.rs` to `lib.rs` (fixes a warning).
Modified UppercaseNames to now resolve methods without an explicit `here` to point to the current module.
`here` was also often used instead of `self` which was allowed by the compiler.
Therefore UppercaseNames pass is now GlobalNames and does some extra work -
it translated method calls without an explicit target into proper applications.
# Important Notes
There was a long-standing bug in scopes usage when compiling standalone expressions.
This resulted in AliasAnalysis generating incorrect graphs and manifested itself only in unit tests
and when running `eval`, thus being a bit hard to locate.
See `runExpression` for details.
Additionally, method name resolution is now case-sensitive.
Obsolete passes like UndefinedVariables and ModuleThisToHere were removed. All tests have been adapted.
Implement generation of Java AST types from the Rust AST type definitions, with support for deserializing in Java syntax trees created in Rust.
### New Libraries
#### `enso-reflect`
Implements a `#[derive(Reflect)]` macro to enable runtime analysis of datatypes. Macro interface includes helper attributes; **the Rust types and the `reflect` attributes applied to them fully determine the Java types** ultimately produced (by `enso-metamodel`). This is the most important API, as it is used in the subject crates (`enso-parser`, and dependencies with types used in the AST). [Module docs](https://github.com/enso-org/enso/blob/wip/kw/parser/ast-transpiler/lib/rust/reflect/macros/src/lib.rs).
#### `enso-metamodel`
Provides data models for data models in Rust/Java/Meta (a highly-abstracted language-independent model--I have referred to it before as the "generic representation", but that was an overloaded term).
The high-level interface consists of operations on data models, and between them. For example, the only operations needed by [the binary that drives datatype transpilation](https://github.com/enso-org/enso/blob/wip/kw/parser/ast-transpiler/lib/rust/parser/generate-java/src/main.rs) are: `rust::to_meta`, `java::from_meta`, `java::transform::optional_to_null`, `java::to_syntax`.
The low-level interface consists of direct usage of the datatypes; this is used by [the module that implements some serialization overrides](https://github.com/enso-org/enso/blob/wip/kw/parser/ast-transpiler/lib/rust/parser/generate-java/src/serialization.rs) (so that the Java interface to `Code` references can produce `String`s on demand based on serialized offset/length pairs). The serialization override mechanism is based on customizing, not replacing, the generated deserialization methods, so as to be as robust as possible to changes in the Rust source or in the transpilation process.
### Important Notes
- Rust/Java serialization is exhaustively tested for structural compatibility. A function [`metamodel::meta::serialization::testcases`](https://github.com/enso-org/enso/blob/wip/kw/parser/ast-transpiler/lib/rust/metamodel/src/meta/serialization.rs) uses `reflect`-derived data to generate serialized representations of ASTs to use as test cases. Its should-accept cases cover every type a tree can contain; it also produces a representative set of should-reject cases. A Rust `#[test]` confirms that these cases are accepted/rejected as expected, and generated Java tests (see Binaries below) check the generated Java deserialization code against the same test cases.
- Deserializing `Code` is untested. The mechanism is in place (in Rust, we serialize only the offset/length of the `Cow`; in Java, during deserialization we obtain a context object holding a buffer for all string data; the accessor generated in Java uses the buffer and the offset/length to return `String`s), but it will be easier to test once we have implemented actually parsing something and instantiating the `Cow`s with source code.
- `#[tagged_enum]` [now supports](https://github.com/enso-org/enso/blob/wip/kw/parser/ast-transpiler/lib/rust/shapely/macros/src/tagged_enum.rs#L36-L51) control over what is done with container-level attributes; they can be applied to the container and variants (default), only to the container, or only to variants.
- Generation of `sealed` classes is supported, but currently disabled by `TARGET_VERSION` in `metamodel::java::syntax` so that tests don't require Java 15 to run. (The same logic is run either way; there is a shallow difference in output.)
### Binaries
The `enso-parser-generate-java` crate defines several binaries:
- `enso-parser-generate-java`: Performs the transpilation; after integration, this will be invoked by the build script.
- `java-tests`: Generates the Java code that tests format deserialization; after integration this command will be invoked by the build script, and its Java output compiled and run during testing.
- `graph-rust`/`graph-meta`/`graph-java`: Produce GraphViz representations of data models in different typesystems; these are for developing and understanding model transformations.
Until integration, a **script regenerates the Java and runs the format tests: `./tools/parser_generate_java.sh`**. The generated code can be browsed in `target/generated_java`.
If a node created by the user gets placed off-screen, the screen's camera is panned to make the node visible.
https://www.pivotaltracker.com/story/show/181188687
#### Visuals
A screencast showing a number of node creation scenarios when the camera is panned to the newly created node, including when zoomed out.
https://user-images.githubusercontent.com/273837/177169716-50a12b0a-c742-4b01-9766-56206e7938b9.mov
# Important Notes
- Camera is panned also if the node is only partially visible, or if there's not enough free space visible around the node. The specific amount of free space that needs to be visible around a newly created node is configured in the theme.
- If the screen area is so small that the node cannot be fully fit in it (either horizontally or vertically), showing the left and top boundaries of the node's area takes priority over showing the corresponding opposite edges.
Implement simple placeholder icons for all entry kinds supported in the Suggestion Database. The icons are planned to be used in Component Browser as default icons for entries. This is intended to allow visually distinguishing different entry kinds.
The following additional fixes and tweaks are applied:
- Icons previously using only 1 color from the theme now use the color provided through shape parameters instead.
- The `data_science` and `network` icons now use only the 2 colors provided through shape parameters.
- The `join` icon has its shape and colors modified and uses only the 2 colors provided through shape parameters.
- The demo scene now parametrizes icon shapes using colors from the Component Browser Design Doc.
https://www.pivotaltracker.com/story/show/182584322
#### Visuals
Original contents of the demo scene before the PR:
<img width="2197" alt="x-orig" src="https://user-images.githubusercontent.com/273837/176669422-ee2e14c7-9ef4-42fd-acb7-ae3be6b68587.png">
Final contents of the demo scene after the PR:
<img width="2201" alt="x2-final" src="https://user-images.githubusercontent.com/273837/176668720-6f1685fd-f7e6-44d7-85f5-f6a6d6789644.png">
A semi-manual s/this/self appied to the whole standard library.
Related to https://www.pivotaltracker.com/story/show/182328601
In the compiler promoted to use constants instead of hardcoded
`this`/`self` whenever possible.
# Important Notes
The PR **does not** require explicit `self` parameter declaration for methods as this part
of the design is still under consideration.
[Task link](https://www.pivotaltracker.com/story/show/182194574).
[ci no changelog needed]
This PR implements a new selection box that will replace an old (not really working) one in the component browser. The old selection box wasn't working well with the headers of the component groups, so we were forced to make a much harder implementation.
The new implementation duplicates some visual components and places them in a separate layer. Then, a rectangular mask cuts off everything that is not "selected". This way:
- We have more control over what the selected entries should look like.
- We can easily support the multi-layer structure of the component groups with headers.
- We avoid problems with nested masks that our renderer doesn't support at the moment.
To be more precise, we duplicate the following:
- Background of the component group becomes the "fill" of the selection.
- Entries text and icons - we can alter them easily.
- Header background and header text. By placing them in separate scene layers we ensure correct rendering order.
https://user-images.githubusercontent.com/6566674/173657899-1067f538-4329-44f9-9dc2-78c8a4708b5a.mp4
# Important Notes
- This PR implements the base of our future selection mechanism, selecting entries with a mouse and keyboard still has several issues that will be fixed in the future tasks.
- The scrolling behavior will also be improved in future tasks. Right we only restrict the selection box position so that it never leaves the borders of the component group.
- I added a new function to `add` shapes to new layers in a non-exclusive way (we had only `add_exclusive`) before. I have no idea how we didn't use this feature before even though we mention it a lot in the docs.
- The demo scene restricts the position of the selection box for one-column component groups but does not for the wide component group.
Remove a `Symbol`from the `SymbolRegistry` when its `SpriteSystem` is dropped.
This fixes the remaining buffer leak (after #3504) in https://www.pivotaltracker.com/story/show/181943457
# Important Notes
- The `SymbolRegistry` now assigns unique `SymbolId`s, so that we can tell if a `SymbolId` refers to a `Symbol` that has already been unregistered (this shouldn't happen, but it's not statically-obvious that it doesn't, so if it occurs we shouldn't misbehave).
- Also fix a bug in how `buffer_count` was tracked (we were decrementing more than incrementing!).
Auto-generate all builtin methods for builtin `File` type from method signatures.
Similarly, for `ManagedResource` and `Warning`.
Additionally, support for specializations for overloaded and non-overloaded methods is added.
Coverage can be tracked by the number of hard-coded builtin classes that are now deleted.
## Important notes
Notice how `type File` now lacks `prim_file` field and we were able to get rid off all of those
propagating method calls without writing a single builtin node class.
Similarly `ManagedResource` and `Warning` are now builtins and `Prim_Warnings` stub is now gone.
[ci no changelog needed]
This PR implements a new helper for the future Component Browser - `component_group::multi::Wrapper`. It propagates FRP events from multiple component groups and ensures that only a single component group is focused at all times.
See the updated component group demo scene (console logs shows propagated FRP events from all component groups):
https://user-images.githubusercontent.com/6566674/172359141-8ea6f1ba-e357-4c1b-852a-adb4d5207e03.mp4
- Fixed a `define_endpoints_2!` macro. FRP endpoints for `focus` events weren't connected properly.
- List View now uses an overlay shape to catch mouse events, it allows much easier implementation of `is_header_selected` in the component group.
Drop `Core` implementation (replacement for IR) as it (sadly) looks increasingly
unlikely this effort will be continued. Also, it heavily relies
on implicits which increases some compilation time (~1sec from `clean`)
Related to https://www.pivotaltracker.com/story/show/182359029
This PR introduces a new structure delivered by Searcher Controller: The Component List.
The Component list is hierarchical, and its structure reflects how the components are displayed in Component Browser - only "submodule" section at this point, other sections will be covered in next tasks.
This does not introduce anything visual; the structures are tested in unit tests.
- Change dev profile settings. Improves build performance; will not affect anything else. Details below.
- Introduce script for benchmarking various incremental builds. Usage is explained in the script comments.
- Add a line to `intervals` showing total main-thread CPU work logged in a profile; this can be used to compare the results of optimizations (I'll be starting a discussion informed by that data separately; this change just enables the tooling to report it).
Define some workflows for batch-mode profiling.
Implemented:
- collapse nodes
- create node
- enter collapsed node
- new project
- open visualization
They can currently be built and run with a command like:
`./run.sh ide build --profiling-level=debug && dist/ide/linux-unpacked/enso --entry-point profile --workflow create_node --save-profile out.json`
And the data can be displayed with:
`dist/ide/linux-unpacked/enso --entry-point profiling_run_graph --load-profile out.json`
Demo of recording and viewing a profile with a command-line one-liner:
https://user-images.githubusercontent.com/1047859/169954795-2d9520ca-84f9-45d2-b83a-5063ebe6f718.mp4
See: https://www.pivotaltracker.com/story/show/182195399.
# Important Notes
- When defining workflows, two helpers are enough to allow us to tell when the action is really done: `Fixture::compile_new_shaders`, and `Fixture::backend_execution`. Often, it is appropriate to await both, but it depends on the task.
- The shader compiler is now driven by a `Controller`; while the `Compiler` is reset if context is lost, the `Controller`'s state survives context loss.
- A new `--load-profile` option supports specifying a profile by path when running `profiling_run_graph`.
- Drop the `with_same_start` profiler interface; we ended up preferring a child profiler convention, and this interface was not implemented compatibly with the stricter data model we've had since the introduction of `profiler::data`.
- Fix the noisy `rustfmt` output.
This change introduces a custom LogManager for console that allows for
excluding certain log messages. The primarily reason for introducing
such LogManager/Appender is to stop issuing hundreds of pointless
warnings coming from the analyzing compiler (wrapper around javac) for
classes that are being generated by annotation processors.
The output looks like this:
```
[info] Cannot install GraalVM MBean due to Failed to load org.graalvm.nativebridge.jni.JNIExceptionWrapperEntryPoints
[info] compiling 129 Scala sources and 395 Java sources to /home/hubert/work/repos/enso/enso/engine/runtime/target/scala-2.13/classes ...
[warn] Unexpected javac output: warning: File for type 'org.enso.interpreter.runtime.type.ConstantsGen' created in the last round will not be subject to annotation processing.
[warn] 1 warning.
[info] [Use -Dgraal.LogFile=<path> to redirect Graal log output to a file.]
[info] Cannot install GraalVM MBean due to Failed to load org.graalvm.nativebridge.jni.JNIExceptionWrapperEntryPoints
[info] foojavac Filer
[warn] Could not determine source for class org.enso.interpreter.node.expression.builtin.number.decimal.CeilMethodGen
[warn] Could not determine source for class org.enso.interpreter.node.expression.builtin.resource.TakeNodeGen
[warn] Could not determine source for class org.enso.interpreter.node.expression.builtin.error.ThrowErrorMethodGen
[warn] Could not determine source for class org.enso.interpreter.node.expression.builtin.number.smallInteger.MultiplyMethodGen
[warn] Could not determine source for class org.enso.interpreter.node.expression.builtin.warning.GetWarningsNodeGen
[warn] Could not determine source for class org.enso.interpreter.node.expression.builtin.number.smallInteger.BitAndMethodGen
[warn] Could not determine source for class org.enso.interpreter.node.expression.builtin.error.ErrorToTextNodeGen
[warn] Could not determine source for class org.enso.interpreter.node.expression.builtin.warning.GetValueMethodGen
[warn] Could not determine source for class org.enso.interpreter.runtime.callable.atom.AtomGen$MethodDispatchLibraryExports$Cached
....
```
The output now has over 500 of those and there will be more. Much more
(generated by our and Truffle processors).
There is no way to tell SBT that those are OK. One could potentially
think of splitting compilation into 3 stages (Java processors, Java and
Scala) but that will already complicate the non-trivial build definition
and we may still end up with the initial problem.
This is a fix to make it possible to get reasonable feedback from
compilation without scrolling mutliple screens *every single time*.
Also fixed a spurious warning in javac processor complaining about
creating files in the last round.
Related to https://www.pivotaltracker.com/story/show/182138198
There are two dirty flags in layers: depth_order_dirty and element_depth_order_dirty - one marking changed in Layer, second marking change in one of sublayers. The depth_order_dirty has a proper callback for setting element_depth_order_dirty of its parent. However, the latter did not propagate up.
I fixed it by adding callback for element_depth_order_dirty which sets the depth_order_dirty of the parent.
# Important Notes
* The question to @wdanilo : is it possible, that I can propagate dirty directly to element_depth_order_dirty, without setting depth_order_dirty? As far as I understand the code, it would also work (and we would omit some unnecessary updates).
* I tried to leave some logs, but I don't feel how to do that: the tooling I used was very specific, only the concrete ids of symbols and layers were logged, and I don't know how to generalize it.
Add a method in `SuggestionDatabase` allowing to find a suggestion entry by a fully qualified path, working faster than a linear search through all the entries in the `SuggestionDatabase`.
https://www.pivotaltracker.com/story/show/181852566
# Important Notes
- **Testing:** when testing the PR with the newest currently available nightly version of the Engine, you may observe the following warnings in the Chrome JS Developer Console (the numerical values may differ):
index.ts?ab16:289 WARN app/gui/src/model/suggestion_database.rs:61 An existing suggestion entry id at Standard.Base.Nothing.Nothing.is_nothing was overwritten with 768.
index.ts?ab16:289 WARN app/gui/src/model/suggestion_database.rs:61 An existing suggestion entry id at Standard.Base.Data.Numbers.Integer.up_to was overwritten with 936.
index.ts?ab16:289 WARN app/gui/src/model/suggestion_database.rs:61 An existing suggestion entry id at Standard.Base.Data.Numbers.Integer.down_to was overwritten with 937.
index.ts?ab16:289 WARN app/gui/src/model/suggestion_database.rs:61 An existing suggestion entry id at Standard.Base.Data.Text.Text.== was overwritten with 971.
This is a result of bugs in the Standard Library. Those are planned to be addressed by:
- #3480 short-term (to fix the specific bugs currently present in the Standard Library),
- https://www.pivotaltracker.com/story/show/182283983 long-term (to improve the Engine such that it disallows introducing this category of bugs in the Standard Library in the future).
(For more details, see also: https://discord.com/channels/401396655599124480/978929754138877962.)
As a result of the bugs mentioned above, the Engine is responding with some invalid replies. In case of such invalid replies, warnings are emitted in the JS Dev Console. Other than the warnings, the code is expected to work correctly with the Engine for the cases when the Engine returns correct data.
- A `HashMapTree` was used for storing the map. A quick back-of-the-envelope estimation of memory usage of a simpler alternative (a one-level `HashMap`) would put the alternative at ~1MB (~10k entities × averaged ~100 bytes per entity path), which was considered too much in a discussion with @farmaazon.
- The `HashMapTree::remove` method deletes a whole subtree of a `HashMapTree`. An alternative removal method was implemented for use in `suggestion_database::QualifiedNameToIdMap` to better match `HashMap` entry removal semantics.
- In case of path collisions, a warning is emitted.
- Paths are treated case-sensitively.
- The new method of the `SuggestionDatabase` type is currently only used in unit tests. This matches the explicit requirement in the Task's description.
- JS Developer Console logging was enabled for the `tracing` package. The `WARN` level was picked to match the default level enabled in the "old" logging infrastructure.
[ci no changelog needed]
@radeusgd discovered that no formatting was being applied to std-bits projects.
This was caused by the fact that `enso` project didn't aggregate them. Compilation and
packaging still worked because one relied on the output of some tasks but
```
sbt> javafmtAll
```
didn't apply it to `std-bits`.
# Important Notes
Apart from `build.sbt` no manual changes were made.
This PR extends the Component Group Entry with icon and option to highlight the text. Here the convert has highlighted "con".
https://user-images.githubusercontent.com/3919101/169046537-4f8b823c-322e-40dc-8abb-24d1d7092341.mp4
### Important Notes
Although this PR includes effort for adjusting Component Group style to better reflect the design, it is not entirely finished: the selection still works badly and will be fixed in another PR.
This is the 2nd part of DSL improvements that allow us to generate a lot of
builtins-related boilerplate code.
- [x] generate multiple method nodes for methods/constructors with varargs
- [x] expanded processing to allow for @Builtin to be added to classes and
and generate @BuiltinType classes
- [x] generate code that wraps exceptions to panic via `wrapException`
annotation element (see @Builtin.WrapException`
Also rewrote @Builtin annotations to be more structured and introduced some nesting, such as
@Builtin.Method or @Builtin.WrapException.
This is part of incremental work and a follow up on https://github.com/enso-org/enso/pull/3444.
# Important Notes
Notice the number of boilerplate classes removed to see the impact.
For now only applied to `Array` but should be applicable to other types.
[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/181725003)
This PR implements a fully visible component group header while scrolling the group (using the ScrollArea).
The header moves in sync with scrolling movements (using new `set_header_pos` FRP input), so it looks like the component group is scrolled. ScrollArea masks the "scrolled" entries above the header. This design allows a fully visible header even though our renderer doesn't support nested layers masking yet.
The screencast:
https://user-images.githubusercontent.com/6566674/168320360-2c2017b2-0ef5-42ce-9c79-82b9641c1d73.mp4
The most recent one, with the updated demo scene from develop:
https://user-images.githubusercontent.com/6566674/168555268-8552c4b0-f887-4388-89a1-e65ddf668be6.mp4
# Important Notes
- I fixed the API of the list view so now it supports non-hardcoded scene layers (previously it did not). I also believe it was implemented incorrectly.
- I've found a [pretty weird bug](https://www.pivotaltracker.com/story/show/182193824): the component group inside the ScrollArea is invisible unless I add some arbitrary shape to the scroll area content. I use a `transparent_circle` for this purpose in the demo scene. The bug is probably related to masking the sublayers, though I wasn't able to reproduce it properly on a simpler example.
- The selection box is removed from the demo scene as agreed with @farmaazon . The correct implementation has proven to be much harder than I expected, and we will implement another approach in a separate PR.
- I also modified the `shadow::Parameters` so that it uses `Var`s instead of plain values.
* Extends the instrumentation of the code base and upgrades some FRPs to the newer API macro.
* Extends the run-graph demo scene to specify a profile via URL without recompilation.
* Fixes labels in the flame graph demo scene.
* Fixes an issue with loading profiles that contains escaped characters.
# Important Notes
* no longer contains the upgrade of the `text::View` to `define_endpoints_2`. This should be fixed as part of the text rendering rewrite.
[ci no changelog needed]
Parametrize the colors used in a Component Group view based on a single color passed to an FRP input.
Customizing the colors of a Component Group will be needed for the larger Component Group List panel. This customization will work as a visual hint for the User, helping them to distinguish different Component Groups in the panel. A single input color will be configured for every Component Group in the `package.yaml` file (see the Design Doc). Therefore, all shades of the color required by the Component Group view must be calculated from this single input color.
https://www.pivotaltracker.com/story/show/181725039
#### Visuals
The following screencast of the `component_group` debug scene shows how all required shades of color are calculated from a single input color. It also shows a new "dimmed" display mode of the Component Group. The debug scene does not support selecting entries in a "dimmed" Component Group, as this is not required by the Design Doc.
https://user-images.githubusercontent.com/273837/168074651-bf3d5ea5-99b0-4b69-9934-ad8565ffc54e.mov
The following is a screenshot of the Node Searcher, to demonstrate that it still works correctly:
<img width="623" alt="Screenshot 2022-05-09 at 17 13 01" src="https://user-images.githubusercontent.com/273837/167441109-e9a47b5a-45a2-4172-85ed-c593e43e02d6.png">
# Important Notes
- A new type `Params` was added in the `list_view::entry::Entry` trait. This was needed to allow passing FRP information to entries separately for every ListView instance.
- Note: `style_prefix` and `max_width_px` parameters of the `list_view::entry::Entry::new` function may get moved into the new `Params` type in the future. To save time, this was not attempted in this PR, as agreed with @farmaazon.
[ci no changelog needed]
* Extends the instrumentation of the code base and upgrades some FRPs to the newer API macro.
* Extends the run-graph demo scene to specify a profile via URL without recompilation.
* Fixes labels in the flame graph demo scene.
* Fixes an issue with loading profiles that contains escaped characters.
# Important Notes
[ci no changelog needed]
A low-hanging fruit where we can automate the generation of many
@BuiltinMethod nodes simply from the runtime's methods signatures.
This change introduces another annotation, @Builtin, to distinguish from
@BuiltinType and @BuiltinMethod processing. @Builtin processing will
always be the first stage of processing and its output will be fed to
the latter.
Note that the return type of Array.length() is changed from `int` to
`long` because we probably don't want to add a ton of specializations
for the former (see comparator nodes for details) and it is fine to cast
it in a small number of places.
Progress is visible in the number of deleted hardcoded classes.
This is an incremental step towards #181499077.
# Important Notes
This process does not attempt to cover all cases. Not yet, at least.
We only handle simple methods and constructors (see removed `Array` boilerplate methods).
Implement a command that launches the application, runs a series of steps (a "workflow"), writes a profile to a file, and exits.
See: [#181775808](https://www.pivotaltracker.com/story/show/181775808)
# Important Notes
- The command to capture run and profile is used like: `./run profile --workflow=new_project --save-profile=out.json`. Defining some more workflows (collapse nodes, create node and edit value) comes next; they are implemented with the same infrastructure as the integration-tests.
- The `--save-profile` option can also be used when profiling interactively; when the option is provided, capturing a profile with the hotkey will write a file instead of dumping the data to the devtools console.
- If the IDE panics, the error message is now printed to the console that invoked the process, as well as the devtools console. (If a batch workflow fails, this allows us to see why.)
- New functionality (writing profile files, quitting on command, logging to console) relies on Electron APIs. These APIs are implemented in `index.js`, bridged to the render process in `preload.js`, and wrapped for use in Rust in a `debug_api` crate.
In order to analyse why the `runner.jar` is slow to start, let's _"self sample"_ it using the [sampler library](https://bits.netbeans.org/dev/javadoc/org-netbeans-modules-sampler/org/netbeans/modules/sampler/Sampler.html). As soon as the `Main.main` is launched, the sampling starts and once the server is up, it writes its data into `/tmp/language-server.npss`.
Open the `/tmp/language-server.npss` with [VisualVM](https://visualvm.github.io) - you should have one copy in your
GraalVM `bin/jvisualvm` directory and there has to be a GraalVM to run Enso.
#### Changelog
- add: the `MethodsSampler` that gathers information in `.npss` format
- add: `--profiling` flag that enables the sampler
- add: language server processes the updates in batches
This PR replaces hard-coded `@Builtin_Method` and `@Builtin_Type` nodes in Builtins with an automated solution
that a) collects metadata from such annotations b) generates `BuiltinTypes` c) registers builtin methods with corresponding
constructors.
The main differences are:
1) The owner of the builtin method does not necessarily have to be a builtin type
2) You can now mix regular methods and builtin ones in stdlib
3) No need to keep track of builtin methods and types in various places and register them by hand (a source of many typos or omissions as it found during the process of this PR)
Related to #181497846
Benchmarks also execute within the margin of error.
### Important Notes
The PR got a bit large over time as I was moving various builtin types and finding various corner cases.
Most of the changes however are rather simple c&p from Builtins.enso to the corresponding stdlib module.
Here is the list of the most crucial updates:
- `engine/runtime/src/main/java/org/enso/interpreter/runtime/builtin/Builtins.java` - the core of the changes. We no longer register individual builtin constructors and their methods by hand. Instead, the information about those is read from 2 metadata files generated by annotation processors. When the builtin method is encountered in stdlib, we do not ignore the method. Instead we lookup it up in the list of registered functions (see `getBuiltinFunction` and `IrToTruffle`)
- `engine/runtime/src/main/java/org/enso/interpreter/runtime/callable/atom/AtomConstructor.java` has now information whether it corresponds to the builtin type or not.
- `engine/runtime/src/main/scala/org/enso/compiler/codegen/RuntimeStubsGenerator.scala` - when runtime stubs generator encounters a builtin type, based on the @Builtin_Type annotation, it looks up an existing constructor for it and registers it in the provided scope, rather than creating a new one. The scope of the constructor is also changed to the one coming from stdlib, while ensuring that synthetic methods (for fields) also get assigned correctly
- `engine/runtime/src/main/scala/org/enso/compiler/codegen/IrToTruffle.scala` - when a builtin method is encountered in stdlib we don't generate a new function node for it, instead we look it up in the list of registered builtin methods. Note that Integer and Number present a bit of a challenge because they list a whole bunch of methods that don't have a corresponding method (instead delegating to small/big integer implementations).
During the translation new atom constructors get initialized but we don't want to do it for builtins which have gone through the process earlier, hence the exception
- `lib/scala/interpreter-dsl/src/main/java/org/enso/interpreter/dsl/MethodProcessor.java` - @Builtin_Method processor not only generates the actual code fpr nodes but also collects and writes the info about them (name, class, params) to a metadata file that is read during builtins initialization
- `lib/scala/interpreter-dsl/src/main/java/org/enso/interpreter/dsl/MethodProcessor.java` - @Builtin_Method processor no longer generates only (root) nodes but also collects and writes the info about them (name, class, params) to a metadata file that is read during builtins initialization
- `lib/scala/interpreter-dsl/src/main/java/org/enso/interpreter/dsl/TypeProcessor.java` - Similar to MethodProcessor but handles @Builtin_Type annotations. It doesn't, **yet**, generate any builtin objects. It also collects the names, as present in stdlib, if any, so that we can generate the names automatically (see generated `types/ConstantsGen.java`)
- `engine/runtime/src/main/java/org/enso/interpreter/node/expression/builtin` - various classes annotated with @BuiltinType to ensure that the atom constructor is always properly registered for the builitn. Note that in order to support types fields in those, annotation takes optional `params` parameter (comma separated).
- `engine/runtime/src/bench/scala/org/enso/interpreter/bench/fixtures/semantic/AtomFixtures.scala` - drop manual creation of test list which seemed to be a relict of the old design
* Initial integration with Frgaal in sbt
Half-working since it chokes on generated classes from annotation
processor.
* Replace AutoService with ServiceProvider
For reasons unknown AutoService would fail to initialize and fail to
generate required builtin method classes.
Hidden error message is not particularly revealing on the reason for
that:
```
[error] error: Bad service configuration file, or exception thrown while constructing Processor object: javax.annotation.processing.Processor: Provider com.google.auto.service.processor.AutoServiceProcessor could not be instantiated
```
The sample records is only to demonstrate that we can now use newer Java
features.
* Cleanup + fix benchmark compilation
Bench requires jmh classes which are not available because we obviously
had to limit `java.base` modules to get Frgaal to work nicely.
For now, we default to good ol' javac for Benchmarks.
Limiting Frgaal to runtime for now, if it plays nicely, we can expand it
to other projects.
* Update CHANGELOG
* Remove dummy record class
* Update licenses
* New line
* PR review
* Update legal review
Co-authored-by: Radosław Waśko <radoslaw.wasko@enso.org>
* New JSON profile format.
* Use string-table optimization for labels in JSON format.
* Use TimeOffset header to render beanpoles
* Log RPC messages sent to the backend.
* Display RPC requests on graph
* Simplify metadata-logging interface.
Implements a visualization that is integrated with our GUI profiling visualization for the multiprocess data implemented in #3395https://user-images.githubusercontent.com/1428930/165915395-c850c7b2-1cc5-4eb0-8f21-37565d113b1e.mp4
The visualization shows a horizontal line for Engine, Language Server and GUI and renders arrows for each message passed between them. Information about the message is revealed on hover.
# Important Notes
* this PR refactors the tooltip mechanism. Note that this has not been in active use anywhere else, as tooltips for node received a custom implementation and the tooltip that was previously implemented was used nowhere else yet.
[ci no changelog needed]
* The List View component was refactored: it allows for hiding the internal selection widget, and exposes information where the widget should be placed. This allows us to create selection widget in component list panel, so it can be animated between component groups and sections.
* Fixed some warnings when checking WASM code.
* Adjusted the style of Component Group View a little, so it better reflects the design doc. Still not ideal, because the list_view has some weird design regarding padding, but I don't want to stuck in some bigger refactoring.
I will add a video in a few minutes.
# Important Notes
https://user-images.githubusercontent.com/3919101/165507826-60329f9e-7de3-4eb2-9271-292e45568cb2.mov
[ci no changelog needed]
This is fixed copy of already reviewed #3384
[Task link](https://www.pivotaltracker.com/story/show/181413200)
This PR implements content clipping for the ScrollArea component.
List of changes:
- Implemented `InstanceWithAttachedLayer` abstraction that allows creating additional sublayers for our components. In the future, this abstraction can be used for text rendering as well (right now text rendering requires additional hardcoded layers).
- Fixed `complex-shape-system` demo scene by removing `node_searcher_mask` layer.
- Fixed `SublayersModel::remove` - it was not clearing the `layer_placement` hashmap.
- Implemented disabling the wheel scrolling in `Navigator`, and refactored it to reduce the number of functions arguments by introducing a `NavigatorSettings` struct.
Video (`scroll_area` demo):
https://user-images.githubusercontent.com/6566674/164506455-e177a7a7-9f1c-4f50-888f-112423cebbe4.mp4
# Important Notes
- `InstanceWithAttachedLayer` is implemented in such a way that it allows an extension in the future - namely to use it to simplify text rendering. The implementation might be simplified though.
[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/181413200)
This PR implements content clipping for the ScrollArea component.
List of changes:
- Implemented `InstanceWithAttachedLayer` abstraction that allows creating additional sublayers for our components. In the future, this abstraction can be used for text rendering as well (right now text rendering requires additional hardcoded layers).
- Fixed `complex-shape-system` demo scene by fixing `node_searcher_mask` layer.
- Fixed `SublayersModel::remove` - it was not clearing the `layer_placement` hashmap.
- Implemented disabling the wheel scrolling in `Navigator`, and refactored it to reduce the number of functions arguments by introducing a `NavigatorSettings` struct.
Video (`scroll_area` demo):
https://user-images.githubusercontent.com/6566674/164506455-e177a7a7-9f1c-4f50-888f-112423cebbe4.mp4
# Important Notes
- `InstanceWithAttachedLayer` is implemented in such a way that it allows an extension in the future - namely to use it to simplify text rendering. The implementation might be simplified though.
Changelog:
- fix: `search/completion` request with the position parameter.
- fix: `refactoring/renameProject` request. Previously it did not take into account the library namespace (e.g. `local.`)
See: [#181837344](https://www.pivotaltracker.com/story/show/181837344).
I've separated this PR from some deeper changes I'm making to the profile format, because the changeset was getting too complex. The new APIs and tools in this PR are fully-implemented, except the profile format is too simplistic--it doesn't currently support headers that are needed to determine the relative timings of events from different processes.
- Adds basic support for profile files containing data collected by multiple processes.
- Implements `api_events_to_profile`, a tool for converting backend message logs (#3392) to the `profiler` format so they can be merged with frontend profiles (currently they can be merged with `cat`, but the next PR will introduce a merge tool).
- Introduces `message_beanpoles`, a simple tool that diagrams timing relationships between frontend and backend messages.
### Important Notes
- All TODOs introduced here will be addressed in the next PR that defines the new format.
- Introduced a new crate, `enso_profiler_enso_data`, to be used by profile consumers that need to refer to Enso application datatypes to interpret metadata.
- Introduced a `ProfileBuilder` abstraction for writing the JSON profile format; partially decouples the runtime event log structures from the format definition.
- Introducing the conversion performed for `ProfilerBuilder` uncovered that the `.._with_same_start!` low-level `profiler` APIs don't currently work; they return `Started<_>` profilers, but that is inconsistent with the stricter data model that I introduced when I implemented `profiler_data`; they need to return profilers in a created, unstarted state. Low-level async profilers have not been a priority, but once #3382 merges we'll have a way to render their data, which will be really useful because async profilers capture *why* we're doing things. I'll bring up scheduling this in the next performance meeting.
Add logging of EnsoGL performance stats to the profiling framework. Also extends the visualization in the debug scene to show an overview of the performance stats. We now render a timeline of blocks that indicate by their colour the rough FPS range we are in:
https://user-images.githubusercontent.com/1428930/162433094-57fbb61a-b502-43bb-8815-b7fc992d3862.mp4
# Important Notes
[ci no changelog needed]
Needs to be merged after https://github.com/enso-org/enso/pull/3382 as it requires some changes about metadata logging from there. That is why this PR is currently still in draft mode and based on that branch.
Result of automatic formatting with `scalafmtAll` and `javafmtAll`.
Prerequisite for https://github.com/enso-org/enso/pull/3394
### Important Notes
This touches a lot of files and might conflict with existing PRs that are in progress. If that's the case, just run
`scalafmtAll` and `javafmtAll` after merge and everything should be in order since formatters should be deterministic.
Changelog:
- add: component groups to package descriptions
- add: `executionContext/getComponentGroups` method that returns component groups of libraries that are currently loaded
- doc: cleanup unimplemented undo/redo commands
- refactor: internal component groups datatype
* Profiling: intervals tool
* devtools profile generator
* docs
* ignore open intervals, because devtools does
* intervals tool: show interval counts
* Re-add a doc comment. Was accidentally deleted.
* Implement review.
* DURATION_FLOOR_MS
* Rename methods that apply a profile's contents to self
* Description of chrome format
* Link to profile.json format documentation is design doc
* Implement profiling-level switch described in design doc
* lint
In this branch:
* The workaround for cursor-not-being-updated-after-closing-searcher bug (discovered while testing #3278) is reverted.
* The proper fix was introduced: created an abstraction for EnsoGL component, which, when dropping, will not immediately drop the FRP network and model, but instead put it into the Garbage Collector. The Collector ensures, that all "component hiding" effects and events will be handled, and drops FRP network and model only after that.
* I run clippy for wasm32 target out of curiosity. There was one warning, and I fixed it on this branch.
When a new node is created with the <kbd>TAB</kbd> key or by clicking the `(+)` on-screen button while multiple nodes are selected, place the new node below all the selected nodes. (Previously, the new node was placed below the node that was selected earliest.)
Additionally, when placing a new node below an existing non-error node with a visualization enabled, place the new node below the visualization. (Previously, the new node was placed to the left of the visualization.)
https://www.pivotaltracker.com/story/show/180887079
#### Visuals
The following screencast demonstrates the feature on various arrangements of selected nodes, with visualization enabled and disabled.
https://user-images.githubusercontent.com/273837/159971452-148aa4d7-c0f3-4b48-871a-a2783989f403.mov
The following screencast demonstrates that new nodes created by double-clicking an output port of a node with visualization enabled are now placed below the visualization:
https://user-images.githubusercontent.com/273837/160107733-e3f7d0f9-0161-49d1-8cbd-06e18c843a20.mov
# Important Notes
- Some refactorings that were needed for this PR were ported from the #3301 PR:
- the code responsible for calculating the positions of new nodes was moved to a separate module (`new_node_position`);
- the `free_place_finder` module was made a submodule of the `new_node_position` module, due to the latter being its only user.
Use a new algorithm for placement of new nodes in cases when:
- a) there is no selected node, and the `TAB` key is pressed while the mouse pointer is near an existing node (especially in an area below an existing node);
- b) a connection is dragged out from an existing node and dropped near the node (especially in an area below the node).
In both cases mentioned above, the new node will now be placed in a location suggested by an internal algorithm, aligned to existing nodes. Specifically, the placement algorithm used is similar to when pressing `TAB` with a node selected.
For more details, see: https://www.pivotaltracker.com/story/show/181076066
# Important Notes
- Visible visualizations enabled with the "eye icon" button are treated as part of a node. (In case of nodes with errors, visualizations are not visible, and are not treated as part of a node.)
[ci no changelog needed]
This PR adds a few simple unit tests for GraphEditor, that can be used as an example of native Unit Tests.
Covered:
1. Creating nodes
- By internal API
- By using a TAB shortcut
- By using (+) button
- By dropping edge
2. Connecting two nodes with an edge
Some APIs were extended to allow their testing.
Usage of `glyph::System` in `text/component/area` was disabled by conditional compilation, as this code can't be used in native code due to JS dependencies.
* Profiling application details
Add enough profiling to account for every missed frame during startup.
See https://www.pivotaltracker.com/story/show/181499507
* Build ActiveInterval hierarchy in profiler_data
* update doctests / await_!
* docs/formatting/naming
* more graph modes
* increase WASM size
Due to new render-profile-flamegraph scene. We should remove these from the main release WASM blob one way or another.
* lint
* fix a test
* Organization (feedback)
* Add @wdanilo to Cargo.lock CODEOWNERS
As discussed after my previous PR got stuck waiting for Cargo.lock review.
* fix doctests
* Update docs. Removed a limitation.
@akavel spotted a compilation error, when building test for graph_editor crate. The cause was that:
* prelude without serde still added serde derivatives in im_string_newtype
* and the graph_editor needs serde from prelude anyway (because it wants to have serializable ImStrings).
In this PR two things are implemented:
1. Node Searcher zoom factor (and therefore its size) is fixed no matter how you move the main camera. The node searcher is also positioned directly below currently edited node at all times.
2. Node growth/shrink animation when you start/finish node editing. After animation end the edited node zoom factor is also fixed and matches the zoom factor of the node searcher.
See attached video with different ways of editing/creating nodes:
https://user-images.githubusercontent.com/6566674/157348758-2880aa2b-494d-46e6-8eee-a22be84081ed.mp4
#### Technical details
1. Added several additional scene layers for separate rendering: `node_searcher`, `node_searcher_text`, `edited_node`, `edited_node_text`. Searcher is always rendered by `node_searcher` camera, edited node moves between its usual layers and `edited_node` layer. Because text rendering uses different API, all node components were modified to support change of the layer.
2. Also added `node_searcher` DOM layer, because documentation is implemented as a DOM object.
3. Added two FRP endpoints for `ensogl::Animation`: `on_end` and `set_value`. These endpoints are useful while implementing growth/shrink animation.
4. Added FRP endpoints for the `Camera2d`: `position` and `zoom` outputs. This allows to synchronize cameras easily using FRP networks.
5. Growth/shrink animation implemented in GraphEditor by blending two animations, similar to Node Snapping implementation. However, shrinking animation is a bit tricky to implement correctly, as we must always return node back to the `main` scene layer after editing is done.
* Creating a new node with the (+) button (#3278)
[The Task](https://www.pivotaltracker.com/story/show/180887253)
A new (+) button on the left-bottom corner appeared. It may be clicked to open searcher in the middle of the scene, as an alternative to tab key.
https://user-images.githubusercontent.com/3919101/154514279-7972ed6a-0203-47cb-9a09-82dba948cf2f.mp4
* The window_control_buttons::common was extracted to separate crate `ensogl-component-button` almost without change.
* This includes a severe refactoring of adding nodes in general in the Graph Editor. The whole responsibility of adding new nodes (and starting their editing) was moved to Graph Editor - the Project View only reacts for GE events to show searcher properly.
* The status bar was moved from the bottom-left corner to the middle-top of the scene. It does not collide with (+) button, and plays "notification" role anyway.
* The `interface` debug scene was buggy. The problem was with one expression's span-tree. When I replaced it, the scene works.
* I've removed "new searcher" API, as it is completely outdated.
* I've changed code owners of integration tests to GUI team, as it is the team writing mostly the integration tests (int rust)
* Fix regression #181528359
* Add docs & remove unused function
* Fix & enable native Rust tests
* Fix formatting
Co-authored-by: Adam Obuchowicz <adam.obuchowicz@enso.org>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
[ci no changelog needed]
This PR reverts commit [0836ce741d](0836ce741d) because of the spotted regression:
To reproduce:
1. Open a default project.
2. Without doing anything else, cmd + click on any node to edit it.
3. Abort editing by pressing escape.
4. Top-most node disappears (it is actually removed from scene)
If you start editing the bottom node - you will also see a visible regression in node searcher's position.
See thread https://discord.com/channels/401396655599124480/950730235719065620/950731247909478410 for details.
Add an API to create a flame graph from profiling data. Also adds a demo scene showcasing the functionality that generates some profiling data by measuring dummy function calls and rendering a flame graph for the dummy data (see video for the result).
Not that the functionality is not yet exposed user-facing in the GUI itself, but only as API and demo scene, therefore [ci no changelog needed]
https://user-images.githubusercontent.com/1428930/155118977-ecac0628-777c-48bd-9aa7-30ee6aef1976.mp4
# Important Notes
* Change from the initial design: labels are shown on the flame graph instead of as a tooltip. This is because tooltips are currently only implemented in the graph editor and would require some additional refactoring (probably taking the better part of a day).
* re-instated the behaviour that logs are shown in the JS console if development mode is active.
API for storing metadata.
See: https://www.pivotaltracker.com/story/show/181149277
# Important Notes
**New APIs**:
- Storing metadata is implemented with `profiler::MetadataLogger`.
- A full metadata storage/retrieval example is in [the top-level doctests](https://github.com/enso-org/enso/blob/wip/kw/profiling-metadata-api/lib/rust/profiler/data/src/lib.rs) for profiler::data, a crate which implements an API for profiling data consumers (it abstracts away the low-level details of the event log, and checks its invariants in the process) [after review of this new API here I'll open a PR to add it to the design doc].
**Implementation**:
- `profiler::Event` is parameterized by a metadata type, so that different types of metadata can be dependency-injected into it.
- A data consumer defines its metadata type as an enum of all the kinds of metadata it is interested in.
- Producing the metadata enum is accomplished without defining its type (which would require dependencies from around the app): A `MetadataLogger` internally use a serialization helper `Variant` to serialize its variant of the metadata enum without knowledge of the other possible variants.
**Performance impact**: still in the low ns/measurement range, comparable to pushing to a vec.
*Note*: `LocalVecBuilder` is currently present under the name `Log`, which is accurate but probably too overloaded. I'd like to find the right name for it, document it with examples, and move it to its own crate under data-structures, but I don't want doing that to hold up this PR.
[The Task](https://www.pivotaltracker.com/story/show/180887253)
A new (+) button on the left-bottom corner appeared. It may be clicked to open searcher in the middle of the scene, as an alternative to tab key.
https://user-images.githubusercontent.com/3919101/154514279-7972ed6a-0203-47cb-9a09-82dba948cf2f.mp4
# Important Notes
* The window_control_buttons::common was extracted to separate crate `ensogl-component-button` almost without change.
* This includes a severe refactoring of adding nodes in general in the Graph Editor. The whole responsibility of adding new nodes (and starting their editing) was moved to Graph Editor - the Project View only reacts for GE events to show searcher properly.
* The status bar was moved from the bottom-left corner to the middle-top of the scene. It does not collide with (+) button, and plays "notification" role anyway.
* The `interface` debug scene was buggy. The problem was with one expression's span-tree. When I replaced it, the scene works.
* I've removed "new searcher" API, as it is completely outdated.
* I've changed code owners of integration tests to GUI team, as it is the team writing mostly the integration tests (int rust)
[Task link](#181181203).
This is a reincarnation of PR [3273](https://github.com/enso-org/enso/pull/3273).
The maximum zoom factor of Graph Editor is limited to 1.0x. It is not possible to zoom in from the default camera position.
Debug Mode (activated with `ctrl-shift-d` shortcut) allows to zoom up to 100.0x (the previous behavior of Graph Editor).
If you enable Debug Mode, then zoom in and disable Debug Mode - you won't see the immediate change of zoom factor back to 1.0x. But it will "jump" (with animation) back once you make a zoom in/out event with your controls.
Video:
https://user-images.githubusercontent.com/6566674/154037310-1d166737-353e-4ae6-aca1-f7840571ab16.mp4
# Important Notes
This is a reincarnation of PR [3273](https://github.com/enso-org/enso/pull/3273). There are two changes since that PR:
1. Fixed bug with GeoMap zooming described [here](https://github.com/enso-org/enso/pull/3290). This is done by restricting `ZoomEvent` API so that it will never contain `amount` which is equal to `0.0`.
2. A few refactoring changes from https://github.com/enso-org/enso/pull/3289 to simplify code a bit.
This change makes EnsoGL runtime stats be always collected, even when EnsoGL `Monitor` panel is not visible. Those stats are intended to be used in the future by a profiling framework.
**Performance impact:** Continuous collection of stats introduces an overhead of two Web Performance API `now()` calls in each frame of the main rendering loop, plus a small number of simple arithmetic calculations. This is assumed to be a negligible and acceptable overhead.
#### Visuals
A screenshot of the Monitor panel in full `ide` after applying the PR, taken in IDE built with `./run dist`:
<img width="991" alt="Screenshot 2022-02-14 at 16 11 42" src="https://user-images.githubusercontent.com/273837/153891378-8a2fb333-34ce-46ce-99df-7d796817310c.png">
A recording, also in IDE built with `./run dist`; note that FPS is impacted by the act of recording itself:
https://user-images.githubusercontent.com/273837/154104016-49a12e23-1210-4477-9743-ec1611e5b4ed.movhttps://www.pivotaltracker.com/story/show/181093601
# Important Notes
- Responsibility for controlling how `Stats` gathering and calculation is performed at various points in the main rendering loop was removed from `Monitor` - the `Monitor`'s purpose is only to display existing data, it should not influence how the data is collected.
- Two previously existing distinct `Monitor` structs were merged into one, to avoid confusion; after previous refactorings, the remaining `stats::Monitor` did not have much useful code anyway.
- In `stats` package, refactoring was done, to make `StatsData` a "dumb", data-only type, and to move the logic related to stats collection and frame tracking to other helper types.
[ci no changelog needed]
Fix the `scroll-area` example scene, so that a red circle inside the scroll area, and a gray rounded rectangle representing the background of the scroll area, are now both visible.
Previously, adding just a `Sprite` (instead of a corresponding `SpriteSystem`) to the scene resulted in the underlying `Symbol` not being added to a visible `Layer`. (Notably, `Sprite::display_object()` is not the same as `Sprite::symbol.display_object()`.)
https://www.pivotaltracker.com/story/show/180459079
This reverts commit e69e8078c3.
The removed code (stats aggregation and `stats` demo scene) will not be needed by the profiling framework, as discussed on chat.
(reverts changes introduced as part of https://www.pivotaltracker.com/story/show/181093920)
* profiling instrumentation
* Support native testing with mock impl of `mod js`
* Add benchmarks
* Wrapper: support methods.
* `#[profile]`: work in any context
* feature-gate lineno info that breaks IDE
* Support async; more docs; add perf analysis
* docs & formatting
This change adds utility code for calculating summaries from multiple samples (snapshots) of EnsoGL runtime stats values.
This internal feature is expected to be used by Enso IDE performance profiling tools, which are planned to be added in the near future.
https://www.pivotaltracker.com/story/show/181093920
A demo scene named `stats` was added, showcasing how to perform calculations using the new tools. Currently, the summary calculations in the scene work only when the EnsoGL stats Monitor Panel is visible; this is planned to be improved in a future task (https://www.pivotaltracker.com/story/show/181093601).
- Note: the stats aggregation code is intended to be later used in Enso IDE's main rendering loop, so it needs to have very good performance characteristics.
- Due to that, `Accumulator` was designed to only use simple addition arithmetic, and be constant-memory once created.
Fix EnsoGL runtime statistics collection and processing, so that all values in a single vertical slice of the Monitor Panel graph (accessible through `control-option-tilde` shortcut) represent stats for the same animation/rendering frame.
Before the change, for any vertical slice of the graph, the FPS value was shown for the previous (`i - 1`) rendering frame, whereas the other values were shown for the current (`i`) rendering frame.
The alignment of the stats will become even more important in the future, when the values will be included in more detailed profiling reports, which is planned.
The GUI that is impacted (if in a subtle way) by the changed code is the performance monitor panel, accessible with a `ctrl-option-tilde` keyboard shortcut in the IDE.
https://www.pivotaltracker.com/story/show/181140499
