Wrap big and commonly copied `Application` struct into `Rc` to avoid large structure sizes for all widgets.
The `Application` struct by itself takes 704 bytes, measured by `size_of::<Application>()`. This structure is very often directly copied into components and widgets. Most notably, the generic `Widget` struct contains it. There are also cases, where structs (especially various `Model`s) contain multiple other child widgets directly, and end up indirectly copying the application multiple times.
All of `Application` clones are logical references (via `CloneRef`), so wrapping it into extra `Rc` doesn't change semantics in any way, but makes all structs that clone it way smaller. This reduces the amount of `memcpy`s and overall volume of allocated memory.
Measurement of a few example structs:
Before change:
```
size_of Application: 704 B
size_of Scrollbar: 712 B
size_of Scrollbar Model: 1576 B
```
After change:
```
size_of Application: 4 B
size_of ApplicationData: 704 B
size_of Scrollbar: 12 B
size_of Scrollbar Model: 176 B
```
Ideally we would not need to clone application reference into each component, but that's out of scope of this PR since it requires a lot more effort.
When hovering the mouse pointer over the Marketplace button on the left bar of the Component Browser, show a caption informing that the Marketplace will be available soon.
https://www.pivotaltracker.com/story/show/182613789
#### Visuals
The video below demonstrates the caption shown when hovering the Marketplace button on the left bar of the Component Browser. It shows the caption disappearing after a hardcoded time, or when the mouse pointer is moved away from the button.
https://user-images.githubusercontent.com/273837/196195809-45a712e1-ad86-47d8-99ff-1475a0b74c6e.mov
# Important Notes
- The "Label" visual component was fixed. Previously, the width calculation of the background was not synchronized correctly with the text width. As a result, a zero-width background was displayed when a Label was shown for the first time.
This PR introduced an overhauled Component List Panel implementation, making use of the efficient EnsoGL grid view component. Also, it delivers a couple of new features:
* A part of the new design: there are no more section headers in grid, instead groups are "glued" together. The local scope section is under "popular" (old "favorites").
* The keyboard management inside grid works.
* there is a mouse hover highlight
* selecting the lowest entry in section when jumping with navigation bar.
* accepting input as-is with cmd/ctrl + Enter.
https://user-images.githubusercontent.com/3919101/194561890-fffb9b41-2f0d-4357-8d9a-5038a6bcb023.mp4
### Important Notes
**What is not implemented:**
* [Focus management between panels.](https://www.pivotaltracker.com/story/show/180872763) The grid is always focused. To accept the current input, use ctrl+Enter shortcut.
* [Proper handling of selection when having empty space on the right and pressing right arrow.](https://www.pivotaltracker.com/story/show/183487880)
* When entering a module, its name is not added to the input as described in the design doc. Will be a part of [this User Story](https://www.pivotaltracker.com/story/show/181058321).
**Known issues**
* [the selection, especially in the local scope section, has sometimes an undesirable offset](https://www.pivotaltracker.com/story/show/183487730). The cause is known, but not so easy to fix.
* The inserted nodes are often producing errors. The Browser's inherits the outdated understanding of the language from old Node Searcher, and it does not include new form of imports, static methods etc. Those all will be fixed as a part of [this User Story](https://www.pivotaltracker.com/story/show/181058321).
* The performance is improved, but still not ideal, due to problems in [text areas](https://www.pivotaltracker.com/story/show/183406745).
* To scroll the documentation panel, you must first click on it.
[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/182675703)
This PR implements the actual integration of the breadcrumbs panel with the component list panel. A special breadcrumbs controller (`controller::searcher::breadcrumbs`) is tracking the currently opened module with a list of its parents. The searcher presenter uses the API of the controller to sync the displayed list of breadcrumbs with the controller state.
https://user-images.githubusercontent.com/6566674/193064122-7d3fc4d6-9148-4ded-a73e-767ac9ac83f8.mp4
# Important Notes
- There is an `All` breadcrumb displayed at all times at the beginning of the list. It will be replaced with a section name as part of [Section Title on Component Browser's Breadcrumbs Panel](https://www.pivotaltracker.com/story/show/182610561) task.
- I changed the implementation of `project::main_module_id`, `project::QualifiedName::main_module`, and `API::main_module` so that they are logically connected which each other.
- I adjusted the Breadcrumbs View to avoid "appearance" animation glitches when opening new modules. `set_entries` was replaced with the `set_entries_from` endpoint.
When running the profiling run-graph and flamegraph demo scenes, if a profile file is not found in the directory served over http, fall back to generating demo data.
This PR disables the wasm-opt optimization in the crates that can be used as WASM entry points. Unfortunately, wasm-pack does not allow for disabling wasm-opt through a command line flag, so we have to disable it by setting an appropriate flag in each Cargo.toml.
When a GridView is navigated using the keyboard, scroll it to display the newly selected entry.
https://www.pivotaltracker.com/story/show/182593635
#### Visuals
See below for a video demonstrating automatic scrolling of the GridView when arrow keys are pressed on the keyboard. The first video below shows the default scrolling behavior in a GridView without headers.
Note:
- When the Grid View is scrolled, the mouse hover highlight moves away from the mouse position. This is not a new regression, the behavior is the same in the `develop` branch (e.g. when scrolling using the mouse).
https://user-images.githubusercontent.com/273837/190183984-91f7808c-3606-43f8-bcda-ac4d5f84e00f.mov
The video below shows the behavior in a GridView with headers when the GridView is first scrolled to its top-left corner. The following guidance from the Design Doc is enabled and showcased:
> Users can change the selected component by pressing the arrow keys. The Focus does not move up if it does not have to (in most cases, the focus is located in the second row from the bottom). Instead, the component list scrolls down if there are enough entries.
https://user-images.githubusercontent.com/273837/189151546-e50aaf22-6f4d-41cb-809f-60038305745f.mov
The next video shows the behavior in the same GridView as in the previous example when the GridView is first scrolled away from any of its boundary entries. Notably, scrolling happens only when the selection is moved using the keyboard arrow keys, not when changing the selection using the mouse. This behavior is based on a discussion with @wdanilo on Discord.
https://user-images.githubusercontent.com/273837/189151974-d992be93-f61f-4e9f-9f4c-dfe260bbec5b.mov
This PR contains an entry definition for Grid View to be used inside Component List Panel View. The Example grid view with the entry definition may be seen on new_component_list_panel_view debug scene.
https://user-images.githubusercontent.com/3919101/190663278-23c35ab0-f426-4001-8128-df7147aafb9e.mp4
# Important Notes
* The styling is not detailed yet due to time constraints (I want to move to integration this grid view to Component Panel List ASAP) and the fact that I could not get new mplus1 font working with text Area.
* Implementing this required adding a "contour offset" feature to the Grid View.
[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/181445628).
This PR implements a Breadcrumbs panel for the new component browser.
The Breadcrumbs is a horizontal list of text labels separated by a special icon and has an optional ellipsis icon at the end.
It is implemented using the new GridView component.
Video:
Demo of adding new breadcrumbs, scrolling behavior, and selecting breadcrumbs with the mouse.
https://user-images.githubusercontent.com/6566674/189199432-77807cef-00dc-4abe-b95c-b17a536f59f6.mp4
Demo of selecting breadcrumbs with keyboard shortcuts:
https://user-images.githubusercontent.com/6566674/189199603-53e55335-73ba-4ed7-8291-4455144c06aa.mp4
# Important Notes
- This PR implements an old interaction of the design of the component browser. The new design of the breadcrumbs can not be easily integrated into the current look of the component browser, so we would need to update styles later. It should be a relatively simple task. *The implementation uses color from the new design though. (but not fonts and sizes)*
- I found a bug in the grid view implementation that causes panics at runtime in some conditions. The reason is triggering FRP endpoints while constructing new entries. This issue is fixed in the PR.
Add support for moving the selection in a Grid View using the keyboard.
https://www.pivotaltracker.com/story/show/182585789
#### Visuals
See below for videos showcasing GridView selection keyboard navigation in the `grid_view` debug scene. In the videos, messages in the Developer Console can be observed. When a keypress would result in the selection being moved out of the GridView, the selection is not moved and a message is emitted in the Developer Console instead, showcasing an FRP output signal emitted on such event. Please note that the videos are recorded with the tracing level changed to `DEBUG`. In a default build, the tracing level is set to `WARN`, and the messages visible in the videos are not displayed in the Developer Console.
https://user-images.githubusercontent.com/273837/188483972-89d79f7b-1303-457b-869f-282e0809a755.movhttps://user-images.githubusercontent.com/273837/188484294-e9b6461c-a84f-4817-9447-d792f2ebdbb5.mov
The following video shows moving the selection between "regular" entries and header entries. It also shows a current usability limitation of the selection keyboard navigation feature, such that the Grid is not scrolled when the selection leaves the visible part of the Grid, and the selection may thus disappear from view.
https://user-images.githubusercontent.com/273837/188485238-29a82b27-de2f-4cf8-a2e7-ff8c3f41478d.mov
# Important Notes
- Keyboard navigation only works when a GridView has focus.
- Selection keyboard navigation only works if the selection was already set to some entry beforehand.
- If keyboard navigation would move selection outside of the grid, the selection movement is canceled and an FRP event is emitted.
[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/182955595)
This PR implements variable column widths in the new Grid View component. We need this feature to quickly implement various parts of the UI, including the breadcrumbs panel of the component browser.
There are two ways to change the width of the specific column:
1. "From the outside", using the `set_column_width` endpoint of the Grid View
2. "From the inside", using the `override_column_width` endpoint of the EntryFrp.
Both ways work similarly, but the latter is helpful for our breadcrumbs implementation, as it allows for entry to decide on the width of the column by its content.
See the screencast with three grid views. The top-left one has every even column shrunk by GridView API. Every grid view has a second column extended by EntryFrp API.
https://user-images.githubusercontent.com/6566674/185060985-7b7df076-c659-41fa-977a-22875493f8d4.mp4
[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/181870555)
This PR changes the relative position of the edited node in such a way that it is left-aligned to the component browser window. This change reflects the most recent version of the [design doc](https://github.com/enso-org/design/blob/main/epics/component-browser/design.md#overview)
<img width="1157" alt="Screenshot 2022-08-08 at 19 15 47" src="https://user-images.githubusercontent.com/6566674/183454192-81960e0a-ab69-43a4-b7df-d13320a9d16d.png">
As an additional change, the FRP implementation of the `Camera2d` was extended with a new output (screen dimensions) and fixed. With the old implementation, there was a possibility of panic at runtime because of non-exclusive borrows of `RefCell`. The FRP event for camera position was emited inside the scope with a mutable `RefCell` borrow. Any attempt to borrow the camera one more time (e.g., by calling one of the getters, such as `zoom()`) caused panic at runtime.
This PR adds a new variant of selection, where the mouse-hovered entry is highlighted and may be selected by clicking.
In the video below, we have three grid views with slightly different settings:
* In the left-top corner, both hover and selection highlight is just a shape under the label. Such a grid view does not require additional layers (when compared to non-selectable grid view).
* In the left-bottom corner the hover is normal shape, but selection is a _masked layer_ which allows us to have different text color. This setting requires three more layers to render.
* In the right-top corner, both hover and selection are displayed in the masked layer, creating 6 additional layers.
https://user-images.githubusercontent.com/3919101/181514178-f243bfeb-f2dd-4507-adc3-5344ae0579b7.mp4
**Note**: This PR also contains content of previous Grid View PR. We decided to discard the previous, because this one did some refactoring of old one, and it's not a big addition.
Added a scrollable::GridView component, which just embeds the GridView in ScrollArea. Also, re-worked the idea of text layers.
https://user-images.githubusercontent.com/3919101/179020359-512ee127-c333-4f86-bff5-f1cb4154e03c.mp4
This PR contains all work for finishing integration of first Component List Panel in the IDE:
* It adds a stub for the whole Component Browser View. The documentation panel is re-used from the old searcher.
* It has the presenter implementation, integrating the view with Hierarchical Component List from the controller.
* It extends the View API, so the integration is possible, making use of Component Group Set wrapper.
* The selection integration was also merged into this PR, because it depended on the API extension mentioned above. However, we should avoid such practice in the future.
https://user-images.githubusercontent.com/3919101/177816427-8c4285b4-8941-4048-a400-52f4acf77a9f.mp4
# Important Notes
There are some known issues, to-be-fixed in the future.
* The performance is bad. It should be improved with new text::Area, and the decent one shall come with [GridView inside component browser](https://www.pivotaltracker.com/story/show/182561072)
* There is no keyboard navigation. It should also be delivered with [GridView](https://www.pivotaltracker.com/story/show/182561072).
* The Favorites section is not [filtered out by node source type](https://www.pivotaltracker.com/story/show/182661634).
If a node created by the user gets placed off-screen, the screen's camera is panned to make the node visible.
https://www.pivotaltracker.com/story/show/181188687
#### Visuals
A screencast showing a number of node creation scenarios when the camera is panned to the newly created node, including when zoomed out.
https://user-images.githubusercontent.com/273837/177169716-50a12b0a-c742-4b01-9766-56206e7938b9.mov
# Important Notes
- Camera is panned also if the node is only partially visible, or if there's not enough free space visible around the node. The specific amount of free space that needs to be visible around a newly created node is configured in the theme.
- If the screen area is so small that the node cannot be fully fit in it (either horizontally or vertically), showing the left and top boundaries of the node's area takes priority over showing the corresponding opposite edges.
Implement simple placeholder icons for all entry kinds supported in the Suggestion Database. The icons are planned to be used in Component Browser as default icons for entries. This is intended to allow visually distinguishing different entry kinds.
The following additional fixes and tweaks are applied:
- Icons previously using only 1 color from the theme now use the color provided through shape parameters instead.
- The `data_science` and `network` icons now use only the 2 colors provided through shape parameters.
- The `join` icon has its shape and colors modified and uses only the 2 colors provided through shape parameters.
- The demo scene now parametrizes icon shapes using colors from the Component Browser Design Doc.
https://www.pivotaltracker.com/story/show/182584322
#### Visuals
Original contents of the demo scene before the PR:
<img width="2197" alt="x-orig" src="https://user-images.githubusercontent.com/273837/176669422-ee2e14c7-9ef4-42fd-acb7-ae3be6b68587.png">
Final contents of the demo scene after the PR:
<img width="2201" alt="x2-final" src="https://user-images.githubusercontent.com/273837/176668720-6f1685fd-f7e6-44d7-85f5-f6a6d6789644.png">
[Task link](https://www.pivotaltracker.com/story/show/182194574).
[ci no changelog needed]
This PR implements a new selection box that will replace an old (not really working) one in the component browser. The old selection box wasn't working well with the headers of the component groups, so we were forced to make a much harder implementation.
The new implementation duplicates some visual components and places them in a separate layer. Then, a rectangular mask cuts off everything that is not "selected". This way:
- We have more control over what the selected entries should look like.
- We can easily support the multi-layer structure of the component groups with headers.
- We avoid problems with nested masks that our renderer doesn't support at the moment.
To be more precise, we duplicate the following:
- Background of the component group becomes the "fill" of the selection.
- Entries text and icons - we can alter them easily.
- Header background and header text. By placing them in separate scene layers we ensure correct rendering order.
https://user-images.githubusercontent.com/6566674/173657899-1067f538-4329-44f9-9dc2-78c8a4708b5a.mp4
# Important Notes
- This PR implements the base of our future selection mechanism, selecting entries with a mouse and keyboard still has several issues that will be fixed in the future tasks.
- The scrolling behavior will also be improved in future tasks. Right we only restrict the selection box position so that it never leaves the borders of the component group.
- I added a new function to `add` shapes to new layers in a non-exclusive way (we had only `add_exclusive`) before. I have no idea how we didn't use this feature before even though we mention it a lot in the docs.
- The demo scene restricts the position of the selection box for one-column component groups but does not for the wide component group.
Remove a `Symbol`from the `SymbolRegistry` when its `SpriteSystem` is dropped.
This fixes the remaining buffer leak (after #3504) in https://www.pivotaltracker.com/story/show/181943457
# Important Notes
- The `SymbolRegistry` now assigns unique `SymbolId`s, so that we can tell if a `SymbolId` refers to a `Symbol` that has already been unregistered (this shouldn't happen, but it's not statically-obvious that it doesn't, so if it occurs we shouldn't misbehave).
- Also fix a bug in how `buffer_count` was tracked (we were decrementing more than incrementing!).
[ci no changelog needed]
This PR implements a new helper for the future Component Browser - `component_group::multi::Wrapper`. It propagates FRP events from multiple component groups and ensures that only a single component group is focused at all times.
See the updated component group demo scene (console logs shows propagated FRP events from all component groups):
https://user-images.githubusercontent.com/6566674/172359141-8ea6f1ba-e357-4c1b-852a-adb4d5207e03.mp4
- Fixed a `define_endpoints_2!` macro. FRP endpoints for `focus` events weren't connected properly.
- List View now uses an overlay shape to catch mouse events, it allows much easier implementation of `is_header_selected` in the component group.
This PR introduces a new structure delivered by Searcher Controller: The Component List.
The Component list is hierarchical, and its structure reflects how the components are displayed in Component Browser - only "submodule" section at this point, other sections will be covered in next tasks.
This does not introduce anything visual; the structures are tested in unit tests.
Define some workflows for batch-mode profiling.
Implemented:
- collapse nodes
- create node
- enter collapsed node
- new project
- open visualization
They can currently be built and run with a command like:
`./run.sh ide build --profiling-level=debug && dist/ide/linux-unpacked/enso --entry-point profile --workflow create_node --save-profile out.json`
And the data can be displayed with:
`dist/ide/linux-unpacked/enso --entry-point profiling_run_graph --load-profile out.json`
Demo of recording and viewing a profile with a command-line one-liner:
https://user-images.githubusercontent.com/1047859/169954795-2d9520ca-84f9-45d2-b83a-5063ebe6f718.mp4
See: https://www.pivotaltracker.com/story/show/182195399.
# Important Notes
- When defining workflows, two helpers are enough to allow us to tell when the action is really done: `Fixture::compile_new_shaders`, and `Fixture::backend_execution`. Often, it is appropriate to await both, but it depends on the task.
- The shader compiler is now driven by a `Controller`; while the `Compiler` is reset if context is lost, the `Controller`'s state survives context loss.
- A new `--load-profile` option supports specifying a profile by path when running `profiling_run_graph`.
- Drop the `with_same_start` profiler interface; we ended up preferring a child profiler convention, and this interface was not implemented compatibly with the stricter data model we've had since the introduction of `profiler::data`.
- Fix the noisy `rustfmt` output.
There are two dirty flags in layers: depth_order_dirty and element_depth_order_dirty - one marking changed in Layer, second marking change in one of sublayers. The depth_order_dirty has a proper callback for setting element_depth_order_dirty of its parent. However, the latter did not propagate up.
I fixed it by adding callback for element_depth_order_dirty which sets the depth_order_dirty of the parent.
# Important Notes
* The question to @wdanilo : is it possible, that I can propagate dirty directly to element_depth_order_dirty, without setting depth_order_dirty? As far as I understand the code, it would also work (and we would omit some unnecessary updates).
* I tried to leave some logs, but I don't feel how to do that: the tooling I used was very specific, only the concrete ids of symbols and layers were logged, and I don't know how to generalize it.
This PR extends the Component Group Entry with icon and option to highlight the text. Here the convert has highlighted "con".
https://user-images.githubusercontent.com/3919101/169046537-4f8b823c-322e-40dc-8abb-24d1d7092341.mp4
### Important Notes
Although this PR includes effort for adjusting Component Group style to better reflect the design, it is not entirely finished: the selection still works badly and will be fixed in another PR.
[ci no changelog needed]
[Task link](https://www.pivotaltracker.com/story/show/181725003)
This PR implements a fully visible component group header while scrolling the group (using the ScrollArea).
The header moves in sync with scrolling movements (using new `set_header_pos` FRP input), so it looks like the component group is scrolled. ScrollArea masks the "scrolled" entries above the header. This design allows a fully visible header even though our renderer doesn't support nested layers masking yet.
The screencast:
https://user-images.githubusercontent.com/6566674/168320360-2c2017b2-0ef5-42ce-9c79-82b9641c1d73.mp4
The most recent one, with the updated demo scene from develop:
https://user-images.githubusercontent.com/6566674/168555268-8552c4b0-f887-4388-89a1-e65ddf668be6.mp4
# Important Notes
- I fixed the API of the list view so now it supports non-hardcoded scene layers (previously it did not). I also believe it was implemented incorrectly.
- I've found a [pretty weird bug](https://www.pivotaltracker.com/story/show/182193824): the component group inside the ScrollArea is invisible unless I add some arbitrary shape to the scroll area content. I use a `transparent_circle` for this purpose in the demo scene. The bug is probably related to masking the sublayers, though I wasn't able to reproduce it properly on a simpler example.
- The selection box is removed from the demo scene as agreed with @farmaazon . The correct implementation has proven to be much harder than I expected, and we will implement another approach in a separate PR.
- I also modified the `shadow::Parameters` so that it uses `Var`s instead of plain values.
* Extends the instrumentation of the code base and upgrades some FRPs to the newer API macro.
* Extends the run-graph demo scene to specify a profile via URL without recompilation.
* Fixes labels in the flame graph demo scene.
* Fixes an issue with loading profiles that contains escaped characters.
# Important Notes
* no longer contains the upgrade of the `text::View` to `define_endpoints_2`. This should be fixed as part of the text rendering rewrite.
[ci no changelog needed]
Parametrize the colors used in a Component Group view based on a single color passed to an FRP input.
Customizing the colors of a Component Group will be needed for the larger Component Group List panel. This customization will work as a visual hint for the User, helping them to distinguish different Component Groups in the panel. A single input color will be configured for every Component Group in the `package.yaml` file (see the Design Doc). Therefore, all shades of the color required by the Component Group view must be calculated from this single input color.
https://www.pivotaltracker.com/story/show/181725039
#### Visuals
The following screencast of the `component_group` debug scene shows how all required shades of color are calculated from a single input color. It also shows a new "dimmed" display mode of the Component Group. The debug scene does not support selecting entries in a "dimmed" Component Group, as this is not required by the Design Doc.
https://user-images.githubusercontent.com/273837/168074651-bf3d5ea5-99b0-4b69-9934-ad8565ffc54e.mov
The following is a screenshot of the Node Searcher, to demonstrate that it still works correctly:
<img width="623" alt="Screenshot 2022-05-09 at 17 13 01" src="https://user-images.githubusercontent.com/273837/167441109-e9a47b5a-45a2-4172-85ed-c593e43e02d6.png">
# Important Notes
- A new type `Params` was added in the `list_view::entry::Entry` trait. This was needed to allow passing FRP information to entries separately for every ListView instance.
- Note: `style_prefix` and `max_width_px` parameters of the `list_view::entry::Entry::new` function may get moved into the new `Params` type in the future. To save time, this was not attempted in this PR, as agreed with @farmaazon.
[ci no changelog needed]
