close#7604
After moving the rename action to the dashboard, IDE is unaware of the new project name. PR implements a new `refactoring/projectRenamed` notification that is sent from the server to clients and informs them about the changed project name.
# Important Notes
https://github.com/enso-org/enso/assets/357683/7c62726d-217e-4e69-8e48-568e0b7b8c34
We can't really control the timing of file watcher events, which sometimes leads to failures of VCS tests. The PR disables the file watcher in the `VcsManagerTest` suite to make tests more stable.
Changelog:
- add: a `Watcher` and `WatcherFactory` interfaces
- add: a `NoopWatcher` test watcher
- update: disable the file watcher in the `VcsManagerTest` suite
part of #7178
Changelog:
- add: `text/fileModifiedOnDisk` notification
- update: during the auto-save, check if the file is modified on disk and send the notification. I.e. auto-save does not overwrite the file if it was changed on disk (but the save command does)
- update: IDE handles the file-modified-on-disk notification and reloads the module from disk
# Important Notes
Currently, the auto-save (and the check that the file is modified on disk) is triggered only after the file was edited. The proper check (using the file-watcher service) will be added in the next PR
https://github.com/enso-org/enso/assets/357683/ff91f3e6-2f7a-4c01-a745-98cb140e1964
As discovered in #7224, Json RPC protocol was added to the asynchronous resource initialization stage, as part of #6306, but was not in fact initialized at that point.
Instead it was initialized when the server was started to be able to serve correctly the initialization messages. A classic Catch-22. It was really hard to discover this just by looking at the code, but the profiling clearly showed where the time was spent.
This change splits Language Server's protocol into two:
- the first one accepts `heartbeat/init` and `session/initProtocolConnection`
- the second one enriches it with the full set of supported messages
This shifts the initialization from blocking for 0.5 sec to only ~30ms, and performing the second stage asynchronously.
Closes#7224.
# Important Notes
Before the change (blocking server startup):
After the change (1st stage):
After the change (2nd, asynchronous initialization, stage):
Package's config information, once loaded, never changed. While there is typically no need for it, this was problematic when the config became out-of-sync with the filesystem, like in the case of project rename action.
In rename, the config's properties would be updated in the FS, but that would never be reflected in module's package. Therefore further compilations would continue to ask for the old namespace.
Most of the changes are cosmetic (s/`.config`/`.getConfig()`) except for the new `reloadConfig` method on `Package` that is being called in `RenameProjectCmd` handler.
Closes#7062.
# Important Notes
The reported `ExecutionFailed` error should have been mostly fixed already via #7143. This change makes sure that all the related warnings are gone as well and the compiler uses the updated namespace.
`executionFailed` instead is sent when an evaulation finishes with a a critical failure or a non-critical error.
The PR tries to miniminally modify the change in the messages exchange so as to avoid a major redesign at this point.
Closes#7002.
# Important Notes
Unblocks IDE which will need to modify to this new setup.
Fixes#6955 by:
- using `visualisationModule` to specify the module where the visualization is to be used
- referring to method in `Meta.get_annotation` with `.method_name` - e.g. unresolved symbol notation
- evaluating arguments to `Meta.get_annotation` in the context of the user module (which can access the extension functions)
Request Timeouts started plaguing IDE due to numerous `executionContext/***Visualization` requests. While caused by a bug they revealed a bigger problem in the Language Server when serving large amounts of requests:
1) Long and short lived jobs are fighting for various locks. Lock contention leads to some jobs waiting for a longer than desired leading to unexpected request timeouts. Increasing timeout value is just delaying the problem.
2) Requests coming from IDE are served almost instantly and handled by various commands. Commands can issue further jobs that serve request. We apparently have and always had a single-thread thread pool for serving such jobs, leading to immediate thread starvation.
Both reasons increase the chances of Request Timeouts when dealing with a large number of requests. For 2) I noticed that while we used to set the `enso-runtime-server.jobParallelism` option descriptor key to some machine-dependent value (most likely > 1), the value set would **only** be available for instrumentation. `JobExecutionEngine` where it is actually used would always get the default, i.e. a single-threaded ThreadPool. This means that this option descriptor was simply misused since its introduction. Moved that option to runtime options so that it can be set and retrieved during normal operation.
Adding parallelism intensified problem 1), because now we could execute multiple jobs and they would compete for resources. It also revealed a scenario for a yet another deadlock scenario, due to invalid order of lock acquisition. See `ExecuteJob` vs `UpsertVisualisationJob` order for details.
Still, a number of requests would continue to randomly timeout due to lock contention. It became apparent that
`Attach/Modify/Detach-VisualisationCmd` should not wait until a triggered `UpsertVisualisationJob` sends a response to the client; long and short lived jobs will always compete for resources and we cannot guarantee that they will not timeout that way. That is why the response is sent immediately from the command handler and not from the job executed after it.
This brings another problematic scenario:
1. `AttachVisualisationCmd` is executed, response sent to the client, `UpsertVisualisationJob` scheduled.
2. In the meantime `ModifyVisualisationCmd` comes and fails; command cannot find the visualization that will only be added by `UpsertVisualisationJob`, which might have not yet been scheduled to run.
Remedied that by checking visualisation-related jobs that are still in progress. It also allowed for cancelling jobs which results wouldn't be used anyway (`ModifyVisualisationCmd` sends its own `UpsertVisualisationJob`). This is not a theoretical scenario, it happened frequently on IDE startup.
This change does not fully solve the rather problematic setup of numerous locks, which are requested by short and long lived jobs. A better design should still be investigated. But it significantly reduces the chances of Request Timeouts which IDE had to deal with.
With this change I haven't been able to experience Request Timeouts for relatively modest projects anymore.
I added the possibility of logging wait times for locks to better investigate further problems.
Closes#7005
close#6936
Changelog:
- add: new suggestion type Getter that is not exposed to the api
- update: do not return suggestion of type getter when doing a global search (without specifying self types)
Private suggestions and modules mentioned in the issue will be filtered out after we finish the work on the new (refined) exports algorithm.
# Important Notes
close#6800
Update the `executionContext/expressionUpdates` notification and send the list of not applied arguments in addition to the method pointer.
# Important Notes
IDE is updated to support the new API.
The change adds an additional field to `ExpressionUpdates` messages sent by `ProgramExecutionSupport` to indicate if the type of value (or its method pointer) has changed and therefore would potentially require a suggestions' update.
Prior to #3729 that check was done during the instrumentation. However we still want to continue to support "pending expression" functionality therefore `SuggestionsHandler` will use the additional information to filter only the required expression updates.
Most of the changes are related to adapting our tests to the new field.
Closes#6706.
# Important Notes
The associated project now loads and navigates smoothly.
Also attaching a screenshot from the project that illustrates that pending functionality continues to work:
[Kazam_screencast_00006.webm](https://github.com/enso-org/enso/assets/292128/35918841-f84f-4e1c-b1b0-40e45d97e111)
Artifically limiting the number of reported warnings to 100. Also added benchmarks with random Ints to investigate perf issues when dealing with warnings (future task).
Ideally we would have a custom set-like collection that allows us internally to specify a maximal number of elements. But `EnsoHashMap` (and potentially `EnsoSet`) are still WIP when it comes to being PE-friendly.
The change also allows for checking if the limit for the number of reported warnings has been reached. It will visualize by adding an additional "Warnings limit reached." to the visualization.
The limit is configurable via `--warnings-limit` parameter to `run`.
Closes#6283.
Dead Letter logging is occasionally flooding our logs which is confusing to users reporting bugs. Left the possibility of a single report so that we know that something is happening.
During initialization JGit may attempt to resolve hostname. On some systems this can take more than desired triggering timeouts. This change does two things:
- sets the default committer for changes, lack of which probably triggered the check
- sets the default hostname to `localhost` (we don't care), in case something else in JGit still wants to resolve hostname
Closes#6447.
# Important Notes
I wasn't able to reproduce this so relying on @mwu-tow since apparently he can repro it reliably.
close#6306
Changelog:
- add: `AsyncResourceInitialization` component
- update: initialize language server resources asynchronously
# Important Notes
Speeds up `session/InitProtocolConnection` request by ~300ms (~10%) 3051ms (before) vs 2740ms (after) on my machine.
close#6232
Changelog:
- remove: `SqlVersionsRepo`
- update: `SuggestionsDatabaseModuleUpdateNotification` message removing the version
- update: cleanup versions repo usages in the language server
close#6080
Changelog
- add: implement `SuggestionsRepo.insertAll` as a batch SQL insert
- update: `search/getSuggestionsDatabase` returns empty suggestions. Currently, the method is only used at startup and returns the empty response anyway because the libs are not loaded at that point.
- update: serialize only global (defined in the module scope) suggestions during the distribution building. There's no sense in storing the local library suggestions.
- update: sqlite dependency
- remove: unused methods from `SuggestionsRepo`
- remove: Arguments table
# Important Notes
Speeds up libraries loading by ~1 second.
close#6139close#6137
When the project is renamed, the engine cleans up affected modules and initiates modules re-indexing to fill the suggestions database with new records. This way it reduces the amount of information stored in the suggestions database and helps implement #6080 optimization.
Changelog:
- remove: rename features from the suggestions database
- update: rename command to initiate modules cleanup and project re-execution
- fix: #6137
It is sometimes impossible to figure out the real reason for invalid text edit request. Added a bit of context to failures to narrow down the cause of the failure.
# Important Notes
Should help with diagnosing issues like #6099.
close#5874
Changelog:
- add: `isStatic` parameter to `search/completion` request to search by the `static` suggestion attribute
- update: search non-static suggestions when opening component browser
# Important Notes
Component browser doesn't show `Table.new` and `Table.from_rows` suggestions when a `Table` node is selected.
close#5881
Changelog
- add: ProtocolFactory object that initializes and returns the protocol object
- update: Add protocol initialization to the initialization component
close#5911
In interactive mode, perform writing IR caches in the background jobs queue. Background jobs execution is delayed until the first execution is complete.
The `logAvailableComponentsForDebugging` will check and install all necessary components of GraalVM for every mentioned version. While not harmful, it adds up to startup time.
Additionally added an option in language server startup to skip installation of GraalVM components. The latter is already performed by project-manager when opening the project and it is unnecessary to do it twice. Due to LS' architecture this configuration has to be passed around via multiple configs.
Finally, skipped the attempt to install Python component on Windows - this is not supported by GraalVM atm.
Closes#5749.
# Important Notes
The impact of this problem could be really felt the more versions of Enso and GraalVM one had since it would go through all of them.
Implement new Enso documentation parser; remove old Scala Enso parser.
Performance: Total time parsing documentation is now ~2ms.
# Important Notes
- Doc parsing is now done only in the frontend.
- Some engine tests had never been switched to the new parser. We should investigate tests that don't pass after the switch: #5894.
- The option to run the old searcher has been removed, as it is obsolete and was already broken before this (see #5909).
- Some interfaces used only by the old searcher have been removed.
close#5892
Changelog:
add: feature to delay background jobs execution
add: start background jobs when program finishes
add: start background jobs on `search/completion` request
close#5070
Changelog:
- Include the original exception to log expressions
- Enable logging of Akka Actors' lifecycle events on debug logging level
- Decrease the severity of interruption log messages because interruptions are part of the workflow. The computation can be interrupted at any time, and still be recomputed after. Warnings are just misleading in this case.
This change adds serialization and deserialization of library bindings.
In order to be functional, one needs to first generate IR and
serialize bindings using `--compiled <path-to-library>` command. The bindings
will be stored under the library with `.bindings` suffix.
Bindings are being generated during `buildEngineDistribution` task, thus not
requiring any extra steps.
When resolving import/exports the compiler will first try to load
module's bindings from cache. If successful, it will not schedule its
imports/exports for immediate compilation, as we always did, but use the
bindings info to infer the dependent modules.
The current change does not make any optimizations when it comes to
compiling the modules, yet. It only delays the actual
compilation/loading IR from cache so that it can be done in bulk.
Further optimizations will come from this opportunity such as parallel
loading of caches or lazily inferring only the necessary modules.
Part of https://github.com/enso-org/enso/issues/5568 work.
