- Adds execution control to `Table.write`.
- Refactored the `Text.write` to make part reusable.
- Tidied up some legacy mess in tests.
- Add easier flow to go from `Text` to an `URI` to fetching data.
- Add decode functions to `Response` and `Response_Body`.
- Fix issue with 0 length regex matches (using same as Python and .Net approach).
- Add various ALIAS entries to make function discovery easier.
- Sort a lot of drop down and vector editors out (including switch to fully qualified names).
Now, quick typing in component browser and pressing "enter" should not cut off the last part typed. Fixes#6733https://github.com/enso-org/enso/assets/3919101/3979ed5a-ba4e-4e25-93e6-672e731b7bd8
On this occasion, also fixed "go-to-dashboard" button and "Unsupported engine version" being over the full-screen visualization. Fixes#6722
# Important Notes
I did a significant refactoring of Project View:
1. The huge `frp::extend` block was split into multiple `init` methods.
2. Remaining of the "Old searcher" were removed.
3. The "Edited" event from node's input is emitted only when in edit mode (it's consistent with other API terminology, and makes FRP for showing CB much simpler.
The code was _mostly_ moved around, but the check is advised anyway, as there were small changes here and there.
close#6800
Update the `executionContext/expressionUpdates` notification and send the list of not applied arguments in addition to the method pointer.
# Important Notes
IDE is updated to support the new API.
Implements #6792Fixes#6715Fixes#6052Fixes#5689
The dynamic dropdown widgets entries now can specify additional widget configuration as a list of `parameters` of the inner method call. That allows for creating smarter widgets within nested constructors, taking the outer widget's context into account.
<img width="772" alt="image" src="https://github.com/enso-org/enso/assets/919491/97c70654-9170-4cf0-ae4d-2c25c74caa96">
With the changes to the serialization logic, I have also adressed issues related to automatic label generation for both static and dynamic dropdown entries. For access chains (e.g. `Foo.Bar.Baz_Qux`), the label will now always contain only the last segment, and all underscores will be removed (e.g. `Baz Qux`). This also applies to dynamic entries where the label is not explicitly specified in method annotation.
<img width="265" alt="image" src="https://github.com/enso-org/enso/assets/919491/1abe6c77-010b-4622-b252-97cd1543cb48">
Additionaly, now the dynamic entries containing constructors will also be resolved within suggestion database, allowing us to automatically insert relevant import, shorten the actually used expression and wrap it with parentheses if required. That was required for nested widgets to show up, as we depend on properly resolved argument names to show them. The widget definitions in annotations no longer need to wrap the expressions manually. Instead, the constructors used in dropdown entries should be specified using fully qualified names, similarly to how we do it in tag values.
CC @jdunkerley - The dropdown entries containing just a constructor will no longer need added parentheses around them. Instead, the constructors should be specified using fully qualified names, similarly to how we do it in tag values.
<img width="389" alt="image" src="https://github.com/enso-org/enso/assets/919491/19944b5b-d0c7-43ac-bf17-ca1556e0b3f0">
Note that currently the import resolution is attempted even if the used constructor is is not specified using a fully qualified name. To accomplish that, the IDE is performing a more expensive search through whole suggestion database for matching type and module (e.g. in example above, we are searching for a match for `Aggregate_Column.First`). If there are multiple potential matches due to a name collision, it is undefined which one would be preferred. Effectively one will be picked at random. To avoid that, the libraries should over time transition to using fully qualified names wherever possible.
# Important Notes
I have removed the `payload` field from the span tree, and with it the generic argument on its nodes. This was already partially done on the branch with new design, on which I also had a few changes that turned out to be useful for this PR. So I pulled it in as well. It is a nice simplification that will ease our further work on removing the span-tree altogether. The biggest impact it had was on the node output port, where I had to store the port data outside of the span tree. This is the approach we would be taking when transitioning to AST anyway.
This is a fix for a couple of recent regressions:
- Fixes#6756: Projects couldn't be renamed anymore from within the project view.
- Fixes#6804: One could no longer switch between projects from within the project view.
- It also unblocks the issue with the spinner (that got reverted), but that probably needs some extra attention.
It might be the long-term goal to have different UX solutions to these cases, but this should fix those regressions in the short term at least.
Thanks to @somebody1234 for the in-depth conversation (and the actual code!).
Fixes#6736Fixes#6486Fixes#6601
To achieve goal mentioned in the title the following changes were made:
1. Now it's normal state of Component Browser to have no entry selected. In that case pressing enter will accept the input as-is.
2. The issues of `Column.from_vector` or actually any code being unintentionally inserted should be resolved, as in most of those scenarios we do not select any item in CB after list reload. Specifically, the first element is selected only when:
* the input is empty (so the user just starts writing code)
* or we filter by some pattern (we select the best match). This includes writing literal.
3. On this occasion, inserting literal was fixed, so no more random spaces are inserted inside.
4. Also, the entries in groups other than local group are reversed: now the entries specified as first in "component groups" section in the library will be easily approachable. In particular, now "Text input" is selected by default in empty node instead of `Column.from_vector`.
https://github.com/enso-org/enso/assets/3919101/42064b08-16b4-4519-81de-8a2d3701c112
Empty edition (null value) was parsed as NaN, which was confusing. This change correctly detects the case before trying different fallback mechanisms.
Addresses invalid warning mentioned in #6806.
Only invalidate the graph editor view at most once per frame. On develop, this saves about 70ms (2%). Testing a recent backend without #6755 as a stress-test, this saves about 5s (45%). This reflects better scalability to large numbers of `SuggestionUpdate` messages.
Fixes#6630.
# Important Notes
- Also fix intermittent profiling failures occurring since the introduction of microtasks.
Throwing `TailCallException` meant that exceptions that were extracted from the expression before the call was made could not be appended. This change catches the `TailCallException`, adds warnings to it and propagates it further, thus ensuring that we don't loose the information.
Closes#6765.
# Important Notes
Removed workarounds introduced in stdlib.
* Remove unused code: project management in component browser
* Encapsulate internal FRP logic of project list
* Collapse some code paths
* Open project passed on command line through presenter
A project name or ID that is passed on the command line was initialised
in the controller setup, before the presenters and views are set up.
Now, we fully initialise the IDE before opening a project so we have
control over the view while a project is being opened.
* Show a spinner in all cases of opening a project
* Let root presenter open/close projects when switching projects
* Change spinner to make progress over a fixed period
* Resolve issues when Project Manager API isn't available
* Bump wasm size limit
Re-introduce a feature that was removed with #6638: only initialize visualization choosers when they are visible. This avoids initializing lots of invisible UI elements at the same time when opening a project.
Fixes#6754. The issue mentions being able to create and delete nodes when the full-screen visualisation is active. Besides those, you now also can't:
- collapse nodes into a function
- enter a function
- exit a function
- Handles the `show-dashboard` event to hide the IDE and show the dashboard
- This replaces the temporary Ctrl+Alt+D shortcut to do the same action. The Ctrl+Alt+D shortcut has been removed.
# Important Notes
None
Fixes some of #6662
Issues addressed:
- `ide watch` and `gui watch` should now use the desktop platform
- error screen should now be shown when passing invalid options
- password (both creating password when registering, and resetting password) should now warn on invalid input
# Important Notes
Instead of checking whether `location.hostname === 'localhost'`, I've opted to use a constant defined by the build tool instead. This is to make it easier to merge the cloud IDE and desktop IDE entrypoints in the future, since it would be able to simply set `platform: Platform.cloud` in the build config.
Should fix [cloud-v2#464](https://github.com/enso-org/cloud-v2/issues/464).
# Important Notes
I'm not 100% clear on how to repro the issue so i'm partly just guessing the root cause.
I have eliminated various other things from being potential causes though - e.g. `localStorage` indicates that the AWS libraries are clearing their entries as expected.
* Fix cloud-v2/#432
* Delay setting backend to local backend; don't list directory if user is not enabled
* Add a way to debug specific dashboard paths
* Fix bug
* Check resources and status immediately
Fixes#6787
# Important Notes
I can't get Project Manager compilation to work locally so I guess I'll be relying on CI to verify that it's working correctly?
Of course, QA should be able to catch any problems too - the websocket API hasn't been changed so it should work out of the box with the current dashboard.
Refactored the logic behind selecting appropriate widgets for span tree nodes. Now the bulk of it is moved into widget methods. When a given widget type is reporting to be not compatible with the expression, it will not be used even if the configuration was overriden using an method argument annotation. In that case, the usual logic for automatically selecting the appropriate widget will kick in.
* Run typecheck and eslint on Lint CI
* Address reviews; fix type errors in `.d.ts` files
* Remove unused parameter
* Run prettier
* Fix lint error
---------
Co-authored-by: Paweł Buchowski <pawel.buchowski@enso.org>
* Disable cloud backend for unverified users
* Use local backend as default backend
* Try to fix Project Manager reconnection logic
* Set default backend to remote backend when local backend is not available
* Attempt to suppress WebSocket error console message
* Minor fix for loading spinner
* Hide "Open as folder" context menu option, when on local backend
* Remove duplicate `onSubmit` handler
* Fix live-reload
* Remove debug `console.log`
* Minor refactor; properly unset modals on click
* "created" project state for local backend, for parity with remote backend
* Hide directory path when on local backend
* Undo minor refactor
* set newDashboard & authentication flags to true
* Revert "set newDashboard & authentication flags to true"
This reverts commit 5974170866.
---------
Co-authored-by: Paweł Buchowski <pawel.buchowski@enso.org>
Fixes#5203
This PR changes behavior when `text/applyChange` returned error.
Before we always assumed that the change was _not_ applied, and tried to send full synchronization still assuming old file content. But this was not the case on some errors (timeouts for example). Now we instead reopen the file (getting its actual content) and then make a full invalidation.
Also added a shortcut allowing manual file reloading, what may be useful in some kinds of error (and also allowed me testing of reopening file in the application).
# Important Notes
The unit tests of sending text updates were improved: now we actually check if all expected messages are emitted from the IDE.
