Fixes#6772
When detaching an existing edge by grabbing by a source port, the node's code is no longer immediately modified. It is only changed once the edge has been either connected or destroyed. When grabbing on the source side, the existing behavior is preserved. That way, we always have guaranteed place to keep the edge connected to.
https://github.com/enso-org/enso/assets/919491/49e560cb-0a29-4c6a-97ec-4370185b8c89
In general, the detached edges are now more stable, resilient to all kinds of expression modifications during the drag.
https://github.com/enso-org/enso/assets/919491/e62450ff-46b2-466f-ac33-f4f19e66ee1d
In case there is a situation where the currently dragged edge's port is destroyed (e.g. by Undo/Redo), instead of showing glitched port position it is simply dropped.
https://github.com/enso-org/enso/assets/919491/8fb089aa-a4a5-4a8c-92eb-23aeff9867b8
# Important Notes
The whole edge connection and view handling at the graph-editor view level has been completely rewritten. The edge endpoints are now identified using new `PortId` structure, that is not dependant on the span-tree. This prepares us for eventual removal of the span-tree in favour of manipulating AST directly. Right now those `PortId`s are still stored within the span-tree nodes, but it will be easy to eventually generate them on the fly from the AST itself. The widget tree has also already been switched to that representation where appropriate.
Additionally, I have started splitting the graph editor FRP network into smaller methods. Due to its absolutely enormous size and complexity of it, I haven't finished the split completely, and mostly edge-related part is refactored. I don't want to block this PR on this any longer though, as the merge conflicts are getting a bit unwieldy to deal with.
1. Fixed leaks of Scene. We were making several cycles of Rc references.
2. Fix removing event listeners: the remove listener option should take same options as those passed in addEventListener.
This should finally fix#6505
Fixes performance problems observed when creating/resolving errors (#6674):
|before|after|
|---|---|
|||
This also helps with #6637, although I haven't been able to reproduce the degree of slowness shown there so I can't confirm that this resolves that issue.
# Important Notes
- Disable visualizations until shown. [Faster startup, and all graph changes.]
- 6x faster message deserialization. [Saves 400ms when making a change with many visualizations open.]
- Fast edge recoloring. [Saves 100-150ms when disconnecting an edge in Orders.]
- Add a checked implementation of a `profiler` data structure, used instead of the fast `unsafe` version when `debug-assertions` are enabled.
Several small changes:
- Dropdowns: Populate `GridView` lazily (fixes#6865).
- Clear disconnected edges when editing node (fixes case 1 in #7018).
- Fix regression in node selection rendering (2nd bug in #6975).
- Update profiler docs. The hotkey to *prOfile without exiting* is now `Ctrl+Alt+O` (`Ctrl+Alt+P` has been requisitioned by the CB).
Node selection:
| Pre-`Rectangle` | This PR |
| --- | --- |
|  |  |
# Important Notes
- `Rectangle`: When `inset > border`, the extra space is now between the body and the border, not outside the border.
- More robust node layering logic. Now an inconsistent layer order cannot occur, even if something strange happens (like editing an expression and an edge at the same time).
- The dynamic drop down in the `drop_down` example scene doesn't show any entries before (or after) this, so I can't test the dynamic case.
This PR adds facilities for controllers to be aware of what shortcut command is currently being processed. This allows grouping consequences of single user action into a single transaction without hard-coding it separately for all the separate paths case-by-case, which turned out to be challenging and error-prone.
Additionally, a number of minor fixes were carried over from #6877:
* workaround for #6718;
* avoiding creating spurious transactions when dealing with node positions;
* dropping any non-user user-triggered transactions that occur during the IDE project initialization.
Before, we prevented default on every keyboard event, making usage of HTML inputs impossible (both on the dashboard and inside visualizations).
# Important Notes
The list of shortcuts was based on comments in #6364 (where the `preventDefault` was introduced).
Implements #6544 (eliminates 10/42 of the constantly-displayed draw calls).
Fixes#6717. Improves startup CPU time by 5% (250ms, loading Orders on my dev box).
# Important Notes
- Edges: New implementation uses only Rectangle under most conditions.
- Node and action area: Replace some shapes with Rectangle.
- List view: Replace some shapes with Rectangle.
- Display object hierarchy: The lowest-level shape instance types no longer have their own display objects.
- Includes initial support for using `Rectangle` to display triangles.
Implements #6792Fixes#6715Fixes#6052Fixes#5689
The dynamic dropdown widgets entries now can specify additional widget configuration as a list of `parameters` of the inner method call. That allows for creating smarter widgets within nested constructors, taking the outer widget's context into account.
<img width="772" alt="image" src="https://github.com/enso-org/enso/assets/919491/97c70654-9170-4cf0-ae4d-2c25c74caa96">
With the changes to the serialization logic, I have also adressed issues related to automatic label generation for both static and dynamic dropdown entries. For access chains (e.g. `Foo.Bar.Baz_Qux`), the label will now always contain only the last segment, and all underscores will be removed (e.g. `Baz Qux`). This also applies to dynamic entries where the label is not explicitly specified in method annotation.
<img width="265" alt="image" src="https://github.com/enso-org/enso/assets/919491/1abe6c77-010b-4622-b252-97cd1543cb48">
Additionaly, now the dynamic entries containing constructors will also be resolved within suggestion database, allowing us to automatically insert relevant import, shorten the actually used expression and wrap it with parentheses if required. That was required for nested widgets to show up, as we depend on properly resolved argument names to show them. The widget definitions in annotations no longer need to wrap the expressions manually. Instead, the constructors used in dropdown entries should be specified using fully qualified names, similarly to how we do it in tag values.
CC @jdunkerley - The dropdown entries containing just a constructor will no longer need added parentheses around them. Instead, the constructors should be specified using fully qualified names, similarly to how we do it in tag values.
<img width="389" alt="image" src="https://github.com/enso-org/enso/assets/919491/19944b5b-d0c7-43ac-bf17-ca1556e0b3f0">
Note that currently the import resolution is attempted even if the used constructor is is not specified using a fully qualified name. To accomplish that, the IDE is performing a more expensive search through whole suggestion database for matching type and module (e.g. in example above, we are searching for a match for `Aggregate_Column.First`). If there are multiple potential matches due to a name collision, it is undefined which one would be preferred. Effectively one will be picked at random. To avoid that, the libraries should over time transition to using fully qualified names wherever possible.
# Important Notes
I have removed the `payload` field from the span tree, and with it the generic argument on its nodes. This was already partially done on the branch with new design, on which I also had a few changes that turned out to be useful for this PR. So I pulled it in as well. It is a nice simplification that will ease our further work on removing the span-tree altogether. The biggest impact it had was on the node output port, where I had to store the port data outside of the span tree. This is the approach we would be taking when transitioning to AST anyway.
Only invalidate the graph editor view at most once per frame. On develop, this saves about 70ms (2%). Testing a recent backend without #6755 as a stress-test, this saves about 5s (45%). This reflects better scalability to large numbers of `SuggestionUpdate` messages.
Fixes#6630.
# Important Notes
- Also fix intermittent profiling failures occurring since the introduction of microtasks.
* Remove unused code: project management in component browser
* Encapsulate internal FRP logic of project list
* Collapse some code paths
* Open project passed on command line through presenter
A project name or ID that is passed on the command line was initialised
in the controller setup, before the presenters and views are set up.
Now, we fully initialise the IDE before opening a project so we have
control over the view while a project is being opened.
* Show a spinner in all cases of opening a project
* Let root presenter open/close projects when switching projects
* Change spinner to make progress over a fixed period
* Resolve issues when Project Manager API isn't available
* Bump wasm size limit
Fixes some of #6662
Issues addressed:
- `ide watch` and `gui watch` should now use the desktop platform
- error screen should now be shown when passing invalid options
- password (both creating password when registering, and resetting password) should now warn on invalid input
# Important Notes
Instead of checking whether `location.hostname === 'localhost'`, I've opted to use a constant defined by the build tool instead. This is to make it easier to merge the cloud IDE and desktop IDE entrypoints in the future, since it would be able to simply set `platform: Platform.cloud` in the build config.
Refactored the logic behind selecting appropriate widgets for span tree nodes. Now the bulk of it is moved into widget methods. When a given widget type is reporting to be not compatible with the expression, it will not be used even if the configuration was overriden using an method argument annotation. In that case, the usual logic for automatically selecting the appropriate widget will kick in.
* Run typecheck and eslint on Lint CI
* Address reviews; fix type errors in `.d.ts` files
* Remove unused parameter
* Run prettier
* Fix lint error
---------
Co-authored-by: Paweł Buchowski <pawel.buchowski@enso.org>
# Important Notes
The mouse handling changes involve an unfortunate huge hack, where we enable mouse events on the mouse shape during box selection. That way we know for sure that no other shape will be able to receive mouse enter event. Then the list editor widget is modified to only actually respond to events when its background is hovered. We will definitely want a more proper way to handle mouse event contention, but it's definitely out of scope for current bugfixing.
Fixes#5088. Adds a ensoGL spinner for visualizations waiting on data.
https://user-images.githubusercontent.com/1428930/236801655-67a0ffed-da5d-4e27-8797-cd8126cb86d9.mp4
# Important Notes
This spinner will not show up for the duration where visualizations are processing data on the frontend. If this is a concern, visualization need to implement heir own loading spinner, or we need to provide a unified API for them to keep the spinner visible.
This PR fixes#6560.
The fix has a few elements:
1) Bumps the Engine requirement to the latest release, namely `2023.1.1`.
2) Changed the logic of checking whether a given version matches the requirement. Previously, we relied on `VersionReq` from `semver` crate which did not behave intuitively when the required version had a prerelease suffix. Now we rely directly on Semantic Versioning rules of precedence.
3) Code cleanups, including deduplicating 3 copies of the version-checking code, and moving some tests to more sensible places.
This is a re-creation of #6308.
Creates buttons to switch between cloud and local backends for listing directories, opening projects etc.
# Important Notes
The desktop backend currently uses a hardcoded list of templates, mostly because they look better because they have background images. However, it can easily be changed to use `listSamples` endpoint and switched to the default grey background.
This PR fixes#6371.
# Important Notes
@kazcw @wdanilo I don't particularly like this solution, but I don't see any other good way to define the relationship between two instances of the same shape (`Rectangle`) used in different UI elements. If you are aware of a more elegant solution, I’d be happy to hear any suggestions.
Support rendering multiple flavors of a shape system in the same layer. Fixes bugs seen as text disappearing when multiple fonts are used together (#6460 and issue discussed in #6366).
Rewrites node input component. Now the input is composed of multiple widget components arranged in a tree of views with automatic layout. That allows creating complex UI elements on top of the node itself, and further widget positions will be automatically adapted to that. The tree roughly follow the span tree, as it is built by consuming its nodes and eagerly creating widgets from them. The tree is rebuilt every time the expression changes, but that rebuild process reuses as much previously created widgets as possible, and only updates their configuration as needed. Each widget type can have its own configuration options that can be passed to it from the parent, or assigned based on configuration received from the language server.
<img width="773" alt="image" src="https://user-images.githubusercontent.com/919491/233439310-9c39ea88-19bc-43da-9baf-1bb176e2724e.png">
# Important Notes
For now, all span-tree updates are sent over to the shared Frp endpoint of the whole tree, so there is no mechanism for intercepting them by the parent widgets. One idea would be to use existing bubbling/capturing events on widget display objects for that purpose, but I think existing implementation is simpler and more convenient, and we can always easily change that if we have a use for it.
There are some issues with performance due to much more display objects being created on the graph. Expect it to be a little worse, especially at initialization time.
Fixes#6385
Partial rollback of #6364
It turns out that preventing default for mouse events is a bad idea in general. It shouldn't affect other fixed bugs because (afaik) all of them were caused by keyboard events.
We're still preventing default for keyboard events.
Integrate the UI for electing the Execution Environment with the Language Server and unify existing uses. Implements #5930 + actual integration instead of just mocking it.
https://user-images.githubusercontent.com/1428930/232919438-6e1e295a-34fe-4756-86a4-5f5d8f718fa0.mp4
# Important Notes
The console output is only emitted as part of the `INFO` level. A better check would be to look at the messages sent to the backend in the developer console.
Fixes#6317
The `drop` method is available in the WASM object. This can be tested by typing `ensoglApp.wasm.drop()` in the dev console - all objects should be removed and all connections closed.
# Important Notes
* This PR fixed serveral leaks by this occasion
* A new tool for tracking leaks was added to prelude's `debug` module.
Vector Editor widget is improved: replaced old simple widget with List Editor, and added integration for adding elements.
# Important Notes
The widget is still under feature flag: `--feature-preview.vector-editor`.
* Use Rectangle for breadcrumbs background.
* Use Rectangle for status bar bg.
* Use Rectangle for dropdown bg.
* Dirty global_element_depth_order invalidates sublayers
* Setting new parent may invalidate depth order
* Support per-instance pointer_events_enabled
* Remove workaround for #6241
