sapling/infinitepush/__init__.py

1032 lines
37 KiB
Python
Raw Normal View History

infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
# Infinite push
#
# Copyright 2016 Facebook, Inc.
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
"""
[infinitepush]
# Server-side and client-side option. Pattern of the infinitepush bookmark
branchpattern = PATTERN
# Server or client
server = False
# Server-side option. Possible values: 'disk' or 'sql'. Fails if not set
indextype = disk
# Server-side option. Used only if indextype=sql.
# Format: 'IP:PORT:DB_NAME:USER:PASSWORD'
sqlhost = IP:PORT:DB_NAME:USER:PASSWORD
# Server-side option. Used only if indextype=disk.
# Filesystem path to the index store
indexpath = PATH
# Server-side option. Possible values: 'disk' or 'external'
# Fails if not set
storetype = disk
# Server-side option.
# Path to the binary that will save bundle to the bundlestore
# Formatted cmd line will be passed to it (see `put_args`)
put_binary = put
# Serser-side option. Used only if storetype=external.
# Format cmd-line string for put binary. Placeholder: {filename}
put_args = {filename}
# Server-side option.
# Path to the binary that get bundle from the bundlestore.
# Formatted cmd line will be passed to it (see `get_args`)
get_binary = get
# Serser-side option. Used only if storetype=external.
# Format cmd-line string for get binary. Placeholders: {filename} {handle}
get_args = {filename} {handle}
# Server-side option
logfile = FIlE
# Server-side option
loglevel = DEBUG
# Client-side option
debugbackuplog = FILE
"""
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
from __future__ import absolute_import
import errno
import hashlib
import json
import logging
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
import os
import resource
import socket
import struct
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
import tempfile
from collections import defaultdict
from hgext3rd.extutil import runshellcommand
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
from mercurial import (
bundle2,
changegroup,
cmdutil,
commands,
discovery,
encoding,
error,
exchange,
extensions,
hg,
localrepo,
util,
pushkey,
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
revset,
phases,
wireproto,
)
from mercurial.extensions import wrapcommand, wrapfunction
from mercurial.hg import repository
from mercurial.node import bin, hex
from mercurial.i18n import _
from mercurial.peer import batchable, future
from mercurial.wireproto import encodelist, decodelist
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
cmdtable = {}
command = cmdutil.command(cmdtable)
pushrebaseparttype = 'b2x:rebase'
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
scratchbranchparttype = 'b2x:infinitepush'
scratchbookmarksparttype = 'b2x:infinitepushscratchbookmarks'
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
experimental = 'experimental'
configmanybookmarks = 'server-bundlestore-manybookmarks'
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
configbookmark = 'server-bundlestore-bookmark'
configcreate = 'server-bundlestore-create'
configscratchpush = 'infinitepush-scratchpush'
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
_scratchbranchmatcher = lambda x: False
def _buildexternalbundlestore(ui):
put_args = ui.configlist('infinitepush', 'put_args', [])
put_binary = ui.config('infinitepush', 'put_binary')
if not put_binary:
raise error.Abort('put binary is not specified')
get_args = ui.configlist('infinitepush', 'get_args', [])
get_binary = ui.config('infinitepush', 'get_binary')
if not get_binary:
raise error.Abort('get binary is not specified')
from . import store
return store.externalbundlestore(put_binary, put_args, get_binary, get_args)
def _buildsqlindex(ui):
sqlhost = ui.config('infinitepush', 'sqlhost')
if not sqlhost:
raise error.Abort(_('please set infinitepush.sqlhost'))
host, port, db, user, password = sqlhost.split(':')
reponame = ui.config('infinitepush', 'reponame')
if not reponame:
raise error.Abort(_('please set infinitepush.reponame'))
logfile = ui.config('infinitepush', 'logfile', '')
waittimeout = ui.configint('infinitepush', 'waittimeout', 300)
from . import sqlindexapi
return sqlindexapi.sqlindexapi(
reponame, host, port, db, user, password,
logfile, _getloglevel(ui), waittimeout=waittimeout)
def _getloglevel(ui):
loglevel = ui.config('infinitepush', 'loglevel', 'DEBUG')
numeric_loglevel = getattr(logging, loglevel.upper(), None)
if not isinstance(numeric_loglevel, int):
raise error.Abort(_('invalid log level %s') % loglevel)
return numeric_loglevel
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
class bundlestore(object):
def __init__(self, repo):
self._repo = repo
storetype = self._repo.ui.config('infinitepush', 'storetype', '')
if storetype == 'disk':
from . import store
self.store = store.filebundlestore(self._repo.ui, self._repo)
elif storetype == 'external':
self.store = _buildexternalbundlestore(self._repo.ui)
else:
raise error.Abort(
_('unknown infinitepush store type specified %s') % storetype)
indextype = self._repo.ui.config('infinitepush', 'indextype', '')
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
if indextype == 'disk':
from . import fileindexapi
self.index = fileindexapi.fileindexapi(self._repo)
elif indextype == 'sql':
self.index = _buildsqlindex(self._repo.ui)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
else:
raise error.Abort(
_('unknown infinitepush index type specified %s') % indextype)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
def _isserver(ui):
return ui.configbool('infinitepush', 'server')
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
def reposetup(ui, repo):
if _isserver(ui) and repo.local():
repo.bundlestore = bundlestore(repo)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
def uisetup(ui):
# remotenames circumvents the default push implementation entirely, so make
# sure we load after it so that we wrap it.
order = extensions._order
order.remove('infinitepush')
order.append('infinitepush')
extensions._order = order
def extsetup(ui):
commonsetup(ui)
if _isserver(ui):
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
serverextsetup(ui)
else:
clientextsetup(ui)
def commonsetup(ui):
wireproto.commands['listkeyspatterns'] = (
wireprotolistkeyspatterns, 'namespace patterns')
scratchbranchpat = ui.config('infinitepush', 'branchpattern')
if scratchbranchpat:
global _scratchbranchmatcher
kind, pat, _scratchbranchmatcher = util.stringmatcher(scratchbranchpat)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
def serverextsetup(ui):
origpushkeyhandler = bundle2.parthandlermapping['pushkey']
def newpushkeyhandler(*args, **kwargs):
bundle2pushkey(origpushkeyhandler, *args, **kwargs)
newpushkeyhandler.params = origpushkeyhandler.params
bundle2.parthandlermapping['pushkey'] = newpushkeyhandler
wrapfunction(localrepo.localrepository, 'listkeys', localrepolistkeys)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
wireproto.commands['lookup'] = (
_lookupwrap(wireproto.commands['lookup'][0]), 'key')
wrapfunction(exchange, 'getbundlechunks', getbundlechunks)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
def clientextsetup(ui):
entry = wrapcommand(commands.table, 'push', _push)
# Don't add the 'to' arg if it already exists
if not any(a for a in entry[1] if a[1] == 'to'):
entry[1].append(('', 'to', '', _('push revs to this bookmark')))
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
if not any(a for a in entry[1] if a[1] == 'create'):
entry[1].append(
('', 'create', None, _('create a new remote bookmark')))
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
entry[1].append(
('', 'bundle-store', None,
_('force push to go to bundle store (EXPERIMENTAL)')))
bookcmd = extensions.wrapcommand(commands.table, 'bookmarks', exbookmarks)
bookcmd[1].append(
('', 'list-remote', '',
'list remote bookmarks. '
'Use \'*\' to find all bookmarks with the same prefix',
'PATTERN'))
bookcmd[1].append(
('', 'remote-path', '',
'name of the remote path to list the bookmarks'))
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
wrapcommand(commands.table, 'pull', _pull)
wrapfunction(discovery, 'checkheads', _checkheads)
wireproto.wirepeer.listkeyspatterns = listkeyspatterns
# Move infinitepush part before pushrebase part
# to avoid generation of both parts.
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
partorder = exchange.b2partsgenorder
index = partorder.index('changeset')
if pushrebaseparttype in partorder:
index = min(index, partorder.index(pushrebaseparttype))
partorder.insert(
index, partorder.pop(partorder.index(scratchbranchparttype)))
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
def _showbookmarks(ui, bookmarks, **opts):
# Copy-paste from commands.py
fm = ui.formatter('bookmarks', opts)
for bmark, n in sorted(bookmarks.iteritems()):
fm.startitem()
if not ui.quiet:
fm.plain(' ')
fm.write('bookmark', '%s', bmark)
pad = ' ' * (25 - encoding.colwidth(bmark))
fm.condwrite(not ui.quiet, 'node', pad + ' %s', n)
fm.plain('\n')
fm.end()
def exbookmarks(orig, ui, repo, *names, **opts):
pattern = opts.get('list_remote')
if pattern:
remotepath = opts.get('remote_path')
path = ui.paths.getpath(remotepath or None, default=('default'))
destpath = path.pushloc or path.loc
other = hg.peer(repo, opts, destpath)
fetchedbookmarks = other.listkeyspatterns('bookmarks',
patterns=[pattern])
_showbookmarks(ui, fetchedbookmarks, **opts)
return
return orig(ui, repo, *names, **opts)
def _checkheads(orig, pushop):
if pushop.ui.configbool(experimental, configscratchpush, False):
return
return orig(pushop)
def wireprotolistkeyspatterns(repo, proto, namespace, patterns):
patterns = decodelist(patterns)
d = repo.listkeys(encoding.tolocal(namespace), patterns).iteritems()
return pushkey.encodekeys(d)
def localrepolistkeys(orig, self, namespace, patterns=None):
if namespace == 'bookmarks' and patterns:
index = self.bundlestore.index
results = {}
bookmarks = orig(self, namespace)
for pattern in patterns:
results.update(index.getbookmarks(pattern))
if pattern.endswith('*'):
pattern = 're:^' + pattern[:-1] + '.*'
kind, pat, matcher = util.stringmatcher(pattern)
for bookmark, node in bookmarks.iteritems():
if matcher(bookmark):
results[bookmark] = node
return results
else:
return orig(self, namespace)
@batchable
def listkeyspatterns(self, namespace, patterns):
if not self.capable('pushkey'):
yield {}, None
f = future()
self.ui.debug('preparing listkeys for "%s" with pattern "%s"\n' %
(namespace, patterns))
yield {
'namespace': encoding.fromlocal(namespace),
'patterns': encodelist(patterns)
}, f
d = f.value
self.ui.debug('received listkey for "%s": %i bytes\n'
% (namespace, len(d)))
yield pushkey.decodekeys(d)
def _includefilelogstobundle(bundlecaps, bundlerepo, ui):
'''Tells remotefilelog to include all changed files to the changegroup
By default remotefilelog doesn't include file content to the changegroup.
But we need to include it if we are fetching from bundlestore.
'''
revs = bundlerepo.revs('bundle()')
cl = bundlerepo.changelog
changedfiles = set()
for r in revs:
# [3] means changed files
changedfiles.update(cl.read(r)[3])
if not changedfiles:
return bundlecaps
changedfiles = '\0'.join(changedfiles)
newcaps = []
appended = False
for cap in (bundlecaps or []):
if cap.startswith('excludepattern='):
newcaps.append('\0'.join((cap, changedfiles)))
appended = True
else:
newcaps.append(cap)
if not appended:
# Not found excludepattern cap. Just append it
newcaps.append('excludepattern=' + changedfiles)
return newcaps
def getbundlechunks(orig, repo, source, heads=None, common=None,
bundlecaps=None, **kwargs):
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
# Check if heads exists, if not, check bundle store
hasscratchnode = False
for head in heads:
if head not in repo.changelog.nodemap:
if hasscratchnode:
raise error.Abort(
'not implemented: not possible to pull more than '
'one scratch branch')
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
index = repo.bundlestore.index
store = repo.bundlestore.store
bundleid = index.getbundle(hex(head))
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
bundleraw = store.read(bundleid)
bundlefile = _makebundlefromraw(bundleraw)
bundlepath = "bundle:%s+%s" % (repo.root, bundlefile)
bundlerepo = repository(repo.ui, bundlepath)
repo = bundlerepo
hasscratchnode = True
bundlecaps = _includefilelogstobundle(bundlecaps, bundlerepo,
repo.ui)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
return orig(repo, source, heads=heads, common=common,
bundlecaps=bundlecaps, **kwargs)
def _lookupwrap(orig):
def _lookup(repo, proto, key):
localkey = encoding.tolocal(key)
if isinstance(localkey, str) and _scratchbranchmatcher(localkey):
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
scratchnode = repo.bundlestore.index.getnode(localkey)
if scratchnode:
return "%s %s\n" % (1, scratchnode)
else:
return "%s %s\n" % (0, 'scratch branch %s not found' % localkey)
else:
try:
c = repo[localkey]
r = c.hex()
return "%s %s\n" % (1, r)
except Exception as inst:
if repo.bundlestore.index.getbundle(localkey):
return "%s %s\n" % (1, localkey)
else:
r = str(inst)
return "%s %s\n" % (0, r)
return _lookup
def validaterevset(repo, revset, bookmark):
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
"""Abort if the revs to be pushed aren't valid for a scratch branch."""
if not repo.revs(revset):
raise error.Abort(_('nothing to push'))
if bookmark:
# Allow bundle with many heads only if no bookmark is specified
heads = repo.revs('heads(%r)', revset)
if len(heads) > 1:
raise error.Abort(
_('cannot push more than one head to a scratch branch'))
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
def getscratchbranchpart(repo, peer, outgoing, force, ui, bookmark, create):
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
if not outgoing.missing:
raise error.Abort(_('no commits to push'))
if scratchbranchparttype not in bundle2.bundle2caps(peer):
raise error.Abort(_('no server support for %r') % scratchbranchparttype)
validaterevset(repo, revset.formatspec('%ln', outgoing.missing), bookmark)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
cg = changegroup.getlocalchangegroupraw(repo, 'push', outgoing)
params = {}
if bookmark:
params['bookmark'] = bookmark
# 'prevbooknode' is necessary for pushkey reply part
params['bookprevnode'] = ''
if bookmark in repo:
params['bookprevnode'] = repo[bookmark].hex()
if create:
params['create'] = '1'
if force:
params['force'] = '1'
# Do not send pushback bundle2 part with bookmarks if remotenames extension
# is enabled. It will be handled manually in `_push()`
if not _isremotebooksenabled(ui):
params['pushbackbookmarks'] = '1'
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
# .upper() marks this as a mandatory part: server will abort if there's no
# handler
return bundle2.bundlepart(
scratchbranchparttype.upper(),
advisoryparams=params.iteritems(),
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
data=cg)
def _encodebookmarks(bookmarks):
encoded = {}
for bookmark, node in bookmarks.iteritems():
encoded[bookmark] = node
dumped = json.dumps(encoded)
result = struct.pack('>i', len(dumped)) + dumped
return result
def _decodebookmarks(stream):
sizeofjsonsize = struct.calcsize('>i')
size = struct.unpack('>i', stream.read(sizeofjsonsize))[0]
unicodedict = json.loads(stream.read(size))
# python json module always returns unicode strings. We need to convert
# it back to bytes string
result = {}
for bookmark, node in unicodedict.iteritems():
bookmark = bookmark.encode('ascii')
node = node.encode('ascii')
result[bookmark] = node
return result
def getscratchbookmarkspart(peer, bookmarks):
if scratchbookmarksparttype not in bundle2.bundle2caps(peer):
raise error.Abort(
_('no server support for %r') % scratchbookmarksparttype)
return bundle2.bundlepart(
scratchbookmarksparttype.upper(),
data=_encodebookmarks(bookmarks))
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
def _pull(orig, ui, repo, source="default", **opts):
# Copy paste from `pull` command
source, branches = hg.parseurl(ui.expandpath(source), opts.get('branch'))
hasscratchbookmarks = False
scratchbookmarks = {}
if opts.get('bookmark'):
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
bookmarks = []
revs = opts.get('rev') or []
for bookmark in opts.get('bookmark'):
if _scratchbranchmatcher(bookmark):
other = hg.peer(repo, opts, source)
if hasscratchbookmarks:
raise error.Abort('not implemented: not possible to pull '
'more than one scratch branch')
fetchedbookmarks = other.listkeyspatterns('bookmarks',
patterns=[bookmark])
if bookmark not in fetchedbookmarks:
raise error.Abort('remote bookmark %s not found!' %
bookmark)
scratchbookmarks[bookmark] = fetchedbookmarks[bookmark]
revs.append(fetchedbookmarks[bookmark])
hasscratchbookmarks = True
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
else:
bookmarks.append(bookmark)
opts['bookmark'] = bookmarks
opts['rev'] = revs
try:
inhibitmod = extensions.find('inhibit')
except KeyError:
# Ignore if inhibit is not enabled
pass
else:
# Pulling revisions that were filtered results in a error.
# Let's inhibit them
unfi = repo.unfiltered()
for rev in opts.get('rev', []):
try:
repo[rev]
except error.FilteredRepoLookupError:
node = unfi[rev].node()
inhibitmod._inhibitmarkers(repo.unfiltered(), [node])
except error.RepoLookupError:
pass
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
if hasscratchbookmarks:
# Set anyincoming to True
oldfindcommonincoming = wrapfunction(discovery,
'findcommonincoming',
_findcommonincoming)
try:
# Remote scratch bookmarks will be deleted because remotenames doesn't
# know about them. Let's save it before pull and restore after
remotescratchbookmarks = _readscratchremotebookmarks(ui, repo, source)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
result = orig(ui, repo, source, **opts)
# TODO(stash): race condition is possible
# if scratch bookmarks was updated right after orig.
# But that's unlikely and shouldn't be harmful.
if _isremotebooksenabled(ui):
remotescratchbookmarks.update(scratchbookmarks)
_saveremotebookmarks(repo, remotescratchbookmarks, source)
else:
_savelocalbookmarks(repo, scratchbookmarks)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
return result
finally:
if hasscratchbookmarks:
discovery.findcommonincoming = oldfindcommonincoming
def _isremotebooksenabled(ui):
return ('remotenames' in extensions._extensions and
ui.configbool('remotenames', 'bookmarks', True))
def _readscratchremotebookmarks(ui, repo, other):
if _isremotebooksenabled(ui):
remotenamesext = extensions.find('remotenames')
remotepath = remotenamesext.activepath(repo.ui, other)
result = {}
# Let's refresh remotenames to make sure we have it up to date
# Seems that `repo.names['remotebookmarks']` may return stale bookmarks
# and it results in deleting scratch bookmarks. Our best guess how to
# fix it is to use `clearnames()`
repo._remotenames.clearnames()
for remotebookmark in repo.names['remotebookmarks'].listnames(repo):
path, bookname = remotenamesext.splitremotename(remotebookmark)
if path == remotepath and _scratchbranchmatcher(bookname):
nodes = repo.names['remotebookmarks'].nodes(repo,
remotebookmark)
result[bookname] = hex(nodes[0])
return result
else:
return {}
def _saveremotebookmarks(repo, newbookmarks, remote):
remotenamesext = extensions.find('remotenames')
remotepath = remotenamesext.activepath(repo.ui, remote)
branches = defaultdict(list)
bookmarks = {}
remotenames = remotenamesext.readremotenames(repo)
for hexnode, nametype, remote, rname in remotenames:
if remote != remotepath:
continue
if nametype == 'bookmarks':
if rname in newbookmarks:
# It's possible if we have a normal bookmark that matches
# scratch branch pattern. In this case just use the current
# bookmark node
del newbookmarks[rname]
bookmarks[rname] = hexnode
elif nametype == 'branches':
# saveremotenames expects 20 byte binary nodes for branches
branches[rname].append(bin(hexnode))
for bookmark, hexnode in newbookmarks.iteritems():
bookmarks[bookmark] = hexnode
remotenamesext.saveremotenames(repo, remotepath, branches, bookmarks)
def _savelocalbookmarks(repo, bookmarks):
if not bookmarks:
return
with repo.wlock():
with repo.lock():
with repo.transaction('bookmark') as tr:
for scratchbook, node in bookmarks.iteritems():
changectx = repo[node]
repo._bookmarks[scratchbook] = changectx.node()
repo._bookmarks.recordchange(tr)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
def _findcommonincoming(orig, *args, **kwargs):
common, inc, remoteheads = orig(*args, **kwargs)
return common, True, remoteheads
def _push(orig, ui, repo, dest=None, *args, **opts):
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
oldbookmark = ui.backupconfig(experimental, configbookmark)
oldcreate = ui.backupconfig(experimental, configcreate)
oldphasemove = None
try:
bookmark = opts.get('to') or ''
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
create = opts.get('create') or False
scratchpush = opts.get('bundle_store')
if _scratchbranchmatcher(bookmark):
# Hack to fix interaction with remotenames. Remotenames push
# '--to' bookmark to the server but we don't want to push scratch
# bookmark to the server. Let's delete '--to' and '--create' and
# also set allow_anon to True (because if --to is not set
# remotenames will think that we are pushing anonymoush head)
if 'to' in opts:
del opts['to']
if 'create' in opts:
del opts['create']
opts['allow_anon'] = True
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
ui.setconfig(experimental, configbookmark, bookmark, '--to')
ui.setconfig(experimental, configcreate, create, '--create')
scratchpush = True
# bundle2 can be sent back after push (for example, bundle2
# containing `pushkey` part to update bookmarks)
ui.setconfig(experimental, 'bundle2.pushback', True)
if scratchpush:
ui.setconfig(experimental, configscratchpush, True)
oldphasemove = wrapfunction(exchange,
'_localphasemove',
_phasemove)
# Copy-paste from `push` command
path = ui.paths.getpath(dest, default=('default-push', 'default'))
if not path:
raise error.Abort(_('default repository not configured!'),
hint=_("see 'hg help config.paths'"))
destpath = path.pushloc or path.loc
if destpath.startswith('svn+') and scratchpush:
raise error.Abort('infinite push does not work with svn repo',
hint='did you forget to `hg push default`?')
# Remote scratch bookmarks will be deleted because remotenames doesn't
# know about them. Let's save it before push and restore after
remotescratchbookmarks = _readscratchremotebookmarks(ui, repo, destpath)
result = orig(ui, repo, dest, *args, **opts)
if _isremotebooksenabled(ui):
if bookmark and scratchpush:
other = hg.peer(repo, opts, destpath)
fetchedbookmarks = other.listkeyspatterns('bookmarks',
patterns=[bookmark])
remotescratchbookmarks.update(fetchedbookmarks)
_saveremotebookmarks(repo, remotescratchbookmarks, destpath)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
finally:
ui.restoreconfig(oldbookmark)
ui.restoreconfig(oldcreate)
if oldphasemove:
exchange._localphasemove = oldphasemove
return result
def _getcommonprefix(ui, repo):
username = ui.shortuser(ui.username())
hostname = socket.gethostname()
result = '/'.join(('infinitepush',
'backups',
username,
hostname))
if not repo.origroot.startswith('/'):
result += '/'
result += repo.origroot
if result.endswith('/'):
result = result[:-1]
return result
def _getbackupbookmarkprefix(ui, repo):
return '/'.join((_getcommonprefix(ui, repo),
'bookmarks'))
def _escapebookmark(bookmark):
'''
If `bookmark` contains "/bookmarks/" as a substring then replace it with
"/bookmarksbookmarks/". This will make parsing remote bookmark name
unambigious.
'''
return bookmark.replace('/bookmarks/', '/bookmarksbookmarks/')
def _getbackupbookmarkname(ui, bookmark, repo):
bookmark = encoding.fromlocal(bookmark)
bookmark = _escapebookmark(bookmark)
return '/'.join((_getbackupbookmarkprefix(ui, repo), bookmark))
def _getbackupheadprefix(ui, repo):
return '/'.join((_getcommonprefix(ui, repo),
'heads'))
def _getbackupheadname(ui, hexhead, repo):
return '/'.join((_getbackupheadprefix(ui, repo), hexhead))
@command('debugbackup', [('', 'background', None, 'run backup in background')])
def backup(ui, repo, dest=None, **opts):
"""
Pushes commits, bookmarks and heads to infinitepush.
New non-extinct commits are saved since the last `hg debugbackup` or since 0
revision if this backup is the first.
Local bookmarks are saved remotely as:
infinitepush/backups/USERNAME/HOST/REPOROOT/bookmarks/LOCAL_BOOKMARK
Local heads are saved remotely as:
infinitepush/backups/USERNAME/HOST/REPOROOT/heads/HEAD_HASH
"""
if opts.get('background'):
background_cmd = 'hg debugbackup'
logfile = ui.config('infinitepush', 'debugbackuplog')
if logfile:
background_cmd = background_cmd + ' &> ' + logfile
runshellcommand(background_cmd, os.environ)
return 0
backupedstatefile = 'infinitepushlastbackupedstate'
backuptipbookmarkshash = repo.svfs.tryread(backupedstatefile).split(' ')
backuptip = 0
# hash of empty string is the default. This is to prevent backuping of
# empty repo
bookmarkshash = hashlib.sha1().hexdigest()
if len(backuptipbookmarkshash) == 2:
try:
backuptip = int(backuptipbookmarkshash[0]) + 1
except ValueError:
pass
if len(backuptipbookmarkshash[1]) == 40:
bookmarkshash = backuptipbookmarkshash[1]
bookmarkstobackup = {}
for bookmark, node in repo._bookmarks.iteritems():
bookmark = _getbackupbookmarkname(ui, bookmark, repo)
hexnode = hex(node)
bookmarkstobackup[bookmark] = hexnode
for headrev in repo.revs('head() & not public()'):
hexhead = repo[headrev].hex()
headbookmarksname = _getbackupheadname(ui, hexhead, repo)
bookmarkstobackup[headbookmarksname] = hexhead
currentbookmarkshash = hashlib.sha1()
for book, node in sorted(bookmarkstobackup.iteritems()):
currentbookmarkshash.update(book)
currentbookmarkshash.update(node)
currentbookmarkshash = currentbookmarkshash.hexdigest()
# Use unfiltered repo because backuptip may now point to obsolete changeset
repo = repo.unfiltered()
# To avoid race conditions save current tip of the repo and backup
# everything up to this revision.
currenttiprev = len(repo) - 1
revs = ['null']
if backuptip <= currenttiprev:
revset = 'head() & draft() & %d:' % backuptip
revs = list(repo.revs(revset)) or ['null']
if currentbookmarkshash == bookmarkshash and revs == ['null']:
ui.status(_('nothing to backup\n'))
return 0
# Adding patterns to delete previous heads and bookmarks
bookmarkstobackup[_getbackupheadprefix(ui, repo) + '/*'] = ''
bookmarkstobackup[_getbackupbookmarkprefix(ui, repo) + '/*'] = ''
ui.setconfig(experimental, configmanybookmarks,
bookmarkstobackup, 'debugbackup')
pushcmd = commands.table['^push'][0]
pushopts = dict(opt[1:3] for opt in commands.table['^push'][1])
pushopts['rev'] = revs
pushopts['dest'] = dest
pushopts['bundle_store'] = True
if 'remotenames' in extensions._extensions:
# Remotenames doesn't allow to push anon heads. We need to override it
pushopts['allow_anon'] = True
result = pushcmd(ui, repo, **pushopts)
if result == 1:
# push sets exit-code to 1 if there are no changesets to push.
# We want a zero exit-code in this case.
result = 0
with repo.svfs(backupedstatefile, mode="w", atomictemp=True) as f:
f.write(str(currenttiprev) + ' ' + currentbookmarkshash)
return result
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
def _phasemove(orig, pushop, nodes, phase=phases.public):
"""prevent commits from being marked public
Since these are going to a scratch branch, they aren't really being
published."""
if phase != phases.public:
orig(pushop, nodes, phase)
@exchange.b2partsgenerator(scratchbranchparttype)
def partgen(pushop, bundler):
bookmark = pushop.ui.config(experimental, configbookmark)
create = pushop.ui.configbool(experimental, configcreate)
scratchpush = pushop.ui.configbool(experimental, configscratchpush)
if 'changesets' in pushop.stepsdone or not scratchpush:
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
return
if scratchbranchparttype not in bundle2.bundle2caps(pushop.remote):
return
pushop.stepsdone.add('changesets')
if not pushop.outgoing.missing:
pushop.ui.status(_('no changes found\n'))
pushop.cgresult = 0
return
scratchpart = getscratchbranchpart(pushop.repo,
pushop.remote,
pushop.outgoing,
pushop.force,
pushop.ui,
bookmark,
create)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
bundler.addpart(scratchpart)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
def handlereply(op):
# server either succeeds or aborts; no code to read
pushop.cgresult = 1
return handlereply
@exchange.b2partsgenerator(scratchbookmarksparttype)
def partgen(pushop, bundler):
manybookmarks = pushop.ui.config(experimental, configmanybookmarks)
if manybookmarks:
bundler.addpart(getscratchbookmarkspart(pushop.remote, manybookmarks))
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
bundle2.capabilities[scratchbranchparttype] = ()
bundle2.capabilities[scratchbookmarksparttype] = ()
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
def _makebundlefile(part):
"""constructs a temporary bundle file
part.data should be an uncompressed v1 changegroup"""
fp = None
fd, bundlefile = tempfile.mkstemp()
try: # guards bundlefile
try: # guards fp
fp = os.fdopen(fd, 'wb')
magic = 'HG10UN'
fp.write(magic)
data = part.read(resource.getpagesize() - len(magic))
while data:
fp.write(data)
data = part.read(resource.getpagesize())
finally:
fp.close()
except Exception:
try:
os.unlink(bundlefile)
except Exception:
# we would rather see the original exception
pass
raise
return bundlefile
def _makebundlefromraw(data):
fp = None
fd, bundlefile = tempfile.mkstemp()
try: # guards bundlefile
try: # guards fp
fp = os.fdopen(fd, 'wb')
fp.write(data)
finally:
fp.close()
except Exception:
try:
os.unlink(bundlefile)
except Exception:
# we would rather see the original exception
pass
raise
return bundlefile
def _getrevs(bundle, oldnode, force, bookmark):
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
'extracts and validates the revs to be imported'
revs = [bundle[r] for r in bundle.revs('sort(bundle())')]
# new bookmark
if oldnode is None:
return revs
# Fast forward update
if oldnode in bundle and list(bundle.set('bundle() & %s::', oldnode)):
return revs
# Forced non-fast forward update
if force:
return revs
else:
raise error.Abort(_('non-forward push'),
hint=_('use --force to override'))
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
@bundle2.parthandler(scratchbranchparttype,
('bookmark', 'bookprevnode' 'create', 'force',
'pushbackbookmarks'))
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
def bundle2scratchbranch(op, part):
'''unbundle a bundle2 part containing a changegroup to store'''
params = part.params
index = op.repo.bundlestore.index
store = op.repo.bundlestore.store
op.records.add(scratchbranchparttype + '_skippushkey', True)
bundlefile = None
try: # guards bundlefile
bundlefile = _makebundlefile(part)
bundlepath = "bundle:%s+%s" % (op.repo.root, bundlefile)
bundle = repository(op.repo.ui, bundlepath)
bookmark = params.get('bookmark')
bookprevnode = params.get('bookprevnode', '')
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
create = params.get('create')
force = params.get('force')
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
if bookmark:
oldnode = index.getnode(bookmark)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
if not oldnode and not create:
raise error.Abort("unknown bookmark %s" % bookmark,
hint="use --create if you want to create one")
else:
oldnode = None
bundleheads = bundle.revs('heads(bundle())')
if bookmark and len(bundleheads) > 1:
raise error.Abort(
_('cannot push more than one head to a scratch branch'))
revs = _getrevs(bundle, oldnode, force, bookmark)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
# Notify the user of what is being pushed
plural = 's' if len(revs) > 1 else ''
op.repo.ui.warn(_("pushing %s commit%s:\n") % (len(revs), plural))
maxoutput = 10
for i in range(0, min(len(revs), maxoutput)):
firstline = bundle[revs[i]].description().split('\n')[0][:50]
op.repo.ui.warn((" %s %s\n") % (revs[i], firstline))
if len(revs) > maxoutput + 1:
op.repo.ui.warn((" ...\n"))
firstline = bundle[revs[-1]].description().split('\n')[0][:50]
op.repo.ui.warn((" %s %s\n") % (revs[-1], firstline))
nodes = [hex(rev.node()) for rev in revs]
inindex = lambda rev: bool(index.getbundle(bundle[rev].hex()))
hasnewheads = any(not inindex(rev) for rev in bundleheads)
# If there's a bookmark specified, there should be only one head,
# so we choose the last node, which will be that head.
# If a bug or malicious client allows there to be a bookmark
# with multiple heads, we will place the bookmark on the last head.
bookmarknode = nodes[-1] if nodes else None
with index:
if hasnewheads:
with open(bundlefile, 'r') as f:
key = store.write(f.read())
index.addbundle(key, nodes)
if bookmark:
index.addbookmark(bookmark, bookmarknode)
_maybeaddpushbackpart(op, bookmark, bookmarknode,
bookprevnode, params)
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
finally:
try:
if bundlefile:
os.unlink(bundlefile)
except OSError as e:
if e.errno != errno.ENOENT:
raise
return 1
@bundle2.parthandler(scratchbookmarksparttype, ('prefixestodelete',))
def bundle2scratchbookmarks(op, part):
'''Handler deletes bookmarks first then adds new bookmarks.
'''
index = op.repo.bundlestore.index
decodedbookmarks = _decodebookmarks(part)
toinsert = {}
todelete = []
for bookmark, node in decodedbookmarks.iteritems():
if node:
toinsert[bookmark] = node
else:
todelete.append(bookmark)
with index:
if todelete:
index.deletebookmarks(todelete)
if toinsert:
index.addmanybookmarks(toinsert)
def _maybeaddpushbackpart(op, bookmark, newnode, oldnode, params):
if params.get('pushbackbookmarks'):
if op.reply and 'pushback' in op.reply.capabilities:
params = {
'namespace': 'bookmarks',
'key': bookmark,
'new': newnode,
'old': oldnode,
}
op.reply.newpart('pushkey', mandatoryparams=params.iteritems())
infinitepush: sample implementation Summary: Copy of hackbranch hackathon project with a few changes. The goal is to allow saving commits under certain bookmarks in the separate store. These bookmarks are called 'scratch' bookmarks and are defined in config file (for example, 're:scratch/.+'). Scratch commits are sent in a separate bundle2 part during push. During pull new bundle repo is created and requests are served using this bundle repo. There are a few changes from hackathon project implementation. # It requires no changes in mercurial core. It was done by wrapping `findcommonincoming()` function and changing `lookup()` wireproto method (see below). # Instead of introducing `listkeypattern()` wireproto method, `lookup()` method and `pull()` command were wrapped. I did it because I thought that it will make code easier. It probably haven't made it easier, it's almost the same. I can change it back to `listkeypattern` if it's necessary. The bad thing about current implementation is that scratch bookmarks are not downloaded. But in the previous implementation also haven't downloaded bookmark if remotenames is enabled. There are a couple of problems: 1) As I mentioned before, scratch bookmarks are not downloaded 2) It's impossible to pull both scratch and non-scratch bookmark Test Plan: python ../../../hg-crew/tests/run-tests.py test-bundlestore.t Reviewers: durham, rmcelroy, mitrandir Reviewed By: mitrandir Subscribers: mjpieters Differential Revision: https://phabricator.intern.facebook.com/D3750999 Tasks: 12479677 Signature: t1:3750999:1472052396:5d7828566863f0aa437cdc34439ec0759503c6c9
2016-08-26 16:09:01 +03:00
def bundle2pushkey(orig, op, part):
if op.records[scratchbranchparttype + '_skippushkey']:
if op.reply is not None:
rpart = op.reply.newpart('reply:pushkey')
rpart.addparam('in-reply-to', str(part.id), mandatory=False)
rpart.addparam('return', '1', mandatory=False)
return 1
return orig(op, part)