To figure out what to do with locally unknown files, Mercurial attempts to read
them if they exist. When an attempt is made to read a file that exists but
traverses a symlink, Mercurial aborts.
With this patch, we first ensure that the file doesn't traverse a symlink
before opening it. This is fine because a file being "remote created" means the
symlink doesn't exist remotely, which means it will be deleted in the apply
phase.
Before this patch, largefiles extension checks unknown files in the
working directory always case sensitively.
This causes failure in updating from the revision X consisting of
'.hglf/A' (and "A" implicitly) to the revision Y consisting of 'a'
(not ".hglf/A") on case insensitive filesystem, because "A" in the
working directory is treated as colliding against and different from
'a' on the revision Y.
This patch uses "repo.dirstate.normalize()" to check unknown files
with case awareness of the filesystem.
Before this patch, largefiles extension always unlinks largefiles
untracked on the target context in merging/updating after updating
working directory.
For example, it is assumed that the revision X consists of ".hglf/A"
(and "A" implicitly) and revision Y consists of "a" (not ".hglf/A").
In the case of updating from X to Y, largefiles extension tries to
unlink "A" after updating "a" in working directory. This causes
unexpected unlinking "a" on the case insensitive filesystem.
This patch checks existence of the file in the working context with
case awareness of the filesystem to prevent from such unexpected
unlinking.
"lfcommands._updatelfile()" also unlinks target file in the case
"largefile is tracked in the target context, but fails to be fetched".
This patch doesn't apply "repo.dirstate.normalize()" in this case,
because it should be already ensured in the manifest merging that
there is no normal file colliding against any largefiles.
If a directory matched a regex in hgignore but the files inside the directory
did not match the regex, they would appear as deleted in hg status. This
change fixes them to appear normally in hg status.
Removing the ignore(nf) conditional here is ok because it just means we might
stat more files than we had before. My testing on a large repo shows this
causes no performance regression since the only additional files being stat'd
are the ones that are missing (i.e. status=!), which are generally rare.
This patch resolves a single divergent bookmark if a divergent bookmark exists
in the target revision and it current bookmark is not an ancestor of the target
revision, else it would already be handled by the previous patch in this
series.
Test coverage is added.
This patch resolves divergent bookmarks between the current active bookmark
MARK and the new destination. This situation can arise when pulling new
changesets, abandoning your current changesets actively bookmarked with MARK
via strip, and then doing a bare update. The non-divergent but active bookmark
MARK is then moved to a common ancestor of the new changesets and the abandoned
changesets.
Test coverage is added.
This patch is a follow-up to 00b2764d68e4 that resolves divergent bookmarks
between the to-be-forwarded bookmark MARK and the new descendant. This
situation can happen when pulling new changesets, updating to the divergent
bookmark, abandoning the previous changesets with strip, and then moving MARK
to MARK@N.
Test coverage is added.
Before this patch, tag type information is always updated, even if tag
previously read in has higher priority than one newly read in.
This causes that the tag type is displayed as "local", even if global
tag overwrites existing local one successfully.
This patch updates tag type only if tag node is updated.
This patch tests overwriting local tags below:
- visible one (normal case)
- already removed one (recorded as null)
The fall-back root for walking is the repo root, not no root.
The "roots" do however also end up in m.files() which is used in various ways,
for instance to indicate whether matches are exact. The change could thus have
other impacts.
This patch adds steps to test case-folding collision detection on the
revision tree built up in the order different from the one reproducing
issue3452.
This may prevent regression by changes around "copy detection" and/or
"case-folding collision detection" logic in the future.
Before this patch, case-folding collision detection uses
"copies.pathcopies()" before "manifestmerge()", and is not aware of
renaming in some cases.
For example, in the case of issue3452, "copies.pathcopies()" can't
detect renaming, if the file is renamed at the revision before common
ancestor of merging. So, "hg merge" is aborted unexpectedly on case
insensitive filesystem.
This patch fully rewrites case-folding collision detection, and
relocate it into "manifestmerge()".
New implementation uses list of actions held in "actions" and
"prompts" to build provisional merged manifest up.
Provisional merged manifest should be correct, if actions required to
build merge result up in working directory are listed up in "actions"
and "prompts" correctly.
This patch checks case-folding collision still before prompting for
merge, to avoid aborting after some interactions with users. So, this
assumes that user would choose not "deleted" but "changed".
This patch also changes existing abort message, because sorting before
collision detection changes order of checked files.
This patch refactors "test-casecollision-merge.t" to increase
reusability in succeeding patches.
It is confirmed that changed test also can detect issue3370.
Having the permission to lock the source repo on push is now optional. When the
repo cannot be locked, phase are not changed locally. A status message is issue
when some actual phase movement are skipped:
cannot lock source repo, skipping local public phase update
A debug message with the exact reason of the locking failure is issued in all
case.
"merge.applyupdates()" sorts "actions" in removal first order, and
"workeractions" derived from it should be also sorted.
If each actions in "workeractions" are executed in serial, this
sorting ensures that merging/updating process is collision free,
because updating the file in target context is always executed after
removing the existing file which causes case-folding collision against
the former.
In the other hand, if each actions are executed in parallel, updating
on a worker process may be executed before removing on another worker
process, because "worker.partition()" partitions list of actions
regardless of type of each actions.
This patch divides "workeractions" into removing and updating, and
executes the former first.
This patch still scans "actions"/"workeractions" some times for ease
of patch review, even though large list may cost much in this way.
(total cost should be as same as before)
This also changes some tests, because dividing "workeractions" affects
progress indication.
Before this changeset, navigation generation crashed if revision "0" was
filtered. We introduce a `_first` methods on revision navigation that return the
lowest unfiltered element and use it in two place were the "0" changeset was
explicitly referenced.
Test case are introduced.
For some obscure reason, changelog.node(0) returns nullid if changelog is empty.
this break empty navigation detection. We fix this code by using the length of
the changelog.
Using the length have some issue with revision filtering but this is a small
step in the right direction. Proper fix comes in later changeset.
test-dirstate.t fails on AIX in the absurd date test. AIX touch errors on
any date prior to 1970. AIX mktime() gives an error on such dates, so the
problem is deeper than touch and attempts to work around touch in Python
failed.
Give up. Add an AIX test to hghave and skip the absurd date test on AIX.
After 08202d1ef738 I see:
$ hg id -q
largefiles: repo method 'commit' appears to have already been wrapped by another extension: largefiles may behave incorrectly
largefiles: repo method 'push' appears to have already been wrapped by another extension: largefiles may behave incorrectly
3bd0c95ec1bf
The warning is bad:
* The message gives no hint what the problem is and how it can be resolved.
The message is useless.
* Largefiles do have its share of problems, but I don't think I ever have seen
a problem where this warning would have helped. The 'may' in the warning
seems like an exaggeration of the risk. Having largefiles enabled in
combination with for instance mq, hggit and hgsubversion causes a warning
(depending on the configuration order) but do not cause problems. Extensions
might of course be incompatible, but they can be that in many other ways.
The check and the message are incorrect.
It would thus be better to remove the check and the warning completely.
Before 08202d1ef738 the check always failed. That change made the check work
more like intended ... but the intention was wrong. This change will thus also
back that change out.
Before this patch, "%unset" can't unset values defined in the other
files read in previously, even though online help document says that
it can. It can unset only values defined in the same configuration
file.
For example, the value defined in "~/.hgrc" can't be unset by "%unset"
in ".hg/hgrc" of the repository.
This patch records "%unset"-ed values in "config.parse()", and
discards corresponding values in "config.update()".
Before this patch, there is no test script testing configuration
handling generally. "test-config-case.t" seems to be specific for
testing case sensitive configuration.
This patch renames from "test-config-case.t" to "test-config.t" for
centralization of tests around configuration handling.
The windows and vfat test runs were failing due to read/write permissions not
working the same on those systems. On vfat, permissions can't be changed
at all, and on windows it seems the chmod emulation doesn't remove read
permissions. We could theoretically get the 'cannot write to blacklog.log'
test to pass on windows but there's no #if condition to let us exclude vfat
only.
Verified that test-blackbox passes on windows now.
Expands the rule added in a3f00ef2b622 to include cases where the
address is a line number instead of a regular expression, and fixes an
instance of this pattern in test-unionrepo.t.
BSD sed requires the 'i' command to be followed with a backslash and a
newline, like so:
$ sed -e '/^@/i\
> other'
We've encountered this problem before, e.g. in test-mq.t (215a8789129e).
This change adds a check-code rule and fixes two instances of the
problem in test-record.t.
Previously, colorui assumed that it would only be called when mode wasn't
None. 255b770b2eff changed that, so now colorui needs to care about whether it
should colorize output.
If enabled, log rotation prevents the amount of space used by the
blackbox log from growing without bound. This becomes important in
cases where there are a lot of busy repositories managed by humans
and automation on many machines.
In large deployments, we cannot reasonably track all the repos where
blackbox logs need to be managed, so it is safer to have blackbox
manage its own logs than to move responsibility to an external tool
such as logrotate.
This change adds two configuration keys:
* blackbox.maxsize is the maximum allowable size of the current log
* blackbox.maxfiles is the number of log files to maintain
This allows using a template keyword on calls to the sub function and brings
the function inline with most other semantics of the other template functions.
This change allows setting or deleting multiple bookmarks at once. If more than
one is being set and --inactive is not given, the first one is made active.
This is especially important if extensions that use inotify are enabled,
because it's very easy to hit the inotify max_user_instances limit without
this.