The home of 'Abort' is 'error' not 'util' however, a lot of code seems to be
confused about that and gives all the credit to 'util' instead of the
hardworking 'error'. In a spirit of equity, we break the cycle of injustice and
give back to 'error' the respect it deserves. And screw that 'util' poser.
For great justice.
Python 2.6 introduced the "except type as instance" syntax, replacing
the "except type, instance" syntax that came before. Python 3 dropped
support for the latter syntax. Since we no longer support Python 2.4 or
2.5, we have no need to continue supporting the "except type, instance".
This patch mass rewrites the exception syntax to be Python 2.6+ and
Python 3 compatible.
This patch was produced by running `2to3 -f except -w -n .`.
64e4c6bb733d made 'ui' argument is passed via sslutil.sslkwargs(), but mailer
doesn't call sslkwargs() if smtp.verifycert is off. So we have to put it in
sslkwargs manually.
The mail module only verifies the smtp ssl certificate if 'verifycert' is enabled
(the default). The 'verifycert' can take three possible values:
- 'strict'
- 'loose'
- any "False" value, eg: 'false' or '0'
We tested the validity of the third value, but never converted it to actual
falseness, making 'False' an equivalent for 'loose'.
This changeset fixes it.
Before this patch, port 25 (wellknown port of SMTP) is used as default
port, even if "[smtp] tls" is configured as "smtps".
This patch uses port 465 (wellknown port of SMTPS) as default port, if
"[smtp] tls" is configured as "smtps".
Before this patch, the certificate of the SMTP server for STARTTLS or
SMTPS isn't verified.
This may cause man-in-the-middle security problem (stealing
authentication information), even though SMTP channel itself is
encrypted by SSL.
When "[smtp] tls" is configured as "smtps" or "starttls", this patch:
- uses classes introduced by preceding patches instead of "SMTP" or
"SMTP_SSL" of smtplib, and
- verifies the certificate of the SMTP server, if "[smtp]
verifycert" is configured as other than False
"[smtp] verifycert" can be configured in 3 levels:
- "strict":
This verifies peer certificate, and aborts if:
- peer certification is not valid, or
- no configuration in "[hostfingerprints]" and "[web] cacerts"
This is default value of "[smtp] verifycert" for security.
- "loose":
This verifies peer certificate, and aborts if peer certification is
not valid.
This just shows warning message ("certificate not verified"), if
there is no configuration in "[hostfingerprints]" and "[web]
cacerts".
This is as same as verification for HTTPS connection.
- False(no verification):
Peer certificate is not verified.
This is as same as the behavior before this patch series.
"hg email --insecure" uses "loose" level, and ignores "[web] cacerts"
as same as push/pull/etc... with --insecure.
Ignoring "[web] cacerts" configuration for "hg email --insecure" is
already done in "dispatch._dispatch()" by looking "insecure" up in the
table of command options.
Original "smtplib.SMTP_SSL" has no route to pass "ca_certs" and
"cert_reqs" arguments to underlying SSL socket creation. This causes
that "getpeercert()" on SSL socket returns empty dict, so the peer
certificate for SMTPS can't be verified.
This patch introduces the "SMTPS" class derived from "smtplib.SMTP" to
pass "ca_certs" and "cert_reqs" arguments to underlying SSL socket
creation.
"SMTPS" class is derived directly from "smtplib.SMTP", because amount
of "smtplib.SMTP_SSL" definition derived from "smtplib.SMTP" is as
same as one needed to override it.
This patch defines "SMTPS" class, only when "smtplib.SMTP" class has
"_get_socket()" method, because this makes using SSL socket instead of
normal socket easy.
"smtplib.SMTP" class of Python 2.5.x or earlier doesn't have this
method. Omitting SMTPS support for them is reasonable, because
"smtplib.SMTP_SSL" is already unavailable for them before this patch.
Almost all code of "SMTPS" class is imported from "smtplib.SMTP_SSL"
of Python 2.7.3, but it differs from original code in point below:
- "ssl.wrap_socket()" is replaced by "sslutil.ssl_wrap_socket()" for
compatibility between Python versions
Original "smtplib.SMTP" has no route to pass "ca_certs" and
"cert_reqs" arguments to underlying SSL socket creation. This causes
that "getpeercert()" on SSL socket returns empty dict, so the peer
certificate for STARTTLS can't be verified.
This patch introduces the "STARTTLS" class derived from "smtplib.SMTP"
to pass "ca_certs" and "cert_reqs" arguments to underlying SSL socket
creation.
Almost all code of "starttls()" in this class is imported from
"smtplib.SMTP" of Python 2.7.3, but it differs from original code in
points below:
- "self.ehlo_or_helo_if_needed()" invocation is omitted, because:
- "ehlo_or_helo_if_needed()" is available with Python 2.6 or later, and
- "ehlo()" is explicitly invoked in "mercurial.mail._smtp()"
- "if not _have_ssl:" check is omitted, because:
- "_have_ssl" is available with Python 2.6 or later, and
- same checking is done in "mercurial.sslutil.ssl_wrap_socket()"
- "ssl.wrap_socket()" is replaced by "sslutil.ssl_wrap_socket()" for
compatibility between Python versions
- use "sock.recv()" also as "sock.read()", if "sock" doesn't have
"read()" method
with Python 2.5.x or earlier, "sslutil.ssl_wrap_socket()" returns
"httplib.FakeSocket"-ed object, and it doesn't have "read()"
method, which is invoked via "smtplib.SSLFakeFile".
Currently we only support enabling TLS by using SMTP STARTTLS extension. But
not all the servers support it.
With this patch, user can choose which way to enable TLS:
* Default:
tls = none
port = 25
* To use STARTTLS:
tls = starttls
port = 465
* To use SMTP over SSL:
tls = smtps
port = 465
To keep backward compatibility, when tls = true, we use STARTTLS to enable TLS.
Signed-off-by: Zhigang Wang <w1z2g3@gmail.com>
This adds util.getport(port) which tries to parse port as an int, and
failing that, looks it up using socket.getservbyname(). Thus, the
following will work:
[smtp]
port = submission
[web]
port = http
This does not apply to ports in URLs used in clone, pull, etc.
Adds a new function addrlistencode() to mercurial.mail, like addressencode(),
but accepts a list of addresses as input, and returns a list of formatted
addresses. This will be used by patchbomb.
The difference is that each element in the input list can contain multiple
addresses (comma separated or otherwise), and are split using Python's
email.Utils.getaddresses().
RfC2822 mandates a line length limit of 998 byte + CRLF.
Python mail tools break lines at 990 byte. To prevent
that, we quoted-printable encode overly long lines.
utf-8 can be safely detected without making assumptions on the
encoding/locale used by the recipient.
Content-Transfer-Encoding for utf-8 patches is base64 (default of
python's email module).
- headencode, addressencode: encode headers
- mimeencode: encode message parts not containing patches
- new email config "charsets"
Users may configure email.charsets as a list of charsets they
consider appropriate for the recipients of their outgoing mails.
Conversion is tried in this order:
1. us-ascii
(ascii, us-ascii are removed from email.charsets if present)
2. email.charsets (if present) in order given
3. util._fallbackencoding, util._encoding, utf-8
if not already in email.charsets