cat of a standin would silently fail.
The use of standins is mostly an implementation detail, but it is already a bit
leaking. Being able to see the content of standins might be convenient for
debugging.
Before this patch, "hg outgoing" invokes "findcommonoutgoing()" not
only in "commands.outgoing()" but also in
"overrides.overrideoutgoing()" (via "getoutgoinglfiles()"), when
largefiles is enabled. The latter is redundant.
This patch uses "outgoinghooks" to avoid redundant outgoing check.
Newly introduced function "overrides.outgoinghook()" is registered
into "outgoinghooks" to get the result of outgoing check in
"commands.outgoing()".
It invokes "lfutil.getlfilestoupload()" directly with the result of
outgoing check to avoid redundant outgoing check in
"getoutgoinglfiles()": "sort()" is needed, because
"lfutil.getlfilestoupload()" doesn't sort the result of it.
This patch also omits "if toupload is None" ("No remote repo") case,
because failure of looking remote repository up should raise exception
in "commands.outgoing()" before invocation of "outgoinghooks".
Newly added "hg outgoing --large --graph" tests examine
"outgoinghooks" invocations in "hg outgoing --graph" code path.
Before this patch, "hg summary --remote --large" invokes
"findcommonoutgoing()" not only in "commands.summary()" but also in
"overrides.overridesummary()" (via "getoutgoinglfiles()"). The latter
is redundant.
This patch uses "summaryremotehooks" to avoid redundant outgoing check.
Newly introduced function "overrides.summaryremotehook()" is
registered into "summaryremotehooks" to get the result of outgoing
check in "commands.summary()".
It invokes "lfutil.getlfilestoupload()" directly with the result of
outgoing check to avoid redundant outgoing check in
"getoutgoinglfiles()".
Before this patch, "overrides.getoutgoinglfiles()" (called by
"overrideoutgoing()" and "overridesummary()") and "lfilesrepo.push()"
implement similar logic to get outgoing largefiles separately.
This patch centralizes the logic to get outgoing largefiles in
"lfutil.getlfilestoupload()".
"lfutil.getlfilestoupload()" takes "addfunc" argument, because each
callers need different information (and it is useful for enhancement
in the future).
- "overrides.getoutgoinglfiles()" needs only filenames
- "lfilesrepo.push()" needs only hashes of largefiles
The largefile hashes are mostly an implementation detail, but they are "leaked"
in several places anyway, and showing the hashes is better than not giving the
user any information about the options in the prompt.
The hashes are long, but it is largefile hashes and it would thus be confusing
to shorten them.
Before it tried to explain the exact situation when merging moved largefiles.
That do not happen for normal merges and is not more relevant for largefiles
than for normal files. It is unneeded complexity - remove it.
a8386b4c47b1 introduced splitstandin on all action filenames. It would however
crash on 'd' actions where the filename is None.
Fix that and add test coverage for that case.
Prompts like
foo has been turned into a largefile
use (l)argefile or keep as (n)ormal file?
was not as clear as the usual prompts that use 'remote' or 'local' to explain
what happened on which side ... especially not when used to the normal prompts.
"as" could also indicate that it would be possible to take the content of the
largefile and somehow put it into the normal file. It could make it more clear
that it was a choice between one side or the other.
For consistency we will now phrase it like:
remote turned local normal file f into a largefile
use (l)argefile or keep (n)ormal file?
We used to get like:
$ hg up -r 2
foo has been turned into a normal file
keep as (l)argefile or use (n)ormal file? l
getting changed largefiles
0 largefiles updated, 0 removed
0 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ cat foo
cat: foo: No such file or directory
[1]
- which both asked the wrong question and did the wrong thing.
Instead, skip this conflict resolution when the local conflicting file has been
scheduled for removal and there thus is no conflict.
Before this patch, largefiles extension checks unknown files in the
working directory always case sensitively.
This causes failure in updating from the revision X consisting of
'.hglf/A' (and "A" implicitly) to the revision Y consisting of 'a'
(not ".hglf/A") on case insensitive filesystem, because "A" in the
working directory is treated as colliding against and different from
'a' on the revision Y.
This patch uses "repo.dirstate.normalize()" to check unknown files
with case awareness of the filesystem.
This goes a step further than 974959d637b7 and backs out the unreleased
--cache-largefiles option. The same can be achieved with --lfrev heads(pulled()) and
we shouldn't introduce unnecessary command line options.
The revset will be evaluated after the changesets has been pulled, and missing
largefiles from matching revisions will be pulled to the local caches.
This in combination with revsets will make it possible to specify different
strategies for pulling largefiles.
The revset expressions used for this option might be quite complex and will
probably be most useful from scripts or an alias ... but less complicated than
configuring hooks.
We were calling back to the original commands.cat from inside the walk loop
that handled and filtered out largefiles. That did however happen with file
paths relative to repo root and the original cat would fail when it applied its
own walk and match on top of that.
Instead we now duplicate and modify the code from commands.cat and patch it to
handle both normal and largefiles.
A change in test output shows that this also makes the exit code with
largefiles consistent with the normal one in the case where one of several
specified files are missing.
This also fixes the combination of --output and largefiles.
Upcoming patches will speed dirstate.walk up by not filtering based on the
match function when match.always() is True. For that to work, match.always()
needs to be accurate. Previously it wasn't so for largefiles.
lfutil.splitstandin(f) can be None, and we query the dirstate for that without
checking if it is. This will cause problems with the upcoming move to critbit-
based dicts, since they only support strings as keys.
When a series of commits first adds a file and then removes it,
hg rebase --collapse prompts whether to keep the file or delete it. This is
due to it reusing the branch merge code. In a noninteractive terminal it
defaults to keeping the file, which results in a collapsed commit that is
has a file that should be deleted. This bug resulted in developers accidentally
commiting unintentional changes to our repo twice today, so it's fairly
important to get fixed.
This change allows rebase --collapse to tell the merge code to accept the
latest version every time without prompting.
Adds a test as well.
cachelfiles jumped through loops to handle merges and modified files ... but it
did apparently no longer have a valid reason to do so. It should just always
make sure that the largefiles referenced from the standins are present - no
matter which actual largefile is stored in the working directory. If there is
no standin then there is nothing to fetch.
The old code usually verified the hash of all largefiles every time this
function was invoked - for examply by 'update'.
This change makes a trivial noop update 5-10 seconds faster on our repo (with
the other 50% spent doing another unnecessary hashing of all largefiles).
Test output is changed in a case where one revision was pulled, but because of
the off-by-one error it thought that 0 revisions were pulled ... and because of
another bug it thus (tried to) fetch largefiles for all revisions.
After this change it no longer reports failure when it failed while trying to
fetch largefiles it shouldn't fetch. Largefiles that it shouldn't fetch but
managed to fetch anyway will now correctly be missing later on.
This change thus resolves some of unexplained test output introduced in
8664d9900884.
After discussion, we've agreed that largefiles for newly pulled heads should
not be cached by default. The use case for this is using largefiles repos
with multiple remote servers (and therefore multiple remote largefiles caches),
where users will be pulling from non-default locations on a regular basis. We
think this use case will be significantly less common than the use case where
all largefiles are stored on the same central server, so the default should be
no caching.
The old behavior can be obtained by passing the --cache-largefiles flag to
pull.
Override updaterepo() instead of individual methods that may not be called for
each subrepo. Add test.
Based on patch from Matt Harbison.
Changes the order of update-related messages (now largefiles comes before the
global status).
In some cases, caching largefiles may take a long time (if the user has
pulled a lot of new heads). This patch makes it more clear what is happening,
by showing the number of heads we are caching largefiles for.
The slightly obscure --lfa and --lfc only worked as modifiers to --large and
could be combined. The documentation was however not clear what they did.
Instead they now imply --large and the description is updated.
Show messages at a point where the actions have been sorted, thus preparing for
backout of 14f4258e3526.
This makes manifestmerge more of a silent operation, just like 'copies' is.
Indent 'preserving' messages to make them subordinate to the action logging so
they fit in the new context. (The 'preserving' messages are quite redundant and
could also be removed completely.)