When using bundle2, the phase pushkey parts are now made mandatory. As a
result, failure to update the bookmark server side will result in the transaction
being aborted.
The current behavior (with bundle1) is to let the rest of the push succeed if
the pushkey call (phases, bookmarks) failed (this comes from the fact that each
item is sent in its own command).
We kept this behavior with bundle2, which is highly debatable, but let us keep
thing as they are now as a start. We are about to enforce 'mandatory' pushkey
part as 'mandatory' successful, so we need to marks parts as advisory to
preserve the current (debatable) behavior.
.hgtags fnodes cache entries can be expensive to compute, especially
if there are hundreds of even thousands of them. This patch implements
support for receiving a bundle2 part that contains a mapping of
changeset to .hgtags fnodes.
An upcoming patch will teach the server to send this part, allowing
clients to bypass having to redundantly compute these values.
A number of tests changed due to the client advertising the "hgtagsfnodes"
capability.
This test makes extensive use of --debug so moving to bundle2 based exchange
has a massive impact. We do it early to reduce the noise create by a future
usage of bundle2 as the default protocol.
When the progress extension is not enabled, each call to 'ui.progress' used to
issue a debug message. This results is a very verbose output and often redundant
in tests. Dropping it makes tests less volatile to factor they do not meant to
test.
We had to alter the sed trick in 'test-rename-merge2.t'. Sed is used to drop all
output from a certain point and hidding the progress output remove its anchor.
So we anchor on something else.
A future patch is going to add some extra commented-out boilerplate to
the top of .hg/hgrc during clone. In order to make this test not
require regular updates, switch to searching for [hooks] or [acl] and
print file from the first match to that pattern.
The discovery of necessary bookmark updates is now done within the "discovery
phase". This opens the door to the inclusion of bookmarks in a unified bundle2
push.
This input will have to travel over the wire anyway, so we feed the peer method
with a simple binary stream and rely on the server side to use `readbundle`
to create the python object.
The test output changes because the bundle is created marginally sooner and the
debug output interleaves in a different way.
Localrepo now supports the unbundle method of pushing changegroups. We
plan to use the unbundle call for bundle2 so it is important that all
peers supports it. The `peer.unbundle` and `peer.addchangegroup` code
path have small difference so cause some test output changes. None of those
changes seems problematic.
The strip code used a trick to lower the cost of branchcache update after a
strip. However is less necessary since we have branchcache collaboration.
Invalid branchcache are likely to be cheaply rebuilt again a near subset of the
repo.
Moreover, this trick would need update to be relevant in the now filtered
repository world. It currently update the unfiltered branchcache that few people
cares about. Make it smarter on that aspect would need complexes update of the
calling logic
So this mechanism is:
- Arguably needed,
- Currently irrelevant,
- Hard to update
and I'm dropping it.
We now update the branchcache in all case by courtesy of the read only reader.
This changeset have a few expected impact on the testsuite are different cache
are updated.
Now that changelog filtering is in place, it's become evident that
naming the filters according to the set of revs _not_ included in the
filtered changelog is confusing. This is especially evident in the
collaborative branch cache scheme.
This changes the names of the filters to reflect the revs that _are_
included:
hidden -> visible
unserved -> served
mutable -> immutable
impactable -> base
repoview.filteredrevs is renamed to filterrevs, so that callers read a
bit more sensibly, e.g.:
filterrevs('visible') # filter revs according to what's visible
It filters all mutable changesets, leaving only public changeset unfiltered.
This filtering set is expected to be much more stable that the previous one as
public changeset are unlikely to disapear.
The only official use of this filter is for branchcache.
Filtered repository are *subset* of unfiltered repository. This means that a
filtered branchmap could be use to compute the unfiltered version.
And filtered version happen to be subset of each other:
- "all() - unserved()" is a subset of "all() - hidden()"
- "all() - hidden()" is a subset of "all()"
This means that branchmap with "unfiltered" filter can be used as a base for
"hidden" branchmap that itself could be used as a base for unfiltered
branchmap.
unserved < hidden < None
This changeset implements this mechanism. If the on disk branchcache is not valid
we use the branchcache of the nearest subset as base instead of computing it from
scratch. Such fallback can be cascaded multiple time is necessary.
Note that both "hidden" and "unserved" set are a bit volatile. We will add more
stable filtering in next changesets.
This changeset enables collaboration between no filtering and "unserved"
filtering. Fixing performance regression introduced by 7bff5f37cb97
Disables this simple optimisation to allow coming more powerfull approach: cache
collaboration.
Our goal is to have branchcache collaborate. This means that unfiltered
branchcache will fallback to some filtered branchcache if invalid. We can't have
the filtered branchcache to use the unfiltered one. That would loop.
The "!" prefix allows you to prevent anyone except a given user or group to push
changesets in a given branch or path.
This patch enables a use case suggested by a user (Julien Bonnet):
There's a branch that only a given user (or group) should be able to push to,
and you don't want to restrict access to any other branch that may be created.
With the "!" prefix, you simply deny access to "!givenuser" (or "!@givengroup").
If the working dir parent was destroyed by rollback, then the old
behaviour is perfectly reasonable: restore dirstate, branch, and
bookmarks. That way the working dir moves back to an existing
changeset rather than becoming an orphan.
But if the working dir parent was unaffected -- say, you updated to an
older changeset and then did rollback -- then it's silly to restore
dirstate and branch. So don't do that. Leave the status of the working
dir alone. (But always restore bookmarks, because that file refers to
changeset IDs that may have been destroyed.)
Adds a new discovery method based on repeatedly sampling the still
undecided subset of the local node graph to determine the set of nodes
common to both the client and the server.
For small differences between client and server, it uses about the same
or slightly fewer roundtrips than the old tree-based discovery. For
larger differences, it typically reduces the number of roundtrips
drastically (from 150 to 4, for instance).
The old discovery code now lives in treediscovery.py, the new code is
in setdiscovery.py.
Still missing is a hook for extensions to contribute nodes to the
initial sample. For instance, Augie's remotebranches could contribute
the last known state of the server's heads.
Credits for the actual sampler and computing common heads instead of
bases go to Benoit Boissinot.
This speeds up the in-memory version of debugbuilddag that I'm
working on considerably for the case where we want to build just
a 00changelog.i (for discovery tests, for instance).
There are a couple of test changes because node ids in tests
have changed.
The changes to the patch names in test-mq-qdelete.t were required
because they could collide with nodeid abbreviations and newly
actually do (patch "c" collides with id "cafe..." for patch "b").
This is a long desired cleanup and paves the way for new discovery.
To specify subsets for bundling changes, all code should use the heads
of the desired subset ("heads") and the heads of the common subset
("common") to be excluded from the bundled set. These can be used
revlog.findmissing instead of revlog.nodesbetween.
This fixes an actual bug exposed by the change in test-bundle-r.t
where we try to bundle a changeset while specifying that said changeset
is to be assumed already present in the target. This used to still
bundle the changeset. It no longer does. This is similar to the bugs
fixed by the recent switch to heads/common for incoming/pull.
Previously, when rolling back a transaction, some users could be confused
between the level to which the store is rolled back, and the new parents
of the working directory.
$ hg rollback
rolling back to revision 4 (undo commit)
With this change:
$ hg rollback
repository tip rolled back to tip revision 4 (undo commit)
working directory now based on revision 2 and 1
So now the user can realize that the store has been rolled back to an older
tip, but also that the working directory may not on the tip (here we are
rolling back the merge of the heads 2 and 1)
This uses the same strategy as progress for pulls, estimating manifests
based on changeset count and estimating file count by files list in
each changeset.
When issuing `hg pull -r REV` in a repo with no common ancestor with the
remote repo, the message 'requesting all changes' is printed, even though only
the changese that are ancestors of REV are actually requested. This can be
confusing for users (see
http://www.selenic.com/pipermail/mercurial/2010-October/035508.html).
This silences the message if (and only if) the '-r' option was passed.