We already have a ":" after the user name to denote the start of the
description. The current usage of quotes around the description is
problematic as the truncation to 80 chars is likely to drop the
closing quote. This may confuse syntax coloration in some editors.
Before this patch, 'hg fetch' may cause unexpected conflict, if 'hg
fetch'-ed changes are located near lines in which keywords are
embedded, because keywords are substituted with other strings in the
working directory.
This patch suppresses keyword expansion while 'hg fetch' for internal
merge by adding 'fetch' to 'restricted' command list like 'merge'.
This patch uses 'hg import' to safely create the new head to be merged
at succeeding 'hg fetch', because:
- branch of revision #10 is different from one of #11 in 'Test'
repository, so just 'hg fetch -r 11' doesn't cause merging between
them
this means the new head should be created manually.
- 'hg import' is easier and safer than 'cat <<EOF' and 'hg commit'
to replay same changes including special characters like '$'
safeness of 'hg import' with keyword extension is already examined
in 'test-keyword.t'.
Before this patch, 'hg histedit' may cause unexpected conflict, if 'hg
histedit'-ed changes are located near lines in which keywords are
embedded, because keywords are substituted with other strings in the
working directory.
This patch suppresses keyword expansion while 'hg histedit' for
internal merge by adding 'histedit' to 'restricted' command list like
'merge'.
Test in this patch just swaps order of revision #13 and #14: this is
enough to cause internal merge.
Before this patch, 'hg backout' may cause unexpected conflict, if 'hg
backout'-ed changes are located near lines in which keywords are
embedded, because keywords are substituted with other strings in the
working directory.
This patch suppresses keyword expansion while 'hg backout' for
internal merge by adding 'backout' to 'restricted' command list like
'merge'.
Before this patch, 'hg graft' may cause unexpected conflict, if 'hg
graft'-ed changes are located near lines in which keywords are
embedded, because keywords are substituted with other strings in the
working directory.
This patch suppresses keyword expansion while 'hg graft' for internal
merge by adding 'graft' to 'restricted' command list like 'merge'.
Before this patch, 'hg rebase' may cause unexpected conflict, if 'hg
rebase'-ed changes are located near lines in which keywords are
embedded, because keywords are substituted with other strings in the
working directory.
This patch suppresses keyword expansion while 'hg rebase' for internal
merge by adding 'rebase' to 'restricted' command list like 'merge'.
This patch specifies '--keep' to 'hg rebase', because revision #10 is
useful also for tests in succeeding patches.
Before this patch, 'hg unshelve' may cause unexpected conflict, if 'hg
unshelve'-ed changes are located near lines in which keywords are
embedded, because keywords are substituted with other strings in the
working directory.
This patch suppresses keyword expansion while 'hg unshelve' for
internal merge by adding 'unshelve' to 'restricted' command list like
'merge'.
Adds a conflict marker formatter that can produce custom conflict marker
descriptions. It can be set via ui.mergemarkertemplate. The old behavior
can be used still by setting ui.mergemarkers=basic.
The default format is similar to:
{node|short} {tag} {branch} {bookmarks} - {author}: "{desc|firstline}"
And renders as:
contextblahblah
<<<<<<< local: c7fdd7ce4652 - durham: "Fix broken stuff in my feature branch"
line from my changes
=======
line from the other changes
>>>>>>> other: a3e55d7f4d38 master - sid0: "This is a commit to master th...
morecontextblahblah
'export' is the official export format and used by patchbomb, but it would only
show date as a timestamp that most humans might find it hard to relate to. It
would be very convenient when reviewing a patch to be able to see what
timestamp the patch will end up with.
Mercurial has always used util.parsedate for parsing these headers. It can
handle 'all' date formats, so we could just as well use a readable one.
'export' will now use the format used by 'log' - which is the format described
as 'Unix date format' in the templating help. We assume that all parsers of '#
HG changeset patch'es can handle that.
The strip code used a trick to lower the cost of branchcache update after a
strip. However is less necessary since we have branchcache collaboration.
Invalid branchcache are likely to be cheaply rebuilt again a near subset of the
repo.
Moreover, this trick would need update to be relevant in the now filtered
repository world. It currently update the unfiltered branchcache that few people
cares about. Make it smarter on that aspect would need complexes update of the
calling logic
So this mechanism is:
- Arguably needed,
- Currently irrelevant,
- Hard to update
and I'm dropping it.
We now update the branchcache in all case by courtesy of the read only reader.
This changeset have a few expected impact on the testsuite are different cache
are updated.
The `commitctx` and `addchangegroup` methods of repo upgrade branchcache after
completion. This behavior aims to keep the branchcache in sync for read only
process as hgweb. See b4909adfc093 for details.
Since changelog filtering is used, those calls only update the cache for unfiltered repo.
One of no interest for typical read only process like hgweb.
Note: By chance in basic case, `repo.unfiltered() == repo.filtered('unserved')`
This changesets have the "unserved" cache updated instead. I think this is the
only cache that matter for hgweb.
We could imagine updating all possible branchcaches instead but:
- I'm not sure it would have any benefit impact. It may even increase the odd of
all cache being invalidated.
- This is more complicated change.
So I'm going for updating a single cache only which is already better that
updating a cache nobody cares about.
This changeset have a few expected impact on the testsuite are different cache
are updated.
Now that changelog filtering is in place, it's become evident that
naming the filters according to the set of revs _not_ included in the
filtered changelog is confusing. This is especially evident in the
collaborative branch cache scheme.
This changes the names of the filters to reflect the revs that _are_
included:
hidden -> visible
unserved -> served
mutable -> immutable
impactable -> base
repoview.filteredrevs is renamed to filterrevs, so that callers read a
bit more sensibly, e.g.:
filterrevs('visible') # filter revs according to what's visible
The dispatch code now enables filtering of "hidden" changesets globally. The
filter is installed before command and extension invocation. The `--hidden`
switch is now global and disables this filtering for any command.
Code in log dedicated to changeset exclusion is removed as this global filtering
has the same effect.
It filters all mutable changesets, leaving only public changeset unfiltered.
This filtering set is expected to be much more stable that the previous one as
public changeset are unlikely to disapear.
The only official use of this filter is for branchcache.
Filtered repository are *subset* of unfiltered repository. This means that a
filtered branchmap could be use to compute the unfiltered version.
And filtered version happen to be subset of each other:
- "all() - unserved()" is a subset of "all() - hidden()"
- "all() - hidden()" is a subset of "all()"
This means that branchmap with "unfiltered" filter can be used as a base for
"hidden" branchmap that itself could be used as a base for unfiltered
branchmap.
unserved < hidden < None
This changeset implements this mechanism. If the on disk branchcache is not valid
we use the branchcache of the nearest subset as base instead of computing it from
scratch. Such fallback can be cascaded multiple time is necessary.
Note that both "hidden" and "unserved" set are a bit volatile. We will add more
stable filtering in next changesets.
This changeset enables collaboration between no filtering and "unserved"
filtering. Fixing performance regression introduced by 7bff5f37cb97
When commit is followed by strip (qrefresh), phasecache contains nodes that were
removed from the changelog. Since phasecache is filecached with .hg/store/phaseroots
which doesn't change as a result of stripping, we have to filter it manually.
If we don't write it immediately, the next time it is read from disk the nodes
will be filtered again. That's what happened before, but there's no reason not
to write it immediately.
The change in test-keyword.t is caused by the above.
At this moment, the cache is invalid, and will be thrown away.
Later the strip function will call the `localrepo.destroyed` method
that will update the branchmap cache.
In several place, We check if a branchcache is still valid regarding the current
state of the repository. This changeset puts this logic in a method of the object
that can be reused when necessary.
A branch map is considered valid whenever it is up to date or a strict subset of
the repository state.
The change will help making branchcache aware of filtered revision.
The change in keyword is expected. the branch cache is actually invalid after
the amend. The previous check did not detected it.
Obsolescence cycle are bad and should be avoided as much as possible. The
current amend implemented touch changeset meta data as few as possible. This
make is easy for amend to result in the same node than a precursors. We add some
deterministic noise in extra to avoid this. In practice, the hex of the amended
changeset is stored in 'amend_source' extra key.
The recently introduced message was:
no unresolved files; you may continue your unfinished operation
This had three problems:
- looks a bit like an error message because it's not saying "we've
just resolved the last file"
- refers to "unfinished operation", which won't be the case with
"update" or "merge"
- introduces semicolons to error messages, which is stylistically
questionable
I've simplified this to:
no more unresolved files
In the future, if we want to prompt someone to continue a particular operation, we should use
a hint style:
no more unresolved files
(use 'hg graft --continue' to finish grafting)
When using resolve, users often have to consult with the output of |hg
resolve -l| to see if any unresolved files remain. This step is tedious
and adds overhead to resolving.
This patch will notify a user if there are no unresolved files remaining
after executing |hg resolve|::
no unresolved files; you may continue your unfinished operation
The patch stops short of telling the user exactly what command should be
executed to continue the unfinished operation. That is because this
information is not currently captured anywhere. This would make a
compelling follow-up feature.
Timezone offsets of less than a minute is not shown but can cause displayed
dates to be before epoch start - and dates before epoch start is not shown
correctly on Windows (see also e68101a876a4).
These 'negative' dates could be considered undefined behaviour so we don't care
and swap the tests values for timestamp and timezone.
get-with-headers.py took the http GET parameter as a command line parameter
that had to start with '/'. MSYS on windows will mangle such paths.
Instead of applying a workaround everywhere (such as an extra '/') we let
get-with-headers.py add the mandatory '/'. That is consistent with the
url path handling in the Mercurial url class.
A few tests sent 'GET ?cmd=...' which is invalid. They will now send 'GET
/?cmd=...'.
This will not enable any tests for being run on windows - only remove one
reason they were disabled.
Many tests didn't change back from subdirectories at the end of the tests ...
and they don't have to. The missing 'cd ..' could always be added when another
test case is added to the test file.
This change do that tests (99.5%) consistently end up in $TESTDIR where they
started, thus making it simpler to extend them or move them around.
This function augments strip to incrementally update the branchheads cache
rather than recompute it from scratch. This speeds up the performance of strip
and rebase on repos with long history. The performance optimization only
happens if the revisions stripped are all on the same branch and the parents of
the stripped revisions are also on that same branch.
This adds a few test cases, particularly one that reproduces the extra heads
that mpm observed.
Calling strip() will eventually trigger localrepo.destroyed() which will
invalidate _parseroots. It will call filterunknown() upon reload.
Changes to test-keyword.t are related to commit --debug running after
either qpop or rollback.
It is possible that unrelated changes in a file are on sequential lines. The
current record extension does not allow these to be committed independently.
An example use case for this is in software development for deeply embedded
real-time systems. In these environments, it is not always possible to use a
debugger (due to time-constraints) and hence inline UART-based printing is
often used. When fixing a bug in a module, it is often convenient to add a
large number of 'printf's (linked to the UART via a custom fputc) to the module
in order to work out what is going wrong. printf is a very slow function (and
also variadic so somewhat frowned upon by the MISRA standard) and hence it is
highly undesirable to commit these lines to the repository. If only a partial
fix is implemented, however, it is desirable to commit the fix without deleting
all of the printf lines. This is also simplifies removal of the printf lines
as once the final fix is committed, 'hg revert' does the rest. It is likely
that the printf lines will be very near the actual fix, so being able to split
the hunk is very useful in this case.
There were two alternatives I considered for the user interface. One was to
manually edit the patch, the other to allow a hunk to be split into individual
lines for consideration. The latter option would require a significant
refactor of the record module and is less flexible. While the former is
potentially more complicated to use, this is a feature that is likely to only
be used in certain exceptional cases (such as the use case proposed above) and
hence I felt that the complexity would not be a considerable issue.
I've also written a follow-up patch that refactors the 'prompt' code to base
everything on the choices variable. This tidies up and clarifies the code a
bit (removes constructs like 'if ret == 7' and removes the 'e' option from the
file scope options as it's not relevant there. It's not really a necessity, so
I've excluded it from this submission for now, but I can send it separately if
there's a desire and it's on bitbucket (see below) in the meantime.
Possible future improvements include:
* Tidying up the 'prompt' code to base everything on the choices variable.
This would allow entries to be removed from the prompt as currently 'e' is
offered even for entire file patches, which is currently unsupported.
* Allowing the entire file (or even multi-file) patch to be edited manually:
this would require quite a large refactor without much benefit, so I decided
to exclude it from the initial submission.
* Allow the option to retry if a patch fails to apply (this is what Git does).
This would require quite a bit of refactoring given the current 'hg record'
implementation, so it's debatable whether it's worth it.
Output is similar to existing record user interface except that an additional
option ('e') exists to allow manual editing of the patch. This opens the
user's configured editor with the patch. A comment is added to the bottom of
the patch explaining what to do (based on Git's one).
A large proportion of the changeset is test-case changes to update the options
reported by record (Ynesfdaq? instead of Ynsfdaq?). Functional changes are in
record.py and there are some new test cases in test-record.t.
Since c06eb45e85a7, mq saves the nodeid of the first applied patch to
cache/branchheads, which breaks the optimized cache handling introduced in
1808e27e1362. The problem is the revision being committed is appended to
mqrepo.applied after the commit succeeds, which means mqrepo._branchtags()
performs a regular update and write the first applied patch to the branch
cache.
One solution is to set a context variable _committingpatch on the mqrepo while
it is committing a patch and to take it in account when deciding to fast-path
mqrepo._branchtags(). Not really elegant but it works.
The changes to test-mq-caches.t reverse changes introduced by c06eb45e85a7. The
cache should not have been updated with mq records.
The changes to test-keyword.t are indirectly caused by c06eb45e85a7.
Reported and analyzed by Yuya Nishihara <yuya@tcha.org>
Notes:
- qpush still makes a slow path _branchtags() call when checking heads. Maybe
this can be optimized.
- be careful when merging this patch in default as secretcommit() was renamed
newcommit() right after the end of the code freeze.
printf on AIX default shell ksh (89) says \1 is an invalid escape. It insists
on at least 2 digits. This causes failures in test-keyword.t and test-status.t.
check-code.py already looks out for \NNN and recommends using Python
for outputting octal values. Extend the check to \NN and \N and fix up
resulting failures.
