Summary:
Now that all our repos are treemanifest, let's enable the extension by
default in tests. Once we're certain no one needs it in production we'll also
make it the default in core Mercurial.
This diff includes a minor fix in treemanifest to be aware of always-enabled
extensions. It won't matter until we actually add treemanifest to the list of
default enabled extensions, but I caught this while testing things.
Reviewed By: ikostia
Differential Revision: D15030253
fbshipit-source-id: d8361f915928b6ad90665e6ed330c1df5c8d8d86
Summary:
Disable parsing `.hgignore` and related fileset `hgignore()` by default. They can
still be enabled via configuration. The plan is to completely remove them
later.
A replacement for `hgignore()` fileset was added as `gitignore()`.
The `hgignore()` fileset seems to be only used by zertosh in the past 3 months.
Reviewed By: singhsrb
Differential Revision: D14543232
fbshipit-source-id: f2385062a0e816331f693239f62448979876078a
Summary: Also change the internal API so it no longer accepts the "heads" argument.
Reviewed By: ryanmce
Differential Revision: D6745865
fbshipit-source-id: 368742be49b192f7630421003552d0a10eb0b76d
Upon pull or unbundle, we display a message with the range of new revisions
fetched. This revision range could readily be used after a pull to look out
what's new with 'hg log'. The algorithm takes care of filtering "obsolete"
revisions that might be present in transaction's "changes" but should not be
displayed to the end user.
Currently when we have multiple heads on the same branch, update tells us that
there some more heads for the current branch but does not tells us the head to
which the repository has been updated to. It makes more sense showing the
head we updated to and then telling there are some more heads.
This is a fix for a regression introduced by the patches for issue4028.
The test changes are due to us doing fewer _checkcopies searches now, which
makes some test outputs revert to the pre-issue4028 behavior. That issue itself
remains fixed, we only skip copy tracing for files where it isn't relevant.
As a nice side effect, this makes copy detection much faster when tracing
backwards through lots of renames.
As a followup to the issue4028 series, this fixes a variant of the issue
that can occur when updating with uncommited local changes.
The duplicated .hgsub warning is coming from wc.dirty(). We would previously
skip this call because it's only relevant when we're going to perform copy
tracing, which we didn't do before.
The change to the update summary line is because we now treat the rename as a
proper rename (which counts as a change), rather than an add+delete pair
(which counts as a change and a delete).
Bare 'hg update' now brings you to the tipmost descendant (on the same branch).
Leaving the user on the same topological branch. The previous behavior, updating
to the tipmost changeset on the same branch could lead to jump from a
topological branch to another. This was confusing and impractical. As the only
conceivable reason for the old behavior have been address by the recently
introduce message about other heads, we can "safely" change this behavior
All test changes have been reviewed and seen a valid consequences.
We perform all that we can non-interactively before prompting the user for input
via their merge tool. This allows for a maximally consistent state when the user
is first prompted.
The test output changes indicate the actual behavior change happening.
This means that in ms.resolve we must call merge after calling premerge. This
doesn't yet mean that all premerges happen before any merges -- however, this
does get us closer to our goal.
The output differences are because we recompute the merge tool. The only
user-visible difference caused by this patch is that if the tool is missing
we'll print the warning twice. Not a huge deal, though.
When the progress extension is not enabled, each call to 'ui.progress' used to
issue a debug message. This results is a very verbose output and often redundant
in tests. Dropping it makes tests less volatile to factor they do not meant to
test.
We had to alter the sed trick in 'test-rename-merge2.t'. Sed is used to drop all
output from a certain point and hidding the progress output remove its anchor.
So we anchor on something else.
The '~' in the bug report is being expanded to a path with Windows style slashes
before being passed to shellquote() via util.shellquote(). But shlex.split()
strips '\' out of the string, leaving an invalid path in dispatch.aliasargs().
This regressed in 72640182118e.
For now, the tests need to be conditionalized for Windows (because those paths
are quoted). In the future, a more complex regex could probably skip the quotes
if all component separators are double '\'. I opted to glob away the quotes in
test-rename-merge2.t and test-up-local-change.t (which only exist on Windows),
because they are in very large blocks of output and there are way too many diffs
to conditionalize with #if directives. Maybe the entire path should be globbed
away like the following paths in each changed line. Or, letting #if directives
sit in the middle of the output as was mentioned a few months back would work
too.
Unfortunately, I couldn't figure out how to test the specific bug. All of the
'hg serve' tests have a #require serve declaration, causing them to be skipped
on Windows. Adding an alias for 'expandtest = outgoing ~/bogusrepo' prints the
repo as '$TESTTMP/bogusrepo', so the test runner must be changing the
environment somehow.
The "nothing to merge" case is covered by test-merge-default.t.
The "uncommitted changes" case is covered by test-merge1.t (and
others).
The "merge -f" case is covered by test-merge-force.t.
When looking for untracked files that would conflict with a tracked
file in the target revision (or the remote side of a merge), we
explcitly exclude ignored files. The code was added in f1db75422e70
(merge: refactor unknown file conflict checking, 2012-02-09), but it
seems like only unknown, not ignored, files were considered since the
beginning of time.
Although ignored files are mostly build outputs and backup files, we
should still not overwrite them. Fix by simply removing the explicit
check.
We don't seem to have any tests for updating to another revision when
there are untracked files on the local side that conflict with the
those on the remote side, so let's add tests. This shows how we
overwrite untracked ignored files when updating to a revision that
tracks the file.
When 'f' is not in 'ma', 'a' will be 'nullid' and all the if/elif
conditions that check whether some one nodeid is equal to 'a' will
fail, and the else-clause will instead apply. We can make that more
explicit by creating a separate 'm' action for the case where 'a' is
'nullid'. While it does mean copying some code, perhaps it makes it a
little clearer which codepaths are possible, and which cases the
"Note:" in the code refers to. It also lets us make the debug action
messages a little more specific.
Preparing for action list split-up, making sure the final change don't have any
test changes.
The patch moves debug statements around without really changing anything.
Arguably, it temporarily makes the code worse. The only justification is that
it makes it easier to review the test changes ... and in the end the big change
will not change test output at all.
The changes to test output are due to changes in the ordering of debug output.
That is mainly because we now do the debug logging for files when we actually
process them. Files are also processed in a slightly different but still
correct order. It is now primarily ordered by action type, secondarily by
filename.
The patch introduces some redundancy. Some of it will be removed again, some of
it will in the end help code readability and efficiency. It is possible that we
later on could introduce a "process this action list and do some logging and
progress reporting and apply this function".
The "preserving X for resolve" debug statements will only have single space
indentation. It will no longer have a leading single space indented "f: msg ->
m" message. Having this message double indented would thus no longer make
sense.
The bid actions will temporarily be sorted using a custom sort key that happens
to match the sort order the simplified code will have in the end.
The ordering of actions matters. Normal file system semantics is that files
have to be removed before a directory with the same name can be created.
Before the first ordering key was to have 'r' and 'f' actions come first,
secondary key was the filename.
Because of future refactorings we want to consistently have all action types
(with a sensible priority) as separate first keys. Grouped by action type, we
sort by filename.
Not processing in strict filename order could give worse performance,
especially on spinning disks. That is however primarily an issue in the cases
where "all" actions are of the same kind and will be grouped together anyway.
Show messages at a point where the actions have been sorted, thus preparing for
backout of 14f4258e3526.
This makes manifestmerge more of a silent operation, just like 'copies' is.
Indent 'preserving' messages to make them subordinate to the action logging so
they fit in the new context. (The 'preserving' messages are quite redundant and
could also be removed completely.)
Many tests didn't change back from subdirectories at the end of the tests ...
and they don't have to. The missing 'cd ..' could always be added when another
test case is added to the test file.
This change do that tests (99.5%) consistently end up in $TESTDIR where they
started, thus making it simpler to extend them or move them around.
Makes the 'nothing to merge' abort messages in commands.py consistent with
those in merge.py. Also makes commands.merge() and merge.update() use hints.
The tests show the changes.
When using "hg update" to update to a revision on another branch, if
the user has uncommitted changes in the working directory, hg aborts
with the following message:
abort: crosses branches (use 'hg merge' to merge or use 'hg update
-C' to discard changes)
If the user isn't trying to update to tip and they follow the command
examples verbatim, they would end up updating to the wrong revision.
This patch removes the command examples in favor of just telling the
user to either merge or use --clean:
abort: crosses branches (merge branches or use --clean to discard
changes)
hg also aborts if the user tries to use "hg update" to get to tip
(without specifying a revision) and tip is on another branch:
abort: crosses branches (use 'hg merge' or use 'hg update -c')
This message is changed in the same fashion:
abort: crosses branches (merge branches or use --check to force
update)
Many tests fixed the commit date of their changesets at '1000000 0' or
similar. However testing with "Mon Jan 12 13:46:40 1970 +0000" is not
better than testing with "Thu Jan 01 00:00:00 1970 +0000", which is
the default run-tests.py installs.
Removing the unnecessary flag removes some clutter and will hopefully
make it clearer what the tests are really trying to test. Some tests
did not even change their output when the dates were changed, in which
case the -d flag was truly irrelevant.
Dates used in sequence (such as '0 0', '1 0', etc...) were left alone
since they may make the test easier to understand.
