In overridecalculateupdates(), we currently only deal with conflicts
that result in a 'g' action for either the largefile or a standin. We
will soon want to deal cases with 'cd' and 'dc' actions here. It will
be easier to reason about such cases if we rewrite it using a dict
from filename to action.
A side-effect of this change is that the output can only have one
action per file (which should be a good change). Before this change,
when one of the tests in test-issue3084 received this input (the 'a'
in the input was a result of 'cd' conflict resolved in favor of the
modified file):
'g': [('.hglf/f', ('',), 'remote created')],
'a': [('f', None, 'prompt keep')],
and the user chose to keep the local largefile, it produced this
output:
'g': [('.hglf/f', ('',), 'remote created')],
'r': [('f', None, 'replaced by standin')],
'a': [('f', None, 'prompt keep')],
Although 'a' actions are processed after 'r' actions by
recordupdates(), it still worked because 'a' actions have no effect on
merges (only on updates). After this change, the output is:
'g': [('.hglf/f', ('',), 'remote created')],
'r': [('f', None, 'replaced by standin')],
Similarly, there are several tests in test-largefiles-update that get
inputs like:
'a': [('.hglf/large2', None, 'prompt keep')],
'g': [('large2', ('',), 'remote created')],
and when the user chooses to keep the local largefile, they produce
this output:
'a': [('.hglf/large2', None, 'prompt keep'),
('.hglf/large2', None, 'keep standin')],
'lfmr': [('large2', None, 'forget non-standin largefile')],
In this case, it was not a merge but an update, so the 'a' action does
have an effect. However, since dirstate.add() is idempotent, it still
has no obserable effect.
After this change, the output is:
'a': [('.hglf/large2', None, 'keep standin')],
'lfmr': [('large2', None, 'forget non-standin largefile')],
The items we put in 'newglist' are always the same as what we found in
actions['g'], so let's just put the same item into the list instead of
creating a new one.
The action lists returned from calculateupdates() (in merge.py) are
not required to be sorted. In fact, since they result from iteration
over the unordered manifest, they are unlikely to be sorted. Moreover,
some of the lists are appended to after they are returned from
manifestmerge(). The lists are instead sorted in
applyupdates(). Therefore, let's not sort the lists generated in
largefiles' overridecalculateupdates().
It deserves more than a debug message. Show a note like:
updating mq patch p0.patch to 5:9ecc820b1737
The message could also refer to "qrefresh" instead. Same same.
Show status messages while rebasing, similar to what graft do:
rebasing 12:2647734878ef "fork" (tip)
This gives more context for the user when resolving conflicts.
When merging and the remote has turned a normal file into a largefile
and the user chooses to keep the local largefile, we use the 'r'
action for the remote largefile standin. This is wrong, since that
file does not exist in the parent of the working copy. Use 'k', which
does nothing but debug logging, instead.
When merging and the remote has turned a largefile into a normal file
and the user chooses to keep the local largefile, we use the 'r'
action for the remote normal file. This is wrong, since that file does
not exist in the parent of the working copy. Use 'k', which does
nothing but debug logging, instead.
Revtodo happens to share its value with nullrev, but this is an implementation
details, so we move away from it.
After this changeset one can successfully change the values for all
the constants and the tests still pass, but doing so would require more
refactoring if we want to avoid breaking backward compatibility on the
state file.
The state mapping is using '-1' to mark revisions that have not been
rebased yet. We introduce and use a constant for that purpose. This
will help emphasize the fact the value means something other than
nullrev.
When set to true, this option will make patchbomb always ask for confirmation
before sending the email. Confirmation is a powerful way to prevent stupid
mistakes when the sending patches.
This should let me get rid of my global alias adding
--confirm to hg email.
I know that some people may get bitten when moving from a machine with confirm
configured to a machine where it is not, but I think it is worth the risk.
This option allows the user to control the default behavior for
including an introduction message. This avoids having to tirelessly
skip the intro for people contributing to Mercurial.
The three possibles values are:
- always,
- auto (default, current behavior),
- never.
I was thinking of ("true", "false", "") (empty value being auto) but I ruled it
out as too confusing.
This new config option reuses the pre-existing 'patchbomb' section.
In c69fe5519c86 (largefiles: don't show largefile/normal prompts if
one side is unchanged, 2014-12-01), overridecalculateupdates() started
checking for false modify/delete conflicts in large files and their
standins. Then, in the very next changeset, 99b29d2bd5ed (merge:
before cd/dc prompt, check that changed side really changed,
2014-12-01), calculateupdates() itself started checking for false
modify/delete conflicts in all files. Since "large files and their
standins" is a subset of "all files", we can now drop the checks in
overridecalculateupdates().
In overridecalculateupdates(), 'g' (get) actions may be converted into
other actions. In most of these cases, it does not make sense to keep
the action's message. For example, 'remote created' does not make
sense for an 'r' (remove) action.
The message in the action is used for debugging and should not be the
same as the question presented to the user. Use a different variable
for the user message, so the 'msg' variable already in scope does not
get overwritten.
The notify output doesn't seem to be parseable anyway, what with the maxdiff
config option. Plus it is designed mainly for servers where hopefully the
admins are doing sensible things.
The whitespace diffopts break lossless transmission, and the format-changing
ones make import harder. We expect parsers to be able to read git-style diffs,
though.
93eca2533d2a and 1deb493773a1 fixed issue4453 with a simple insertplainheader
function that fixed the regression but didn't make the implementation more
stable.
Now we introduce plain header handling similar to how we handle hg patches. The
whole header is scanned for fields to update while determining the best
position for inserting the field if it is missing. It also makes sure there is
an empty line between headers and body.
The fetch extension has been calling cmdutil.bailifchanged() since 70b2d52341c9,
so this is redundant. Add test coverage to prevent regression. It doesn't look
like there is any testing for fetch with largefiles.
Refactoring addremove to support subrepos will need the ability to keep passing
the same matcher and narrowing it, instead of monkey patching scmutil's matcher.
The method has been called from commands.py since 8d9ca2ac2fe8
(update: just merge unknown file collisions, 2012-02-09), so drop the
underscore prefix that suggests that it's private.
Before this patch, while "hg convert", largefiles avoids copying
largefiles in the working directory into the store area by combination
of setting "repo._isconverting" in "mercurialsink{before|after}" and
checking it in "copytostoreabsolute".
This avoiding is needed while "hg convert", because converting doesn't
update largefiles in the working directory.
But this implementation is not efficient, because:
- invocation in "markcommitted" can easily ensure updating
largefiles in the working directory
"markcommitted" is invoked only when new revision is committed via
"commit" of "localrepository" (= with files in the working
directory). On the other hand, "commitctx" may be invoked directly
for in-memory committing.
- committing without updating the working directory (e.g. "import
--bypass") also needs this kind of avoiding
For efficiency of this kind of avoiding, this patch does:
- move "copyalltostore" invocation into "markcommitted"
- remove meaningless procedures below:
- hooking "mercurialsink{before|after}" to (un)set "repo._isconverting"
- checking "repo._isconverting" in "copytostoreabsolute"
This patch invokes "copyalltostore" also in "_commitcontext", because
"_commitcontext" expects that largefiles in the working directory are
copied into store area after "commitctx". In this case, the working
directory is used as a kind of temporary area to write largefiles out,
even though converted revisions are committed via "commitctx" (without
updating normal files).
Putting "lambda *msg, **opts: None" (= avoid printing messages always)
into "_lfstatuswriters" while transplanting makes explicit passing
"printmessage = False" for "updatelfiles()" useless.
This patch also removes setting/unsetting "repo._istransplanting" in
"overridetransplant", because there is no code path referring it.
Before this patch, "hg transplant --continue" may record incorrect
standins, because largefiles extension always avoid updating standins
while transplanting, even though largefiles in the working directory
may be modified manually at the 1st commit of "hg transplant --continue".
But, on the other hand, updating standins should be avoided at
subsequent commits for efficiency reason.
To update standins only at the 1st commit of "hg transplant
--continue", this patch uses "automatedcommithook", which updates
standins by "lfutil.updatestandinsbymatch()" only at the 1st commit of
resuming.
Even after this patch, "repo._istransplanting = True" is still needed
to avoid some status report while updating largefiles in
"lfcommands.updatelfiles()".
This is reason why this patch omits not "repo._istransplanting = True"
in "overriderebase" but examination of "getattr(repo,
"_istransplanting", False)" in "updatestandinsbymatch".
At "hg transplant --merge REV", largefiles newly coming from the 2nd
parent (= REV) are marked as "a"(dded) by "patch.patch()", and have to
be marked as "n"(ormal) after commit.
But until changeset 978713c45992, such largefiles were still marked as
"a" unexpectedly even after commit, because no additional entry is
added to filelog of such largefiles and they aren't listed in
"repo[newnode].files()" in this case: "newnode" is one of newly
committed changeset (= result of "repo.commit()").
"updatelfiles" invocation in "overridetransplant" shadows this problem
by forcibly synchronizing lfdirstate to dirstate.
Now, "updatelfiles" invocation in "overridetransplant" is redundant,
because changeset 978713c45992 made "markcommitted" use "ctx.files()"
to get targets of "synclfdirstate" instead of "repo[newnode].files()".
Putting "lambda *msg, **opts: None" (= avoid printing messages always)
into "_lfstatuswriters" while rebasing makes explicit passing
"printmessage = False" for "updatelfiles()" useless.
This patch also removes setting/unsetting "repo._isrebasing" in
"overriderebase", because there is no code path referring it.
This patch makes "updatelfiles()" get appropriate function to write
largefiles specific status messages via "getstatuswriter()".
This patch introduces None as "print messages if needed", because True
(forcibly writing) and False (forcibly ignoring) are already used for
"printmessage" of "updatelfiles".
Subsequent patch will move "avoid printing messages only while
automated committing" decision from caller of "updatelfiles()" into
"getstatuswriter()".
"lfutil.getstatuswriter" is the utility to get appropriate function to
write largefiles specific status out from "repo._lfstatuswriters".
This patch uses "stack" with an element instead of flag like
"_isXXXXing" or so, because:
- the former works correctly even when customizations are nested, and
- ensuring at least one element can ignore empty check
Before this patch, "hg rebase --continue" may record incorrect
standins, because largefiles extension always avoid updating standins
while rebasing, even though largefiles in the working directory may be
modified manually at the 1st commit of "hg rebase --continue".
But, on the other hand, updating standins should be avoided at
subsequent commits for efficiency reason.
To update standins only at the 1st commit of "hg rebase --continue",
this patch introduces state-full callable object
"automatedcommithook", which updates standins by
"lfutil.updatestandinsbymatch()" only at the 1st commit of resuming.
Even after this patch, "repo._isrebasing = True" is still needed to
avoid some status report while updating largefiles in
"lfcommands.updatelfiles()".
This is reason why this patch omits not "repo._isrebasing = True" in
"overriderebase" but examination of "getattr(repo, "_isrebasing",
False)" in "updatestandinsbymatch".
This changes allows to customize pre-committing procedures according
to conditions.
This patch uses "stack" with an element instead of flag like
"_isXXXXing" or so, because:
- the former works correctly even when customizations are nested, and
- ensuring at least one element can ignore empty check
This patch factors out procedures to update standins for
pre-committing. This is one of preparations to avoid execution of such
procedures according to invocation context.
For example, resuming automated committing (e.g. "hg rebase
--continue") should update standins at the 1st commit, because
largefiles in the working directory may be modified manually. But on
the other hand, it should avoid updating standins at subsequent
committings for efficiency reason.
For simplicity, this patch just moves procedures mechanically only
with replacing below.
- "self" => "repo"
- "lfutil." => (none)
- "orig" invocation => returning "match"
Using "fstandin" instead "standin" as the name of local variable for
the loop below is the only special care, because the latter shadows
the same name function in "lfutil.py".
[before]
for standin in standins:
lfile = lfutil.splitstandin(standin)
if lfdirstate[lfile] != 'r':
lfutil.updatestandin(self, standin)
[after]
for fstandin in standins:
lfile = splitstandin(fstandin)
if lfdirstate[lfile] != 'r':
updatestandin(repo, fstandin)
Before this patch, procedures to update lfdirstate for post-committing
are scattered in "lfilesrepo.commit". In the case of "hg commit" with
patterns for target files ("Case 2"), lfdirstate is updated BEFORE
real committing.
This patch factors out procedures to update lfdirstate for
post-committing into "lfutil.markcommitted", and makes it callable via
"markcommitted" of the context passed to "lfilesrepo.commitctx".
"markcommitted" of the context is called, only when it is committed
successfully.
Passing original "markcommitted" of the context is meaningless in this
patch, but required in subsequent one to prepare something before
invocation of it.
This patch removes "--rebase" specific code path for "hg pull" in
"overridepull", because previous patch makes it meaningless: now,
"rebase.rebase" ("orig" invocation in this patch) can
update/commit largefiles safely without "repo._isrebasing = True".
As a side effect of removing "rebase.rebase" invocation in
"overridepull", this patch removes "nothing to rebase ..." message in
"test-largefiles.t", which is shown only when rebase extension is
enabled AFTER largefiles:
before this patch:
1. "dispatch" invokes "pullrebase" of rebase as "hg pull" at
first, because rebase wraps "hg pull" later
2. "pullrebase" invokes "overridepull" of largefiles as "orig",
even though rebase assumes that "orig" is "pull" of commands
3. "overridepull" executes "pull" and "rebase" directly
3.1 "pull" pulls changesets and creates new head "X"
3.2 "rebase" rebases current working parent "Y" on "X"
4. "overridepull" returns to "pullrebase"
5. "pullrebase" tries to rebase, but there is nothing to be done,
because "Y" is already rebased on "X". then, it shows "nothing
to rebase ..."
after this patch:
1. "dispatch" invokes "pullrebase" of rebase as "hg pull"
2. "pullrebase" invokes "overridepull" of largefiles as "orig"
3. "overridepull" executes "pull" as "orig"
4. "overridepull" returns to "pullrebase"
5. revision "Y" is not yet rebased, so "pullrebase" doesn't shows
"nothing to rebase ..."
As another side effect of removing "rebase.rebase" invocation, this
patch fixes issue3861, which occurs only when rebase extension is
enabled BEFORE largefiles:
before this patch:
1. "dispatch" invokes "overridepull" of largefiles at first,
because largefiles wrap "hg pull" later
2. "overridepull" executes "pull" and "rebase" explicitly
2.1 "pull" pulls changesets and creates new head "X"
2.2 "rebase" rebases current working parent, but fails because
no revision is checked out in issue3861 case
3. "overridepull" returns to "dispatch" with exit code 1 returned
from "rebase" at (2.2)
4. "hg pull" terminates with exit code 1 unexpectedly
after this patch:
1. "dispatch" invokes "overridepull" of largefiles at first
2. "overridepull" invokes "pullrebase" of rebase as "orig"
3. "pullrebase" invokes "pull" as "orig"
4. "pullrebase" invokes "rebase", and it fails
5. "pullrebase" returns to "overridepull" with exit code 0
(because "pullrebase" ignores result of "pull" and "rebase")
6. "overridepull" returns to "dispatch" with exit code 0 returned
from "rebase" at (5)
7. "hg pull" terminates with exit code 0
Before this patch, largefiles extension wraps only "rebase" in the
command table by "extensions.wrapcommand". But there are some
functions using "rebase.rebase" directly.
Without special care for them, largefiles extension can't work
correctly with such functions. In addition to it, "special care" often
becomes complicated and awkward. For example:
- "unshelve" can't get correct result of "rebase.rebase", because of
lack of special care
- special care for "hg pull --rebase" causes issue3861
This patch wraps "rebase.rebase" for functions using it directly.
For simplicity, this patch keeps 'special care for "hg pull --rebase"'.
It is removed in the subsequent patch.
The current output is mostly a wall of text. This makes it hard to
actually check something for people with lazy eyes. We use labels and
colors to make it more joyful (and get the patch summaries to stand
out). The colors have been arbitrarily choosen. They can be changed
later if someone has a more scientific choice.
In the dropped example, the extension would look for 'vdiff.diffargs' in the
configuration, and not finding it, would run kdiff3 without the configured
options. That's not obvious to a new user who sees a kdiff3 configuration in
the prepackaged mergetools.rc file, and sees that kdiff3 still runs. While it
is conceivable that the user wants a kdiff3 command that runs without the
preconfigured options, it is more likely what they want is this, which uses the
canned options:
[alias]
vdiff = kdiff3
[extdiff]
kdiff3 =
We could mention alias here, but that seems like it belongs elswhere.
There are three ways to configure an extdiff tool:
1) cmd.tool = (/path/to/exe optional)
2) tool = (path/to/exe optional)
3) tool = sometool someargs
Previously, if no executable is specified in the first two forms, the named tool
must be in $PATH, or the invocation fails. Since the [merge-tools] section
already has the path to the diff executable, and/or the registry keys to find
the executable on Windows, reuse that configuration for forms 1 and 2 instead of
failing. We already fallback to [diff-tools] and then [merge-tools] for program
arguments if they aren't specified in the [extdiff] section.
Since this additional lookup only occurs if an executable is not on the $PATH
for the named tool, this is backwards compatible. For now, we assume the user
knows what he is doing if a path is provided.
This change allows a configuration file like this (assuming beyondcompare3 is
configured in merge-tools), instead of hardcoding system specific a path:
[extdiff]
beyondcompare3 =
Instead of checking for a partial merge by checking that the matches
has no files and no patterns, check that it's not an
always-matcher. Except for being shorter, it also catches the rare
case of an exact-matcher with no files.
We currently shortcircuit the checking for large file standins if only
patterns of type 'path' are given on the command line. That makes e.g.
"hg st 'glob:foo/**'" unnecessarily slow when the only large files are
in a sibling directory.
Relax the check to be that it is not an always-matcher and that no
large files match the patterns given on the command line.
Note that before this change, only the latter of the following two
would show the status of files in .hglf (since the -I makes
match.anypats() true). After this change, they both display the
status. This behavior doesn't seem correct, but it would be a separate
change to explicitly filter out .hglf even in the shortcircuit case.
hg st .hglf/$file
hg st .hglf/$file -I .
In two very similar segments of code, an existing matcher is modified
by changing its _files attribute through a map and a filter
operation. Neither operation can cause an empty list to become
non-empty, so a matcher that always matches can not stop always
matching. Drop the setting of the attribute, so we don't unnecessarily
prevent the fast paths to be taken where these matchers end up being
used.
The phrase "revision or range" comes from a pre-revset era. Since the
documentation for ranges now is under the revset docs, and as a
helpful hint nudging users towards revsets, I think it's better to say
"revision or revset"
Before this patch, "hg status --rev REV" doesn't list largefiles up
with "M" mark, even if exec bit of them is changed, because
"lfilesrepo.status" doesn't examine exec bit in such case.
Before this patch, "hg status --rev REV" listed largefiles removed in
the working directory up with "R" mark, even if they aren't managed in
the REV. Normal files aren't listed up in such case.
When "lfilesrepo.status" is invoked for "hg status --rev REV", it
treats files on conditions below as "removed" (to avoid manifest full
scan in "ctx.status" ?):
- marked as "R" in lfdirstate, or
- files managed in the target revision but unknown in the manifest
of the working context (= not including "R" files)
But the former can include files not managed in the target context.
To ignore removal status of files not managed in the target context,
this patch drops files unknown in the target revision from "removed"
list.
Instead of calling repo[None].status(), use the more common form that
uses the parent of the working copy as the base:
repo['.'].status(). Note that the former defaults to comparing to
revision '.', while the latter defaults to revision None, so the
contexts being compared are the same.
It might seem like this would result in a reverse diff, but it turns
out that workingctx.status() incorrectly reverses the result. That bug
will be fixed in a later commit.
The old revset had pretty terrible performance on large repositories (12+
seconds). This new revset achieves the same result in only 0.7s. As we improve
the underlying revset APIs we can probably get this revset down to 'only(base,
dest)::', but at the moment that version still takes 2s.
Read the state in histeditstate. This allows us to correctly update
internal variables when necessary without having to recreate a new
state. When we read a state in _histedit state while we will already
have state passed from histedit(), we can read the state in place
and don't have to merge two histeditstates.
The histedit code often expects a context. However histedit hands
around the tuple for the serialization and therefore hand over a
parentctxnode. This leads to code having to return a context based
on the parentctxnode. We let the state only return a context but
correctly serialize and deserialze to a node.
Add an histeditstate class that is intended to hold the current
state. This allows us encapsulate the state and avoids passing
around a tuple which is based on the serialization format. In
particular this will give actions more control over the state and
allow external sources to have more control of histedits behavior,
e.g. an external implementation of x/exec.
The basic obsolete option is allowing the creation of obsolete markers. This
does not enable other features, such as allowing unstable commits or exchanging
obsolete markers.
By making checklocalchanges() return the full instance of the status
class instead of just the first 4 elements of it, we can take
advantage of the field names and not require the caller to remember
the element indices.
In lfdirstatestatus(), the status tuple gets deconstructed, the lists
get updated, and then an identical status tuple gets created and
returned. Change it so we simply return the original tuple.
The status tuple returned from dirstate.status() has an additional
field compared to the other status tuples: lookup/unsure. This field
is just an optimization and not something most callers care about
(they want the resolved value of 'modified' or 'clean'). To prepare
for a single future status type, let's separate out the 'lookup' field
from the rest by having dirstate.status() return a pair: (lookup,
status).
This is preparation for removing open-coded rebase/graft operations.
As a side-effect, this exposes proper renames in the working copy when
there are conflicts, which shows up in test-shelve.t.
The `nodes` object is a set. We sort it to get stable order. This is going to
prevent revsets from getting confused when removing a `.set()` call in `roots`.
When unshelving and facing a conflict, if we resolve all conflicts in
favour of the committed changes instead of the shelved changes, then
the ensuing implicit rebase is a no-op. That is, there is nothing to
rebase. In this case, there are no extra intermediate shelve commits
to strip either. Prior to this change, the commit being unshelved to
would be marked for destruction in a rather catastrophic way.
The relevant part of the test case failed as follows:
$ hg unshelve -c
unshelve of 'default' complete
$ hg diff
warning: ignoring unknown working parent 33f7f61e6c5e!
diff --git a/a/a b/a/a
new file mode 100644
--- /dev/null
b/a/a
@@ -0,0 1,3 @@
a
c
x
$ hg status
warning: ignoring unknown working parent 33f7f61e6c5e!
M a/a
? a/a.orig
? foo/foo
$ hg summary
warning: ignoring unknown working parent 33f7f61e6c5e!
parent: -1:000000000000 (no revision checked out)
branch: default
commit: 1 modified, 2 unknown (new branch head)
update: 4 new changesets (update)
With this change, this test case now passes.
Sorting is super-cheap with the new smartset class, so we can use it to enforce
the order. Otherwise all smartset classes would have to allow direct indexing.
The color docstring was getting long. This splits it up into
bite-sized sections and rearranges the order of the paragraphs a
little to match these sections.
This is most noticeable when using custom templates. Before this
patch, a template like {label("foo.bar", baz)} would emit
[foo.bar|]
whenever baz was empty. This cset simply omits all output when baz is
empty.
Before this patch, "hg qselect" with --pop/--reapply may pop patches
unexpectedly, even when all of patches applied before "qselect" are
still pushable.
Strictly speaking about the condition of this issue:
- before "qselect"
- there are N applied patches
- the index of the guarded patch X in the series is less than N
- after "qselect"
- X is still guarded, and
- all of applied patched are still pushable
In the case above, "hg qselect" should keep current status, but it
actually tries to pop patches because of X.
The index in "the series" should be used to examine "pushable" of a
patch by "mq.pushablek()", but the index in "applied patches" is used,
and this may cause unexpected examination of guarded patch.
To examine "pushable" of already applied patch correctly, this patch
uses "mq.applied[i].name": "pushable" is the function introduced by
the previous patch, and it returns "mq.pushable(mq.applied[i].name)[0]".
Before this patch, "hg qselect" with --pop/--reapply may pop incorrect
patches, because the index in "applied patches" is used to pop patches
by "mq.pop()", even though the index in "the series" should be used.
For example, when the already applied patch becomes guarded and it
follows the already guarded (= not yet applied) one, "hg qselect" is
aborted, because it tries to pop to guarded one.
This patch uses "mq.applied[i - 1].name" to pop to the patch, of which
the index in the "applied ones" is "i - 1".
Before this patch, "hg qselect --reapply" is aborted when "--verbose"
is specified, because "mq.appliedname()" returns "INDEX PATCHNAME"
instead of "PATCHNAME" in such case and "mq.push" can't accept the
former as the name of patch.
This patch uses "mq.applied[i].name" instead of "mq.appliedname(i)" as
the name of the patch to be pushed for safety.
Now, there is no code path using "mq.appliedname()", and it should be
removed to prevent developers from using it in the wrong way like this
issue.
Before this patch, "hg qselect" may report incorrect numbers for
"number of guarded, applied patches has changed", because it examines
"pushable" of patches by the index not in "the series" but in "applied
patches", even though "mq.pushable()" expects the former.
To report correct numbers for changing "number of guarded, applied
patches", this patch uses the name of applied patch to examine
pushable-ness of it.
This patch also changes the result of existing "hg qselect" tests,
because they doesn't change pushable-ness of already applied patches.
This patch assumes that "hg qselect" focuses on changing pushable-ness
only of already applied patches, because:
- the report message uses not "previous" (in the series) but
"applied"
- the logic to pop patches for --pop/--reapply examines
pushable-ness only of already applied ones (in fact, there are
some incorrect code paths)
This is a no-op change that simply suggests that tabs can be
colourised, but defaults to no colour effects for tabs. This
complements cset 56ff694317ca.
Like the similar effects for phases from 8f322ff11fbb, we set the
default effects to '' instead of None, so that this is a true noop
change. Otherwise, the diff.tab effect would override (i.e.
neutralise) the effect of the surrounding label.
The call to repo.status() does not request status for clean files, so
there is no reason to slice it out from the result. Leaving the tuple
untouched will simplify a future change.
Use the existing method cmdutil.bailifchanged() instead of
implementing it again in fetch.py. An effect of this is that the error
messages in case of uncommited changes will be different.
This makes hg log --follow --patch work, since in cmdutil._makelogrevset we
use the non-follow matcher for hg log --follow --patch with no file arguments.
This has actually been broken since at least Mercurial 2.8 -- hg log --patch
with largefiles only used to work when no largefiles existed. Rev 658ce4a0a0a9
exposed this bug for all cases.
lfstatus should only be True for operations where we want standins to be
printed out. We explicitly do not want that for historical operations like log.
Other historical operations like hg diff -r A -r B don't print out standins
either.
This is required to fix issue4334, but doesn't fix anything by itself. That's
why there aren't any tests accompanying this patch.
When the authorship of the changeset folded in does not match that of
the base changeset, we currently use the configured ui.username
instead. This is especially surprising when the user is not the author
of either of the changesets. In such cases, the resulting authorship
(the user's) is clearly incorrect. Even when the user is folding in a
patch they authored themselves, it's not clear whether they should
take over the authorship. Let's instead keep it simple and always
preserve the base changeset's authorship. This is also how
"git rebase -i" handles folding/squashing.
This is a quick fix for some consoles on windows (consoles that are not mingw
based) so that the debugcolor command doesn't throw a KeyError when effects
aren't supported (e.g. italic).
This patch fixes argument mismatch at formatting the abort message,
introduced by dcf325a55d85: the last '%s' doesn't have corresponded
argument.
This patch uses "unexpected size" in the abort message, to distinguish
the reason of failure from "unexpected type" failure checked in the
prior code path below:
if info[1] != type:
raise util.Abort(_('cannot read %r object at %s') % (type, rev))
This patch changes help text for "--edit" option of commands below:
- fetch
- qnew
- qrefresh
- qfold
- commit
- tag
This unification reduces translation cost, too.
This patch chooses not "further edit commit message already specified"
(of "hg commit") but "invoke editor on commit messages" as unified
help text for "--edit" option, because the latter is much older than
the former.
This patch changes help text for "--message" option of commands below
for unification.
- sign (of gpg)
- tag
This unification reduces translation cost, too.
This patch doesn't change the description for "--message" of "hg
rebase" below, because this should contain "collapse" word to explain
its purpose (only for "--collapse") clearly.
use text as collapse commit message
Before this patch, largefiles gotten from revisions other than the
parent of the working directory at "hg revert" become "clean"
unexpectedly in steps below:
1. "repo.status()" is invoked (for status check before reverting)
1-1 "dirstate" entry for standinfile SF is "normal"-ed
(1-2 "lfdirstate" entry of largefile LF (for SF) is "normal"-ed)
2. "cmdutil.revert()" is invoked
2-1 standinfile SF is updated in the working directory
2-2 "dirstate" entry for SF is NOT updated
3. "lfcommands.updatelfiles()" is invoked (by "overrides.overriderevert()")
3-1 largefile LF (for SF) is updated in the working directory
3-2 "dirstate" returns "n" and valid timestamp for SF (by 1-1 and 2-2)
3-3 "lfdirstate" entry for LF is "normal"-ed
3-4 "lfdirstate" is written into ".hg/largefiles/dirstate", and
timestamp of LF is stored into "lfdirstate" file (by 3-3)
(ASSUMPTION: timestamp of LF differs from one of "lfdirstate" file)
Then, "hs status" treats LF as "clean", even though LF is updated by
"other" revision (by 3-1), because "lfilesrepo.status()" always treats
"normal"-ed files (by 3-3 and 3-4) as "clean".
When largefiles are reverted, they should be "normallookup"-ed
forcibly.
This patch uses "normallookup" on "lfdirstate" while reverting, by
passing "True" to newly added argument "normallookup".
Forcible "normallookup"-ing is not so expensive, because list of
target largefiles is explicitly specified in this case.
This patch uses "[debug] dirstate.delaywrite" feature in the test, to
ensure that timestamp of the largefile gotten from "other" revision is
stored into ".hg/largefiles/dirstate" (for ASSUMPTION at 3-4)
Before this patch, largefiles gotten from "other" revision (with
conflict) at "hg merge" become "clean" unexpectedly in steps below:
1. "repo.status()" is invoked (for status check before merging)
1-1 "dirstate" entry for standinfile SF is "normal"-ed
1-2 "lfdirstate" entry of largefile LF (for SF) is "normal"-ed
2. "merge.update()" is invoked
2-1 SF is updated in the working directory
(ASSUMPTION: user choice "other" at conflict)
2-2 "dirstate" entry for SF is "merge"-ed
3. "lfcommands.updatelfiles()" is invoked (by "overrides.hgmerge()")
3-1 largefile LF (for SF) is updated in the working directory
3-2 "dirstate" returns "m" for SF (by 2-2)
3-3 "lfdirstate" entry for LF is left as it is
3-4 "lfdirstate" is written into ".hg/largefiles/dirstate", and
timestamp of LF is stored into "lfdirstate" file (by 1-2)
(ASSUMPTION: timestamp of LF differs from one of "lfdirstate" file)
Then, "hs status" treats LF as "clean", even though LF is updated by
"other" revision (by 3-1), because "lfilesrepo.status()" always treats
"normal"-ed files (by 1-2 and 3-4) as "clean".
When state of standinfile in "dirstate" is "m", largefile should be
"normallookup"-ed.
This patch invokes "normallookup" on "lfdirstate" for merged files.
This patch uses "[debug] dirstate.delaywrite" feature in the test, to
ensure that timestamp of the largefile gotten from "other" revision is
stored into ".hg/largefiles/dirstate". (for ASSUMPTION at 3-4)
Before this patch, largefiles gotten from "other" revision (without
conflict) at "hg merge" become "clean" unexpectedly in steps below:
1. "merge.update()" is invoked
1-1 standinfile SF is updated in the working directory
1-2 "dirstate" entry for SF is "normallookup"-ed
2. "lfcommands.updatelfiles()" is invoked (by "overrides.hgmerge()")
2-1 largefile LF (for SF) is updated in the working directory
2-2 "dirstate" returns "n" for SF (by 1-2)
2-3 "lfdirstate" entry for LF is "normal"-ed
2-4 "lfdirstate" is written into ".hg/largefiles/dirstate", and
timestamp of LF is stored into "lfdirstate" file
(ASSUMPTION: timestamp of LF differs from one of "lfdirstate" file)
Then, "hs status" treats LF as "clean", even though LF is updated by
"other" revision (by 2-1), because "lfilesrepo.status()" always treats
"normal"-ed files (by 2-3 and 2-4) as "clean".
When timestamp is not set (= negative value) for standinfile in
"dirstate", largefile should be "normallookup"-ed regardless of
rebasing or not, because "n" state in "dirstate" doesn't ensure
"clean"-ness of a standinfile at that time.
This patch uses "normallookup" instead of "normal", if "mtime" of
standin is unset
This is a temporary way to fix with less changes. For fundamental
resolution of this kind of problems in the future, "lfdirstate" should
be updated with "dirstate" simultaneously while "merge.update"
execution: maybe by hooking "recordupdates"
It is also why this patch (temporarily) uses internal field "_map" of
"dirstate" directly.
This patch uses "[debug] dirstate.delaywrite" feature in the test, to
ensure that timestamp of the largefile gotten from "other" revision is
stored into ".hg/largefiles/dirstate". (for ASSUMPTION at 2-4)
This patch newly adds "test-largefiles-update.t", to avoid increasing
cost to run other tests for largefiles by subsequent patches
(especially, "[debug] dirstate.delaywrite" causes so).
Previously, the directory '.hg/largefiles' would always be created if it didn't
exist when the lfdirstate was opened. If there were no standin files, no
dirstate file would be created in the directory. The end result was that
enabling the largefiles extension globally, but not explicitly adding a
largefile would result in the repository eventually sprouting this directory.
Creation of this directory effectively changes readonly operations like summary
and status into operations that require write access. Without write access,
commands that would succeed without the extension loaded would abort with a
surprising error when the extension is loaded, but not actively used:
$ hg sum -R /tmp/thg --config extensions.largefiles=
parent: 16541:00dc703d5aed
repowidget: specify incoming bundle by plain file path to avoid url parsing
branch: default
abort: Permission denied: '/tmp/thg/.hg/largefiles'
This change is simpler than changing the callers of openlfdirstate() to use the
'create' parameter that was introduced in 74522122b97d, and probably how that
should have been implemented in the first place.
The contents of the .files file has not been used since 98058c06ff6b
(shelve: use rebase instead of merge (issue4068), 2013-10-23), so stop
writing it. Where we currently use the presence of the file as a check
for a valid shelve name, switch to checking for the .patch file.
Parent will now always be updated or added when qrefreshing HG patches. Plain
patches will not be changed, but patches that neither are plain nor HG will be
upgraded to HG patches on first refresh.
Instead of iterating over all files in the context and ignoring those
that are not standins, pass a standin-matcher to the context and
iterate over only the files matching.
Apart from making the intent clearer, this implementation will also
benefit from any future optimizations done to the manifest walking
code.
The variable 'lfiles' is first used for a set of the names of all the
large files. It is then overwritten with a tuple like the ones
returned from status(). To reduce confusion, let's create a separate
variable for the second use.
At the end of lfilesrepo.status(), we clear the lists of unknown,
ignored and clean files, depending on the values of 'listunknown'
etc. The lists originate from other calls to status(), and it is only
'clean' that may get updated after the calls. Let's remove the need to
clear any of the lists by explicitly only adding to 'clean' when
'listclean' is true.
Don't try to append empty lines to HG patch headers - instead, add them in str
method.
This minor change removes some apparently redundant code and makes the code
more robust.
There would in some cases be an empty line between headers and the description -
that does not seem right.
There should also be an empty line between description and diff - but that was
missing.
These two mistakes would sometimes make it up for each other so we fix both at
once to just show the improvement.
Instead of writing an extra newline when writing a header line, write an extra
line when it not is written as a part of the description but is necessary
anyway.
This default mirrors the default for 'git diff'. Other commands have slightly
different defaults -- for example, the move/copy detection for 'git blame'
assumes that a hunk is moved if more than 40 alphanumeric characters are the
same, or copied if more than 20 alphanumeric characters are the same. 50% seems
to be the most common default, though.
Git is fairly unique among VCSes in that it doesn't record copies and renames,
instead choosing to detect them on the fly. Since Mercurial expects copies and
renames to be recorded, it can be valuable to preserve this history while
converting a Git repository to Mercurial. This patch adds a new convert option,
called 'convert.git.similarity', which determines how similar files must be to
be treated as renames or copies.
It's very useful to be able to colourise csets according to their
phases. There was no indication anywhere in the docs that this is
possible.
We use e.g. `changeset.secret = ` instead of `changeset.secret
='none'`, because otherwise this is a BC: it would nullify the effects
given to log.changeset label that usually surrounds the
changeset.{phase} labels. Specifying the label without any effect
instead of 'none' is a true no-op change and purely documentation.
Before, the format was
label(labeled text) # single label
[label1 label2](labeled text) # multiple
Now, it's
[labels|labeled text]
..which should make things a bit more clear.
This is a debug option for showing labels. This can be helpful for
knowing which labels are available for colouring or to see the output
when defining your own templates. A couple of tests are included.
It is a deeply hidden secret that it's possible to colorise so many
things with so many different labels. This is an attempt to document
this. The text is a bit long, but it seems as short as can be while
documenting everything. Perhaps it should be hidden under a --verbose
option.
This produces slightly bad results when branches are in play, but
overall I think it's probably worthwhile. We might be able to do
better with branches somehow, but I haven't given it any thought.
This makes it possible to estimate how long the "scanning source"
phase will take, if the specified source repo type supports a quick
"how many changes" check.
This wraps all the locations of dirstate.setparent with the appropriate
begin/endparentchange calls. This will prevent exceptions during those calls
from causing incoherent dirstates (issue4353).
No Mercurial DAG has ever (!) been drawn in a way where 'up to' would apply.
Instead, describe deliberatey vague and informal instead of seemingly precise
but not describing the essentials:
rebase the tree around the specified changeset without ancestors of dest
A common mistake can be to type 'hg rebase -i' to discover interactive history
editing. We add a -i/--interactive flag as discussed in the sprint and deprecate
it right away, but hint people using it to use histedit instead.