Summary:
D13853115 adds `edenscm/` to `sys.path` and code still uses `import mercurial`.
That has nasty problems if both `import mercurial` and
`import edenscm.mercurial` are used, because Python would think `mercurial.foo`
and `edenscm.mercurial.foo` are different modules so code like
`try: ... except mercurial.error.Foo: ...`, or `isinstance(x, mercurial.foo.Bar)`
would fail to handle the `edenscm.mercurial` version. There are also some
module-level states (ex. `extensions._extensions`) that would cause trouble if
they have multiple versions in a single process.
Change imports to use the `edenscm` so ideally the `mercurial` is no longer
imported at all. Add checks in extensions.py to catch unexpected extensions
importing modules from the old (wrong) locations when running tests.
Reviewed By: phillco
Differential Revision: D13868981
fbshipit-source-id: f4e2513766957fd81d85407994f7521a08e4de48
Summary:
This makes tests closer to production setup and removes a bunch of "saved
backup bundle to ..." messages.
With D9236657, this should not hurt server-side performance.
Unfortunately a lot tests cannot be migrated easily, mostly because revision
numbers are used. They are left with a TODO.
Reviewed By: DurhamG
Differential Revision: D9237694
fbshipit-source-id: c993fce18f07aba09f6d70964e248af8d501575a
Summary:
Replace the default help for Mercurial with a curated list of interesting
commands, categorized by their use case.
Reviewed By: phillco
Differential Revision: D10356916
fbshipit-source-id: 65e578a4bfde7b0ad04e7107f4e77d8ea882d78a
Summary:
mq is already somehow problematic at D8907646. Without bandwidth supporting
it, let's remove it.
Alternative to mq would be rebase, shelve, unshelve, histedit.
Maintain "--config extensions.mq=" compatibility by marking it builtin so hg4idea
won't break by this change.
Reviewed By: phillco
Differential Revision: D9039741
fbshipit-source-id: a3a1e48a2a982ff8e8b6a6ce659c906a4e2b2b36
Summary:
Since we have `debugbuilddag` as a builtin command, and `drawdag` is
pretty useful for writing clean test cases. Let's inline it. This would
simplify many tests since `drawdag=..." is no longer needed.
Reviewed By: DurhamG
Differential Revision: D6827925
fbshipit-source-id: b749f57fd5c55b2cb000dd2da2c2f9bc2386a519
Summary:
The helper could be used in individual tests to enable chg if chg exists.
This allows us to have more precise control on what tests to use chg instead
of using a global flag in run-tests.py.
This makes certain tests containing many hg commands much faster. For example,
`test-revset.t` took 99 seconds before:
% ./run-tests.py test-revset.t --time
.
# Ran 1 tests, 0 skipped, 0 failed.
# Producing time report
start end cuser csys real Test
0.000 99.990 86.410 12.000 99.990 test-revset.t
And 10 seconds after:
% ./run-tests.py test-revset.t --time
.
# Ran 1 tests, 0 skipped, 0 failed.
# Producing time report
start end cuser csys real Test
0.000 10.080 0.380 0.130 10.080 test-revset.t
Also enable it for some other tests. Note the whitelist is not complete. We
probably want to whitelist more tests in the future.
The feature could be opted out by deleting `contrib/chg/chg`.
Reviewed By: phillco
Differential Revision: D6767036
fbshipit-source-id: 8220cf408aa198d5d8e2ca5127ca60e2070d3444
Summary: Also change the internal API so it no longer accepts the "heads" argument.
Reviewed By: ryanmce
Differential Revision: D6745865
fbshipit-source-id: 368742be49b192f7630421003552d0a10eb0b76d
Summary: This removes the effectflag logic from both core and perftweaks.
Reviewed By: ryanmce
Differential Revision: D6745769
fbshipit-source-id: 55ed1676e7117bca358471c256805ded7bc83f3c
# skip-blame because this was mechanically rewritten the following script. I
ran it on both *.t and *.py, but none of the *.py changes were proper. All *.t
ones appear to be, and they run without addition failures on both Windows and
Linux.
import argparse
import os
import re
ap = argparse.ArgumentParser()
ap.add_argument('path', nargs='+')
opts = ap.parse_args()
globre = re.compile(r'^(.*) \(glob\)(.*)$')
for p in opts.path:
tmp = p + '.tmp'
with open(p, 'rb') as src, open(tmp, 'wb') as dst:
for line in src:
m = globre.match(line)
if not m or '$LOCALIP' in line or '*' in line:
dst.write(line)
continue
if '?' in line[:-3] or ('?' in line[:-3] and line[-3:] != '(?)'):
dst.write(line)
continue
dst.write(m.group(1) + m.group(2) + '\n')
os.unlink(p)
os.rename(tmp, p)
We want to get rid of stabilization.* configuration, back out to the old
configuration 'evolution.track-operation'.
Differential Revision: https://phab.mercurial-scm.org/D1153
We replace 'experimental.stabilization=all' by 'experimental.evolution=true'
as we will extract individual config in their own config in later patches.
Differential Revision: https://phab.mercurial-scm.org/D1148
Upon pull or unbundle, we display a message with the range of new revisions
fetched. This revision range could readily be used after a pull to look out
what's new with 'hg log'. The algorithm takes care of filtering "obsolete"
revisions that might be present in transaction's "changes" but should not be
displayed to the end user.
Test contributed by Matt Harbison
Keep the same behavior in most cases (i.e. first parent of the first root of
stripped changsets), but if the branch differs from wdir's, try to find another
parent of stripped commits that is on the same branch.
The test was using reposetup which had the logic for stripping
commits. This leads to a situation where if the reposetup was called twice for
an extension (which can happen with chg running), the stripped node would not
be found the second time. Therefore, this commit changes the test to put the
stripping logic inside commands instead of the reposetup. This ensures that the
stripping logic is invoked only when the command is invoked and thus, avoids
any problems.
Test Plan:
Ran the test 'test-strip.t' with and without the '--chg' option.
Differential Revision: https://phab.mercurial-scm.org/D928
We added support for including the operation responsible for creating
the obsmarker in 44ba6434eaf4 (obsolete: add operation metadata to
rebase/amend/histedit obsmarkers, 2017-05-09). However, soon
thereafter, in 819cf35e629a (obsmarker: add an experimental flag
controlling "operation" recording, 2017-05-20), it was hidden behind a
config that was off by default. It seems unlikely that people will
manually turn it on, and obsmarkers/evolution as a whole is still
experimental anyway, so let's turn on the tracking by default.
Differential Revision: https://phab.mercurial-scm.org/D722
It seems like we used to pick the oldest possible version of the
changegroup to use for bundles created by the repair module (used
e.g. by "hg strip" and for temporary bundles by "hg rebase"). I tried
to preserve that behavior when I created the changegroup.safeversion()
method in 77f74106b264 (changegroup: introduce safeversion(),
2016-01-19).
However, we have recently chagned our minds and decided that these
commands are only used locally and downgrades are unlikely. That
decicion allowed us to start adding obsmarker and phase information to
these bundles. However, as the bug report shows, it means we get
different behavior e.g. when generaldelta is not enabled (because when
it was enabled, it forced us to use bundle2). The commit that actually
caused the reported bug was 26d535788092 (strip: include phases in
bundle (BC), 2017-06-15).
So, since we now depend on having more information in the bundles,
let's make sure we instead pick the newest possible changegroup
version.
Differential Revision: https://phab.mercurial-scm.org/D715
In addition to a test case for the direct problem described in the bug
report, this also adds a test case showing how obsmarkers can also get
lost when not using generaldelta.
Differential Revision: https://phab.mercurial-scm.org/D714
Consider a graph like this:
D
|\
B C
|/
A
drawdag will add a file called A in commit A, file B in B, file C in
C. That's fine and expected. In merge commits like D, I would expect
the files and their contents to be taken from the parent commits, so
commit D in this example would have files A, B, and C. However,
drawdag will instead add the file D compared to the first
parent. Depending on whether B or C got a smaller nodeid, the contents
of D would be {A, B, D} or {A, C, D}. This patch changes it to to be
{A, B, C}.
Differential Revision: https://phab.mercurial-scm.org/D92
The 'self' argument is already taken care of by the 'super(...)' call. Instead
we were passing the repository instance as the 'desc' value.
This got discovered by breaking the next changeset.
cleanupnodes takes care of bookmark movement, and bookmark movement could
cause bookmark divergent resolution as a side effect. This patch adds such
bookmark divergent resolution logic so future rebase migration will be
easier.
The revset is carefully written to be equivalent to what rebase does today.
Although I think it might make sense to remove divergent bookmarks more
aggressively, for example:
F book@1
|
E book@2
|
| D book
| |
| C
|/
B book@3
|
A
When rebase -s C -d E, "book@1" will be removed, "book@3" will be kept,
and the end result is:
D book
|
C
|
F
|
E book@2 (?)
|
B book@3
|
A
The question is should we keep book@2? The current logic keeps it. If we
choose not to (makes some sense to me), the "deleterevs" revset could be
simplified to "newnode % oldnode".
For now, I just make it compatible with the existing behavior. If we want to
make the "deleterevs" revset simpler, we can always do it in the future.
evolution* config has been rewritten in stabilization* in the previous patch,
update tests file to use the new names.
Differential Revision: https://phab.mercurial-scm.org/D249
It's now common that an old node gets replaced by zero or more new nodes,
that could happen with amend, rebase, histedit, etc. And it's a common
requirement to do bookmark movements, strip or obsolete nodes and even
moving working copy parent.
Previously, amend, rebase, history have their own logic doing the above.
This patch is an attempt to unify them and future code.
This enables new developers to be able to do "replace X with Y" thing
correctly, without any knowledge about bookmarks, strip or obsstore.
The next step will be migrating rebase to the new API, so it works inside a
transaction, and its code could be simplified.
For long, the fact that strip does not work inside a transaction and some
code has to work with both obsstore and fallback to strip lead to duplicated
code like:
with repo.transaction():
....
if obsstore:
obsstore.createmarkers(...)
if not obsstore:
repair.strip(...)
Things get more complex when you want to call something which may call strip
under the hood. Like you cannot simply write:
with repo.transaction():
....
rebasemod.rebase(...) # may call "strip", so this doesn't work
But you do want rebase to run inside a same transaction if possible, so the
code may look like:
with repo.transaction():
....
if obsstore:
rebasemod.rebase(...)
obsstore.createmarkers(...)
if not obsstore:
rebasemod.rebase(...)
repair.strip(...)
That's ugly and error-prone. Ideally it's possible to just write:
with repo.transaction():
rebasemod.rebase(...)
saferemovenodes(...)
This patch is the first step towards that. It adds a "delayedstrip" method
to repair.py which maintains a postclose callback in the transaction object.
Before this patch, unbundling a stripped changeset would make it a
draft (unless the parent was secret). This meant that one would lose
phase information when stripping and unbundling secret changesets. The
same thing was true for public changesets. While stripping public
changesets is generally rare, it's done frequently by e.g. the
narrowhg extension.
We also include the phases in the temporary bundle, just in case
stripping were to fail after that point, so the user can still restore
the repo including phase information. Before this patch, the phases
were left untouched during the bundling and unbundling of the
temporary bundle. Only at the end of the transaction would
phasecache.filterunknown() be called to remove phase roots that were
no longer valid. We now need to call that also after the first
stripping, i.e. before applying the temporary bundle. Otherwise
unbundling the temporary bundle will cause a read of the phase cache
which has stripped changesets in the cache and that fails.
Like with obsmarkers, we unconditionally include the phases in the
bundle when stripping (when using bundle2, such as when generaldelta
is enabled). The reason for doing that for strip but not for bundle is
that strip bundles are not meant to be shared outside the repo, so we
don't care as much about compatibility.
Currently when we have multiple heads on the same branch, update tells us that
there some more heads for the current branch but does not tells us the head to
which the repository has been updated to. It makes more sense showing the
head we updated to and then telling there are some more heads.
We are about to remove the branchmap cache update in changegroup application.
There is a debug message alongside this update that we do not want to loose. We
move the message beforehand to simplify the test update in the next changeset.
The message move is quite noisy and isolating that noise is useful.
Most tests update are just line reordering since the message is issued at a
later point during the transaction.
After this changes, the message is displayed in more case since local commit
creation also issue it.
The ability to negate any boolean flags itself is great, but I think we are not
ready to expose the help side of it yet.
First, while there exist a handful of such flags whose default value can be
changed (eg: git diff, patchwork confirmation), there is only a few of them. The
users who benefit the most from this change are alias users and large
installation that can deploy extension to change behavior (eg: facebook
tweakdefault). So the majority of user who will be affected by a large change
to command help that is not yet relevant to them. (I expect this to become
relevant when ui.progressive start to exists).
Below is an example of the impact of the new help on 'hg help diff':
-r --rev REV [+] revision
-c --change REV change made by revision
-a --[no-]text treat all files as text
-g --[no-]git use git extended diff format
--[no-]nodates omit dates from diff headers
--[no-]noprefix omit a/ and b/ prefixes from filenames
-p --[no-]show-function show which function each change is in
--[no-]reverse produce a diff that undoes the changes
-w --[no-]ignore-all-space ignore white space when comparing lines
-b --[no-]ignore-space-change ignore changes in the amount of white space
-B --[no-]ignore-blank-lines ignore changes whose lines are all blank
-U --unified NUM number of lines of context to show
--[no-]stat output diffstat-style summary of changes
--root DIR produce diffs relative to subdirectory
-I --include PATTERN [+] include names matching the given patterns
-X --exclude PATTERN [+] exclude names matching the given patterns
-S --[no-]subrepos recurse into subrepositories
Another issue with the current state of help, the default value for the
flag is not conveyed to the user. For example in the 'backout' help, there is
no real distinction between "--[no-]backup" (default to True) and "--[no-]keep"
(default) to False:
--[no-]backup no backups
--[no-]keep do not modify working directory during strip
In addition, I've discussed with Augie Fackler and the last batch of the work on
this have burned him out quite some. Therefore he is not intending to perform
any more work on this topic. Quoting him, he would rather see the help part
backed out than spending more time on it.
I do not think we are ready to expose this to users in 4.0 (freeze in a week),
especially because we cannot expect quick improvement on these aspect as this
topic no longer have an owner. We should be able to reintroduce that change in
the future when someone get back on it and the main issues are solves:
* Introduction of ui.progressive makes it relevant for a majority of user,
* Current default value are efficiently conveyed to the user.
(In addition, the excerpt from diff help show that we still have some issue with
some negative option like '--nodates' so further improvement are probably
welcome there.)
That is, help gets tweaked thus:
global options ([+] can be repeated):
-v --[no-]verbose enable additional output
Other proposals have included:
global options ([+] can be repeated, options marked [?] are boolean flags):
-v --verbose[?] enable additional output
and
global options ([+] can be repeated, options marked [^] are boolean flags):
-v --verbose[^] enable additional output
which avoid the unfortunate visual noise in this patch. In this
version's favor, it's consistent with what I'm used to seeing in man
pages and similar documentation venues.
The partial bundle is not a subset of the full bundle, and the full
bundle is not full in any way that i see. The most obvious
interpretation of "full" I can think of is that it has all commits
back to the null revision, but that is not what the "full" bundle
is. The "full" bundle is simply a backup of what the user asked us to
strip (unless --no-backup). The "partial" bundle contains the
revisions we temporarily stripped because they had higher revision
numbers that some commit that the user asked us to strip.
The "full" bundle is already called "backup" in the code, so let's use
that in user-facing messages too. Let's call the "partial" bundle
"temporary" in the code.
If strip fails when applying the temporary bundle, the commits in the
temporary bundle have not yet been applied, so the user will almost
definitely want to apply the bundle. We should be more clear to the
user about that than our current "partial bundle stored in...".
Note that we will probably not be able to recover it automatically,
since whatever made it fail (e.g. a hook) will most likely make it
fail again. We need to give control back to the user to fix the
problem before trying again.
If strip fails while recovering the temporary bundle (e.g. because a
hook fails), we tell the user only about the backup bundle, not about
the temporary bundle. Since the user did not ask to strip the commits
in the temporary bundle, that's the more important bundle to mention,
so let's do that (and also mention the backup bundle as usual).
The bundle2 changegroup part has an advisory param saying how many
changesets are in the part. Before this patch, we were setting
this part when generating bundle2 parts via the wire protocol but
not when generating local bundle2 files.
A side effect of not setting the changeset count part is that progress
bars don't work when applying changesets. As the tests show, this
impacted clone bundles, shelve, backup bundles, `hg unbundle`, and
anything touching bundle2 files.
This patch adds a backdoor to allow us to pass state from
changegroup generation into the unbundler. We store the number
of changesets in the changegroup in this state and use it to
populate the aforementioned advisory part parameter when generating
the bundle2 bundle.
I concede that I'm not thrilled by how state is being passed in
changegroup.py (it feels a bit hacky). I would love to overhaul the
rather confusing set of functions in changegroup.py with something that
passes rich objects around instead of e.g. low-level generators.
However, given the code freeze for 3.9 is imminent, I'd rather not
undertake this endeavor right now. This feels like the easiest way
to get the parameter added to the changegroup part.
`hg debugbundle` is calling repr() on bundle2 part params, which are
now util.sortdict instances. Unfortunately, repr() doesn't appear
to be deterministic for util.sortdict. So, we implement one.
We include the type name because that's the common convention for
__repr__ implementations. Having the type name in `hg debugbundle`
is a bit ugly. But it's a debug command and I don't care enough to
fix it.
When we remove a changeset from the changelog, the phase cache must be
invalidated, otherwise it could refer to changesets that are no longer in the
repo.
To reproduce the failure, I created an extension querying the phase cache after
the strip transaction is over.
To do that, I stripped two commits with a bookmark on one of them to force
another transaction (we open a transaction for moving bookmarks)
after the strip transaction.
Without the fix in this patch, the test leads to a stacktrace showing the issue:
repair.strip(ui, repo, revs, backup)
File "/Users/lcharignon/facebook-hg-rpms/hg-crew/mercurial/repair.py", line 205, in strip
tr.close()
File "/Users/lcharignon/facebook-hg-rpms/hg-crew/mercurial/transaction.py", line 44, in _active
return func(self, *args, **kwds)
File "/Users/lcharignon/facebook-hg-rpms/hg-crew/mercurial/transaction.py", line 490, in close
self._postclosecallback[cat](self)
File "$TESTTMP/crashstrip2.py", line 4, in test
[repo.changelog.node(r) for r in repo.revs("not public()")]
File "/Users/lcharignon/facebook-hg-rpms/hg-crew/mercurial/changelog.py", line 337, in node
return super(changelog, self).node(rev)
File "/Users/lcharignon/facebook-hg-rpms/hg-crew/mercurial/revlog.py", line 377, in node
return self.index[rev][7]
IndexError: revlog index out of range
The situation was encountered in inhibit (evolve's repo) where we would crash
following the volatile set invalidation submitted by Augie in
cbc52a99d057d11790cf5011e877c6f698bf57bf. Before his patch the issue was masked
as we were not accessing the phasecache after stripping a revision.
This bug uncovered another but in histedit (see explanation in issue5235).
I changed the histedit test accordingly to avoid fixing two things at once.
Before this patch, deprecated options below are used in synopsis of
command help, even though they aren't listed up as available options
by default. These might confuse readers.
- -n (no-op, now) of strip
- -a/--active of branches
- -f/--force of merge
When strip builds the list of changedfiles to pass into dirstate.rebuild, it adds
files blindly, including those that have been removed. This tests ensures that
rebuild can handle this case.
A concern around the user experience of Mercurial is user getting stuck on there
own topological branch forever. For example, someone pulling another topological
branch, missing that message in pull asking them to merge and getting stuck on
there own local branch.
The current way to "address" this concern was for bare 'hg update' to target the
tipmost (also latest pulled) changesets and complain when the update was not
linear. That way, failure to merge newly pulled changesets would result in some
kind of failure.
Yet the failure was quite obscure, not working in all cases (eg: commit right
after pull) and the behavior was very impractical in the common case
(eg: issue4673).
To be able to change that behavior, we need to provide other ways to alert a
user stucks on one of many topological head. We do so with an extra message after
bare update:
1 other heads for branch "default"
Bookmark get its own special version:
1 other divergent bookmarks for "foobar"
There is significant room to improve the message itself, and we should augment
it with hint about how to see theses other heads or handle the situation (see
in-line comment). But having "a" message is already a significant improvement
compared to the existing situation. Once we have it we can iterate on a better
version of it. As having such message is an important step toward changing the
default destination for update and other nicety, I would like to move forward
quickly on getting such message.
This was discussed during London - October 2015 Sprint.
The bundle10 format (plain changegroup-01) does not support general delta and
result into expensive delta re-computation when stripping. If the repository is
general delta, we store backups as bundle20 containing a changegroup-02 payload.
We remove the experimental feature related to strip backup bundle format because
this achieve the same goal in a leaner way. Removing the experimental option is
fine, that is why it experimental in the first place.
Compression of these bundles are coming in later changesets.
