Before this patch, sanitizing ".hg/hgrc" scans directories and files
also in meta data area for non-hg subrepos: under ".svn" for
Subversion subrepo, for example.
This may cause not only performance impact (especially in large scale
subrepos) but also unexpected removing meta data files.
This patch avoids sanitizing ".hg/hgrc" in meta data area for non-hg
subrepos.
This patch stops checking "ignore" target at the first
(case-insensitive) appearance of it, because continuation of scanning
is meaningless in almost all cases.
Before this patch, "hg update" doesn't sanitize ".hg/hgrc" in non-hg
subrepos correctly, if "hg update" is executed not at the root of the
parent repository.
"_sanitize()" takes relative path to subrepo from the root of the
parent repository, and passes it to "os.walk()". In this case,
"os.walk()" expects CWD to be equal to the root of the parent
repository.
So, "os.walk()" can't find specified path (or may scan unexpected
path), if CWD isn't equal to the root of the parent repository.
Non-hg subrepo under nested hg-subrepos may cause same problem, too:
CWD may be equal to the root of the outer most repository, or so.
This patch makes "_sanitize()" take absolute path to the root of
subrepo to sanitize correctly in such cases.
This patch doesn't normalize the path to hostile files as the one
relative to CWD (or the root of the outer most repository), to fix the
problem in the simple way suitable for "stable".
Normalizing should be done in the future: maybe as a part of the
migration to vfs.
Before this patch, sanitizing ".hg/hgrc" in git subrepo doesn't work,
when the working directory is updated by "git merge --ff".
"_sanitize()" is not invoked after checking target revision out into
the working directory in this case, even though it is invoked
indirectly via "checkout" (or "rawcheckout") in other cases.
This patch invokes "_sanitize()" explicitly also after "git merge
--ff" execution.
"_sanitize()" was introduced by 5131f2755f60 on "stable" branch, but
it has done nothing for sanitizing since 5131f2755f60.
"_sanitize()" assumes "Visitor" design pattern:
"os.walk()" should invoke specified function ("v" in this case)
for each directory elements under specified path
but "os.walk()" assumes "Iterator" design pattern:
callers of it should drive loop to scan each directory elements
under specified path by themselves with the returned generator
object
Because of this mismatching, "_sanitize()" just discards the generator
object returned by "os.walk()" and does nothing for sanitizing.
This patch makes "_sanitize()" work.
This patch also changes the format of warning message to show each
unlinked files, for multiple appearances of "potentially hostile
.hg/hgrc".
When a subrepo has changed on the local and remote revisions, prompt the user
whether it wants to merge those subrepo revisions, keep the local revision or
keep the remote revision.
Up until now mercurial would always perform a merge on a subrepo that had
changed on the local and the remote revisions. This is often inconvenient. For
example:
- You may want to perform the actual subrepo merge after you have merged the
parent subrepo files.
- Some subrepos may be considered "read only", in the sense that you are not
supposed to add new revisions to them. In those cases "merging a subrepo" means
choosing which _existing_ revision you want to use on the merged revision. This
is often the case for subrepos that contain binary dependencies (such as DLLs,
etc).
This new prompt makes mercurial better cope with those common scenarios.
Notes:
- The default behavior (which is the one that is used when ui is not
interactive) remains unchanged (i.e. merge is the default action).
- This prompt will be shown even if the ui --tool flag is set.
- I don't know of a way to test the "keep local" and "keep remote" options (i.e.
to force the test to choose those options).
# HG changeset patch
# User Angel Ezquerra <angel.ezquerra@gmail.com>
# Date 1378420708 -7200
# Fri Sep 06 00:38:28 2013 +0200
# Node ID 2fb9cb0c7b26303ac3178b7739975e663075857d
# Parent 796d34e1b749b79834321ef1181ed8433a5515d9
merge: let the user choose to merge, keep local or keep remote subrepo revisions
When a subrepo has changed on the local and remote revisions, prompt the user
whether it wants to merge those subrepo revisions, keep the local revision or
keep the remote revision.
Up until now mercurial would always perform a merge on a subrepo that had
changed on the local and the remote revisions. This is often inconvenient. For
example:
- You may want to perform the actual subrepo merge after you have merged the
parent subrepo files.
- Some subrepos may be considered "read only", in the sense that you are not
supposed to add new revisions to them. In those cases "merging a subrepo" means
choosing which _existing_ revision you want to use on the merged revision. This
is often the case for subrepos that contain binary dependencies (such as DLLs,
etc).
This new prompt makes mercurial better cope with those common scenarios.
Notes:
- The default behavior (which is the one that is used when ui is not
interactive) remains unchanged (i.e. merge is the default action).
- This prompt will be shown even if the ui --tool flag is set.
- I don't know of a way to test the "keep local" and "keep remote" options (i.e.
to force the test to choose those options).
The test didn't break when I originally committed it (git version
1.7.12.4 (Apple Git-37)), and still doesn't on that machine, but the
output changes elsewhere with "Warning: you are leaving N commits
behind..."
This change sets a ref on the commit we're updating the subrepo _away_
from to quash the warning.
We were always using only the first 12 characters of the subrepo revision id
when generating the "subrepo diverged" promptchoice. This is not necessarily
correct for non mercurial subrepos.
This change appends the subrepo path to subrepo errors. That is, when there
is an error performing an operation a subrepo, rather than displaying a message
such as:
pushing subrepo MYSUBREPO to PATH
searching for changes
abort: push creates new remote head HEADHASH!
hint: did you forget to merge? use push -f to force
mercurial will show:
pushing subrepo MYSUBREPO to PATH
searching for changes
abort: push creates new remote head HEADHASH! (in subrepo MYSUBREPO)
hint: did you forget to merge? use push -f to force
The rationale for this change is that the current error messages make it hard
for TortoiseHg (and similar tools) to tell the user which subrepo caused the
push failure.
The "(in subrepo MYSUBREPO)" message has been added to those subrepo methods
were it made sense (by using a decorator). We avoid appending "(in subrepo XXX)"
multiple times when subrepos are nexted by throwing a "SubrepoAbort" exception
after the extra message is appended. The decorator will then "ignore" (i.e. just
re-raise) the exception and never add the message again.
A small drawback of this method is that part of the exception trace is lost when
the exception is catched and re-raised by the annotatesubrepoerror decorator.
Also, because the state() function already printed the subrepo path when it
threw an error, that error has been changed to avoid duplicating the subrepo
path in the error message.
Note that I have also updated several subrepo related tests to reflect these
changes.
Add a match object to subrepo.archive(). This will allow the -X and -I
options to be honored inside subrepos when archiving. They formerly
only affect the top level repo.
hg forget 'notafile*' is changed to use a name that is valid on Windows so we
still get the same error ... but the error message is disabled because it
varies with the Windows version.
Many tests didn't change back from subdirectories at the end of the tests ...
and they don't have to. The missing 'cd ..' could always be added when another
test case is added to the test file.
This change do that tests (99.5%) consistently end up in $TESTDIR where they
started, thus making it simpler to extend them or move them around.
git version 1.7.9.1 makes the testsuite fail with:
@@ -482,7 +482,17 @@
Sticky repository, update --clean
$ hg update --clean tip
- Previous HEAD position was aa84837... f
+ Warning: you are leaving 2 commits behind, not connected to
+ any of your branches:
+
+ aa84837 f
+ 126f2a1 gg
+
+ If you want to keep them by creating a new branch, this may be a good time
+ to do so with:
+
+ git branch new_branch_name aa84837ccfbdfedcdcdeeedc309d73e6eb069edc
+
HEAD is now at 32a3438... fff
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg id -n
ERROR: test-subrepo-git.t output changed
When the contents of .hgsubstate are stale (either because they've
manually been tweaked or partial updates have confused it), we get
confused about whether it actually needs committing.
So instead, we actively consult the parent's substate and compare it
the actual current state when deciding whether it needs committing.
Side effect: lots of "committing subrepo" messages that didn't
correspond with real commits disappear.
This change is fairly invasive for a fairly obscure condition, so it's
kept on the default branch.
This changeset flips the default value of ui.commitsubrepos setting
from True to False and adds a --subrepos flag to commit.
The commit, status, and diff commands behave like this with regard to
recusion and the ui.commitsubrepos setting:
| recurses | recurses
| by default | with --subrepos
--------+---------------+----------------
commit: | commitsubrepo | True
status: | False | True
diff: | False | True
By changing the default from True to False, the table becomes
consistent in the two columns:
* without --subrepos on the command line, commit will abort if a
subrepo is dirty and status/diff wont show changes inside subrepos.
* with --subrepos, all three commands will recurse.
A --subrepos flag on the command line overrides the config settin.g
This changes the prompts on git subrepos to show only the first seven
digits of git changeset IDs (as git's command line does):
$ hg update
subrepository sources for s differ (in checked out version)
use (l)ocal source (32a3438) or (r)emote source (da5f5b1)?
Consider a repository with a single subrepository. The changesets in
the main repository reference the subrepository changesets like this:
m0 -> s0
m1 -> s1
m2 -> s2
Starting from a state (m1, s0), doing 'hg update m2' in the main
repository will yield a conflict: the subrepo is at revision s0 but
the target revision says it should be at revision s2.
Before this change, Mercurial would do (m1, s0) -> (m2, s2) and thus
ignore the conflict between the working copy and the target revision.
With this change, the user is prompted to resolve the conflict by
choosing which revision he wants. This is consistent with 'hg merge',
which also prompts the user when it detects conflicts in the merged
.hgsubstate files.
The prompt looks like this:
$ hg update tip
subrepository sources for my-subrepo differ
use (l)ocal source (fc627a69481f) or (r)emote source (12a213df6fa9)?
This makes 'hg update --clean' behave the same way for all three kinds
of subrepositories [hg, svn, git]. Before git subrepos did not take
the clean parameter into account, but just updated to the given
revision and merged uncommitted changes into that.
This patch conforms gitsubrepo code to the variable naming scheme of the other
subrepo implementations. All user-facing path references should be relative
to the root repository.
This continues the strategy of separation between hg pull and hg update in
git subrepos by only dealing with git's branches on an update. This behavior
tries to cover the bare essentials of the semantics of git pull in the subrepo
when the parent repo does hg pull and hg update.
Avoids calls to git push when the revision is already known to be
in the remote repository. Now, when using a read-only git subrepo,
git will never need to talk to its upstream repository.