The check-code tool now expects the "desc" keyword to be followed by the
"websub" filter, with the following exceptions:
a) It has no filters at all, e.g. a changeset description in the raw style
templates or the repository description in the summary page.
b) It is followed by the "firstline" filter, e.g. the first line of the
changeset description is displayed as a summary or title.
This matters as `author(mpm)` have a lot of matches evenly split in the repo,
while `author(lmoscoviz)` have less match (and later). This changes the execution
path of the "or" operator a lot.
Calling a function is super expensive in python. We inline the trivial range
comparison to get back to more sensible performance on common revset operation.
Benchmark result below:
Revision mapping:
0) bced32a3fd6c 2.9.2 release
1) 2ab64f462d81 current @
2) This revision
revset #0: public()
0) wall 0.010890 comb 0.010000 user 0.010000 sys 0.000000 (best of 201)
1) wall 0.012109 comb 0.010000 user 0.010000 sys 0.000000 (best of 199)
2) wall 0.012211 comb 0.020000 user 0.020000 sys 0.000000 (best of 197)
revset #1: :10000 and public()
0) wall 0.007141 comb 0.010000 user 0.010000 sys 0.000000 (best of 361)
1) wall 0.014139 comb 0.010000 user 0.010000 sys 0.000000 (best of 186)
2) wall 0.008334 comb 0.010000 user 0.010000 sys 0.000000 (best of 308)
revset #2: draft()
0) wall 0.009610 comb 0.010000 user 0.010000 sys 0.000000 (best of 279)
1) wall 0.010942 comb 0.010000 user 0.010000 sys 0.000000 (best of 243)
2) wall 0.011036 comb 0.010000 user 0.010000 sys 0.000000 (best of 239)
revset #3: :10000 and draft()
0) wall 0.006852 comb 0.010000 user 0.010000 sys 0.000000 (best of 383)
1) wall 0.014641 comb 0.010000 user 0.010000 sys 0.000000 (best of 183)
2) wall 0.008314 comb 0.010000 user 0.010000 sys 0.000000 (best of 299)
We can see this changeset gains back the regression for `and` operation on
spanset. We are still a bit slowerfor the `public()` and `draft()`. Predicates
not touched by this changeset.
There can be good reasons to disable premerge no matter which merge tool is
used. Most tools will do just fine without premerge and handle the simple
merges more or less automatic and silent. We _could_ thus disable premerge for
most tools. But without premerge, the merge tool will be launched for each file
- that makes it a slow and expensive process to perform big simple merges. It
is thus better to consistently stick to the default premerge=True.
The mergetools.hgrc configuration for most tools implicitly use the default
premerge=True but Araxis and the Linux entry for Beyond Compare had
premerge=False. These lines has been removed.
These settings were introduced by de7cda55270e without further explanation of
why they should be good.
(We have seen some crashes on Windows with Araxis where a merge failed after a
lot of Araxis flashing. I haven't been able to reproduce it and do not know
exactly what happened. Enabling premerge avoids the problems.)
Before this patch, "contrib/check-code.py" can't detect "% inside _()"
correctly, when there are leading whitespaces before the format
string, like below:
_(
"format string %s" % v)
This patch adds regexp pattern "[ \t\n]*" before the pattern matching
against the format string.
"[\s\n]" can't be used in this purpose, because "\s" is automatically
replaced with "[ \t]" by "_preparepats()" and "\s" in "[]" causes
nested "[]" unexpectedly.
Previously revset._descendants would iterate over the entire subset (which is
often the entire repo) and test if each rev was in the descendants list. This is
really slow on large repos (3+ seconds).
Now we iterate over the descendants and test if they're in the subset.
This affects advancing and retracting the phase boundary (3.5 seconds down to
0.8 seconds, which is even faster than it was in 2.9). Also affects commands
that move the phase boundary (commit and rebase, presumably).
The new revsetbenchmark indicates an improvement from 0.2 to 0.12 seconds. So
future revset changes should be able to notice regressions.
I removed a bad test. It was recently added and tested '1:: and reverse(all())',
which has an amibiguous output direction. Previously it printed in reverse order,
because we iterated over the subset (the reverse part). Now it prints in normal
order because we iterate over the 1:: . Since the revset itself doesn't imply an
order, I removed the test.
Before this patch, "contrib/check-code.py" can't detect these
problems, because the regexp pattern to detect "% inside _()" doesn't
suppose the case that format string consists of multiple string
components concatenated implicitly or explicitly,
This patch does below for that regexp pattern to detect "% inside _()"
problems in such case.
- put "+" into separator part ("[ \t\n]") for explicit concatenation
("...." + "...." style)
- enclose "component and separator" part by "(?:....)+" for
concatenation itself ("...." "...." or "...." + "....")
Before this patch, "contrib/check-code.py" can't detect these
problems, because the regexp pattern to detect "% inside _()" doesn't
suppose the case that the format string and "%" aren't placed in the
same line.
This patch replaces "\s" in that regexp pattern with "[ \t\n]" to
detect "% inside _()" problems in such case.
"[\s\n]" can't be used in this purpose, because "\s" is automatically
replaced with "[ \t]" by "_preparepats()" and "\s" in "[]" causes
nested "[]" unexpectedly.
The script is now in python. That translation is very raw, more improvement to
comes:
The "current code" and "base" entry have been dropped. This is trivial to get
same result using a tagged revision or "." in the list of benchmarked revision.
With the new lazy revset implementation, we need to actually read all elements
to trigger all the computations. Otherwise a no-op if of course much faster than
the full work.
Newly added "hgperf" command repeats "dispatch.runcommand()" for
specified Mercurial command and measure performance of it in the same
manner of "contrib/perf.py" extension.
Users (mainly developers) can examine performance of the target
command easily, without adding new entry for it to "contrib/perf.py"
extension.
Use the env binary to figure out the correct bash to use.
Certain systems ships with an ancient version of bash, but the
user might have installed a newer one that is earlier in $PATH.
For example the current version of Mac OS X ships version 3.2.51
of bash, which does not understand new fancy builtins such as
readarray. A user might install a newer version of bash, use that
as their shell and add that path before bin.
If a developer doesn't have the perf extension enabled the revset
benchmarking will fail. This patch explicitly enables the
perf extension when running the tests.
All revsets added to benchmark so far are aimed to show an improvement of
performance from laziness. We had more wider version to track impact of laziness
on them.
Port a patch from gitk. Original description:
On windows, mouse input follows the keyboard focus, so to allow selecting
text from the patch canvas we must not shift focus back to the top level.
This change has no negative impact on X, so we don't explicitly test
for Win32 on this change. This provides similar selection capability
as already available using X-Windows.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Port a patch from gitk. Original description:
Cygwin's Tcl is configured to honor any occurence of ctrl-z as an
end-of-file marker, while some commits in the git repository and possibly
elsewhere include that character in the commit comment. This causes gitk
ignore commit history following such a comment and incorrect graphs. This
change affects only Windows as Tcl on other platforms already has
eofchar == {}. This fixes problems noted by me and by Ray Lehtiniemi, and
the fix was suggested by Shawn Pierce.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The script now selection revision to run benchmark against using a revset query
instead of a revision range.
It is expected that people benchmarking revset have some knowledge of revset.
This script takes two arguments (starting revision, ending revision) and tests
for each revision in between the entire list of revsets in the script using
perfrevset.
Without this patch, 2to3's rewrites to httpclient cause it to fail to
import. With this patch, it's probably hopelessly broken, but at least
won't block forward progress on non-http2 functionality on Python 3.
Solaris diff -u isn't silent when two files are identical, and tests that
don't account for that will fail. Fix those tests, and introduce a check
that prevents reintroduction.
When we add two newlines after ".. note::" translators will not see this
entry. And all versions of docutils interpret this paragraph correctly
(details in 89e31d6e438f).
on windows, largefile paths are written as "file:///C:/temp/...", corresponding
to "file:///$TESTTMP/..." (all three slashes shown).
But on posix systems they are written as "file:///tmp/..." corresponding to
"file://$TESTTMP/..." (only two slashes shown).
Write the glob "file:/*/" to match both versions.