Summary:
D13853115 adds `edenscm/` to `sys.path` and code still uses `import mercurial`.
That has nasty problems if both `import mercurial` and
`import edenscm.mercurial` are used, because Python would think `mercurial.foo`
and `edenscm.mercurial.foo` are different modules so code like
`try: ... except mercurial.error.Foo: ...`, or `isinstance(x, mercurial.foo.Bar)`
would fail to handle the `edenscm.mercurial` version. There are also some
module-level states (ex. `extensions._extensions`) that would cause trouble if
they have multiple versions in a single process.
Change imports to use the `edenscm` so ideally the `mercurial` is no longer
imported at all. Add checks in extensions.py to catch unexpected extensions
importing modules from the old (wrong) locations when running tests.
Reviewed By: phillco
Differential Revision: D13868981
fbshipit-source-id: f4e2513766957fd81d85407994f7521a08e4de48
Summary:
tweakdefaults used to do this if configured.
After dicussion with the team, we decided that returning 1 was not a helpful design decision, so we're going to fold this in here and everywhere.
Reviewed By: singhsrb
Differential Revision: D13050548
fbshipit-source-id: 66e834ea503e4b1339e369495a9729b951024a6d
Summary:
This makes tests closer to production setup and removes a bunch of "saved
backup bundle to ..." messages.
With D9236657, this should not hurt server-side performance.
Unfortunately a lot tests cannot be migrated easily, mostly because revision
numbers are used. They are left with a TODO.
Reviewed By: DurhamG
Differential Revision: D9237694
fbshipit-source-id: c993fce18f07aba09f6d70964e248af8d501575a
Summary:
Like D9323267, hg tests commonly reinvent common aliases to render the DAG, and they often differ very slightly. This makes adding a test require more boilerplate, and reading a test in a foreign new area slightly more overhead.
Let's standardize these to reduce the copypasta.
It's necessary to define this as a shell function instead of an hgrc alias to prevent tests that list aliases from printing it. Plus that enforces a nice separation of test/stdlib logic.
Bookmarks and branches are easy enough to add since they're empty if not used. A good number added `{phase}` -- I renamed this to `tglogp`.
Reviewed By: quark-zju
Differential Revision: D9347072
fbshipit-source-id: 6aac7de3e65d2295a7ebecd2ab30901709af3ff1
Summary:
Since we have `debugbuilddag` as a builtin command, and `drawdag` is
pretty useful for writing clean test cases. Let's inline it. This would
simplify many tests since `drawdag=..." is no longer needed.
Reviewed By: DurhamG
Differential Revision: D6827925
fbshipit-source-id: b749f57fd5c55b2cb000dd2da2c2f9bc2386a519
Summary: Also change the internal API so it no longer accepts the "heads" argument.
Reviewed By: ryanmce
Differential Revision: D6745865
fbshipit-source-id: 368742be49b192f7630421003552d0a10eb0b76d
# skip-blame because this was mechanically rewritten the following script. I
ran it on both *.t and *.py, but none of the *.py changes were proper. All *.t
ones appear to be, and they run without addition failures on both Windows and
Linux.
import argparse
import os
import re
ap = argparse.ArgumentParser()
ap.add_argument('path', nargs='+')
opts = ap.parse_args()
globre = re.compile(r'^(.*) \(glob\)(.*)$')
for p in opts.path:
tmp = p + '.tmp'
with open(p, 'rb') as src, open(tmp, 'wb') as dst:
for line in src:
m = globre.match(line)
if not m or '$LOCALIP' in line or '*' in line:
dst.write(line)
continue
if '?' in line[:-3] or ('?' in line[:-3] and line[-3:] != '(?)'):
dst.write(line)
continue
dst.write(m.group(1) + m.group(2) + '\n')
os.unlink(p)
os.rename(tmp, p)
Commit hashes are a useful way to ensure the content of commits made in the
tests are not changing, even if we don't query every aspect of every commit.
(And some properties, like extras, are rarely printed at all.)
Many of the rebase log -G calls didn't show hashes; by adding hashes to places
that weren't showing them we can help protect those tests from unwanted
changes.
Differential Revision: https://phab.mercurial-scm.org/D1650
We replace 'experimental.stabilization=all' by 'experimental.evolution=true'
as we will extract individual config in their own config in later patches.
Differential Revision: https://phab.mercurial-scm.org/D1148
Upon pull or unbundle, we display a message with the range of new revisions
fetched. This revision range could readily be used after a pull to look out
what's new with 'hg log'. The algorithm takes care of filtering "obsolete"
revisions that might be present in transaction's "changes" but should not be
displayed to the end user.
It seems like we used to pick the oldest possible version of the
changegroup to use for bundles created by the repair module (used
e.g. by "hg strip" and for temporary bundles by "hg rebase"). I tried
to preserve that behavior when I created the changegroup.safeversion()
method in 77f74106b264 (changegroup: introduce safeversion(),
2016-01-19).
However, we have recently chagned our minds and decided that these
commands are only used locally and downgrades are unlikely. That
decicion allowed us to start adding obsmarker and phase information to
these bundles. However, as the bug report shows, it means we get
different behavior e.g. when generaldelta is not enabled (because when
it was enabled, it forced us to use bundle2). The commit that actually
caused the reported bug was 26d535788092 (strip: include phases in
bundle (BC), 2017-06-15).
So, since we now depend on having more information in the bundles,
let's make sure we instead pick the newest possible changegroup
version.
Differential Revision: https://phab.mercurial-scm.org/D715
In addition to a test case for the direct problem described in the bug
report, this also adds a test case showing how obsmarkers can also get
lost when not using generaldelta.
Differential Revision: https://phab.mercurial-scm.org/D714
I'm not sure if the difference on Windows for test-sparse.t is expected or not.
It looks like unless the leading '/' is followed by a drive letter, '/' is
resolved to 'C:/MinGW/msys/1.0'. But both cases abort with "not under root"
instead of just warning.
This patch migrates rebase to use scmutil.cleanupnodes API. It simplifies
the code and makes rebase code reusable inside a transaction.
This is a BC because the backup file is no longer strip-backup/*-backup.hg,
but strip-backup/*-rebase.hg. The latter looks more reasonable since the
directory name is "strip-backup" so there is no need to repeat "backup".
I think the backup file name change is probably fine as a BC, since we have
changed it before (2e51c9a7a08f) and didn't get complains. The end result
of this series will be a much more consistent and unified backup names:
command | old backup file suffix | new backup file suffix
-------------------------------------------------------------------
amend | amend-backup.hg | amend.hg
histedit | backup.hg (could be 2 files) | histedit.hg (single file)
rebase | backup.hg | rebase.hg
strip | backup.hg | backup.hg
(note: backup files are under .hg/strip-backup)
It also fixes issue5606 as a side effect because the new "delayedstrip" code
path will carefully examine nodes (safestriproots) to make sure orphaned
changesets won't get stripped by accident.
Some warning messages are changed to the new "warning: orphaned descendants
detected, not stripping HASHES", which provides more information about
exactly what changesets are left behind.
Another minor behavior change is when there is an obsoleted changeset with a
successor in the destination branch, bookmarks pointing to that obsoleted
changeset will not be moved. I have commented in test-rebase-obsolete.t
explaining why that is more desirable.
Previously rebase source and destination could not overlap. But with the
multi-destination support, source and destination could reasonably partially
overlap. That requires another topological sort on `{sourcerev: destrev}`
graph (destmap). This patch implements that.
If a revision's destination is itself, the error message gets changed from
"source is ancestor of destination" to "source and destination form a
cycle". Not marking as BC since automation should depend on exit code, not
error message.
Differential Revision: https://phab.mercurial-scm.org/D470
The old error message "cannot use revision REV as base, result would have 3
parents" is confusing - why use REV as base? why add a new parent?.
This patch changes it to "cannot move parent", which seems better.
Differential Revision: https://phab.mercurial-scm.org/D342
evolution* config has been rewritten in stabilization* in the previous patch,
update tests file to use the new names.
Differential Revision: https://phab.mercurial-scm.org/D249
In the process of fixing issue5610 in 4.2.2, we are trying to backout
507f16f4aa51. This changeset is making changes that depend on 507f16f4aa51,
so we need to back it out first.
Since issue5610 is pretty serious regression and the next stable release is a
couple of days away, we are taking the backout route until we can figure out
something better to do.
Previously, rebase assumes the following pattern:
rebase:
with transaction as tr: # top-level
...
tr.__close__ writes rebasestate
unlink('rebasestate')
However it's possible that "rebase" was called inside a transaction:
with transaction as tr1:
rebase:
with transaction as tr2: # not top-level
...
tr2.__close__ does not write rebasestate
unlink('rebasestate')
tr1.__close__ writes rebasestate
That leaves a rebasestate on disk incorrectly.
This patch adds "removefilegenerator" to notify transaction code that the
state file is no longer needed therefore fixes the issue.
Recently we switched rebases to run the entire rebase inside a single
transaction, which dramatically improved the speed of rebases in repos with
large working copies. Let's also move the dirstate into a single dirstateguard
to get the same benefits. This let's us avoid serializing the dirstate after
each commit.
In a large repo, rebasing 27 commits is sped up by about 20%.
I believe the test changes are because us touching the dirstate gave the
transaction something to actually rollback.
Previously, if .hg/rebasestate existed but .hg/last-message.txt was missing, 'hg
rebase --abort' would say there's no rebase in progress but 'hg checkout foo'
would say 'abort: rebase in progress'. It turns out loading the collapse message
will throw a "no rebase in progress" error if the file doesn't exist, even
though .hg/rebasestate obviously indicates a rebase is in progress.
The fix is to only throw an exception if we're trying to --continue, and to just
eat the issues if we're doing --abort.
This issue is exposed by us writing the rebase state earlier in the process.
This will be used by later patches to ensure the user can appropriately 'hg
rebase --abort' if there's a crash before the first the first commit has
finished rebasing. Tests cover all of this. The only negative affect is we now
require a hg rebase --abort in a very specific exception case, as shown in the
test.
Only FreeBSD seems to be this picky. Note that this explicit
absolute-path `cd` exposes a defect in the test, in that we end up
still inside the cwd-vanish repository, but that's not a regression in
this change. Since we're in a code freeze, I'm doing the smallest
thing possible to try and fix bugs on FreeBSD, rather than cleaning up
the entire problem. I'll follow up with a more complete fix after the
freeze.
On some platforms, cwd can't be removed. In which case, util.unlinkpath()
continues with no error since the failure of directory removal isn't critical.
So it doesn't make sense to run the test added by 6395630fdfdc on those
platforms. OTOH, we need to run the test in test-rebase-scenario-global.t
since the repository is referenced after that.
During update directories are deleted as soon as they have no entries.
But if current working directory is deleted then it cause problems
in complex commands like 'hg split'. This commit adds a warning
that will help users figure the problem faster.
There are two reasons that rebase should be done this way:
1. This would make rebasing faster because it would minimize the total
number of files to be checked out in the process, as it don't need
to switch back and forth between branches.
2. It makes resolving conflicts easier as user has a better context.
This commit changes the behavior in "Test multiple root handling" of
test-rebase-obsolete.t. It is an expected change which reflects the new
behavior that commits in a branch are grouped together when rebased.
This changeset finally make 'hg rebase' choose its default destination using the
same logic as 'hg merge'. The previous default was "tipmost changeset on the
current branch", the new default is "the other head if there is only one". This
change has multiple consequences:
- Multiple tests which were not rebasing anything (rebasing from tipmost head)
are now rebasing on the other "lower" branch. This is the expected new
behavior.
- A test is now explicitly aborting when there is too many heads on the branch.
This is the expected behavior.
- We gained a better detection of the "nothing to rebase" case while performing
'hg pull --rebase' so the message have been updated. Making clearer than an
update was performed and why. This is beneficial side-effect.
- Rebasing from an active bookmark will behave the same as 'hg merge' from a
bookmark.
checkunknown and checkignored are currently respected for updates and regular
merges, but not for certain kinds of rebases. To be precise, they aren't
respected for rebases when:
(1) we're rebasing while currently on the destination commit, and
(2) an untracked or ignored file F is currently in the working copy, and
(3) the same file F is in a source commit, and
(4) F has different contents in the source commit.
This happens because rebases set force to True when calling merge.update.
Setting force to True makes a lot of sense in general, but it turns out the
force option is overloaded: there's a deprecated '--force' option in merge that
allows you to merge in outstanding changes, including changes in untracked
files. We use the 'mergeforce' parameter to tell those two cases apart.
I think the behavior during rebases when checkunknown is 'abort' (the default)
is wrong -- we should abort on or overwrite differing untracked files, not try
to merge them in. However that currently breaks rebases by aborting in the
middle -- we need better handling for that case before we can change the
default.
The phrase "cannot edit immutable changeset" is kind of tautological.
Of course unchangeable things can't be changed. We instead mention
"public" and provide a hint so that we can point to the actual
problem. Even in cases where some operation other than edition cannot
be performed, "public" gives the root cause that results in the
"immutable" effect.
There is a precedent for saying "public" instead of "immutable", for
example, in `hg commit --amend`.
Previously, a backup bundle could overwrite an existing bundle and cause user
data loss. For instance, if you have A<-B<-C and strip B, it produces backup
bundle B-backup.hg. If you then hg pull -r B B-backup.hg and strip it again, it
overwrites the existing B-backup.hg and C is lost.
The fix is to add a hash of all the nodes inside that bundle to the filename.
Fixed up existing tests and added a new test in test-strip.t
Show status messages while rebasing, similar to what graft do:
rebasing 12:2647734878ef "fork" (tip)
This gives more context for the user when resolving conflicts.
Globbing the hash made it harder to maintain tests with run-tests -i when it
was so far by the generated test output.
The hashes are stable and we just need to add a (glob).
The state mapping also contains some magic negative values (detached
parent, ignored revision). Blindly reading the state thus lead to
unfortunate usage of the negative value as an update destination. We
now filter them out.
We do a minor alteration of the test to catch this.
This patch also enhances "test-rebase-scenario-global.t", because "hg
rebase" hasn't been explicitly tested around editor invocation and
"--edit" option.
In the other hand, this patch doesn't enhance tests in "hg rebase
--collapse" case, because it is already tested in
"test-rebase-collapse.t".
