This previously died in _revdescendants() taking the min() of the first set to
only(), when it was empty. An empty second set already worked. Likewise,
descendants() already handled an empty set.
This patch makes commit message shown in text editor customizable by
template. For example, this can advertise:
- sample commit messages for routine works,
- points to call attention before commit,
- message of the day, and so on
To show commit message correctly even in problematic encoding, this
patch chooses the latter below:
- replace "buildcommittext" with "buildcommittemplate" completely
- invoke "buildcommittemplate" only if '[committemplate] changeset'
is configured explicitly
For example, if multibyte character ending with backslash (0x5c) is
followed by ASCII character 'n' in the customized template, sequence
of backslash and 'n' is treated as line-feed unexpectedly (and
multibyte character is broken, too).
This corruption occurs in 'decode("string-escape")' while parsing
template string.
Add a new internal:tagmerge merge tool which implements an automatic merge
algorithm for mercurial's tag files
The tagmerge algorithm is able to resolve most merge conflicts that
currently would trigger a .hgtags merge conflict. The only case that
it does not (and cannot) handle is that in which two tags point to
different revisions on each merge parent _and_ their corresponding tag
histories have the same rank (i.e. the same length). In all other
cases the merge algorithm will choose the revision belonging to the
parent with the highest ranked tag history. The merged tag history is
the combination of both tag histories (special care is taken to try to
combine common tag histories where possible).
The algorithm also handles cases in which tags have been manually
removed from the .hgtags file and other similar corner cases.
In addition to actually merging the tags from two parents, taking into
account the base, the algorithm also tries to minimize the difference
between the merged tag file and the first parent's tag file (i.e. it
tries to make the merged tag order as as similar as possible to the
first parent's tag file order).
The algorithm works as follows:
1. read the tags from p1, p2 and the base
- when reading the p1 tags, also get the line numbers associated to each
tag node (these will be used to sort the merged tags in a way that
minimizes the diff to p1). Ignore the file numbers when reading p2 and
the base
2. recover the "lost tags" (i.e. those that are found in the base but not on p1
or p2) and add them back to p1 and/or p2
- at this point the only tags that are on p1 but not on p2 are those new
tags that were introduced in p1. Same thing for the tags that are on p2
but not on p2
3. take all tags that are only on p1 or only on p2 (but not on the base)
- Note that these are the tags that were introduced between base and p1 and
between base and p2, possibly on separate clones
4. for each tag found both on p1 and p2 perform the following merge algorithm:
- the tags conflict if their tag "histories" have the same "rank" (i.e.
length) _AND_ the last (current) tag is _NOT_ the same
- for non conflicting tags:
- choose which are the high and the low ranking nodes
- the high ranking list of nodes is the one that is longer.
In case of draw favor p1
- the merged node list is made of 3 parts:
- first the nodes that are common to the beginning of both the
low and the high ranking nodes
- second the non common low ranking nodes
- finally the non common high ranking nodes (with the last one
being the merged tag node)
- note that this is equivalent to putting the whole low ranking node
list first, followed by the non common high ranking nodes
- note that during the merge we keep the "node line numbers", which will
be used when writing the merged tags to the tag file
5. write the merged tags taking into account to their positions in the first
parent (i.e. try to keep the relative ordering of the nodes that come
from p1). This minimizes the diff between the merged and the p1 tag files
This is done by using the following algorithm
- group the nodes for a given tag that must be written next to each other
- A: nodes that come from consecutive lines on p1
- B: nodes that come from p2 (i.e. whose associated line number is None)
and are next to one of the a nodes in A
- each group is associated with a line number coming from p1
- generate a "tag block" for each of the groups
- a tag block is a set of consecutive "node tag" lines belonging to the
same tag and which will be written next to each other on the merged
tags file
- sort the "tag blocks" according to their associated number line
- put blocks whose nodes come all from p2 first
- write the tag blocks in the sorted order
Notes:
- A few tests have been added to test-tag.t. These tests are very specific to
the new internal:tagmerge tool, so perhaps they should be moved to their own
test file.
- The merge algorithm was discussed in a thread on the mercurial mailing list.
In http://markmail.org/message/anqaxldup4tmgyrx a slightly different algorithm
was suggested. In it the p1 and p2 tags would have been interleaved instead of
put one before the other. It would be possible to implement that but my tests
suggest that the merge result would be more confusing and harder to understand.
As extensively detailed by Pierre-Yves[1], simplemerge's minimal
markers can result in hopeless confusion for many common merges. As it
happens, we accidentally inherited this behavior when we borrowed
simplemerge from bzr; it is not the behavior used by RCS's merge(1),
Since merge(1) (and not bzr) is what we aim to emulate when emulating
RCS's merge markers, we simply turn this feature off. This brings us
in line with the behavior of CVS, SVN, and Git as a bonus.
(NB: using conflict markers with Mercurial is discouraged.)
[1] http://markmail.org/message/wj5mh3lc46czlvld
convert glob tessa
Using status information against the target ensures we are catching all
files with modifications that need reverting.
We still need to distinguish fresh modifications for backup purpose.
test-largefile is affected because it reverted a file that needs no content
change.
We had a special case for file not caught by any categories. It was
aimed at files missing in wc and wc's parent but existing in the target
revision. This is now properly handled using status information.
Using status information against the target to make sure we are catching all
files that need to be re-added.
We still need to distinguish fresh removal because they use a different
message.
Tracking clean files is the simplest way to be able to reports files that need
no changes. So we explicitly retrieve them.
This fixes a couple of test outputs where the lack of changes was not reported.
Status can return file as "deleted". This is only a special case
related to working directory state: file is recorded as tracked but no
file exists on disk. This will never be a state obtainable from
manifest comparisons.
"Deleted" files have another working directory status shadowed by the lack of
file. They will -alway- be touched by revert. The "lack of file" can be seen as
a modification. The file will never match the same "content" as in the revert
target. From there we have two options:
1. The file exists in the target and can be seen as "modified".
2. The file does not exist in the target and can be seen as "added".
So now we just dispatch elements from delete into appropriate categories.
The output is slightly changed because of minirst formatting. Previously,
ui.pushbuffer() had no effect because "badalias" message was written to stderr.
"if not unknowncmd" should no longer be needed because there's no call loop.
Before this patch, 'detailed' is used as the default of '[ui]
mergemarkers'. This embeds non-ASCII characters in tags, branches,
bookmarks, author and/or commit descriptions into merged files in the
encoding specified by '--encoding' global option, 'HGENCODING' or
other locale setting environment variables.
But, if files to be merged use another encoding, this behavior breaks
consistency of encoding in merged files.
For example, ISO-2022-JP or EUC-JP are sometimes used as the file
encoding for Japanese characters, because of historical and/or
environmental reasons, even though UTF-8 or Shift-JIS are ordinarily
used as the terminal encoding.
This can't be resolved automatically, because Mercurial doesn't aware
encoding of managed files.
This patch uses 'basic' as the default of '[ui] mergemarkers' to avoid
embedding encoding sensitive characters for safety.
This patch puts '[ui] mergemarkers = detailed' into default hgrc file
for tests, to reduce changes for tests in this patch.
Before this patch, there was no way to pass in all the positional parameters as
separate words down to another command.
(1) $@ (without quotes) would expand to all the parameters separated by a space.
This would work fine for arguments without spaces, but arguments with spaces
in them would be split up by POSIX shells into separate words.
(2) '$@' (in single quotes) would expand to all the parameters within a pair of
single quotes. POSIX shells would then treat the entire list of arguments
as one word.
(3) "$@" (in double quotes) would expand similarly to (2).
With this patch, we expand "$@" (in double quotes) as all positional
parameters, quoted individually with util.shellquote, and separated by spaces.
Under standard field-splitting conditions, POSIX shells will tokenize each
argument into exactly one word.
This is a backwards-incompatible change, but the old behavior was arguably a
bug: Bourne-derived shells have expanded "$@" as a tokenized list of positional
parameters for a very long time. I could find this behavior specified in IEEE
Std 1003.1-2001, and this probably goes back to much further before that.
When a file was marked as removed in the working copy and did not existed in the
target of the revert, we did not issued any message pointing that no change was
needed to the file (implicitly saying that revert had changed the file).
We now properly issue a message in this situation. Tests change in and handful
of case where the message was documented as missing.
We now call status against the target (and possibly against the working
directory parent is different). We do not use the information from the two
sources yet, but this is coming soon.
We need the status information aganst the dirstate in all case because we need
to be able to backup local modification.
As we are going to introduce status again other revision we needs to distinguish
between data from dirstate status and the other one. We prefix the existing data
with "ds" to highlight this.
Currently, revset is using information from dirstate status and alter its
behavior whenever the file exist in the target manifest or not. This tests are
done a big for loop. We move this member ship testing outside of the loop and
simplifies associates data structure.
This is a step toward a cleaner implementation of revert based on status.
Use the introduced caching infrastructure to cache hidden
changesets. We crosscheck if the content of the cache unless
experimental.verifyhiddencache is set to False. This will be removed
in the future. Without crosschecking the caches speed ups hg status and
other commands:
without caching:
$ time hg status
hg status 0.72s user 0.20s system 100% cpu 0.917 total
with caching
$ time hg status
hg status 0.49s user 0.15s system 100% cpu 0.645 total
Add a caching infrastructure to cache hidden changesets. The cache tries to read
the cache lazily and falls back to recomputing if no wlock can be obtain.
To validate the cache we store a sha of the obstore content and repo heads in
the beginning of the cache which we check every request.
Split up _gethiddenblockers into two categories: (1) "static' blockers
that solely rely on the contents of obstore and are visible children of
hidden changsets. (2) "dynamic" blockers, appearing by having wd parents,
bookmarks or tags pointing to hidden changesets.
We assume that (1) doesn't change often and can be easily cached with a good
invalidation strategy. (2) change often, but barely produce blockers, so we
can recompute them if necessary.
We used to have two slightly different message which people wouldn't read...
and then complain that they couldn't find the global options or examples.
So we unify them into one message that's upfront that STUFF IS
INTENTIONALLY HIDDEN and that looks more like our normal hint style.
The phase cache file is no longer written on lock release, it is now handled by
the transaction (as changesets and obsolescence markers are).
(Hooray)
As we stop relying on the lock to write phase, repos with no existing phase
information will need to wait for a phase move or a strip to happen in order to
get the first write in the `phaseroots` file. This explain the change in
test-inherit-mode.t.
This should not have any side effects but in very obscure cases where
people interact with pre-2.1 and post-2.1 versions of Mercurial on the
same repo while having MQ patches applied but the MQ extension
disabled from time to time. A case unlikely enough to not be worth
preserving the old behavior with awful hacks.
In most case, the file creation logic will be handled by the
transaction itself. The write method has to stay around for the case
where the repository is modified outside a transaction (strip).
A new `transaction.addfilegenerator` function is added. It allows external code
to register files to be generated. See inline documentation for details.
It is important to gather all file creation logic on the transaction
as at some point we'll want to mimic the "pre-transaction-commit"
logic that we use for revlog. I'm refering to the logic that lets
hooks see the result of the transaction before it actually gets
committed.
Similar to the previous patch for workingfilectx, this patch will allow
abstracting localrepo.remove / write method to refactor working directory code
but instead operate on files in memory.
We now pass a transaction option to this phase movement function. The
object is currently not used by the function, but it will be in the
future.
All call sites have been updated. Most call sites were already enclosed in a
transaction for a long time. The handful of others have been recently
updated in previous commit.
We now pass a transaction option to this phase movement function. The object
is currently not used by the function, but it will be in the future.
All call sites have been updated. Most call sites were already enclosed in a
transaction for a long time. The handful of others have been recently
updated in previous commit.
The retractboundary function remains to be upgraded.
We were relying on the phase internals to filter out redundant phase
information from remove. However as we plan to integrate phase
movement inside the transaction, we want to avoid useless transaction
creation on no-op pulls.
Therefore we filter out all the information that already matches the current
repository state. This will let us create a transaction only when there is
actual phase movement needed.
cset 21b4faf3787e has removed this option. This commit just tidies the
code that was associated to it. It also fixes the internal calls to
the strip() function.
Before this change, any function that thought it would want as a final
safety to keep a partial backup bundle (bundling changes not linearly
related to the current change being stripped), had to explicitly pass
a backup="strip" option. With this change, these backups are always
kept in case of an exception and always removed if there is no
exception. Only full backups can be specified with backup=True or no
full backups with backup=False.
The following functions in simplemerge are dead code. I reran "make
test-merge*" after this change, and it passed. Looks like cruft that
we've been carrying since we nabbed this code from bzr.
This fixes a discrepency for basectx and classes that inherit from it. Now
callers can pass these arguments to any context without an exception being
raised.
This argument controls the phase used for the added changesets. This can be
useful to unbundle in "secret" phase as required by shelve.
This change aims at helping high-level code get rid of manual phase
movement. An important milestone for having phases part of the transaction.
We do not have infrastructure to include obsolescence markers in the bundle2
push from core. But extensions may so we make sure it would not be sent twice.
Sending obsmarkers through pushkey requires extra encoding (since pushkey can't
take binary content) and slicing (since we can hit http header limit). As we
send all obsolescences markers that exists in the repo for each push, we used to
just look at the content of the "obsolete" pushkey namespace (already encoded
and sliced) and send its
content.
However, future changeset will make it possible to push only parts of the
obsmarkers. To prepare this we now explicitly encode a list of markers. The list
of markers is still "all of them" but future changeset will takes care
of that.
The new code uses a "_protected" method but that seems reasonable to keep it
private as this is the is the only external user of it and this whole pushing
obsmarker through pushkey things in fairly hacky already)
This variant gives access to a feature already present in ``internal:merge``:
displaying merge base content.
In the basic merge (calling ``hg merge``) case, including more context to the
merge markers is an interesting addition.
But this extra information is the only viable option in case conflict from
grafting (, rebase, etc…).
When grafting ``source`` on ``destination``, the parent of ``source`` is
used as the ``base``. When all three changesets add content in the same
location, the marker for ``source`` will contains both ``base`` and ``source``
content. Without the content of base exposed, there is no way for the user
to discriminate content coming from ``base`` and content commit from ``source``.
Practical example (all addition are in the same place):
* ``destination`` adds ``Dest-Content``
* ``base`` adds ``Base-Content``
* ``source`` adds ``Src-Content``
Grafting ``source`` on ``destination`` will produce the following conflict:
<<<<<<< destination
Dest-Content
=======
Base-Content
Src-Content
>>>>>>> source
This that case there is no way to distinct ``base`` from ``source``. As a result
content from ``base`` are likely to slip in the resolution result.
However, adding the base make the situation very clear:
<<<<<<< destination
Dest-Content
||||||| base
Base-Content
======= base
Base-Content
Src-Content
>>>>>>> source
Once the base is added, the addition from the grafted changeset is made clear.
User can compare the content from ``base`` and ``source`` to make an enlightened
decision during merge resolution.
When a third label is provided (to included the base content) it is properly
processed as the two others. Nothing changes if only two labels are provided.
If a third label is provided it will be used for the "base" content:
<<<<<<< local
content
from
local
||||||| base
former
common
=======
other
conflicting
>>>>>>> other
Matt Mackall said:
The goal of simplemerge should have always been to be a drop-in
replacement for RCS merge. Please nuke this minimization thing entirely.
This whole things is now dead.
fade484cb8f6 disabled minimal for `internal:merge` but forgot to also disabled
it for premerge. This is now done.
This gives me an occasion to shamelessly includes my explanation of why this
minimisation feature must disappear:
[this is why it's pointless to reject patches with misspellings in the
description - mpm]
Detailled explanation
=====================
The ``simplemerge`` code use in ``internal:merge`` has a feature called
"minimization". It reprocess conflicting chunks to find common changes
inside them and excludes such common sections from the marker.
This approach seems a significant win at first glance but produces very
confusing results in some other cases.
Simple example
--------------
A simple example is enough to show the benefit of this feature. In this merge,
both sides change all numbers from letters to digits, but one side is also
changing some values.
$ cat << EOF > base
> Small Mathematical Series.
> One
> Two
> Three
> Four
> Five
> Hop we are done.
> EOF
$ cat << EOF > local
> Small Mathematical Series.
> 1
> 2
> 3
> 4
> 5
> Hop we are done.
> EOF
$ cat << EOF > other
> Small Mathematical Series.
> 1
> 2
> 3
> 6
> 8
> Hop we are done.
> EOF
In the minimalists case, the markers focus on the disagreement between the two
sides.
$ $TESTDIR/../contrib/simplemerge --print local base other
Small Mathematical Series.
1
2
3
<<<<<<< local
4
5
=======
6
8
>>>>>>> other
Hop we are done.
warning: conflicts during merge.
[1]
In the non minimalist case, the whole chunk is included in the conflict marker.
Making it harder spot actual differences.
$ $TESTDIR/../contrib/simplemerge --print --no-minimal local base other
Small Mathematical Series.
<<<<<<< local
1
2
3
4
5
=======
1
2
3
6
8
>>>>>>> other
Hop we are done.
warning: conflicts during merge.
[1]
Practical Advantages of minimalisation: merge of grafted change
---------------------------------------------------------------
This feature can be very useful when a change have been grafted in another
branch and then some change have been made to the grafted code.
$ cat << EOF > base
> # empty file
> EOF
$ cat << EOF > local
> def somefunction(one, two):
> some = one
> stuff = two
> are(happening)
> here()
> EOF
$ cat << EOF > other
> def somefunction(one, two):
> some = one
> change = two
> are(happening)
> here()
> EOF
The minimalist case recognises the grafted content as similar and highlight the
actual change.
$ $TESTDIR/../contrib/simplemerge --print local base other
def somefunction(one, two):
some = one
<<<<<<< local
stuff = two
=======
change = two
>>>>>>> other
are(happening)
here()
warning: conflicts during merge.
[1]
Again, the non-minimalist case produces a larger conflict. Making it harder to
spot the actual conflict.
$ $TESTDIR/../contrib/simplemerge --print --no-minimal local base other
<<<<<<< local
def somefunction(one, two):
some = one
stuff = two
are(happening)
here()
=======
def somefunction(one, two):
some = one
change = two
are(happening)
here()
>>>>>>> other
warning: conflicts during merge.
[1]
Practical disadvantage: multiple functions on each side
---------------------------------------------------------------
So, if this "minimalist" help so much, why introduce a setting to disable it?
The issue is that this minimisation will grab any common lines for breaking
chunks. This may result in partial context when solving a merge. The most
simple example is a merge where both side added some (different) functions
separated by blank lines. The "minimalist" approach will recognise the blank
line as "common" and over slice the chunks, turning a simple conflict case into
multiple pairs of conflicting functions.
$ cat << EOF > base
> # empty file
> EOF
$ cat << EOF > local
> def function1():
> bla()
> bla()
> bla()
>
> def function2():
> ble()
> ble()
> ble()
> EOF
$ cat << EOF > other
> def function3():
> bli()
> bli()
> bli()
>
> def function4():
> blo()
> blo()
> blo()
> EOF
The minimal case presents each function as a separated context.
$ $TESTDIR/../contrib/simplemerge --print local base other
<<<<<<< local
def function1():
bla()
bla()
bla()
=======
def function3():
bli()
bli()
bli()
>>>>>>> other
<<<<<<< local
def function2():
ble()
ble()
ble()
=======
def function4():
blo()
blo()
blo()
>>>>>>> other
warning: conflicts during merge.
[1]
The non-minimalist approach produces a simpler version with more context in
each block. Solving such conflicts is usually as simple as dropping the 3 lines
dedicated to markers.
$ $TESTDIR/../contrib/simplemerge --prin --no-minimal local base other
<<<<<<< local
def function1():
bla()
bla()
bla()
def function2():
ble()
ble()
ble()
=======
def function3():
bli()
bli()
bli()
def function4():
blo()
blo()
blo()
>>>>>>> other
warning: conflicts during merge.
[1]
Practical disaster: programing language have a lot of common line
=================================================================
If only blank lines between function where the only frequent content of a code
file. But programming language tend to repeat them self much more often. In that
case, the minimalist approach turns a simple conflict into a massive mess.
Consider this example where two unrelated functions are added on each side.
Those function shares common programming constructs by chance.
$ cat << EOF > base
> # empty file
> EOF
$ cat << EOF > local
> def longfunction():
> if bla:
> foo
> else:
> bar
> try:
> ret = some stuff
> except Exception:
> ret = None
> if ret is not None:
> return ret
> return 0
>
> def shortfunction(foo):
> goo()
> ret = foo + 5
> return ret
> EOF
$ cat << EOF > other
> def otherlongfunction():
> for x in xxx:
> if coin:
> break
> tutu
> else:
> bar()
> baz()
> ret = week()
> try:
> groumpf = tutu
> fool()
> except Exception:
> zoo()
> pool()
> if cond:
> return ret
>
> # some big block
> ret ** 6
> koin()
> return ret
> EOF
The minimalist approach will hash the whole conflict into small chunks that
does not match any meaningful semantic and are impossible to solve.
$ $TESTDIR/../contrib/simplemerge --print local base other
<<<<<<< local
def longfunction():
if bla:
foo
=======
def otherlongfunction():
for x in xxx:
if coin:
break
tutu
>>>>>>> other
else:
<<<<<<< local
bar
=======
bar()
baz()
ret = week()
>>>>>>> other
try:
<<<<<<< local
ret = some stuff
=======
groumpf = tutu
fool()
>>>>>>> other
except Exception:
<<<<<<< local
ret = None
if ret is not None:
=======
zoo()
pool()
if cond:
>>>>>>> other
return ret
<<<<<<< local
return 0
=======
>>>>>>> other
<<<<<<< local
def shortfunction(foo):
goo()
ret = foo + 5
=======
# some big block
ret ** 6
koin()
>>>>>>> other
return ret
warning: conflicts during merge.
[1]
The non minimalist approach will properly produce a single set of conflict
markers. Highlighting that the two chunk are unrelated. Such conflict from
unrelated content added at the same place is usually solved by dropping the
marker an keeping both content. Something impossible with minimised markers.
$ $TESTDIR/../contrib/simplemerge --prin --no-minimal local base other
<<<<<<< local
def longfunction():
if bla:
foo
else:
bar
try:
ret = some stuff
except Exception:
ret = None
if ret is not None:
return ret
return 0
def shortfunction(foo):
goo()
ret = foo + 5
return ret
=======
def otherlongfunction():
for x in xxx:
if coin:
break
tutu
else:
bar()
baz()
ret = week()
try:
groumpf = tutu
fool()
except Exception:
zoo()
pool()
if cond:
return ret
# some big block
ret ** 6
koin()
return ret
>>>>>>> other
warning: conflicts during merge.
[1]
Phase push is now included in the same bundle2 push as changesets. We use
multiple pushkey parts to transmit the information. Note that phase moves are
still not part of the repository "transaction".
Instead of a single list of functions, we now have a list of names and
a mapping of names to functions. This simplifies wrapping of steps
from extensions. In the same move, declaration becomes decorator-based
(syntax sugar, nom nom nom!).
Now that both options (push succeed or fall back) live in pushop, we
can move the common heads computation there too. It is a very commonly
accessed attribute so it makes a lot of sense to have it in pushop.
Bundle2 will allow pushing all different parts of the push in a single bundle.
This mean that the discovery for each part needs to be done before trying to
push. Currently we may have different behaviors for phases and obsolescence markers
when the push of changesets fails. For example, information may still be
exchanged for a part of the history where changesets are common but where
phases mismatch. So the preparation of the push need to determine what
information need to be pushed in both situations. And it needs a different set of
heads for this. Therefore we are moving heads computation within pushop for easy
access by all parties. We start with the simplest set of heads.
Before this patch, each template definitions for 'changeset*' in
'[committemplate]' section have to be written fully from scratch,
even though many parts of them may be common.
This patch uses '[committemplate]' section like as the map file for
the style definition. All items other than 'changeset' can be referred
from others.
This can reduce total cost of template customization in
'[committemplate]' section.
When the commit template other than '[committemplate] changeset'
is chosen by 'editform', putting '[committemplate] changeset'
value into the cache of the templater causes unexpected result,
because the templater stores the specified (= chosen) template
definition into own cache as 'changeset' at construction time.
This is the reason why '[committemplate] changeset' can't be referred
from others.
Before this patch, '[committemplate] changeset' definition is shared
between all actions invoking 'commitforceeditor()'.
This prevents template definition from showing action specific
messages: for example, 'hg tag --remove' may need specific
message to call attention, but showing it may be redundant for
other actions.
This patch looks commit template definition up by specified
'editform' introduced by prior patches. 'editform' are
dot-separated list of names, and treated as hierarchical one.
This patch passes 'editform' argument according to the format below:
COMMAND[.ROUTE]
- ROUTE: name of route, if there are two or more routes in COMMAND
In this patch, 'normal' and 'bypass' are used as ROUTE.
This patch passes 'editform' argument according to the format below:
COMMAND[.ROUTE]
- ROUTE: name of route, if there are two or more routes in COMMAND
In this patch, 'normal' and 'amend' are used as ROUTE.
This patch passes 'editform' argument according to the format below:
COMMAND[.ROUTE]
- ROUTE: name of route, if there are two or more routes in COMMAND
In this patch, 'add' and 'remove' are used as ROUTE
This patch passes 'editform' argument according to the format below:
COMMAND[.ROUTE]
- ROUTE: name of route, if there are two or more routes in COMMAND
In this patch, ROUTE is omitted.
This patch passes 'editform' argument according to the format below:
COMMAND[.ROUTE]
- ROUTE: name of route, if there are two or more routes in COMMAND
In this patch, ROUTE is omitted..
This information will be used to switch '[committemplate] changeset'
definition according to its purpose in the subsequent patch.
This information also makes it easier to hook commit text editing only
in the specific cases.
It's not uncommon for a user to want to run log with a pattern or directory name
on the history of their current commit. Currently we prevent that, but
I can't think of any reason to continue blocking that.
This commit removes the restriction and allows 'hg log -f <dir/pat>'
The ``getbundle`` function was initially design to return a changegroup bundle.
However, bundle2 allows transmitting a wide range of data. Some bundle2
requests may not include a changegroup at all.
Before this changeset, the client would request a changegroup for
``heads=[nullid]`` and receive an empty changegroup.
We introduce an official boolean parameter, ``cg``, that can be set
to false to disable changegroup generation on getbundle. A new bundle2
capability is introduced to let the client know.
On Windows, it isn't common to set LANG environment variable. This patch makes
gettext honor Windows-style UI language [1] if no locale variables are set.
Because of this change, LANG=C or HGPLAIN must be set in order to disable
translation on non-English Windows.
[1]: http://msdn.microsoft.com/en-us/library/dd374098(v=VS.85).aspx
For non-working contexts, walk and matches do the same thing. For working
contexts, walk stats all the files and looks for unknown files, while matches
just filters the dirstate by match.
Current callers that require just this data call workingctx.walk, which calls
dirstate.walk, which stats all the files. Even worse, workingctx.walk looks for
unknown files, significantly slowing things down, even though callers might not
be interested in them at all.
Since --force determines the list of revisions to be grafted, it doesn't really
make sense for users to have to keep typing --force --continue as they continue
grafting.
For a pathological .hgignore with over 2500 glob lines and over 200000 calls to
re.escape, and with re2 available, this speeds up parsing the .hgignore from
0.75 seconds to 0.20 seconds. This causes e.g. 'hg status' with hgwatchman
enabled to go from 1.02 seconds to 0.47 seconds.
The escape method in at least one of the modules called 're2' is in C. This
means it is significantly faster than the Python code written in 're'.
An upcoming patch will have benchmarks.
Instead of explicitly calling a few function to generate part in the bundle, we
now have a list of all part generators. This should make it easier for
extensions to adds new part in the bundle.
This new way to extend the push deprecates the old `_pushbundle2extraparts` way.
When bundle2 push includes more than just changesets, we may have no
changegroup to push yet still have other data to push.
So we now try to performs a bundle2 push in all cases. The check for changegroup
inclusion is moved into the ``_pushb2ctx`` function in charge of creating the
changegroup part.
The bundle2 part is aborted if no actual payload part have been added to the
bundle2.
This attribute will record what steps were performed during the bundle2 push.
This will control whenever the old way push must be performed or skipped. This
will ultimately be used by changegroup, phases, obsmarkers, bookmarks and any
other kind of data ones may want to exchange even when bundle2 support is
missing.
This property can be used to know how much parts have been added to the bundle2.
This will be useful to check if any part have been generated for a push.
We extract the creation of changegroup related parts into its own function.
This precludes the inclusion of more diverse data during the bundle2 push.
We use a closure to carry the logic that need to be perform when processing the
server reply.
This is the first step of a refactoring that will ease the inclusion of new part
in the bundle2 push and includes more information (like phases) in this push
We need to move the function a bit sooner to be able to group the generation of
`b2x:check:heads` and `b2x:changegroup` part in an external function. We move it
sooner to preserve parts creation order bundle2 tests rely on. At the ends of this
refactoring the `_pushbundle2extraparts` will be replaced by another mechanism
anyway.
'subrepos' template keyword newly added by this patch shows updated
subrepositories.
For the compatibility with the list of subrepositories shown in the
editor at commit:
- 'subrepos' is empty, at revisions removing '.hgsub' itself
- 'subrepos' is calculated between the revision and the first parent
of it, at merge revisions
To avoid silent regression, this patch also confirms "hg diff" of
".hgsubstate" and parents for each target revisions in the test.
Before this patch, complicated template expression below is required
to show current active bookmark if it is associated with the
changeset.
"{bookmarks % '{ifeq(bookmark, current, \"{bookmark}\")}'}"
This patch add 'currentbookmark' keyword to show current bookmark
easily.
On a repository with over 250,000 files and 700,000 commits, this improves
cases like
hg status --rev <rev> -- <file> # rev is not .
from 2.1 seconds to 1.4 seconds.
There is further scope for improvement here: for a single file or a small set
of files, it is probably more efficient to use filelog linkrevs when possible.
However there will always be cases where that will fail (multiple commits
pointing to the same file revision, removed files...), so this is independently
useful.
The existing _readtags function has been modified a little and renamed
_readtaghist. A new _readtaghist function has been added, which is a wrappger
around _readtaghist. Its output is the same as the old _readtaghist.
The purpose of this change is to make it possible to automatically merge tag
files. In order to do so we will need to get the line numbers for each of the
tag-node pairs on the first merge parent.
This is not used yet, but will be used on a follow up patch that will introduce
an automatic tag merge algorithm.
I performed some tests to compare the effect of this change. I used timeit to
run the test-tags.t test a 9 times with and without this patch. The results
were:
- without this patch: 3 loops, best of 3: 8.55 sec per loop
- with this patch: 3 loops, best of 3: 8.49 sec per loop
The the test was on average was slightly faster with this patch (although the
difference was probably not statistically significant).
Before this patch, "close()" for the file object opened in
"_initrepo()" may not be executed, if unexpected exception is raised,
because it isn't executed in "finally" clause.
This patch ensures "close()" execution at the end of "_initrepo()" by
moving it into "finally" clause.
This patch puts configuration lines into "lines" array and write them
out at once, to narrow the scope of "try"/"finally" for review-ability.
This patch doesn't use "vfs.write()", because:
- current "vfs.write()" implementation doesn't take "mode" argument
to open file in "text" mode
- writing hgrc file out in binary mode may break backward compatibility
Before this patch, "close()" for the file object opened in
"_cachestorehash()" may not be executed, if unexpected exception is
raised, because it isn't executed in "finally" clause.
This patch ensures "close()" execution at the end of
"_cachestorehash()" by moving it into "finally" clause.
Before this patch, "close()" for the file object opened in
"_readstorehashcache()" may not be executed, if unexpected exception
is raised, because it isn't executed in "finally" clause.
This patch ensures "close()" execution at the end of
"_readstorehashcache()" by moving it into "finally" clause.
Before this patch, "close()" for the file object opened in
"_calcfilehash()" may not be executed, if unexpected exception is
raised, because it isn't executed in "finally" clause.
This patch ensures "close()" execution at the end of "_calcfilehash()"
by moving it into "finally" clause.
Before this patch, "lock.release()" for "self._repo" in
"_cachestorehash()" of "hgsubrepo" may not be executed, if unexpected
exception is raised, because it isn't executed in "finally" clause.
This patch ensures "lock.release()" execution at the end of
"_cachestorehash()" by moving it into "finally" clause.
Before this patch, "lock.release()" for "self._repo" in "storeclean()"
of "hgsubrepo" may not be executed, if unexpected exception is raised,
because it isn't executed in "finally" clause.
This patch ensures "lock.release()" execution at the end of
"storeclean()" by moving it into "finally" clause.
This patch chooses moving almost all lines in "storeclean()" into
"_storeclean()" instead of indenting them for "try/finally" clauses,
to keep diff simple for review-ability.
When the matcher is exact, there's no reason to iterate over the entire
manifest. It's much more efficient to iterate over the list of files instead.
For a repository with approximately 300,000 files, this speeds up
hg log -l10 --patch --follow for a frequently modified file from 16.5 seconds
to 10.5 seconds.
The arguments to log --patch --follow are expected to be exact paths.
This will be used to make manifest filtering for these cases more efficient in
upcoming patches.
Previously, the 'patch' code for hg log --patch --follow would try to resolve
patterns relative to the repository root rather than the current working
directory. Fix that by using match.files instead of pats, as done elsewhere
nearby.
This separation makes it easier to extend/hook building commit text
from the specified context.
This patch uses 'committext' instead of 'edittext' for names of newly
added variable and function, because the former is more purpose
specific than the latter, even though 'edittext' in 'buildcommittext'
is left as it is to reduce amount of diff.
Before this patch, filemerge slices byte sequence directly to trim
conflict markers, but this may cause:
- splitting at intermediate multi-byte sequence
- incorrect calculation of column width (length of byte sequence is
different from columns in display in many cases)
This patch uses 'util.ellipsis' to trim custom conflict markers
correctly, even if multi-byte characters are used in them.
Before this patch, with careless configuration (missing '|firstline'
filtering for '{desc}' keyword, for example), '[ui]
mergemarkertemplate' can make conflict markers multiple lines.
For ordinary users, advantage of allowing '[ui] mergemarkertemplate'
to generate multiple lines for customizing seems to be less than
advantage of disallowing it for safety.
This patch uses only the first line of the conflict marker generated
from '[ui] mergemarkertemplate' configuration for safety.
Before this patch, 'util.ellipsis' tried to avoid splitting at
intermediate multi-byte sequence, but its implementation was incorrect.
Internal function '_ellipsis' trims specified unicode sequence not at
most maxlength 'columns in display', but at most maxlength number of
'unicode characters'.
def _ellipsis(text, maxlength):
if len(text) <= maxlength:
return text, False
else:
return "%s..." % (text[:maxlength - 3]), True
In many encodings, number of unicode characters can be different from
columns in display.
This patch replaces 'ellipsis' implementation by 'encoding.trim',
which can trim string at most maxlength columns in display correctly,
even though specified string contains multi-byte characters.
'_ellipsis' is removed in this patch, because it is referred only from
'ellipsis'.
Newly added 'trim' is used to trim multi-byte characters at most
specified columns correctly: directly slicing byte sequence should be
replaced with 'encoding.trim', because the former may split at
intermediate multi-byte sequence.
Slicing unicode sequence ('uslice') and concatenation with ellipsis
('concat') are defined as function, to make enhancement in subsequent
patch easier.
Prior to this, doing "hg rebase -s @foo -d @" would delete @, which is
obviously wrong: a primary bookmark should never be automatically deleted.
This change blocks the deletion, but doesn't yet properly clean up the
divergence: @ should replace @foo.
