Summary:
D13853115 adds `edenscm/` to `sys.path` and code still uses `import mercurial`.
That has nasty problems if both `import mercurial` and
`import edenscm.mercurial` are used, because Python would think `mercurial.foo`
and `edenscm.mercurial.foo` are different modules so code like
`try: ... except mercurial.error.Foo: ...`, or `isinstance(x, mercurial.foo.Bar)`
would fail to handle the `edenscm.mercurial` version. There are also some
module-level states (ex. `extensions._extensions`) that would cause trouble if
they have multiple versions in a single process.
Change imports to use the `edenscm` so ideally the `mercurial` is no longer
imported at all. Add checks in extensions.py to catch unexpected extensions
importing modules from the old (wrong) locations when running tests.
Reviewed By: phillco
Differential Revision: D13868981
fbshipit-source-id: f4e2513766957fd81d85407994f7521a08e4de48
Summary:
We want to allow blocking full repo streaming clones in certain
repositories (since they can take the lock and take a very long time) unless the
client has explicitly asked for it. The existing stream_out wire protocol has no
way of passing an option, so let's create a new endpoint.
Reviewed By: quark-zju
Differential Revision: D7763717
fbshipit-source-id: eace47143f8fdcc4c6e302b5c26678ccf56ca5d4
Summary:
When running with a Python runtime with a slightly different zlib module,
some `zlib.compress` outputs are different. Some tests are testing the
length, or the content of `zlib.compress` output, directly or indirectly.
That's causing issues.
This patch adds a `common-zlib` hghave test so it can be used to gate tests
checking zlib output. Some lengths are also changed to glob patterns to be
compatible.
Reviewed By: ryanmce
Differential Revision: D6937735
fbshipit-source-id: 2328a39d7f2022f16d51f61b6178568b26dfe2fb
Summary:
This is similar to what D6925398 does. But covers areas that D6925398 missed
because the codemod script wasn't able to handle multiple-line `hg serve`
commands.
Reviewed By: DurhamG
Differential Revision: D6937919
fbshipit-source-id: a67de178527c11a0ed8bbac82f0c46d44b81be77
Summary:
Previously `hg server` uses `HGPORT` that might be in use. This patch uses
`-p 0 --port-file ...` so `hg server` always gets assigned a free port.
The change was first made by the following Ruby script:
```
re = /^ \$ hg serve(.*) -p \$(HGPORT[12]?) (.*[^\\])$\n \$/
Dir['*.t'].each do |path|
old = File.read(path)
new = old.lines.map do |l|
next l if l[/\(glob\)/] or not l['$HGPORT'] or l[/^ [$>]/]
"#{l.chomp} (glob)\n"
end.join.gsub re, <<-'EOS'.chomp
$ hg serve\1 -p 0 --port-file $TESTTMP/.port \3
$ \2=`cat $TESTTMP/.port`
$
EOS
File.write(path, new) if old != new
end
```
Then there are some manual changes:
run-tests.py: It now treats `$HGPORT` in output as glob pattern `*`, since
it does not know the assigned value in tests.
test-bookmarks-pushpull.t, test-https.t: Some `hg pull`s were changed to use
explicit paths instead of relying on `.hgrc` since the test restarts the
server and `.hg/hgrc` having an outdated URL.
test-schemes.t: The test writes `$HGPORT` to `.hgrc` before assigning it.
Changed the order so the correct `$HGPORT` is written.
test-patchbomb-tls.t: Changed `(?) (glob)` to `(glob) (?)`.
Reviewed By: DurhamG
Differential Revision: D6925398
fbshipit-source-id: d5c10476f43ce23f9e99618807580cf8ba92595c
This makes pull consistent with the part used by push and provide us with a
more compact representation of bookmarks.
In addition, this opens the way for smarter bookmark exchanges (e.g. filtering
by names or only sending the bookmark relevant to the pulled set, etc).
Upon pull or unbundle, we display a message with the range of new revisions
fetched. This revision range could readily be used after a pull to look out
what's new with 'hg log'. The algorithm takes care of filtering "obsolete"
revisions that might be present in transaction's "changes" but should not be
displayed to the end user.
chg only supports 'hg serve' when the options to the serve command
follow the 'hg serve'. For example, 'hg -R <repo> serve ..' is unsupported.
This leads to issues with chg running for the following tests:
- test-bundle2-exchange.t
- test-clone-uncompressed.t
- test-hgweb-csp.t
- test-http-bad-server.t
- test-http-bundle1.t
- test-http-protocol.t
- test-http.t
There was an effort made earlier to fix this issue for chg and the tests were
fixed to confirm to the compatible pattern. But the new tests did not take care
of the same and hence, fail. Hopefully, there will be continuous build setup
for chg after all tests are made compatible with chg so that we can avoid such
issues.
Test Plan:
Ran the aforementioned tests with and without '--chg' option.
Differential Revision: https://phab.mercurial-scm.org/D946
--uncompressed isn't a very good name and its description in the
help documentation isn't very useful. We refer to this concept as
"stream clones" in a number of places. I think it makes sense to
change the user-facing argument to use the mode --stream. So this
commit does that.
We keep --uncompressed around for backwards compatibility.
While we're here, we overhaul the help docs for streaming clones
to be somewhat useful.
All tests have been updated to reflect the new preferred --stream
argument. A test for backwards compatibility of --uncompressed has
been added.
.. bc::
`hg clone --stream` should now be used instead of --uncompressed.
--uncompressed is marked as deprecated and is an alias for --stream.
There is no schedule for elimination of --uncompressed.
Differential Revision: https://phab.mercurial-scm.org/D864
A new bundle2 capability 'phases' has been added. If 'heads' is part of the
supported value for 'phases', the server supports reading and sending 'phase-
heads' bundle2 part.
Server is now able to process a 'phases' boolean parameter to 'getbundle'. If
'True', a 'phase-heads' bundle2 part will be included in the bundle with phase
information relevant to the whole pulled set. If this method is available the
phases listkey namespace will no longer be listed.
Beside the more efficient encoding of the data, this new method will greatly
improve the phase exchange efficiency for repositories with non-served
changesets (obsolete, secret) since we'll no longer send data about the
filtered heads.
Add a new 'devel.legacy.exchange' config item to allow fallback to the old
'listkey in bundle2' method.
Reminder: the pulled set is not just the changesets bundled by the pull. It
also contains changeset selected by the "pull specification" on the client
side (eg: everything for bare pull). One of the reason why the 'pulled set' is
important is to make sure we can move -common- nodes to public.
For large enough repositories, pull-based clones take too long, and an attempt
to use them indicates some sort of configuration or other issue or maybe an
outdated Mercurial. Add a config option to disable them.
This helps both users and the people who support them figure out why
a stream clone couldn't be performed.
In an upcoming patch we're going to add a way for servers to hard
abort on a full getbundle. In those cases servers might expect
clients to perform a stream clone, so it's important to communicate
why one couldn't be done.
Mercurial can't currently send cookies as part of HTTP requests.
Some authentication systems use cookies. So, it seems like adding
support for sending cookies seems like a useful feature.
This patch implements support for reading cookies from a file
and automatically sending them as part of the request. We rely
on the "cookiejar" Python module to do the heavy lifting of
parsing cookies files. We currently only support the Mozilla
(really Netscape-era) cookie format. There is another format
supported by cookielib and we may want to consider using that,
especially since the Netscape cookie parser can't parse ports.
It wasn't immediately obvious to me what the format of the other
parser is, so I didn't know how to test it. I /think/ it might
be literal "Cookie" header values, but I'm not sure. If it is
more robust than the Netscape format, we may want to just
support it.
The http test simply wasn't updated in d264983c27fa for Windows. It looks like
the https test meant to glob away the error message in fa7f5826debe, but forgot
the '*', and was subsequently removed in 01af1e5e4062.
The python hooks have access to the hook type information. There is not reason
for external hook to not be aware of it too.
For the record my use case is to make sure a hook script is configured for the
right type.
Hooks related to the transaction are aware of the transaction id. By definition
this txn-id is unique and different for each transaction. As a result it can
never be predicted in test and always needs matching. As a result, touching any
like with this data is annoying. We solve the problem once and for all by
installing an automatic replacement. In test, this will now show as:
TXNID=TXN:$ID$
Previously, "hg serve" will listen on "", which is not clear which interface
it will actually listen on - it could listen on all interfaces (ex. 0.0.0.0
on IPv4).
The run-tests.py script only checks "localhost" for available ports. So
let's make it the same for "hg serve" by explicitly setting "web.address" to
"localhost".
This resolves some IPv6 EADDRINUSE errors.
Previously Abort raised during 'getbundle' call poorly reported (HTTP-500 for
http, some scary messages for ssh). Abort error have been properly reported for
"push" for a long time, there is not reason to be different for 'getbundle'. We
properly catch such error and report them back the best way available. For
bundle, we issue a valid bundle2 reply (as expected by the client) with an
'error:abort' part. With bundle1 we do as best as we can depending of http or
ssh.
Now that servers expose a capability indicating they support
application/mercurial-0.2 and compression, clients can key off
this to say they support responses that are compressed with
various compression formats.
After this commit, the HTTP wire protocol client now sends an
"X-HgProto-<N>" request header indicating its support for
"application/mercurial-0.2" media type and various compression
formats.
This commit also implements support for handling
"application/mercurial-0.2" responses. It simply reads the header
compression engine identifier then routes the remainder of the
response to the appropriate decompressor.
There were some test changes, but only to logging. That points to
an obvious gap in our test coverage. This will be addressed in a
subsequent commit once server support is in place (it is hard to
test without server support).
On Windows platform, invoking printenv.py directly via hook is
problematic, because:
- unless binding between *.py suffix and python runtime, application
selector dialog is displayed, and running test is blocked at each
printenv.py invocations
- it isn't safe to assume binding between *.py suffix and python
runtime, because application binding is easily broken
For example, installing IDE (VisualStudio with Python Tools, or
so) often requires binding between source files and IDE itself.
This patch invokes printenv.py via sh -c for test portability. This is
a kind of follow up for 9e4331825bea, which eliminated explicit
"python" for printenv.py. There are already other 'sh -c "printenv.py"'
in *.t files, and this fix should be reasonable.
This changes were confirmed in cases below:
- without any application binding for *.py suffix
- with binding between *.py suffix and VisualStudio
This patch also replaces "echo + redirection" style with "heredoc"
style, because:
- hook command line is parsed by cmd.exe as shell at first, and
- single quotation can't quote arguments on cmd.exe, therefore,
- "printenv.py foobar" should be quoted by double quotation, but
- nested quoting (or tricky escaping) isn't readable
Some systems (like FreeBSD jails) use something other than 127.0.0.1
for localhost, and it's not safe to assume it'll always be the same
width. Using sed with a replacement like this sidesteps the problem.
getbundle was requesting the "phase" namespace instead of the "phases"
namespace, which led to the client still requesting the phases
separately after getbundle finished.
chg currently does not support hg serve -d. It has a quick path testing if the
command is hg serve -d and fallbacks to hg if so. But the test only works if
"serve" is the first argument since the test wants to avoid false positives
(for example, "-r serve" is different).
This patch reorders "hg server" commands in tests, making them chg friendly.
In order to give us the freedom to change the changegroup3 format,
let's hide it behind an experimental config. Since it is required by
treemanifests, that will override the cg3 config.
Sometimes a txnclose or changegroup hook wants to iterate through all
the changesets in transaction: in that situation usually the revset
`$HG_NODE:` is used to select the revisions. Unfortunately this revset
sometimes may contain too many changesets because we don't have the
write lock while the hook runs newer changes may be added to
repository in the meantime.
That's why there is a need for extra variable carrying the information about
the last change in the transaction.
I'm not entirely happy with using a trailing / on a "file" entry for
transferring a treemanifest. We've discussed putting some flags on
each file header[0], but I'm unconvinced that's actually any better:
if we were going to add another feature to the cg format we'd still be
doing a version bump anyway to cg4, so I'm inclined to not spend time
coming up with a more sophisticated format until we actually know what
the next feature we want to stuff in a changegroup will be.
Test changes outside test-treemanifest.t are only due to the new CG3
bundlecap showing up in the wire protocol.
Many thanks to adgar@google.com and martinvonz@google.com for helping
me with various odd corners of the changegroup and treemanifest API.
0: It's not hard refactoring, nor is it a lot of work. I'm just
disinclined to do speculative work when it's not clear what the
customer would actually be.
.hgtags fnodes cache entries can be expensive to compute, especially
if there are hundreds of even thousands of them. This patch implements
support for receiving a bundle2 part that contains a mapping of
changeset to .hgtags fnodes.
An upcoming patch will teach the server to send this part, allowing
clients to bypass having to redundantly compute these values.
A number of tests changed due to the client advertising the "hgtagsfnodes"
capability.
Now that we have a bundle1 version of this test, we can move the
original to bundle2. This lets us handle the ouput change from using
the bundle2 protocol earlier.
Without this patch, if the server sets preferuncompressed, there's no way for
clients to override that and force a non-streaming clone. With this patch, we
extend the meaning of --pull to also override preferuncompressed and force a
non-streaming clone.
8a92e6790099 broke bookmarks getting copied during uncompressed clones. Since
most of the pull logic has been moved into exchange.py, lets just call
exchange.pull to fix up the repo with the latest bits after the streaming clone
has bootstrapped the repo. This keeps us from having to duplicate the bookmark
logic.
addchangegroup creates a runhook function that is used to invoke the
changegroup and incoming hooks, but at the time the function is called,
the contents of hookargs associated with the transaction may have been
modified externally. For instance, bundle2 code affects it with
obsolescence markers and bookmarks info.
It also creates problems when a single transaction is used with multiple
changegroups added (as per an upcoming change), whereby the contents
of hookargs are that of after adding a latter changegroup when invoking
the hook for the first changegroup.
The discovery of necessary bookmark updates is now done within the "discovery
phase". This opens the door to the inclusion of bookmarks in a unified bundle2
push.
When a changegroup is added by a push on a publishing server, we ensure they
are added as public. This is used to enforce publishing on server when the
client is not aware of phases. It also prevents race conditions where a reader
could see the changesets as draft before they get turned public by the client.
Finally, this save rounds trip as the client does not need additional request to
turn them public.
However, this logic was only enforced when the changegroup was from a "push"
source. And "push" is used for local pushes only. Wireprotocol push uses "serve"
as source since Mercurial 1.9. We now enforce this logic for both "push" and
"serve" sources.
One could note that this logic was mainly useful during wireprotocol exchanges.
So this code is finally put into good use, 9 versions after its introduction.