We have fixed a bug where two progress instance were created and competed with
each other (in 29d8a6f6d7e4). But we did not updated the non-hardlink section of
'test-subrepo-recursion.t'. This patch fixes it.
The ui object can take care of its progress object logic by itself.
test-subrepo-recursion is modified because it is a bit sensitive to the "no
progress bar" default. It will become unnecessary in the next step when
progress will be on by default in core.
We were wrapping the ui class again and again (uisetup, reposetup,
subrepo setup, remote repo setup, etc). We now avoid that. This has
impact on tests that were double-printing data because of this.
Unix utilities like tar will happily prefix the files it packs with './', but
annoyingly, Windows Explorer will not show these packed files when it opens the
archive. Since there doesn't seem to be a point in including './' in the path
names, just drop it. The default 'hg archive' prefix is the basename of the
archive, so specifying '.' allows for that default to be disabled completely.
The previous behavior when archiving a subrepo 's' on Windows was to internally
name the file under it 's\file', due to the use of vfs.reljoin(). When printing
the file list from the archive on Windows or Linux, the file was named
's\\file'. The archive extracted OK on Windows, but if the archive was brought
to a Linux system, it created a file named 's\file' instead of a directory 's'
containing 'file'.
*.zip format achives seemed not to have the problem, but this was definitely an
issue with *.tgz archives.
Largefiles actually got this right, but a test is added to keep this from
regressing. The subrepo-deep-nested-change.t test was repurposed to archive to
a file, since there are several subsequent tests that archive to a directory.
The output change is losing the filesystem prefix '../archive_lf' and not
listing the directories 'sub1' and 'sub1/sub2'.
This patch newly adds "dirtyreason()" to centralize composing dirty
reason message like "uncommitted changes in subrepository 'xxxx'".
There are 3 similar messages below, and this patch is a part of
preparations for unifying them into (1), too.
1. uncommitted changes in subrepository 'XXXX'
2. uncommitted changes in subrepository XXXX
3. uncommitted changes in subrepo XXXX
This patch chooses adding new method "dirtyreason()" instead of making
"dirty()" return "reason string", because:
- some of existing "dirty()" implementation is too complicated to do
so simply, and
- ill-mannered 3rd party subrepo classes, of which "dirty()" doesn't
return "reason string", cause meaningless message (even though it
is rare case)
Reverting to a revision where the subrepo didn't exist will now abort, and
matching subrepos against the working directory is consistent with how filesets
are evaluated since dd1c701aad4d.
This effectively reverts 9fc565fa1621, which caused some normal file copies to
not be displayed as copies. Other normal file copies could be displayed- the
exact reason isn't clear. This also adds two tests that were failing prior to
this backout, so that this can be sorted out next cycle.
The difference between copy cases that worked and those that didn't seemed to be
in copies.pathcopies(). When largefiles isn't enabled for the changed test, or
lfstatus is not set in the commands.status() override, 'y.ancestor(x) == x'.
That wasn't true otherwise, which fell through to the _chain() method. In this
case, the copy is removed in the criss cross loop.
'y.ancestor(x)' returns a context.changectx type, while 'x' is a lfilesctx type
in the failing case. I tried adding the ancestor method to the lfilesctx class
to change the type of the ancestor context, however the context when printed as
a string then gains a '+'. This points to it being a context.committablectx,
which clearly isn't correct for an ancestor. Possibly the problem is the
lfilesctx needs to subclass context.committablectx in some cases, but
context.changectx in others, within the same invocation? I'm not sure how to
pull that off, and backing out this change is safer during the freeze.
As to the status changing when a path is specified, I haven't looked into it
yet.
This change appends the subrepo path to subrepo errors. That is, when there
is an error performing an operation a subrepo, rather than displaying a message
such as:
pushing subrepo MYSUBREPO to PATH
searching for changes
abort: push creates new remote head HEADHASH!
hint: did you forget to merge? use push -f to force
mercurial will show:
pushing subrepo MYSUBREPO to PATH
searching for changes
abort: push creates new remote head HEADHASH! (in subrepo MYSUBREPO)
hint: did you forget to merge? use push -f to force
The rationale for this change is that the current error messages make it hard
for TortoiseHg (and similar tools) to tell the user which subrepo caused the
push failure.
The "(in subrepo MYSUBREPO)" message has been added to those subrepo methods
were it made sense (by using a decorator). We avoid appending "(in subrepo XXX)"
multiple times when subrepos are nexted by throwing a "SubrepoAbort" exception
after the extra message is appended. The decorator will then "ignore" (i.e. just
re-raise) the exception and never add the message again.
A small drawback of this method is that part of the exception trace is lost when
the exception is catched and re-raised by the annotatesubrepoerror decorator.
Also, because the state() function already printed the subrepo path when it
threw an error, that error has been changed to avoid duplicating the subrepo
path in the error message.
Note that I have also updated several subrepo related tests to reflect these
changes.
Many tests didn't change back from subdirectories at the end of the tests ...
and they don't have to. The missing 'cd ..' could always be added when another
test case is added to the test file.
This change do that tests (99.5%) consistently end up in $TESTDIR where they
started, thus making it simpler to extend them or move them around.
in 'cmdutil.forget()':
for f in match.files():
if match.exact(f) or not explicitonly:
....
is equal to:
for f in match.files():
if True:
....
because 'f' from 'match.files()' should 'match.exact(f)':
- 'match.files()' returns 'self._files'
- 'match.exact(f)' examines 'f in self._fmap',
- 'self._fmap' of match is 'set(self._files)'
then, 'explicitonly' wants to suppress warning messges, if it is true
(= 'cmdutil.forget()' is invoked from 'subrepo.forget()').
so, current code should be fixed as:
if not explicitonly:
for f in match.files():
....
When the contents of .hgsubstate are stale (either because they've
manually been tweaked or partial updates have confused it), we get
confused about whether it actually needs committing.
So instead, we actively consult the parent's substate and compare it
the actual current state when deciding whether it needs committing.
Side effect: lots of "committing subrepo" messages that didn't
correspond with real commits disappear.
This change is fairly invasive for a fairly obscure condition, so it's
kept on the default branch.
When support for handling explicit paths in subrepos was added to the forget
command (155b89136ae7), subrepo recursion wasn't taken into account. This
change fixes that by pulling the majority of the logic of commands.forget into
cmdutil.forget, which can then be called from both there and subrepo.forget.
When support for handling explicit paths in subrepos was added to the add
command (825c4cefde4b), subrepo recursion wasn't taken into account. This
change adds an explicitonly argument to cmdutil.add to allow controlling which
levels of recursion should include only explicit paths versus all matched
paths.
When support for handling add/forget of explicit paths within subrepos was
added (825c4cefde4b/155b89136ae7), nested subrepos weren't handled properly.
This change adds test coverage to expose the broken behavior, which will be
fixed in later patches.
Globbing is usually used for filenames, so on windows it is reasonable and very
convenient that glob patterns accepts '\' or '/' when the pattern specifies
'/'.
This changeset flips the default value of ui.commitsubrepos setting
from True to False and adds a --subrepos flag to commit.
The commit, status, and diff commands behave like this with regard to
recusion and the ui.commitsubrepos setting:
| recurses | recurses
| by default | with --subrepos
--------+---------------+----------------
commit: | commitsubrepo | True
status: | False | True
diff: | False | True
By changing the default from True to False, the table becomes
consistent in the two columns:
* without --subrepos on the command line, commit will abort if a
subrepo is dirty and status/diff wont show changes inside subrepos.
* with --subrepos, all three commands will recurse.
A --subrepos flag on the command line overrides the config settin.g
Before, we deleted foo when we determined that there were zero
changesets in the foo subrepo. Any files in foo was deleted too. We
now delete foo/.hg instead, and the normal checks in hg.clone will
then abort if there are untracked files in foo.
Before, running 'hg archive -S' could result in
abort: unknown revision '65903cebad86f1a84bd4f1134f62fa7dcb7a1c98'!
if a subrepo was missing completely or had missing changesets. Now,
the missing changesets will be pulled or cloned as appropriate.
This make Mercurial subrepos match Git subrepos which already took
care to fetch any missing commits before starting the archive.
Subrepositories used to be created empty and then filled with data
using pull. This is wasteful when you do a clone from a local source
since it means that no hardlinks are created for the subrepos.
This patch make the hgsubrepo._get method check for an empty subrepo
and in that case do a clone instead of a pull. This brings in the same
data as before, but creates hardlinks when possible.
Deleted default arguments from test-sub-repo-recursion. Rationale is
that it is confusing to read, when the arguments aren't at each
command in the test
This adds a " (glob)" marker that works like a simpler version of
(re): "*" is converted to ".*", and "?" is converted to ".".
Both special characters can be escaped using "\", and the backslash
itself can be escaped as well.
Other glob-style syntax, like "**", "[chars]", or "[!chars]", isn't
supported.
Consider this test:
$ hg glog --template '{rev}:{node|short} "{desc}"\n'
@ 2:20c4f79fd7ac "3"
|
| o 1:38f24201dcab "2"
|/
o 0:2a18120dc1c9 "1"
Because each line beginning with "|" can be compiled as a regular
expression (equivalent to ".*|"), they will match any output.
Similarly:
$ echo foo
The blank output line can be compiled as a regular expression and will
also match any output.
With this patch, none of the above output lines will be matched as
regular expressions. A line must end in " (re)" in order to be matched
as one.
Lines are still matched literally first, so the following will pass:
$ echo 'foo (re)'
foo (re)
