I'm not sure why these weren't working on Windows. The failures were generally
in the style of:
- remote: phase-move: cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b: 1 -> 0
+ remote: "phase-move: $HG_NODE: $HG_OLDPHASE -> $HG_PHASE"
and
- abort: pretxnclose-bookmark.force-forward hook exited with status 1
- [255]
+ abort: pretxnclose-bookmark.force-public hook exited with status 255
+ [255]
These failures originated in 5625d0ddc285::6e3e88681b23.
The part we are using for pull is now used for push too. As we no longer use
pushkey, pushkey hooks are no longer triggered. This is an obvious backward
incompatible change. We could artificially trigger the pushkey hook within the
bundle2 part, but this seemed too hacky to me.
An option would be to disable by default this new mechanism for a couple of
versions to help people migrate to `txnclose-phase`. I took the liberal and
optimistic path to just turn it on by default directly.
.. bc::
Push no longer triggers a pushkey hook when updating phases. Use the new
`txnclose-phase` and `txnclose-phase` hooks instead.
(Applies when both server and client use version 4.4 or above).
The new 'txnclose-phase' hook expose the phase movement information stored in
'tr.changes['phases]'. To provide a simple and straightforward hook API to the
users, we introduce a new hook called for each revision affected. Since a
transaction can affect the phase of multiple changesets, updating the existing
'txnclose' hook to expose that information would be more complex. The data for
all moves will not fit in environment variables and iterations over each move
would be cumbersome. So the introduction of a new dedicated hook is
preferred in this changesets.
This does not exclude the addition of the full phase movement information to
the existing 'txnclose' in the future to help write more complex hooks.
The python hooks have access to the hook type information. There is not reason
for external hook to not be aware of it too.
For the record my use case is to make sure a hook script is configured for the
right type.
Hooks related to the transaction are aware of the transaction id. By definition
this txn-id is unique and different for each transaction. As a result it can
never be predicted in test and always needs matching. As a result, touching any
like with this data is annoying. We solve the problem once and for all by
installing an automatic replacement. In test, this will now show as:
TXNID=TXN:$ID$
This patch replaces hardcoded 127.0.0.1 with $LOCALIP in all tests.
Till now, the IPv6 series should make tests pass on common IPv6 systems
where the local device has the address "::1" and the hostname "localhost"
resolves to "::1".
On Windows platform, invoking printenv.py directly via hook is
problematic, because:
- unless binding between *.py suffix and python runtime, application
selector dialog is displayed, and running test is blocked at each
printenv.py invocations
- it isn't safe to assume binding between *.py suffix and python
runtime, because application binding is easily broken
For example, installing IDE (VisualStudio with Python Tools, or
so) often requires binding between source files and IDE itself.
This patch invokes printenv.py via sh -c for test portability. This is
a kind of follow up for 9e4331825bea, which eliminated explicit
"python" for printenv.py. There are already other 'sh -c "printenv.py"'
in *.t files, and this fix should be reasonable.
This changes were confirmed in cases below:
- without any application binding for *.py suffix
- with binding between *.py suffix and VisualStudio
This patch also replaces "echo + redirection" style with "heredoc"
style, because:
- hook command line is parsed by cmd.exe as shell at first, and
- single quotation can't quote arguments on cmd.exe, therefore,
- "printenv.py foobar" should be quoted by double quotation, but
- nested quoting (or tricky escaping) isn't readable
Sometimes a txnclose or changegroup hook wants to iterate through all
the changesets in transaction: in that situation usually the revset
`$HG_NODE:` is used to select the revisions. Unfortunately this revset
sometimes may contain too many changesets because we don't have the
write lock while the hook runs newer changes may be added to
repository in the meantime.
That's why there is a need for extra variable carrying the information about
the last change in the transaction.
When using bundle2, the phase pushkey parts are now made mandatory. As a
result, failure to update the bookmark server side will result in the transaction
being aborted.
$TESTDIR is added to the path, so this is superfluous. Also,
inconsistent use of quotes means we might have broken on tests with
paths containing spaces.
Now that we have a bundle1 version of this test, we can move the original
to bundle2. This lets us handle the ouput change from using the bundle2
protocol earlier.
addchangegroup creates a runhook function that is used to invoke the
changegroup and incoming hooks, but at the time the function is called,
the contents of hookargs associated with the transaction may have been
modified externally. For instance, bundle2 code affects it with
obsolescence markers and bookmarks info.
It also creates problems when a single transaction is used with multiple
changegroups added (as per an upcoming change), whereby the contents
of hookargs are that of after adding a latter changegroup when invoking
the hook for the first changegroup.
When a changegroup is added by a push on a publishing server, we ensure they
are added as public. This is used to enforce publishing on server when the
client is not aware of phases. It also prevents race conditions where a reader
could see the changesets as draft before they get turned public by the client.
Finally, this save rounds trip as the client does not need additional request to
turn them public.
However, this logic was only enforced when the changegroup was from a "push"
source. And "push" is used for local pushes only. Wireprotocol push uses "serve"
as source since Mercurial 1.9. We now enforce this logic for both "push" and
"serve" sources.
One could note that this logic was mainly useful during wireprotocol exchanges.
So this code is finally put into good use, 9 versions after its introduction.
It's preferable to report "ssl required" as an error, so that the client
can detect error and exit with 255. Currently hg exits with 1, which is
"nothing to push."
Many tests didn't change back from subdirectories at the end of the tests ...
and they don't have to. The missing 'cd ..' could always be added when another
test case is added to the test file.
This change do that tests (99.5%) consistently end up in $TESTDIR where they
started, thus making it simpler to extend them or move them around.
If push failed we should not expect the pushed changeset to exist on remote.
The common set before the push is used for phase related operation instead of
common + missing.
Note:
* We still pull phase data even if push fails
* We still try to push data even if push fails (same than bookmark)
The code now only exchange draft root and only care about movement related to
public//draft boundary.
There is multiple reason to simplify this code:
* Secret are never discovered anymore
* We decided to not support more the three existing phase
Removing phase index from pushkey (if ever decided) will be made in another commit.
The bugs seemed to show up when element not in future common changeset should
hold new hold phase data.
The whole phase push machinery was rewritten in the process.
If the working dir parent was destroyed by rollback, then the old
behaviour is perfectly reasonable: restore dirstate, branch, and
bookmarks. That way the working dir moves back to an existing
changeset rather than becoming an orphan.
But if the working dir parent was unaffected -- say, you updated to an
older changeset and then did rollback -- then it's silly to restore
dirstate and branch. So don't do that. Leave the status of the working
dir alone. (But always restore bookmarks, because that file refers to
changeset IDs that may have been destroyed.)
Send the command arguments in the HTTP headers. The command is still part
of the URL. If the server does not have the 'httpheader' capability, the
client will send the command arguments in the URL as it did previously.
Web servers typically allow more data to be placed within the headers than
in the URL, so this approach will:
- Avoid HTTP errors due to using a URL that is too large.
- Allow Mercurial to implement a more efficient wire protocol.
An alternate approach is to send the arguments as part of the request body.
This approach has been rejected because it requires the use of POST
requests, so it would break any existing configuration that relies on the
request type for authentication or caching.
Extensibility:
- The header size is provided by the server, which makes it possible to
introduce an hgrc setting for it.
- The client ignores the capability value after the first comma, which
allows more information to be included in the future.
This can be used to test that the client and server both fall back to the
previous wire protocol when the capability is not supported.
It is currently used by test-push-http.t and I plan to use it for the HTTP
long argument support tests.
Previously, when rolling back a transaction, some users could be confused
between the level to which the store is rolled back, and the new parents
of the working directory.
$ hg rollback
rolling back to revision 4 (undo commit)
With this change:
$ hg rollback
repository tip rolled back to tip revision 4 (undo commit)
working directory now based on revision 2 and 1
So now the user can realize that the store has been rolled back to an older
tip, but also that the working directory may not on the tip (here we are
rolling back the merge of the heads 2 and 1)
