The home of 'Abort' is 'error' not 'util' however, a lot of code seems to be
confused about that and gives all the credit to 'util' instead of the
hardworking 'error'. In a spirit of equity, we break the cycle of injustice and
give back to 'error' the respect it deserves. And screw that 'util' poser.
For great justice.
In 03e658289ff6, there was an attempt to fallback to looking up the update
revision assuming it was always a rev but the documentation states:
True means update to default rev, anything else is treated as a revision
Therefore, we should only fallback to looking up the update rev if it is not
True. This bug was found in hg-git and I couldn't think of a test that does
this in pure Mercurial since the source repository is checked for the revision
as well (and therefore gracefully falls back).
cachedlocalrepo.copy() didn't actually create new localrepository
instances. This meant that the new thread isolation code in hgweb wasn't
actually using separate localrepository instances, even though it was
properly using separate cachedlocalrepo instances.
Because the behavior of the API changed, the single caller in hgweb had
to be refactored to always call _webifyrepo() or it may not have used
the proper filter.
I confirmed via print() debugging that id(repo) is in fact different on
each thread. This was not the case before.
For reasons I can't yet explain, this does not fix issue4756. I suspect
there is shared cache somewhere that isn't thread safe.
hgweb contained code for determining whether a cached localrepository
instance was up to date. This code was way too low-level to be in
hgweb.
This functionality has been moved to a new "cachedlocalrepo" class
in hg.py. The code has been changed slightly to facilitate use
inside a class. hgweb has been refactored to use the new API.
As part of this refactor, hgweb.repo no longer exists! We're very close
to using a distinct repo instance per thread.
The new cache records state when it is created. This intelligence
prevents an extra localrepository from being created on the first
hgweb request. This is why some redundant output from test-extension.t
has gone away.
Before this patch if clone --updaterev points to branch which head
on src repo wasnt in dest repo, clone updated dest repo to
default branch. After applying this patch, if changeset from
src repo pointing at given branch is not in dest repo, it searches
for changeset pointing for given branch locally in dest repo.
Lookup in destination repo:
559: uprev = destrepo.lookup(update)
is wrapped by try/except block to preserve current behaviour when
given revset to -u is not found - it will not fail,but silently update
dest repo to head of default branch.
Before this patch, when auto sharing is enabled, 'hg.clone()' tries to
create local clone regardless of locality of the clone destination on
the host, and causes failure.
To avoid auto sharing when the clone destination is remote, this patch
adds examination of 'islocal(dest)' before auto sharing in
'hg.clone()'.
'islocal(dest)' is examined after 'sharepool', because:
- the former is more expensive than the latter
- without enabling share extension, the later is always negative
Many 3rd party consumers of Mercurial have created wrappers to
essentially perform clone+share as a single operation. This is
especially popular in automated processes like continuous integration
systems. The Jenkins CI software and Mozilla's Firefox release
automation infrastructure have both implemented custom code that
effectively perform clone+share. The common use case here is that
clients want to obtain N>1 checkouts while minimizing disk space and
network requirements. Furthermore, they often don't care that a clone
is an exact mirror of a remote: they are simply looking to obtain
checkouts of specific revisions.
When multiple third parties implement a similar feature, it's a good
sign that the feature is worth adding to the core product. This patch
adds support for an easy-to-use clone+share feature.
The internal "clone" function now accepts options to control auto
sharing during clone. When the auto share mode is active, a store will
be created/updated under the base directory specified and a new
repository pointing to the shared store will be created at the path
specified by the user.
The share extension has grown the ability to pass these options into
the clone command/function.
No command line options for this feature are added because we don't
feel the feature will be popular enough to warrant their existence.
There are two modes for auto share mode. In the default mode, the shared
repo is derived from the first changeset (rev 0) in the remote
repository. This enables related repositories existing at different URLs
to automatically use the same storage. In environments that operate
several repositories (separate repo for branch/head/bookmark or separate
repo per user), this has the potential to drastically reduce storage
and network requirements. In the other mode, the name is derived from the
remote's path/URL.
Python 2.6 introduced the "except type as instance" syntax, replacing
the "except type, instance" syntax that came before. Python 3 dropped
support for the latter syntax. Since we no longer support Python 2.4 or
2.5, we have no need to continue supporting the "except type, instance".
This patch mass rewrites the exception syntax to be Python 2.6+ and
Python 3 compatible.
This patch was produced by running `2to3 -f except -w -n .`.
While hopefully atypical, there are reasons that a subrepository revision can be
lost that aren't covered by corruption of the .hgsubstate revlog. Such things
can happen when a subrepo is amended, stripped or simply isn't pulled from
upstream because the parent repo revision wasn't updated yet. There's no way to
know if it is an error, but this will find potential problems sooner than when
some random revision is updated.
Until recently, convert made no attempt at rewriting the .hgsubstate file. The
impetuous for this is to verify the conversion of some repositories, and this is
orders of magnitude faster than a bash script from 0..tip that does an
'hg update -C $rev'. But it is equally useful to determine if everything has
been pulled down before taking a thumb drive on the go.
It feels somewhat wrong to leave this out of verifymod (mostly because the file
is already read in there, and the final summary is printed before the subrepos
are checked). But verifymod looks very low level, so importing subrepo stuff
there seems more wrong.
If a "thing" is callable but raises TypeError for some reason, a callable
object would be returned. Thereafter, unfriendly traceback would be displayed:
Traceback (most recent call last):
...
File "mercurial/hg.pyc", line 119, in _peerorrepo
obj = _peerlookup(path).instance(ui, path, create)
AttributeError: 'function' object has no attribute 'instance'
Instead, we should show the reason why "thing(path)" didn't work:
Traceback (most recent call last):
...
File "hggit/__init__.py", line 89, in _local
p = urlcls(path).localpath()
TypeError: 'NoneType' object is not callable
If a "thing" is not callable, it must be a module or an object that implements
instance(). If that module didn't have instance(), the error message would be
"<unloaded module 'foo'> object is not callable". It doesn't make perfect sense,
but it isn't so bad as it can blame which module went wrong.
Today, the terms 'active' and 'current' are interchangeably used throughout the
codebase in reference to the active bookmark (the bookmark that will be updated
with the next commit). This leads to confusion among developers and users.
This patch is part of a series to standardize the usage to 'active' throughout
the mercurial codebase and user interface.
Although Python supports `X = Y if COND else Z`, this was only
introduced in Python 2.5. Since we have to support Python 2.4, it was
a very common thing to write instead `X = COND and Y or Z`, which is a
bit obscure at a glance. It requires some intricate knowledge of
Python to understand how to parse these one-liners.
We change instead all of these one-liners to 4-liners. This was
executed with the following perlism:
find -name "*.py" -exec perl -pi -e 's,(\s*)([\.\w]+) = \(?(\S+)\s+and\s+(\S*)\)?\s+or\s+(\S*)$,$1if $3:\n$1 $2 = $4\n$1else:\n$1 $2 = $5,' {} \;
I tweaked the following cases from the automatic Perl output:
prev = (parents and parents[0]) or nullid
port = (use_ssl and 443 or 80)
cwd = (pats and repo.getcwd()) or ''
rename = fctx and webutil.renamelink(fctx) or []
ctx = fctx and fctx or ctx
self.base = (mapfile and os.path.dirname(mapfile)) or ''
I also added some newlines wherever they seemd appropriate for readability
There are probably a few ersatz ternary operators still in the code
somewhere, lurking away from the power of a simple regex.
The next patch will enable verification by using the system's CA store if
possible, which means we would have to distinguish None (=use default) from
'' (=--insecure). This smells bug-prone and provides no way to override
web.cacerts to forcibly use the system's store by --config argument.
This patch changes the meaning of web.cacerts as follows:
value behavior
------- ---------------------------------------
None/'' use default
'!' never use CA certs (set by --insecure)
<path> verify by the specified CA certificates
Values other than <path> are for internal use and therefore undocumented.
0e5f75a52c9d introduced a way to share bookmarks. When a repository share that
shares bookmarks was created, a .hg/bookmarks.shared file was created to mark
the repository share as one that shares its bookmarks.
We have plans to introduce other levels of sharing, including a "full share"
mode. Rather than creating a new ".shared" file for each new thing that we may
want to share It seems better to create a single "shared" file that will list
what is shared for a given shared repository. This should make it much easier
to get a list of everything that is shared by a given shared repository.
The shared file contains a list of shared "items" (such as bookmarks). Each
shared "item" is added as a new line in the file. For now the only possible
entry in the file is "bookmarks".
This change touches every module in which repository.opener was being used, and
changes it for the equivalent repository.vfs. This is meant to make it easier
to split the repository.vfs into several separate vfs.
It should now be possible to remove localrepo.opener.
This patch adds the -B/--bookmarks option to the share command added by the
share extension. All it does for now is create a marker, 'bookmarks.shared',
that will be used by future code to implement the sharing functionality.
This just copies the same local sample hgrc, except it sets the
default path to the repo it was cloned from.
This is cut-and-paste from the local sample hgrc, but I think it's
acceptable, since the two pieces of code are right next to each other
and they're small. There is danger of them going out of synch, but it
would complicate the code too much to get rid of this C&P.
I also add ui as an import to hg.py, but with demandimport, this
should not be a noticeable performance hit.
We need to explicitly push all local bookmarks when doing the clone from a local
repo to a remote one through ssh. This will let us remove the manual export of
bookmarks in clone and rely on the official exchange in push and pull instead.
Now that the standard pull function includes bookmarks, we need to ensure that
a copy clone also copies the bookmarks. This will let us drop the manual bookmark
pulling done independently during a clone.
Some users clone from a server before ever running 'hg config --edit',
so they don't see our helpful template for things like enabling the
username. Attempt to give them some helpful guidance.
Local clones copy/hardlink over files directly, so the branchcaches should all
be valid. There's a slight chance that a read operation would update one of the
branchcaches, but we hold a lock over the source repo so they shouldn't cause
an invalid branchcache to be copied over, just a different, valid one.
This patch uses destvfs with base as .hg directory in shared destination
repository to update filesystem function with vfs. Some methods are changed to
use vfs functions with destvfs.
branch 'default' HG: bookmark '@' HG: changed mercurial/hg.py
In this patch, dstwvfs is added to use vfs functions in working directory of
destination shared repository. Existing filesystem operations are updated
to use vfs functions through dstwvfs.
Add custom conflict markers 'working copy' and 'destination' for doing hg update
when there are conflicts between your working copy and the destination.
This patch introduces "outgoinghooks" to avoid redundant outgoing
check for "hg outgoing" in other than "commands.outgoing" (or utility
functions used by it).
This patch makes "_outgoing()" return peer object for remote
repository, to avoid re-execution "expandpath()", "parseurl()", and
"peer()" on caller side for specified URL.
This patch makes "_outgoing()" return empty list instead of "None", if
there are no outgoing changesets, because:
- returning "None" requires callers to examine whether returned
value is "None" or not explicitly, if callers want to execute loop
on returned value, but
- there are no explicit needs to return "None"
Before this patch, "contrib/check-code.py" can't detect these
problems, because the regexp pattern to detect "% inside _()" doesn't
suppose the case that the format string and "%" aren't placed in the
same line.
This patch replaces "\s" in that regexp pattern with "[ \t\n]" to
detect "% inside _()" problems in such case.
"[\s\n]" can't be used in this purpose, because "\s" is automatically
replaced with "[ \t]" by "_preparepats()" and "\s" in "[]" causes
nested "[]" unexpectedly.
Since changeset a8955c4d9ef5, "reposetup()" of each extensions is
invoked only on repositories enabling corresponded extensions.
This causes that largefiles specific interactions between the
repository enabling largefiles locally and remote (wire) peer fail,
because there is no way to know whether largefiles is enabled on the
remote repository behind the wire peer, and largefiles specific
"wireproto functions" are not given to any wire peers.
To avoid this problem, largefiles should be enabled in wider scope
than each repositories (e.g. user-wide "${HOME}/.hgrc").
This patch introduces "wirepeersetupfuncs" to setup wire peer by
extensions already enabled. Functions registered into
"wirepeersetupfuncs" are invoked for all wire peers.
This patch uses plain list instead of "util.hooks" for
"wirepeersetupfuncs", because the former allows to control order of
function invocation by order of extension enabling: it may be useful
for workaround of problems with combination of enabled extensions
This should correct an earlier couple of bad merges (5433856b2558 and
596960a4ad0d, now pruned) that accidentally brought in a change that had
been marked obsolete (244ac996a821).
Changset 39a4d61c40d6 rewriting "hg.copystore()" with vfs uses
'dstbase + "/lock"' instead of "os.path.join()", because target files
given from "store.copyfiles()" already uses "/" as path separator
But in the repository using revlog format 0, "dstbase" becomes empty
("data" directory is located under ".hg" directly), and 'dstbase +
"/lock"' is treated as "/lock": in almost all cases, write access to
"/lock" causes "permission denied".
This patch uses "os.path.join()" to join path components which may be
empty in "hg.copystore()".