Previously, if a subrepo parent had 'web.hidden=True' set, neither the parent
nor child had a repository entry. However, the directory entry for the parent
would be listed (it wouldn't have the fancy 'web.name' if configured), and that
link went to the repo's summary page, effectively making it not hidden.
This simply disables the directory processing if a valid repository is present.
Whether or not the subrepo should be hidden is debatable, but this leaves that
behavior unchanged (i.e. it stays hidden).
Previously, when 'web.name' was set on a subrepo parent and 'web.collapse=True',
the parent repo would show in the list with the configured 'web.name', and a
directory with the parent repo's filesystem name (with a trailing slash) would
also appear. The subrepo(s) would unexpectedly be excluded from the list of
repositories. Clicking the directory entry would go right to the repo page.
Now both the parent and the subrepos show up, without the additional directory
entry.
The configured hgweb paths used '**' for finding the repos in this scenario.
A couple of notes about the tests:
- The area where the subrepo was added has a comment that it tests subrepos,
though none previously existed there. One now does.
- The 'web.descend' option is required for collapse to work. I'm not sure what
the previous expectations were for the test. Nothing changed with it set,
prior to adding the code in this patch. It is however required for this test.
- The only output changes are for the hyperlinks, obviously because of the
'web.name' parameter.
- Without this code change, there would be an additional diff:
--- /usr/local/mercurial/tests/test-hgwebdir.t
+++ /usr/local/mercurial/tests/test-hgwebdir.t.err
@@ -951,7 +951,7 @@
/rcoll/notrepo/e/
/rcoll/notrepo/e/e2/
/rcoll/notrepo/f/
- /rcoll/notrepo/f/f2/
+ /rcoll/notrepo/f/
Test repositories inside intermediate directories
I'm not sure why the fancy name doesn't come out, but it is enough to
demonstrate that the parent is not listed redundantly, and the subrepo isn't
skipped.
Some extensions set configuration settings that showed up in 'hg showconfig
--debug' with 'none' as source. That was confusing.
Instead, they will now tell which extension they come from.
This change tries to be consistent and specify a source everywhere - also where
it perhaps is less relevant.
Until now, repositories did not provide any value for isdirectory in rows
produced for the index output, and thus isdirectory was generally evaluated as
None for each index entry representing a repository.
However, directories (visible when viewed with the descend and collapse
settings enabled) did provide a value of True and this value appeared to
persist in subsequent rows processed by the templater, causing isdirectory
tests in templates to produce incorrect results for index entries appearing
after directories.
This patch asserts the None value for repositories, thus erasing any such
persistent True values.
The web.prefix setting was being ignored when creating the index URL
breadcrumbs.
We only need to fix hgwebdir and not hgweb because hgweb gets the complete URL
request, including the prefix, while hgwebdir gets a "subdir" which does not
include the prefix.
This fix is slightly different of what was suggested on the bug tracker. In
there it was suggested to hide the prefix itself from the breadcrumb. I think
that would be a better solution, but it would require changing all the index
templates and passing the prefix to the template engine, which may be too big
a change for stable during the freeze. For now this fixes the problem, and the
fix could be improved during the next cycle.
The purpose of this change is to make it much easier to navigate up the
repository tree when the hg web server is used to serve more than one
repository.
A "URL breadcrumb" is a path where each of the path items can be clicked to go
to the corresponding path page.
This lets you go up the folder hierarchy very quickly. For example, when showing
the list of repositories in http://myserver/myteams/myprojects, the following
"breadcrumb" will be shown:
Mercurial > myteams > myprojects
Clicking on "myprojects" reloads the page. Clicking on "myteams" goes up one
folder. Clicking on the leftmost "Mercurial" goes to the server root.
This "breadcrumb" also appears on all repository pages. For example on the
summary page of the repository at http://myserver/myteams/myprojects/myrepo the
following will be shown:
Mercurial > myteams > myprojects > myrepo / summary
This change has been applied to all templates that already had a link to the
main repository page (i.e. gitweb, monoblue, paper and coal) plus to the index
page of the spartan template.
In order to make the breadcumb links stand out the some of the template styles
have been customized.
Up until now the templates that show RSS and Atom feeds on the "repository
lists" (i.e. gitweb and monoblue) showed them for all entries, including regular
folders. Clicking on those "folder RSS" links would result in an error page
being shown.
This patch hides those links for regular folders.
The existing help only walked through an example.
Now we first explain the basic rules and then show an example.
The 'collections' example and description only cause confusion and is removed.
Bikeshedded by Patrick Mezard <patrick@mezard.eu>
The descend option in hgweb can be used to display all reachable repositories
within a directory hierarchy if set to True. However, all reachable
repositories, regardless of their depth below the root of the hierarchy, are
then listed at the same level - expanded - in the hgweb interface. This patch
adds support for showing only each level of a directory hierarchy, with
subrepositories being shown alongside their parent repositories only at the
appropriate level (because there is no way to navigate to subrepositories from
within repositories), and the contents of directories hidden - collapsed -
behind a link for each directory. To enable this multi-level navigation, a new
option called collapse must be set to True when the descend option is set to
True.
This change complements the existing web/logourl setting, and lets the user
customize the logo image that is shown on many of the hg server pages.
If this setting is not set, hglogo.png is used.
The introduction of the new URL parsing code has created a startup
time regression. This is mainly due to the use of url.hasscheme() in
the ui class. It ends up importing many libraries that the url module
requires.
This fix helps marginally, but if we can get rid of the urllib import
in the URL parser all together, startup time will go back to normal.
perfstartup time before the URL refactoring (707e4b1e8064):
! wall 0.050692 comb 0.000000 user 0.000000 sys 0.000000 (best of 100)
current startup time (9ad1dce9e7f4):
! wall 0.070685 comb 0.000000 user 0.000000 sys 0.000000 (best of 100)
after this change:
! wall 0.064667 comb 0.000000 user 0.000000 sys 0.000000 (best of 100)
Clicking on the logo image/text in the hgweb interface brings the
user to the Mercurial project page. The majority of users expect that
this would bring them to the top level index. I have added a new template
variable named `logourl' which allows an administrator to change this
behavior. To stay compatible with existing behavior, `logourl' will
default to http://mercurial.selenic.com/. This change is very useful in
large installations where jumping to the index is common.
Repository() raises a number of IOErrors in addition to RepoErrors.
these are just as uninteresting as RepoErrors and should be ignored
The easiest case of this is a repo whose .hg/ directory is -rx
The archive list generator was holding a reference to each
temporary ui copy passed by rawentries(), so the memory
usage for index generation growed proportionally to the
ui object size and the amount of repositories. By returning a
list instead, the temporary reference is dropped immediately.
8aa8db6deb47 moved the subdirectory match inside the repository match
loop. A virtual path existing/path/invalid/path would then match
existing/path, and generate a wrong index page.
If hgweb.config contains wrong path mapping, hgweb causes internal server
error on repository index page.
This patch changes makeindex() to ignore RepoError, because it looks to be
designed to suppress configuration error.
This allows the (to me, in some setups) obvious configuration:
[paths]
/ = *
or
/ = **
Relative paths used to work with [collections] even though it isn't documented.
Perhaps it should be documented?
This fixes doubled URL, e.g. http://example.orghttp://example.org/...,
which appears on RSS/Atom feeds served by hgwebdir.
It splits baseurl to update SERVER_NAME, SERVER_PORT and SCRIPT_NAME,
according to RFC 3875.
Updated the test output since SCRIPT_NAME becomes not to contain
http://host:port part.