gitbutler/DEVELOPMENT.md

# How to Hack on GitButler

Alrighty, you want to get compiling. We love you already. Your parents raised
you right. Let's get started.

---

## Table of Contents

- [Overview](#overview)
- [The Basics](#the-basics)
    - [Prerequisites](#prerequisites)
    - [Install dependencies](#install-dependencies)
    - [Run the app](#run-the-app)
    - [Lint & format](#lint--format)
- [Debugging](#debugging)
    - [Logs](#logs)
    - [Tokio](#tokio)
- [Building](#building)
    - [Building on Windows](#building-on-windows)
    - [File permissions](#file-permissions)
    - [Perl](#perl)
    - [Crosscompilation](#crosscompilation)
- [Design](#design)
- [Contributing](#contributing)
- [Some Other Random Notes](#some-other-random-notes)
    - [Icon generation](#icon-generation)
    - [Release](#release)
    - [Versioning](#versioning)
    - [Publishing](#publishing)
- [Development mode OAuth login](#development-mode-oauth-login)
- [Joining the GitButler Team](#joining-the-gitbutler-team)


---

## Overview

So how does this whole thing work?

It's a [Tauri app](https://tauri.app/), which is basically like an Electron app,
in that we can develop a desktop app from one source with multiple OS targets
and write the UI in HTML and Javascript. Except instead of Node for the
filesystem access part, Tauri uses [Rust](https://www.rust-lang.org/).

So everything that hits disk is in Rust, everything that the
user sees is in HTML/JS. Specifically we use [Svelte](https://svelte.dev/)
in Typescript for that layer.

---

## The Basics

OK, let's get it running.

### Prerequisites

First of all, this is a Tauri app, which is a Rust app. So go install Rust.
The Tauri site has a good primer for the various platforms
[here](https://tauri.app/v1/guides/getting-started/prerequisites).

The next major thing is `pnpm` (because we're a little cooler than people who
use `npm`), so check out how to install that
[here](https://pnpm.io/installation).

### Install dependencies

Next, install the app dependencies.

I hope you have some disk space for 300M of `node_modules`, because this bad
boy will fill er up:

```bash
$ pnpm install
```

You'll have to re-run this occasionally when our deps change.

### Run the app

First, run cargo build such that supplementary bins such as `gitbutler-git-askpass` and `gitbutler-git-setsid` are created:

```bash
$ cargo build
```

Now you should be able to run the app in development mode:

```bash
$ pnpm tauri dev
```

By default it will not print debug logs to console. If you want debug logs, set `LOG_LEVEL` environment variable:

```bash
$ LOG_LEVEL=debug pnpm tauri dev
```

### Lint & format

In order to have a PR accepted, you need to make sure everything passes our
Linters, so make sure to run these before submitting. Our CI will shame you
if you don't.

Javascript:

```bash
$ pnpm lint
$ pnpm format
```

Rust:

```bash
$ cargo clippy   # see linting errors
$ cargo fmt      # format code
```

---

## Debugging

Now that you have the app running, here are some hints for debugging whatever
it is that you're working on.

### Logs

The app writes logs into:

1. `stdout` in development mode
2. The Tauri [logs](https://tauri.app/v1/api/js/path/#platform-specific) directory

### Tokio

We are also collecting tokio's runtime tracing information that could be viewed using [tokio-console](https://github.com/tokio-rs/console#tokio-console-prototypes):

-   development:
    ```bash
    $ tokio-console
    ```
-   nightly:
    ```bash
    $ tokio-console http://127.0.0.1:6668
    ```
-   production:
    ```bash
    $ tokio-console http://127.0.0.1:6667
    ```

---

## Building

To build the app in production mode, run:

```bash
$ pnpm tauri build --features devtools --config crates/gitbutler-tauri/tauri.conf.nightly.json
```

This will make an asset similar to our nightly build.

### Building on Windows

Building on Windows is a bit of a tricky process. Here are some helpful tips.

### File permissions

We use `pnpm`, which requires a relatively recent version of Node.js.
Make sure that the latest stable version of Node.js is installed and
on the PATH, and then `npm i -g pnpm`.

Sometimes npm's prefix is incorrect on Windows, we can check this via:

```sh
npm config get prefix
```

If it's not `C:\Users\<username>\AppData\Roaming\npm` or another folder that is 
normally writable, then we can set it in Powershell:

```sh
mkdir -p $APPDATA\npm
npm config set prefix $env:APPDATA\npm
```

Afterwards, add this folder to your PATH.

### Perl

A Perl interpreter is required to be installed in order to configure the `openssl-sys`
crate. We've used [Strawberry Perl](https://strawberryperl.com/) without issue.
Make sure it's installed and `perl` is available on the `PATH` (it is by default
after installation, just make sure to restart the terminal after installing).
[Scoop](https://scoop.sh/) users can install this via `scoop install perl`.

Note that it might appear that the build has hung or frozen on the `openssl-sys` crate.
It's not, it's just that Cargo can't report the status of a C/C++ build happening
under the hood, and openssl is _large_. It'll take a while to compile.

### Crosscompilation

This paragraph is about crosscompilation to x86_64-MSVC from ARM Windows,
a configuration typical for people with Apple Silicon and Parallels VMs,
which only allow ARM Windows to be used.

The `winapi` dependency on `gitbutler-git` doesn't currently compile on ARM,
which means cross-compilation to x86-64 is required to workaround that. Besides,
most users will probably still be on INTEL machines, making this capability 
a common requirement.

In a Git `bash`, *with MSVC for x86-64 installed on the system*, run the following
to prepare the environment.

```bash
export TRIPLE_OVERRIDE=x86_64-pc-windows-msvc
export CARGO_BUILD_TARGET=x86_64-pc-windows-msvc
export OPENSSL_SRC_PERL="c:/Strawberry/perl/bin/perl.exe"
```

Here is how to produce a nightly release build:

```
pnpm tauri build --features windows,devtools --config  crates/gitbutler-tauri/tauri.conf.nightly.json
```

And this is how to get a local developer debug build:

```bash
pnpm tauri dev --features windows --target x86_64-pc-windows-msvc
```

Note that it's necessary to repeat the `--target` specification as otherwise the final copy operation doesn't work,
triggered by `tauri` itself.

---

## Design

We use [Figma](https://www.figma.com/) for our design work.
If you're a designer (and even if you're not), you want to contribute to the
design of GitButler, or your work involves UI, you could duplicate our design file.

GitButler design: [Figma file](https://www.figma.com/file/FbeLt0yjY9RiNn8MXUXsYs/Client-Design?type=design&node-id=0%3A1&mode=design&t=MUDQhR3iOM3DpI9m-1) 🎨

---

## Contributing

Now that you're up and running, if you want to change something and open a PR
for us, make sure to read [CONTRIBUTING.md](CONTRIBUTING.md) to make sure you're
not wasting your time.

---

## Some Other Random Notes

Most of this is for internal GitButler use, but maybe everyone else will find
it interesting too.

---

### Icon generation

I always forget how to do this, but when we update our app icon, run this to
import it.

```bash
$ pnpm tauri icon path/to/icon.png
```

### Release

Building is done via [GitHub Action](https://github.com/gitbutlerapp/gitbutler/actions/workflows/publish.yaml).
Go to the link and select `Run workflow` from the desired branch.

### Versioning

When running the [release action](https://github.com/gitbutlerapp/gitbutler/actions/workflows/publish.yaml),
you will have to choose one of `major`, `minor`, or `patch` release type. Action will generate a new version based on your input and current
version found at `https://app.gitbutler.com/releases`.

### Publishing

To publish a version that you've just build, use [Release Manager](https://gitbutler.retool.com/apps/cb9cbed6-ae0a-11ed-918c-736c4335d3af/Release%20Manager).

---

## Development mode OAuth login

By default, you will not be able to log into GitButler using Github/Google because the base url does not match. To be able to do this add ( or update ) the following line to your `.env.development` file. You will need to create the file if it does not exist.

```
PUBLIC_API_BASE_URL=https://app.gitbutler.com/
```

---

## Joining the GitButler Team

If you are interested in joining our small but tightly knit engineering team, we are currently looking for the following roles:

- [Senior Rust developer](https://gitbutler.homerun.co/senior-rust-developer) (Onsite Berlin)
- [Senior TypeScript developer](https://gitbutler.homerun.co/senior-typescript-developer) (Onsite Berlin)
- [Senior Rails developer](https://gitbutler.homerun.co/senior-rails-developer) (Onsite Berlin)