graphql-engine/server/tests-py/test_subscriptions.py

569 lines
20 KiB
Python
Raw Normal View History

2018-09-18 09:21:57 +03:00
#!/usr/bin/env python3
import time
2018-09-18 09:21:57 +03:00
import pytest
import json
import queue
import ruamel.yaml as yaml
from validate import check_query_f
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
usefixtures = pytest.mark.usefixtures
@pytest.fixture(scope='class')
def ws_conn_init(hge_ctx, ws_client):
init_ws_conn(hge_ctx, ws_client)
@pytest.fixture(scope='class')
def ws_conn_init_graphql_ws(hge_ctx, ws_client_graphql_ws):
init_graphql_ws_conn(hge_ctx, ws_client_graphql_ws)
'''
Refer: https://github.com/apollographql/subscriptions-transport-ws/blob/master/PROTOCOL.md#gql_connection_init
'''
2018-10-30 12:21:58 +03:00
def init_ws_conn(hge_ctx, ws_client, payload = None):
if payload is None:
payload = {}
if hge_ctx.hge_key is not None:
payload = {
'headers' : {
'X-Hasura-Admin-Secret': hge_ctx.hge_key
}
}
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
init_msg = {
'type': 'connection_init',
'payload': payload,
}
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
ws_client.send(init_msg)
ev = ws_client.get_ws_event(3)
assert ev['type'] == 'connection_ack', ev
2018-09-18 09:21:57 +03:00
def init_graphql_ws_conn(hge_ctx, ws_client_graphql_ws, payload = None):
if payload is None:
payload = {}
if hge_ctx.hge_key is not None:
payload = {
'headers' : {
'X-Hasura-Admin-Secret': hge_ctx.hge_key
}
}
init_msg = {
'type': 'connection_init',
'payload': payload,
}
ws_client_graphql_ws.send(init_msg)
ev = ws_client_graphql_ws.get_ws_event(3)
assert ev['type'] == 'connection_ack', ev
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
class TestSubscriptionCtrl(object):
def test_init_without_payload(self, hge_ctx, ws_client):
if hge_ctx.hge_key is not None:
pytest.skip("Payload is needed when admin secret is set")
init_msg = {
'type': 'connection_init'
}
ws_client.send(init_msg)
ev = ws_client.get_ws_event(15)
assert ev['type'] == 'connection_ack', ev
'''
Refer: https://github.com/apollographql/subscriptions-transport-ws/blob/master/PROTOCOL.md#gql_connection_init
'''
def test_init(self, hge_ctx, ws_client):
init_ws_conn(hge_ctx, ws_client)
'''
Refer: https://github.com/apollographql/subscriptions-transport-ws/blob/master/PROTOCOL.md#gql_connection_terminate
'''
def test_connection_terminate(self, hge_ctx, ws_client):
obj = {
'type': 'connection_terminate'
}
ws_client.send(obj)
with pytest.raises(queue.Empty):
ev = ws_client.get_ws_event(3)
2018-10-30 12:21:58 +03:00
@pytest.mark.parametrize("backend", ['mssql', 'postgres'])
@usefixtures('per_class_tests_db_state', 'ws_conn_init')
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
class TestSubscriptionBasic:
@classmethod
def dir(cls):
return 'queries/subscriptions/basic'
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
@pytest.mark.parametrize("transport", ['http', 'websocket', 'subscription'])
def test_negative(self, hge_ctx, transport):
check_query_f(hge_ctx, self.dir() + '/negative_test.yaml', transport)
2018-09-18 09:21:57 +03:00
'''
Refer: https://github.com/apollographql/subscriptions-transport-ws/blob/master/PROTOCOL.md#gql_connection_error
'''
2018-10-30 12:21:58 +03:00
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_connection_error(self, ws_client):
ws_client.send({'type': 'test'})
ev = ws_client.get_ws_event(15)
2018-09-18 09:21:57 +03:00
assert ev['type'] == 'connection_error', ev
'''
Refer: https://github.com/apollographql/subscriptions-transport-ws/blob/master/PROTOCOL.md#gql_start
'''
2018-10-30 12:21:58 +03:00
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_start(self, ws_client):
2018-09-18 09:21:57 +03:00
query = """
subscription {
hge_tests_test_t1(order_by: {c1: desc}, limit: 1) {
2018-09-18 09:21:57 +03:00
c1,
c2
}
}
"""
obj = {
'id': '1',
'payload': {
'query': query
},
'type': 'start'
}
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
ws_client.send(obj)
2018-09-18 09:21:57 +03:00
'''
Refer: https://github.com/apollographql/subscriptions-transport-ws/blob/master/PROTOCOL.md#gql_data
'''
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
ev = ws_client.get_ws_query_event('1',15)
2018-09-18 09:21:57 +03:00
assert ev['type'] == 'data' and ev['id'] == '1', ev
'''
Refer https://github.com/apollographql/subscriptions-transport-ws/blob/01e0b2b65df07c52f5831cce5c858966ba095993/src/server.ts#L306
'''
@pytest.mark.skip(reason="refer https://github.com/hasura/graphql-engine/pull/387#issuecomment-421343098")
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_start_duplicate(self, ws_client):
self.test_start(ws_client)
2018-09-18 09:21:57 +03:00
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_stop_without_id(self, ws_client):
2018-09-18 09:21:57 +03:00
obj = {
'type': 'stop'
}
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
ws_client.send(obj)
ev = ws_client.get_ws_event(3)
2018-09-18 09:21:57 +03:00
assert ev['type'] == 'connection_error', ev
'''
Refer https://github.com/apollographql/subscriptions-transport-ws/blob/master/PROTOCOL.md#gql_stop
'''
2018-10-30 12:21:58 +03:00
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_stop(self, ws_client):
2018-09-18 09:21:57 +03:00
obj = {
'type': 'stop',
'id': '1'
}
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
ws_client.send(obj)
with pytest.raises(queue.Empty):
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
ev = ws_client.get_ws_event(3)
2018-09-18 09:21:57 +03:00
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_start_after_stop(self, ws_client):
self.test_start(ws_client)
self.test_stop(ws_client)
2018-09-18 09:21:57 +03:00
'''
Refer: https://github.com/apollographql/subscriptions-transport-ws/blob/master/PROTOCOL.md#gql_complete
'''
2018-10-30 12:21:58 +03:00
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_complete(self, hge_ctx, ws_client):
2018-09-18 09:21:57 +03:00
query = """
query {
hge_tests_test_t1(order_by: {c1: desc}, limit: 1) {
2018-09-18 09:21:57 +03:00
c1,
c2
}
}
"""
obj = {
'id': '2',
'payload': {
'query': query
},
'type': 'start'
}
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
ws_client.send(obj)
ev = ws_client.get_ws_query_event('2',3)
2018-09-18 09:21:57 +03:00
assert ev['type'] == 'data' and ev['id'] == '2', ev
# Check for complete type
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
ev = ws_client.get_ws_query_event('2',3)
2018-09-18 09:21:57 +03:00
assert ev['type'] == 'complete' and ev['id'] == '2', ev
## NOTE: The same tests as in TestSubcscriptionBasic but with
## the subscription transport being used is `graphql-ws`
## FIXME: There's an issue with the tests being parametrized with both
## postgres and mssql data sources enabled(See issue #2084).
@usefixtures('per_method_tests_db_state', 'ws_conn_init_graphql_ws')
class TestSubscriptionBasicGraphQLWS:
@classmethod
def dir(cls):
return 'queries/subscriptions/basic'
@pytest.mark.parametrize("transport", ['http', 'websocket', 'subscription'])
def test_negative(self, hge_ctx, transport):
check_query_f(hge_ctx, self.dir() + '/negative_test.yaml', transport, gqlws=True)
def test_connection_error(self, hge_ctx, ws_client_graphql_ws):
if ws_client_graphql_ws.get_conn_close_state():
ws_client_graphql_ws.create_conn()
if hge_ctx.hge_key == None:
ws_client_graphql_ws.init()
else:
ws_client_graphql_ws.init_as_admin()
ws_client_graphql_ws.send({'type': 'test'})
time.sleep(2)
ev = ws_client_graphql_ws.get_conn_close_state()
assert ev == True, ev
def test_start(self, hge_ctx, ws_client_graphql_ws):
if ws_client_graphql_ws.get_conn_close_state():
ws_client_graphql_ws.create_conn()
if hge_ctx.hge_key == None:
ws_client_graphql_ws.init()
else:
ws_client_graphql_ws.init_as_admin()
query = """
subscription {
hge_tests_test_t1(order_by: {c1: desc}, limit: 1) {
c1,
c2
}
}
"""
obj = {
'id': '1',
'payload': {
'query': query
},
'type': 'subscribe'
}
ws_client_graphql_ws.send(obj)
ev = ws_client_graphql_ws.get_ws_query_event('1',15)
assert ev['type'] == 'next' and ev['id'] == '1', ev
@pytest.mark.skip(reason="refer https://github.com/hasura/graphql-engine/pull/387#issuecomment-421343098")
def test_start_duplicate(self, hge_ctx, ws_client_graphql_ws):
if ws_client_graphql_ws.get_conn_close_state():
ws_client_graphql_ws.create_conn()
if hge_ctx.hge_key == None:
ws_client_graphql_ws.init()
else:
ws_client_graphql_ws.init_as_admin()
self.test_start(ws_client_graphql_ws)
def test_stop_without_id(self, hge_ctx, ws_client_graphql_ws):
if ws_client_graphql_ws.get_conn_close_state():
ws_client_graphql_ws.create_conn()
if hge_ctx.hge_key == None:
ws_client_graphql_ws.init()
else:
ws_client_graphql_ws.init_as_admin()
obj = {
'type': 'complete'
}
ws_client_graphql_ws.send(obj)
time.sleep(2)
ev = ws_client_graphql_ws.get_conn_close_state()
assert ev == True, ev
def test_stop(self, hge_ctx, ws_client_graphql_ws):
if ws_client_graphql_ws.get_conn_close_state():
ws_client_graphql_ws.create_conn()
if hge_ctx.hge_key == None:
ws_client_graphql_ws.init()
else:
ws_client_graphql_ws.init_as_admin()
obj = {
'type': 'complete',
'id': '1'
}
ws_client_graphql_ws.send(obj)
time.sleep(2)
with pytest.raises(queue.Empty):
ev = ws_client_graphql_ws.get_ws_event(3)
def test_start_after_stop(self, hge_ctx, ws_client_graphql_ws):
if ws_client_graphql_ws.get_conn_close_state():
ws_client_graphql_ws.create_conn()
if hge_ctx.hge_key == None:
ws_client_graphql_ws.init()
else:
ws_client_graphql_ws.init_as_admin()
self.test_start(hge_ctx, ws_client_graphql_ws)
## NOTE: test_start leaves a message in the queue, hence clearing it
if len(ws_client_graphql_ws.get_queue()) > 0:
ws_client_graphql_ws.clear_queue()
self.test_stop(hge_ctx, ws_client_graphql_ws)
def test_complete(self, hge_ctx, ws_client_graphql_ws):
if ws_client_graphql_ws.get_conn_close_state():
ws_client_graphql_ws.create_conn()
if hge_ctx.hge_key == None:
ws_client_graphql_ws.init()
else:
ws_client_graphql_ws.init_as_admin()
query = """
query {
hge_tests_test_t1(order_by: {c1: desc}, limit: 1) {
c1,
c2
}
}
"""
obj = {
'id': '2',
'payload': {
'query': query
},
'type': 'subscribe'
}
ws_client_graphql_ws.send(obj)
ev = ws_client_graphql_ws.get_ws_query_event('2',3)
assert ev['type'] == 'next' and ev['id'] == '2', ev
# Check for complete type
ev = ws_client_graphql_ws.get_ws_query_event('2',3)
assert ev['type'] == 'complete' and ev['id'] == '2', ev
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@usefixtures('per_method_tests_db_state','ws_conn_init')
class TestSubscriptionLiveQueries:
@classmethod
def dir(cls):
return 'queries/subscriptions/live_queries'
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_live_queries(self, hge_ctx, ws_client):
'''
Create connection using connection_init
'''
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
ws_client.init_as_admin()
with open(self.dir() + "/steps.yaml") as c:
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
conf = yaml.safe_load(c)
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
queryTmplt = """
subscription ($result_limit: Int!) {
hge_tests_live_query_{0}: hge_tests_test_t2(order_by: {c1: asc}, limit: $result_limit) {
c1,
c2
}
}
"""
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
queries = [(0, 1), (1, 2), (2, 2)]
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
liveQs = []
for i, resultLimit in queries:
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
query = queryTmplt.replace('{0}',str(i))
headers={}
if hge_ctx.hge_key is not None:
headers['X-Hasura-Admin-Secret'] = hge_ctx.hge_key
subscrPayload = { 'query': query, 'variables': { 'result_limit': resultLimit } }
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
respLive = ws_client.send_query(subscrPayload, query_id='live_'+str(i), headers=headers, timeout=15)
liveQs.append(respLive)
ev = next(respLive)
assert ev['type'] == 'data', ev
assert ev['id'] == 'live_' + str(i), ev
assert ev['payload']['data'] == {'hge_tests_live_query_'+str(i): []}, ev['payload']['data']
assert isinstance(conf, list) == True, 'Not an list'
for index, step in enumerate(conf):
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
mutationPayload = { 'query': step['query'] }
if 'variables' in step and step['variables']:
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
mutationPayload['variables'] = json.loads(step['variables'])
expected_resp = json.loads(step['response'])
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
mutResp = ws_client.send_query(mutationPayload,'mutation_'+str(index),timeout=15)
ev = next(mutResp)
assert ev['type'] == 'data' and ev['id'] == 'mutation_'+str(index), ev
assert ev['payload']['data'] == expected_resp, ev['payload']['data']
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
ev = next(mutResp)
assert ev['type'] == 'complete' and ev['id'] == 'mutation_'+str(index), ev
for (i, resultLimit), respLive in zip(queries, liveQs):
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
ev = next(respLive)
assert ev['type'] == 'data', ev
assert ev['id'] == 'live_' + str(i), ev
expectedReturnedResponse = []
if 'live_response' in step:
expectedReturnedResponse = json.loads(step['live_response'])
elif 'returning' in expected_resp[step['name']]:
expectedReturnedResponse = expected_resp[step['name']]['returning']
expectedLimitedResponse = expectedReturnedResponse[:resultLimit]
expectedLiveResponse = { 'hge_tests_live_query_'+str(i): expectedLimitedResponse }
assert ev['payload']['data'] == expectedLiveResponse, ev['payload']['data']
for i, _ in queries:
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
# stop live operation
frame = {
'id': 'live_'+str(i),
'type': 'stop'
}
ws_client.send(frame)
2018-09-18 09:21:57 +03:00
with pytest.raises(queue.Empty):
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
ev = ws_client.get_ws_event(3)
@usefixtures('per_method_tests_db_state','ws_conn_init_graphql_ws')
class TestSubscriptionLiveQueriesForGraphQLWS:
@classmethod
def dir(cls):
return 'queries/subscriptions/live_queries'
def test_live_queries(self, hge_ctx, ws_client_graphql_ws):
'''
Create connection using connection_init
'''
ws_client_graphql_ws.init_as_admin()
with open(self.dir() + "/steps.yaml") as c:
conf = yaml.safe_load(c)
queryTmplt = """
subscription ($result_limit: Int!) {
hge_tests_live_query_{0}: hge_tests_test_t2(order_by: {c1: asc}, limit: $result_limit) {
c1,
c2
}
}
"""
queries = [(0, 1), (1, 2), (2, 2)]
liveQs = []
for i, resultLimit in queries:
query = queryTmplt.replace('{0}',str(i))
headers={}
if hge_ctx.hge_key is not None:
headers['X-Hasura-Admin-Secret'] = hge_ctx.hge_key
subscrPayload = { 'query': query, 'variables': { 'result_limit': resultLimit } }
respLive = ws_client_graphql_ws.send_query(subscrPayload, query_id='live_'+str(i), headers=headers, timeout=15)
liveQs.append(respLive)
ev = next(respLive)
assert ev['type'] == 'next', ev
assert ev['id'] == 'live_' + str(i), ev
assert ev['payload']['data'] == {'hge_tests_live_query_'+str(i): []}, ev['payload']['data']
assert isinstance(conf, list) == True, 'Not an list'
for index, step in enumerate(conf):
mutationPayload = { 'query': step['query'] }
if 'variables' in step and step['variables']:
mutationPayload['variables'] = json.loads(step['variables'])
expected_resp = json.loads(step['response'])
mutResp = ws_client_graphql_ws.send_query(mutationPayload,'mutation_'+str(index),timeout=15)
ev = next(mutResp)
assert ev['type'] == 'next' and ev['id'] == 'mutation_'+str(index), ev
assert ev['payload']['data'] == expected_resp, ev['payload']['data']
ev = next(mutResp)
assert ev['type'] == 'complete' and ev['id'] == 'mutation_'+str(index), ev
for (i, resultLimit), respLive in zip(queries, liveQs):
ev = next(respLive)
assert ev['type'] == 'next', ev
assert ev['id'] == 'live_' + str(i), ev
expectedReturnedResponse = []
if 'live_response' in step:
expectedReturnedResponse = json.loads(step['live_response'])
elif 'returning' in expected_resp[step['name']]:
expectedReturnedResponse = expected_resp[step['name']]['returning']
expectedLimitedResponse = expectedReturnedResponse[:resultLimit]
expectedLiveResponse = { 'hge_tests_live_query_'+str(i): expectedLimitedResponse }
assert ev['payload']['data'] == expectedLiveResponse, ev['payload']['data']
for i, _ in queries:
# stop live operation
frame = {
'id': 'live_'+str(i),
'type': 'complete'
}
ws_client_graphql_ws.send(frame)
ws_client_graphql_ws.clear_queue()
@pytest.mark.parametrize("backend", ['mssql', 'postgres'])
@usefixtures('per_class_tests_db_state')
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
class TestSubscriptionMultiplexing:
@classmethod
def dir(cls):
return 'queries/subscriptions/multiplexing'
def test_extraneous_session_variables_are_discarded_from_query(self, hge_ctx):
with open(self.dir() + '/articles_query.yaml') as c:
config = yaml.safe_load(c)
query = config['query']
session_variables = {
"X-Hasura-Role":"public",
"X-Hasura-User-Id":"1" # extraneous session variable
}
response = self.get_explain_graphql_query_response(hge_ctx, query, {}, session_variables)
# The input session variables should be ignored because the only check for the role is
# if `is_public` is `true`
assert response["variables"]["session"] == {}, response["variables"]
session_variables = {
"X-Hasura-Role":"user",
"X-Hasura-User-Id":"1",
"X-Hasura-Allowed-Ids":"{1,3,4}" # extraneous session variable
}
response = self.get_explain_graphql_query_response(hge_ctx, query, {}, session_variables)
# The input session variable should not be ignored because the `user` role can only
# select those roles where `user_id = X-Hasura-User-Id`
assert response["variables"]["session"] == {'x-hasura-user-id':"1"}, response["variables"]
def get_explain_graphql_query_response(self, hge_ctx, query, variables, user_headers = {}):
admin_secret = hge_ctx.hge_key
headers = {}
if admin_secret is not None:
headers['X-Hasura-Admin-Secret'] = admin_secret
request = { 'query': { 'query': query, 'variables': variables }, 'user': user_headers }
status_code, response, _ = hge_ctx.anyq('/v1/graphql/explain', request, headers)
assert status_code == 200, (request, status_code, response)
return response
@pytest.mark.parametrize("backend", ['postgres'])
@usefixtures('per_class_tests_db_state', 'ws_conn_init')
class TestSubscriptionUDFWithSessionArg:
"""
Test a user-defined function which uses the entire session variables as argument
"""
query = """
subscription {
me {
id
name
}
}
"""
@classmethod
def dir(cls):
return 'queries/subscriptions/udf_session_args'
def test_user_defined_function_with_session_argument(self, hge_ctx, ws_client):
ws_client.init_as_admin()
headers = {'x-hasura-role': 'user', 'x-hasura-user-id': '42'}
if hge_ctx.hge_key is not None:
headers['X-Hasura-Admin-Secret'] = hge_ctx.hge_key
payload = {'query': self.query}
resp = ws_client.send_query(payload, headers=headers, timeout=15)
ev = next(resp)
assert ev['type'] == 'data', ev
assert ev['payload']['data'] == {'me': [{'id': '42', 'name': 'Charlie'}]}, ev['payload']['data']