graphql-engine/server/tests-py/test_events.py

761 lines
27 KiB
Python
Raw Normal View History

2018-09-18 09:21:57 +03:00
#!/usr/bin/env python3
import pytest
import queue
import time
import utils
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
from validate import check_query_f, check_event
usefixtures = pytest.mark.usefixtures
# Every test in this class requires the events webhook to be running first
# We are also going to mark as server upgrade tests are allowed
# A few tests are going to be excluded with skip_server_upgrade_test mark
pytestmark = [usefixtures('evts_webhook'), pytest.mark.allow_server_upgrade_test]
2018-10-30 12:21:58 +03:00
def select_last_event_fromdb(hge_ctx):
q = {
"type": "select",
"args": {
"table": {"schema": "hdb_catalog", "name": "event_log"},
"columns": ["*"],
"order_by": ["-created_at"],
"limit": 1
}
}
st_code, resp = hge_ctx.v1q(q)
return st_code, resp
2018-10-30 12:21:58 +03:00
def insert(hge_ctx, table, row, returning=[], headers = {}):
return insert_many(hge_ctx, table, [row], returning, headers)
def insert_many(hge_ctx, table, rows, returning=[], headers = {}):
q = {
"type": "insert",
"args": {
"table": table,
"objects": rows,
"returning": returning
}
}
st_code, resp = hge_ctx.v1q(q, headers = headers)
return st_code, resp
2018-10-30 12:21:58 +03:00
def update(hge_ctx, table, where_exp, set_exp, headers = {}):
q = {
"type": "update",
"args": {
"table": table,
"where": where_exp,
"$set": set_exp
}
}
st_code, resp = hge_ctx.v1q(q, headers = headers)
return st_code, resp
2018-10-30 12:21:58 +03:00
def delete(hge_ctx, table, where_exp, headers = {}):
q = {
"type": "delete",
"args": {
"table": table,
"where": where_exp
}
}
st_code, resp = hge_ctx.v1q(q, headers = headers)
return st_code, resp
2018-09-18 09:21:57 +03:00
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@usefixtures("per_method_tests_db_state")
class TestCreateAndDelete:
def test_create_delete(self, hge_ctx):
check_query_f(hge_ctx, self.dir() + "/create_and_delete.yaml")
def test_create_reset(self, hge_ctx):
check_query_f(hge_ctx, self.dir() + "/create_and_reset.yaml")
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
# Can't run server upgrade tests, as this test has a schema change
@pytest.mark.skip_server_upgrade_test
def test_create_operation_spec_not_provider_err(self, hge_ctx):
check_query_f(hge_ctx, self.dir() + "/create_trigger_operation_specs_not_provided_err.yaml")
@classmethod
def dir(cls):
return 'queries/event_triggers/create-delete'
# Generates a backlog of events, then:
# - checks that we're processing with the concurrency and backpressure
# characteristics we expect
# - ensures all events are successfully processed
#
# NOTE: this expects:
# HASURA_GRAPHQL_EVENTS_HTTP_POOL_SIZE=8
# HASURA_GRAPHQL_EVENTS_FETCH_BATCH_SIZE=100 (the default)
@usefixtures("per_method_tests_db_state")
class TestEventFlood(object):
@classmethod
def dir(cls):
return 'queries/event_triggers/flood'
def test_flood(self, hge_ctx, evts_webhook):
table = {"schema": "hge_tests", "name": "test_flood"}
# Trigger a bunch of events; hasura will begin processing but block on /block
payload = range(1,1001)
rows = list(map(lambda x: {"c1": x, "c2": "hello"}, payload))
st_code, resp = insert_many(hge_ctx, table, rows)
assert st_code == 200, resp
def check_backpressure():
# Expect that HASURA_GRAPHQL_EVENTS_HTTP_POOL_SIZE webhooks are pending:
assert evts_webhook.blocked_count == 8
# ...Great, so presumably:
# - event handlers are run concurrently
# - with concurrency limited by HASURA_GRAPHQL_EVENTS_HTTP_POOL_SIZE
locked_counts = {
"type":"run_sql",
"args":{
"sql":'''
select
(select count(*) from hdb_catalog.event_log where locked IS NOT NULL) as num_locked,
count(*) as total
from hdb_catalog.event_log
where table_name = 'test_flood'
'''
}
}
st, resp = hge_ctx.v1q(locked_counts)
assert st == 200, resp
# Make sure we have 2*HASURA_GRAPHQL_EVENTS_FETCH_BATCH_SIZE events checked out:
# - 100 prefetched
# - 100 being processed right now (but blocked on HTTP_POOL capacity)
assert resp['result'][1] == ['200', '1000']
# Rather than sleep arbitrarily, loop until assertions pass:
utils.until_asserts_pass(30, check_backpressure)
# ...then make sure we're truly stable:
time.sleep(3)
check_backpressure()
# unblock open and future requests to /block; check all events processed
evts_webhook.unblock()
def get_evt():
# TODO ThreadedHTTPServer helps locally (I only need a timeout of
# 10 here), but we still need a bit of a long timeout here for CI
# it seems, since webhook can't keep up there:
ev_full = evts_webhook.get_event(600)
return ev_full['body']['event']['data']['new']['c1']
# Make sure we got all payloads (probably out of order):
ns = list(map(lambda _: get_evt(), payload))
ns.sort()
assert ns == list(payload)
@usefixtures("per_class_tests_db_state")
class TestCreateEvtQuery(object):
2018-09-18 09:21:57 +03:00
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@classmethod
def dir(cls):
return 'queries/event_triggers/basic'
2018-09-18 09:21:57 +03:00
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_basic(self, hge_ctx, evts_webhook):
2018-10-30 12:21:58 +03:00
table = {"schema": "hge_tests", "name": "test_t1"}
2018-09-18 09:21:57 +03:00
2018-10-30 12:21:58 +03:00
init_row = {"c1": 1, "c2": "hello"}
2018-09-18 09:21:57 +03:00
exp_ev_data = {
"old": None,
"new": init_row
}
st_code, resp = insert(hge_ctx, table, init_row)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_all", table, "INSERT", exp_ev_data)
2018-09-18 09:21:57 +03:00
where_exp = {"c1": 1}
2018-10-30 12:21:58 +03:00
set_exp = {"c2": "world"}
2018-09-18 09:21:57 +03:00
exp_ev_data = {
"old": init_row,
2018-10-30 12:21:58 +03:00
"new": {"c1": 1, "c2": "world"}
2018-09-18 09:21:57 +03:00
}
st_code, resp = update(hge_ctx, table, where_exp, set_exp)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_all", table, "UPDATE", exp_ev_data)
2018-09-18 09:21:57 +03:00
exp_ev_data = {
2018-10-30 12:21:58 +03:00
"old": {"c1": 1, "c2": "world"},
2018-09-18 09:21:57 +03:00
"new": None
}
st_code, resp = delete(hge_ctx, table, where_exp)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_all", table, "DELETE", exp_ev_data)
2018-09-18 09:21:57 +03:00
def test_partitioned_table_basic_insert(self, hge_ctx, evts_webhook):
if hge_ctx.pg_version < 110000:
pytest.skip('Event triggers on partioned tables are not supported in Postgres versions < 11')
return
st_code, resp = hge_ctx.v1q_f(self.dir() + '/partition_table_setup.yaml')
assert st_code == 200, resp
table = { "schema":"hge_tests", "name": "measurement"}
init_row = { "city_id": 1, "logdate": "2006-02-02", "peaktemp": 1, "unitsales": 1}
exp_ev_data = {
"old": None,
"new": init_row
}
st_code, resp = insert(hge_ctx, table, init_row)
assert st_code == 200, resp
check_event(hge_ctx, evts_webhook, "measurement_all", table, "INSERT", exp_ev_data)
st_code, resp = hge_ctx.v1q_f(self.dir() + '/partition_table_teardown.yaml')
assert st_code == 200, resp
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@usefixtures('per_method_tests_db_state')
class TestRetryConf(object):
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@classmethod
def dir(cls):
return 'queries/event_triggers/retry_conf'
# webhook: http://127.0.0.1:5592/fail
# retry_conf:
# num_retries: 4
# interval_sec: 1
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_basic(self, hge_ctx, evts_webhook):
2018-10-30 12:21:58 +03:00
table = {"schema": "hge_tests", "name": "test_t1"}
2018-10-30 12:21:58 +03:00
init_row = {"c1": 1, "c2": "hello"}
exp_ev_data = {
"old": None,
"new": init_row
}
st_code, resp = insert(hge_ctx, table, init_row)
assert st_code == 200, resp
check_event(hge_ctx, evts_webhook, "t1_retry", table, "INSERT", exp_ev_data, webhook_path = "/fail", retry = 0)
check_event(hge_ctx, evts_webhook, "t1_retry", table, "INSERT", exp_ev_data, webhook_path = "/fail", retry = 1)
check_event(hge_ctx, evts_webhook, "t1_retry", table, "INSERT", exp_ev_data, webhook_path = "/fail", retry = 2)
check_event(hge_ctx, evts_webhook, "t1_retry", table, "INSERT", exp_ev_data, webhook_path = "/fail", retry = 3)
check_event(hge_ctx, evts_webhook, "t1_retry", table, "INSERT", exp_ev_data, webhook_path = "/fail", retry = 4)
# webhook: http://127.0.0.1:5592/sleep_2s
# retry_conf:
# num_retries: 2
# interval_sec: 1
# timeout_sec: 1
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_timeout_short(self, hge_ctx, evts_webhook):
table = {"schema": "hge_tests", "name": "test_t2"}
init_row = {"c1": 1, "c2": "hello"}
exp_ev_data = {
"old": None,
"new": init_row
}
st_code, resp = insert(hge_ctx, table, init_row)
assert st_code == 200, resp
check_event(hge_ctx, evts_webhook, "t2_timeout_short", table, "INSERT", exp_ev_data, webhook_path = "/sleep_2s", retry = 0, get_timeout = 5)
check_event(hge_ctx, evts_webhook, "t2_timeout_short", table, "INSERT", exp_ev_data, webhook_path = "/sleep_2s", retry = 1, get_timeout = 5)
check_event(hge_ctx, evts_webhook, "t2_timeout_short", table, "INSERT", exp_ev_data, webhook_path = "/sleep_2s", retry = 2, get_timeout = 5)
# webhook: http://127.0.0.1:5592/sleep_2s
# retry_conf:
# num_retries: 0
# interval_sec: 2
# timeout_sec: 10
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_timeout_long(self, hge_ctx, evts_webhook):
table = {"schema": "hge_tests", "name": "test_t3"}
init_row = {"c1": 1, "c2": "hello"}
exp_ev_data = {
"old": None,
"new": init_row
}
st_code, resp = insert(hge_ctx, table, init_row)
assert st_code == 200, resp
time.sleep(2)
check_event(hge_ctx, evts_webhook, "t3_timeout_long", table, "INSERT", exp_ev_data, webhook_path = "/sleep_2s")
# Keep this one last
def test_queue_empty(self, hge_ctx, evts_webhook):
try:
evts_webhook.get_event(3)
assert False, "expected queue to be empty"
except queue.Empty:
pass
2018-10-30 12:21:58 +03:00
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@usefixtures('per_method_tests_db_state')
class TestEvtHeaders(object):
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@classmethod
def dir(cls):
return 'queries/event_triggers/headers'
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_basic(self, hge_ctx, evts_webhook):
2018-10-30 12:21:58 +03:00
table = {"schema": "hge_tests", "name": "test_t1"}
2018-10-30 12:21:58 +03:00
init_row = {"c1": 1, "c2": "hello"}
exp_ev_data = {
"old": None,
"new": init_row
}
headers = {"X-Header-From-Value": "MyValue", "X-Header-From-Env": "MyEnvValue"}
st_code, resp = insert(hge_ctx, table, init_row)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_all", table, "INSERT", exp_ev_data, headers = headers)
class TestUpdateEvtQuery(object):
@pytest.fixture(autouse=True)
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def transact(self, request, hge_ctx, evts_webhook):
2018-10-30 12:21:58 +03:00
print("In setup method")
# Adds trigger on 'test_t1' with...
# insert:
# columns: '*'
# update:
# columns: [c2, c3]
st_code, resp = hge_ctx.v1q_f('queries/event_triggers/update_query/create-setup.yaml')
assert st_code == 200, resp
# overwrites trigger added above, with...
# delete:
# columns: "*"
# update:
# columns: ["c1", "c3"]
st_code, resp = hge_ctx.v1q_f('queries/event_triggers/update_query/update-setup.yaml')
assert st_code == 200, '{}'.format(resp)
assert resp[1]["sources"][0]["tables"][0]["event_triggers"][0]["webhook"] == 'http://127.0.0.1:5592/new'
yield
st_code, resp = hge_ctx.v1q_f('queries/event_triggers/update_query/teardown.yaml')
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_update_basic(self, hge_ctx, evts_webhook):
2018-10-30 12:21:58 +03:00
table = {"schema": "hge_tests", "name": "test_t1"}
# Expect that inserting a row (which would have triggered in original
# create_event_trigger) does not trigger
init_row = {"c1": 1, "c2": "hello", "c3": {"name": "clarke"}}
st_code, resp = insert(hge_ctx, table, init_row)
assert st_code == 200, resp
with pytest.raises(queue.Empty):
check_event(hge_ctx, evts_webhook, "t1_cols", table, "INSERT", {}, webhook_path = "/new", get_timeout = 0)
# Likewise for an update on c2:
where_exp = {"c1": 1}
2018-10-30 12:21:58 +03:00
set_exp = {"c2": "world"}
st_code, resp = update(hge_ctx, table, where_exp, set_exp)
assert st_code == 200, resp
with pytest.raises(queue.Empty):
check_event(hge_ctx, evts_webhook, "t1_cols", table, "UPDATE", {}, webhook_path = "/new", get_timeout = 0)
where_exp = {"c1": 1}
set_exp = {"c3": {"name": "bellamy"}}
exp_ev_data = {
"old": {"c1": 1, "c2": "world", "c3": {"name": "clarke"}},
"new": {"c1": 1, "c2": "world", "c3": {"name": "bellamy"}}
}
st_code, resp = update(hge_ctx, table, where_exp, set_exp)
assert st_code == 200, resp
check_event(hge_ctx, evts_webhook, "t1_cols", table, "UPDATE", exp_ev_data, webhook_path ="/new")
where_exp = {"c1": 1}
2018-10-30 12:21:58 +03:00
set_exp = {"c1": 2}
exp_ev_data = {
"old": {"c1": 1, "c2": "world", "c3": {"name": "bellamy"}},
"new": {"c1": 2, "c2": "world", "c3": {"name": "bellamy"}}
}
st_code, resp = update(hge_ctx, table, where_exp, set_exp)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_cols", table, "UPDATE", exp_ev_data, webhook_path ="/new")
where_exp = {"c1": 2}
exp_ev_data = {
"old": {"c1": 2, "c2": "world", "c3": {"name": "bellamy"}},
"new": None
}
st_code, resp = delete(hge_ctx, table, where_exp)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_cols", table, "DELETE", exp_ev_data, webhook_path = "/new")
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@usefixtures('per_method_tests_db_state')
class TestDeleteEvtQuery(object):
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
directory = 'queries/event_triggers'
setup_files = [
directory + '/basic/setup.yaml',
directory + '/delete_query/setup.yaml'
]
teardown_files = [ directory + '/delete_query/teardown.yaml']
# Ensure deleting an event trigger works
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_delete_basic(self, hge_ctx, evts_webhook):
2018-10-30 12:21:58 +03:00
table = {"schema": "hge_tests", "name": "test_t1"}
2018-10-30 12:21:58 +03:00
init_row = {"c1": 1, "c2": "hello"}
exp_ev_data = {
"old": None,
"new": init_row
}
st_code, resp = insert(hge_ctx, table, init_row)
assert st_code == 200, resp
with pytest.raises(queue.Empty):
check_event(hge_ctx, evts_webhook, "t1_all", table, "INSERT", exp_ev_data, get_timeout=0)
where_exp = {"c1": 1}
2018-10-30 12:21:58 +03:00
set_exp = {"c2": "world"}
exp_ev_data = {
"old": init_row,
2018-10-30 12:21:58 +03:00
"new": {"c1": 1, "c2": "world"}
}
st_code, resp = update(hge_ctx, table, where_exp, set_exp)
assert st_code == 200, resp
with pytest.raises(queue.Empty):
check_event(hge_ctx, evts_webhook, "t1_all", table, "UPDATE", exp_ev_data, get_timeout=0)
exp_ev_data = {
2018-10-30 12:21:58 +03:00
"old": {"c1": 1, "c2": "world"},
"new": None
}
st_code, resp = delete(hge_ctx, table, where_exp)
assert st_code == 200, resp
with pytest.raises(queue.Empty):
# NOTE: use a bit of a delay here, to catch any stray events generated above
check_event(hge_ctx, evts_webhook, "t1_all", table, "DELETE", exp_ev_data, get_timeout=2)
2018-09-18 09:21:57 +03:00
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@usefixtures('per_class_tests_db_state')
2018-09-18 09:21:57 +03:00
class TestEvtSelCols:
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@classmethod
def dir(cls):
return 'queries/event_triggers/selected_cols'
2018-09-18 09:21:57 +03:00
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_selected_cols(self, hge_ctx, evts_webhook):
2018-10-30 12:21:58 +03:00
table = {"schema": "hge_tests", "name": "test_t1"}
2018-09-18 09:21:57 +03:00
2018-10-30 12:21:58 +03:00
init_row = {"c1": 1, "c2": "hello"}
2018-09-18 09:21:57 +03:00
exp_ev_data = {
"old": None,
"new": {"c1": 1, "c2": "hello"}
2018-09-18 09:21:57 +03:00
}
st_code, resp = insert(hge_ctx, table, init_row)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_cols", table, "INSERT", exp_ev_data)
2018-09-18 09:21:57 +03:00
where_exp = {"c1": 1}
2018-10-30 12:21:58 +03:00
set_exp = {"c2": "world"}
# expected no event hence previous expected data
st_code, resp = update(hge_ctx, table, where_exp, set_exp)
assert st_code == 200, resp
with pytest.raises(queue.Empty):
check_event(hge_ctx, evts_webhook, "t1_cols", table, "UPDATE", exp_ev_data, get_timeout=0)
where_exp = {"c1": 1}
2018-10-30 12:21:58 +03:00
set_exp = {"c1": 2}
2018-09-18 09:21:57 +03:00
exp_ev_data = {
2018-10-30 12:21:58 +03:00
"old": {"c1": 1, "c2": "world"},
"new": {"c1": 2, "c2": "world"}
2018-09-18 09:21:57 +03:00
}
st_code, resp = update(hge_ctx, table, where_exp, set_exp)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_cols", table, "UPDATE", exp_ev_data)
2018-09-18 09:21:57 +03:00
where_exp = {"c1": 2}
2018-09-18 09:21:57 +03:00
exp_ev_data = {
2018-10-30 12:21:58 +03:00
"old": {"c1": 2, "c2": "world"},
2018-09-18 09:21:57 +03:00
"new": None
}
st_code, resp = delete(hge_ctx, table, where_exp)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_cols", table, "DELETE", exp_ev_data)
2018-09-18 09:21:57 +03:00
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@pytest.mark.skip_server_upgrade_test
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_selected_cols_dep(self, hge_ctx, evts_webhook):
2018-09-18 09:21:57 +03:00
st_code, resp = hge_ctx.v1q({
"type": "run_sql",
"args": {
"sql": "alter table hge_tests.test_t1 drop column c1"
}
})
assert st_code == 400, resp
assert resp['code'] == "dependency-error", resp
st_code, resp = hge_ctx.v1q({
"type": "run_sql",
"args": {
"sql": "alter table hge_tests.test_t1 drop column c2"
}
})
assert st_code == 200, resp
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@usefixtures('per_method_tests_db_state')
class TestEvtInsertOnly:
2018-09-18 09:21:57 +03:00
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@classmethod
def dir(cls):
return 'queries/event_triggers/insert_only'
2018-09-18 09:21:57 +03:00
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_insert_only(self, hge_ctx, evts_webhook):
2018-10-30 12:21:58 +03:00
table = {"schema": "hge_tests", "name": "test_t1"}
2018-09-18 09:21:57 +03:00
2018-10-30 12:21:58 +03:00
init_row = {"c1": 1, "c2": "hello"}
2018-09-18 09:21:57 +03:00
exp_ev_data = {
"old": None,
"new": init_row
2018-09-18 09:21:57 +03:00
}
st_code, resp = insert(hge_ctx, table, init_row)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_insert", table, "INSERT", exp_ev_data)
2018-09-18 09:21:57 +03:00
where_exp = {"c1": 1}
2018-10-30 12:21:58 +03:00
set_exp = {"c2": "world"}
2018-09-18 09:21:57 +03:00
exp_ev_data = {
"old": init_row,
2018-10-30 12:21:58 +03:00
"new": {"c1": 1, "c2": "world"}
2018-09-18 09:21:57 +03:00
}
st_code, resp = update(hge_ctx, table, where_exp, set_exp)
assert st_code == 200, resp
with pytest.raises(queue.Empty):
check_event(hge_ctx, evts_webhook, "t1_insert", table, "UPDATE", exp_ev_data, get_timeout=0)
2018-09-18 09:21:57 +03:00
exp_ev_data = {
2018-10-30 12:21:58 +03:00
"old": {"c1": 1, "c2": "world"},
2018-09-18 09:21:57 +03:00
"new": None
}
st_code, resp = delete(hge_ctx, table, where_exp)
assert st_code == 200, resp
with pytest.raises(queue.Empty):
# NOTE: use a bit of a delay here, to catch any stray events generated above
check_event(hge_ctx, evts_webhook, "t1_insert", table, "DELETE", exp_ev_data, get_timeout=2)
2018-09-18 09:21:57 +03:00
2018-10-30 12:21:58 +03:00
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@usefixtures('per_class_tests_db_state')
class TestEvtSelPayload:
2018-09-18 09:21:57 +03:00
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@classmethod
def dir(cls):
return 'queries/event_triggers/selected_payload'
2018-09-18 09:21:57 +03:00
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_selected_payload(self, hge_ctx, evts_webhook):
2018-10-30 12:21:58 +03:00
table = {"schema": "hge_tests", "name": "test_t1"}
2018-09-18 09:21:57 +03:00
2018-10-30 12:21:58 +03:00
init_row = {"c1": 1, "c2": "hello"}
2018-09-18 09:21:57 +03:00
exp_ev_data = {
"old": None,
"new": {"c1": 1, "c2": "hello"}
2018-09-18 09:21:57 +03:00
}
st_code, resp = insert(hge_ctx, table, init_row)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_payload", table, "INSERT", exp_ev_data)
2018-09-18 09:21:57 +03:00
where_exp = {"c1": 1}
2018-10-30 12:21:58 +03:00
set_exp = {"c2": "world"}
2018-09-18 09:21:57 +03:00
exp_ev_data = {
"old": {"c1": 1},
"new": {"c1": 1}
2018-09-18 09:21:57 +03:00
}
st_code, resp = update(hge_ctx, table, where_exp, set_exp)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_payload", table, "UPDATE", exp_ev_data)
2018-09-18 09:21:57 +03:00
where_exp = {"c1": 1}
2018-10-30 12:21:58 +03:00
set_exp = {"c1": 2}
2018-09-18 09:21:57 +03:00
exp_ev_data = {
"old": {"c1": 1},
"new": {"c1": 2}
}
st_code, resp = update(hge_ctx, table, where_exp, set_exp)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_payload", table, "UPDATE", exp_ev_data)
where_exp = {"c1": 2}
exp_ev_data = {
2018-10-30 12:21:58 +03:00
"old": {"c2": "world"},
2018-09-18 09:21:57 +03:00
"new": None
}
st_code, resp = delete(hge_ctx, table, where_exp)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_payload", table, "DELETE", exp_ev_data)
2018-09-18 09:21:57 +03:00
def test_selected_payload_dep(self, hge_ctx):
st_code, resp = hge_ctx.v1q({
"type": "run_sql",
"args": {
"sql": "alter table hge_tests.test_t1 drop column c1"
}
})
assert st_code == 400, resp
assert resp['code'] == "dependency-error", resp
st_code, resp = hge_ctx.v1q({
"type": "run_sql",
"args": {
"sql": "alter table hge_tests.test_t1 drop column c2"
}
})
assert st_code == 400, resp
assert resp['code'] == "dependency-error", resp
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@usefixtures('per_method_tests_db_state')
class TestWebhookEnv(object):
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@classmethod
def dir(cls):
return 'queries/event_triggers/webhook_env'
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_basic(self, hge_ctx, evts_webhook):
table = {"schema": "hge_tests", "name": "test_t1"}
init_row = {"c1": 1, "c2": "hello"}
exp_ev_data = {
"old": None,
"new": init_row
}
st_code, resp = insert(hge_ctx, table, init_row)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_all", table, "INSERT", exp_ev_data)
where_exp = {"c1": 1}
set_exp = {"c2": "world"}
exp_ev_data = {
"old": init_row,
"new": {"c1": 1, "c2": "world"}
}
st_code, resp = update(hge_ctx, table, where_exp, set_exp)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_all", table, "UPDATE", exp_ev_data)
exp_ev_data = {
"old": {"c1": 1, "c2": "world"},
"new": None
}
st_code, resp = delete(hge_ctx, table, where_exp)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_all", table, "DELETE", exp_ev_data)
@usefixtures('per_method_tests_db_state')
class TestWebhookTemplateURL(object):
@classmethod
def dir(cls):
return 'queries/event_triggers/webhook_template_url'
def test_basic(self, hge_ctx, evts_webhook):
table = {"schema": "hge_tests", "name": "test_t1"}
init_row = {"c1": 1, "c2": "hello"}
exp_ev_data = {
"old": None,
"new": init_row
}
st_code, resp = insert(hge_ctx, table, init_row)
assert st_code == 200, resp
check_event(hge_ctx, evts_webhook, "t1_all", table, "INSERT", exp_ev_data, webhook_path = '/trigger')
where_exp = {"c1": 1}
set_exp = {"c2": "world"}
exp_ev_data = {
"old": init_row,
"new": {"c1": 1, "c2": "world"}
}
st_code, resp = update(hge_ctx, table, where_exp, set_exp)
assert st_code == 200, resp
check_event(hge_ctx, evts_webhook, "t1_all", table, "UPDATE", exp_ev_data, webhook_path = '/trigger')
exp_ev_data = {
"old": {"c1": 1, "c2": "world"},
"new": None
}
st_code, resp = delete(hge_ctx, table, where_exp)
assert st_code == 200, resp
check_event(hge_ctx, evts_webhook, "t1_all", table, "DELETE", exp_ev_data, webhook_path = '/trigger')
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@usefixtures('per_method_tests_db_state')
class TestSessionVariables(object):
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@classmethod
def dir(cls):
return 'queries/event_triggers/basic'
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
def test_basic(self, hge_ctx, evts_webhook):
table = {"schema": "hge_tests", "name": "test_t1"}
init_row = {"c1": 1, "c2": "hello"}
exp_ev_data = {
"old": None,
"new": init_row
}
session_variables = { 'x-hasura-role': 'admin', 'x-hasura-allowed-roles': "['admin','user']", 'x-hasura-user-id': '1'}
st_code, resp = insert(hge_ctx, table, init_row, headers = session_variables)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_all", table, "INSERT", exp_ev_data, session_variables = session_variables)
where_exp = {"c1": 1}
set_exp = {"c2": "world"}
exp_ev_data = {
"old": init_row,
"new": {"c1": 1, "c2": "world"}
}
session_variables = { 'x-hasura-role': 'admin', 'x-hasura-random': 'some_random_info', 'X-Random-Header': 'not_session_variable'}
st_code, resp = update(hge_ctx, table, where_exp, set_exp, headers = session_variables)
assert st_code == 200, resp
session_variables.pop('X-Random-Header')
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_all", table, "UPDATE", exp_ev_data, session_variables = session_variables)
exp_ev_data = {
"old": {"c1": 1, "c2": "world"},
"new": None
}
st_code, resp = delete(hge_ctx, table, where_exp)
assert st_code == 200, resp
run graphql tests on both http and websocket; add parallelism (close #1868) (#1921) Examples 1) ` pytest --hge-urls "http://127.0.0.1:8080" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" -vv ` 2) `pytest --hge-urls "http://127.0.0.1:8080" "http://127.0.0.1:8081" --pg-urls "postgresql://admin@127.0.0.1:5432/hge_tests" "postgresql://admin@127.0.0.1:5432/hge_tests2" -vv ` ### Solution and Design <!-- How is this issue solved/fixed? What is the design? --> <!-- It's better if we elaborate --> #### Reducing execution time of tests - The Schema setup and teardown, which were earlier done per test method, usually takes around 1 sec. - For mutations, the model has now been changed to only do schema setup and teardown once per test class. - A data setup and teardown will be done once per test instead (usually takes ~10ms). - For the test class to get this behaviour, one can can extend the class `DefaultTestMutations`. - The function `dir()` should be define which returns the location of the configuration folder. - Inside the configuration folder, there should be - Files `<conf_dir>/schema_setup.yaml` and `<conf_dir>/schema_teardown.yaml`, which has the metadata query executed during schema setup and teardown respectively - Files named `<conf_dir>/values_setup.yaml` and `<conf_dir>/values_teardown.yaml`. These files are executed to setup and remove data from the tables respectively. #### Running Graphql queries on both http and websockets - Each GraphQL query/mutation is run on the both HTTP and websocket protocols - Pytests test parameterisation is used to achieve this - The errors over websockets are slightly different from that on HTTP - The code takes care of converting the errors in HTTP to errors in websockets #### Parallel executation of tests. - The plugin pytest-xdist helps in running tests on parallel workers. - We are using this plugin to group tests by file and run on different workers. - Parallel test worker processes operate on separate postgres databases(and separate graphql-engines connected to these databases). Thus tests on one worker will not affect the tests on the other worker. - With two workers, this decreases execution times by half, as the tests on event triggers usually takes a long time, but does not consume much CPU.
2019-04-08 10:22:38 +03:00
check_event(hge_ctx, evts_webhook, "t1_all", table, "DELETE", exp_ev_data)
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@usefixtures('per_method_tests_db_state')
class TestManualEvents(object):
run default tests in test_server_upgrade (#3718) * run basic tests after upgrade * terminate before specifying file in pytest cmd * Move fixture definitions out of test classes Previously we had abstract classes with the fixtures defined in them. The test classes then inherits these super classes. This is creating inheritence problems, especially when you want to just inherit the tests in class, but not the fixtures. We have now moved all those fixture definitions outside of the class (in conftest.py). These fixtures are now used by the test classes when and where they are required. * Run pytests on server upgrade Server upgrade tests are run by 1) Run pytest with schema/metadata setup but do not do schema/metadata teardown 2) Upgrade the server 3) Run pytest using the above schema and teardown at the end of the tests 4) Cleanup hasura metadata and start again with next set of tests We have added options --skip-schema-setup and --skip-schema-teardown to help running server upgrade tests. While running the tests, we noticed that error codes and messages for some of the tests have changed. So we have added another option to pytest `--avoid-error-message-checks`. If this flag is set, and if comparing expected and response message fails, and if the expected response has an error message, Pytest will throw warnings instead of an error. * Use marks to specify server-upgrade tests Not all tests can be run as serve upgrade tests, particularly those which themselves change the schema. We introduce two pytest markers. Marker allow_server_upgrade_test will add the test into the list of server upgrade tests that can be run. skip_server_upgrade_test removes it from the list. With this we have added tests for queries, mutations, and selected event trigger and remote schema tests to the list of server upgrade tests. * Remove components not needed anymore * Install curl * Fix error in query validation * Fix error in test_v1_queries.py * install procps for server upgrade tests * Use postgres image which has postgis installed * set pager off with psql * quote the bash variable WORKTREE_DIR Co-authored-by: nizar-m <19857260+nizar-m@users.noreply.github.com> Co-authored-by: Vamshi Surabhi <0x777@users.noreply.github.com>
2020-02-13 12:14:02 +03:00
@classmethod
def dir(cls):
return 'queries/event_triggers/manual_events'
def test_basic(self, hge_ctx, evts_webhook):
st_code, resp = hge_ctx.v1q_f('queries/event_triggers/manual_events/enabled.yaml')
assert st_code == 200, resp
st_code, resp = hge_ctx.v1q_f('queries/event_triggers/manual_events/disabled.yaml')
assert st_code == 400, resp
@usefixtures('per_method_tests_db_state')
class TestEventsAsynchronousExecution(object):
@classmethod
def dir(cls):
return 'queries/event_triggers/async_execution'
def test_async_execution(self,hge_ctx,evts_webhook):
"""
A test to check if the events generated by the graphql-engine are
processed asynchronously. This test measures the time taken to process
all the events and that time should definitely be lesser than the time
taken if the events were to be executed sequentially.
This test inserts 5 rows and the webhook(/sleep_2s) takes
~2 seconds to process one request. So, if the graphql-engine
were to process the events sequentially it will take 5 * 2 = 10 seconds.
Theorotically, all the events should have been processed in ~2 seconds,
adding a 5 seconds buffer to the comparision, so that this test
doesn't flake in the CI.
"""
table = {"schema": "hge_tests", "name": "test_t1"}
payload = range(1,6)
rows = list(map(lambda x: {"c1": x, "c2": "hello"}, payload))
st_code, resp = insert_many(hge_ctx, table, rows)
start_time = time.perf_counter()
assert st_code == 200, resp
for i in range(1,6):
_ = evts_webhook.get_event(5) # webhook takes 2 seconds to process a request (+ buffer)
end_time = time.perf_counter()
time_elapsed = end_time - start_time
assert time_elapsed < 10