### Description
This monster of a PR took way too long. As the title suggests, it reduces the schema context carried in the readers to the very strict minimum. In practice, that means that to build a source, we only require:
- the global `SchemaContext`
- the global `SchemaOptions` (soon to be renamed `SchemaSourceOptions`)
- that source's `SourceInfo`
Furthermore, _we no longer carry "default" customization options throughout the schema_. All customization information is extracted from the `SourceInfo`, when required. This prevents an entire category of bugs we had previously encountered, such as parts of the code using uninitialized / unupdated customization info.
In turn, this meant that we could remove the explicit threading of the `SourceInfo` throughout the schema, since it is now always available through the reader context.
Finally, this meant making a few adjustments to relay and actions as well, such as the introduction of a new separate "context" for actions, and a change to how we create some of the action-specific postgres scalar parsers.
I'll highlight with review comments the areas of interest.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/6709
GitOrigin-RevId: ea80fddcb24e2513779dd04b0b700a55f0028dd1
The intent is to generalize `columnParser` to the point where it is the same across all backends, and then remove the interface in favor of a single implementation.
This extracts out `enumParser` and `possiblyNullable` as the two main areas that differ across backends. We may split `possiblyNullable` further so that we can extract some of that logic out into a common function too.
With these changes, the various `columnParser` implementations become semantically equivalent. They still do different things, and so reconciling them will require further changes.
Co-Authored-By: Antoine Leblanc <antoine@hasura.io>
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5841
GitOrigin-RevId: eec1770931eed5d72da70c97d7d0f00e33fa15d2
### Description
This PR changes all the schema code to operate in a specific `SchemaT` monad, rather than in an arbitrary `m` monad. `SchemaT` is intended to be used opaquely with `runSourceSchema` and `runRemoteSchema`. The main goal of this is to allow a different reader context per part of the schema: this PR also minimizes the contexts. This means that we no longer require `SchemaOptions` when building remote schemas' schema, and this PR therefore removes a lot of dummy / placeholder values accordingly.
### Performance and stacking
This PR has been through several iterations. #5339 was the original version, that accomplished the same thing by stacking readers on top of the stack at every remote relationship boundary. This raised performance concerns, and @0x777 confirmed with an ad-hoc test that in some extreme cases we could see up to a 10% performance impact. This version, while more verbose, allows us to unstack / re-stack the readers, and avoid that problem. #5517 adds a new benchmark set to be able to automatically measure this on every PR.
### Remaining work
- [x] a comment (or perhaps even a Note?) should be added to `SchemaT`
- [x] we probably want for #5517 to be merged first so that we can confirm the lack of performance penalty
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5458
GitOrigin-RevId: e06b83d90da475f745b838f1fd8f8b4d9d3f4b10
### Description
This PR is a first step towards having a dedicated reader context per schema block. It adds the required Reader instance, and switches from a `SchemaT ReaderT` stack to a `ReaderT SchemaT` stack. Furthermore, it cleans up / harmonizes some of the top-level schema building functions.
Sources and remotes are now built each within their own run of `runReaderT`: for now, the reader context is the same in both cases, meaning no special care is required at the boundary of remote relationships.
Actions are explicitly run with the source context for now; we could envision creating a third and distinct context for them.
This PR is expected to be a no-op.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5300
GitOrigin-RevId: a014e5b3504eb4ef740c820d305d6d2695f622f7
Followup to hasura/graphql-engine-mono#4713.
The `memoizeOn` method, part of `MonadSchema`, originally had the following type:
```haskell
memoizeOn
:: (HasCallStack, Ord a, Typeable a, Typeable b, Typeable k)
=> TH.Name
-> a
-> m (Parser k n b)
-> m (Parser k n b)
```
The reason for operating on `Parser`s specifically was that the `MonadSchema` effect would additionally initialize certain `Unique` values, which appear (nested in) the type of `Parser`.
hasura/graphql-engine-mono#518 changed the type of `memoizeOn`, to additionally allow memoizing `FieldParser`s. These also contained a `Unique` value, which was similarly initialized by the `MonadSchema` effect. The new type of `memoizeOn` was as follows:
```haskell
memoizeOn
:: forall p d a b
. (HasCallStack, HasDefinition (p n b) d, Ord a, Typeable p, Typeable a, Typeable b)
=> TH.Name
-> a
-> m (p n b)
-> m (p n b)
```
Note the type `p n b` of the value being memoized: by choosing `p` to be either `Parser k` or `FieldParser`, both can be memoized. Also note the new `HasDefinition (p n b) d` constraint, which provided a `Lens` for accessing the `Unique` value to be initialized.
A quick simplification is that the `HasCallStack` constraint has never been used by any code. This was realized in hasura/graphql-engine-mono#4713, by removing that constraint.
hasura/graphql-engine-mono#2980 removed the `Unique` value from our GraphQL-related types entirely, as their original purpose was never truly realized. One part of removing `Unique` consisted of dropping the `HasDefinition (p n b) d` constraint from `memoizeOn`.
What I didn't realize at the time was that this meant that the type of `memoizeOn` could be generalized and simplified much further. This PR finally implements that generalization. The new type is as follows:
```haskell
memoizeOn ::
forall a p.
(Ord a, Typeable a, Typeable p) =>
TH.Name ->
a ->
m p ->
m p
```
This change has a couple of consequences.
1. While constructing the schema, we often output `Maybe (Parser ...)`, to model that the existence of certain pieces of GraphQL schema sometimes depends on the permissions that a certain role has. The previous versions of `memoizeOn` were not able to handle this, as the only thing they could memoize was fully-defined (if not yet fully-evaluated) `(Field)Parser`s. This much more general API _would_ allow memoizing `Maybe (Parser ...)`s. However, we probably have to be continue being cautious with this: if we blindly memoize all `Maybe (Parser ...)`s, the resulting code may never be able to decide whether the value is `Just` or `Nothing` - i.e. it never commits to the existence-or-not of a GraphQL schema fragment. This would manifest as a non-well-founded knot tying, and this would get reported as an error by the implementation of `memoizeOn`.
tl;dr: This generalization _technically_ allows for memoizing `Maybe` values, but we probably still want to avoid doing so.
For this reason, the PR adds a specialized version of `memoizeOn` to `Hasura.GraphQL.Schema.Parser`.
2. There is no longer any need to connect the `MonadSchema` knot-tying effect with the `MonadParse` effect. In fact, after this PR, the `memoizeOn` method is completely GraphQL-agnostic, and so we implement hasura/graphql-engine-mono#4726, separating `memoizeOn` from `MonadParse` entirely - `memoizeOn` can be defined and implemented as a general Haskell typeclass method.
Since `MonadSchema` has been made into a single-type-parameter type class, it has been renamed to something more general, namely `MonadMemoize`. Its only task is to memoize arbitrary `Typeable p` objects under a combined key consisting of a `TH.Name` and a `Typeable a`.
Also for this reason, the new `MonadMemoize` has been moved to the more general `Control.Monad.Memoize`.
3. After this change, it's somewhat clearer what `memoizeOn` does: it memoizes an arbitrary value of a `Typeable` type. The only thing that needs to be understood in its implementation is how the manual blackholing works. There is no more semantic interaction with _any_ GraphQL code.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/4725
Co-authored-by: Daniel Harvey <4729125+danieljharvey@users.noreply.github.com>
GitOrigin-RevId: 089fa2e82c2ce29da76850e994eabb1e261f9c92
### Description
By definition, root fields are at the root of the schema: only functions that craft root fields need to know about how to customize the name of root fields. However, the presence of `Has MkRootFieldName` in `MonadBuildSchemaBase` meant that the entirety of the schema building code was implicitly aware of / capable of altering root field names.
This PR removes this constraint, and moves it to the functions that do craft root fields. This has several upsides:
- it makes it more explicit where root fields are being crafted
- it prevents functions that should not use this from mistakenly applying it to non-root fields
- it simplifies the shared schema context
### Future work
- can we maybe pass this as an argument, instead of making it a required part of the context?
- ~~AFAICT, we only ever use `mempty` for it: is this actually dead code that we should actually just remove altogether?~~
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5235
GitOrigin-RevId: 4268751f3ab87ae8e03b6fe9e1efa1b096200027
This moves `MkTypename` and `NamingCase` into their own modules, with the intent of reducing the scope of the schema parsers code, and trying to reduce imports of large modules when small ones will do.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/4978
GitOrigin-RevId: 19541257fe010035390f6183a4eaa37bae0d3ca1
The code that builds the GraphQL schema, and `buildGQLContext` in particular, is partial: not every value of `(ServerConfigCtx, GraphQLQueryType, SourceCache, HashMap RemoteSchemaName (RemoteSchemaCtx, MetadataObject), ActionCache, AnnotatedCustomTypes)` results in a valid GraphQL schema. When it fails, we want to be able to return better error messages than we currently do.
The key thing that is missing is a way to trace back GraphQL type information to their origin from the Hasura metadata. Currently, we have a number of correctness checks of our GraphQL schema. But these correctness checks only have access to pure GraphQL type information, and hence can only report errors in terms of that. Possibly the worst is the "conflicting definitions" error, which, in practice, can only be debugged by Hasura engineers. This is terrible DX for customers.
This PR allows us to print better error messages, by adding a field to the `Definition` type that traces the GraphQL type to its origin in the metadata. So the idea is simple: just add `MetadataObjId`, or `Maybe` that, or some other sum type of that, to `Definition`.
However, we want to avoid having to import a `Hasura.RQL` module from `Hasura.GraphQL.Parser`. So we instead define this additional field of `Definition` through a new type parameter, which is threaded through in `Hasura.GraphQL.Parser`. We then define type synonyms in `Hasura.GraphQL.Schema.Parser` that fill in this type parameter, so that it is not visible for the majority of the codebase.
The idea of associating metadata information to `Definition`s really comes to fruition when combined with hasura/graphql-engine-mono#4517. Their combination would allow us to use the API of fatal errors (just like the current `MonadError QErr`) to report _inconsistencies_ in the metadata. Such inconsistencies are then _automatically_ ignored. So no ad-hoc decisions need to be made on how to cut out inconsistent metadata from the GraphQL schema. This will allow us to report much better errors, as well as improve the likelihood of a successful HGE startup.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/4770
Co-authored-by: Samir Talwar <47582+SamirTalwar@users.noreply.github.com>
GitOrigin-RevId: 728402b0cae83ae8e83463a826ceeb609001acae
## Motivation
This PR rewrites most of Relay to achieve the following:
- ~~fix a bug in which the same node id could refer to two different tables in the schema~~
- remove one of the few remaining uses of the source cache in the schema building code
In doing so, it also:
- simplifies the `BackendSchema` class by removing `node` from it,
- makes it much easier for other backends to support Relay,
- documents, re-organizes, and clarifies the code.
## Description
This PR introduces a new `NodeId` version ~~, and adapts the Postgres code to always generate this V2 version~~. This new id contains the source name, in addition to the table name, in order to disambiguate similar table names across different sources (which is now possible with source customization). In doing so, it now explicitly handles that case for V1 node ids, and returns an explicit error message instead of running the risk of _silently returning the wrong information_.
Furthermore, it adapts `nodeField` to support multiple backends; most of the code was trivial to generalize, and as a result it lowers the cost of entry for other backends, that now only need to support `AFNodeId` in their translation layer.
Finally, it removes one more cycle in the schema building code, by using the same trick we used for remote relationships instead of using the memoization trick of #4576.
## Remaining work
- ~~[ ]write a Changelog entry~~
- ~~[x] adapt all tests that were asserting on an old node id~~
## Future work
This PR was adapted from its original form to avoid a breaking change: while it introduces a Node ID V2, we keep generating V1 IDs and the parser rejects V2 IDs. It will be easy to make the switch at a later data in a subsequent PR.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/4593
GitOrigin-RevId: 88e5cb91e8b0646900547fa8c7c0e1463de267a1
### Description
The main goal of this PR is, as stated, to remove the circular dependency in the schema building code. This cycle arises from the existence of remote relationships: when we build the schema for a source A, a remote relationship might force us to jump to the schema of a source B, or some remote schema. As a result, we end up having to do a dispatch from a "leaf" of the schema, similar to the one done at the root. In turn, this forces us to carry along in the schema a lot of information required for that dispatch, AND it forces us to import the instances in scope, creating an import loop.
As discussed in #4489, this PR implements the "dependency injection" solution: we pass to the schema a function to call to do the dispatch, and to get a generated field for a remote relationship. That way, this function can be chosen at the root level, and the leaves need not be aware of the overall context.
This PR grew a bit bigger than that, however; in an attempt to try and remove the `SourceCache` from the schema altogether, it changed a lot of functions across the schema building code, to thread along the `SourceInfo b` of the source being built. This avoids having to do cache lookups within a given source. A few cases remain, such as relay, that we might try to tackle in a subsequent PR.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/4557
GitOrigin-RevId: 9388e48372877520a72a9fd1677005df9f7b2d72
## Description
This PR removes `RQL.Types`, which was now only re-exporting a bunch of unrelated modules.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/4363
GitOrigin-RevId: 894f29a19bff70b3dad8abc5d9858434d5065417
We build the GraphQL schema by combining building blocks such as `tableSelectionSet` and `columnParser`. These building blocks individually build `{InputFields,Field,}Parser` objects. Those object specify the valid GraphQL schema.
Since the GraphQL schema is role-dependent, at some point we need to know what fragment of the GraphQL schema a specific role is allowed to access, and this is stored in `{Sel,Upd,Ins,Del}PermInfo` objects.
We have passed around these permission objects as function arguments to the schema building blocks since we first started dealing with permissions during the PDV refactor - see hasura/graphql-engine@5168b99e46 in hasura/graphql-engine#4111. This means that, for instance, `tableSelectionSet` has as its type:
```haskell
tableSelectionSet ::
forall b r m n.
MonadBuildSchema b r m n =>
SourceName ->
TableInfo b ->
SelPermInfo b ->
m (Parser 'Output n (AnnotatedFields b))
```
There are three reasons to change this.
1. We often pass a `Maybe (xPermInfo b)` instead of a proper `xPermInfo b`, and it's not clear what the intended semantics of this is. Some potential improvements on the data types involved are discussed in issue hasura/graphql-engine-mono#3125.
2. In most cases we also already pass a `TableInfo b`, and together with the `MonadRole` that is usually also in scope, this means that we could look up the required permissions regardless: so passing the permissions explicitly undermines the "single source of truth" principle. Breaking this principle also makes the code more difficult to read.
3. We are working towards role-based parsers (see hasura/graphql-engine-mono#2711), where the `{InputFields,Field,}Parser` objects are constructed in a role-invariant way, so that we have a single object that can be used for all roles. In particular, this means that the schema building blocks _need_ to be constructed in a role-invariant way. While this PR doesn't accomplish that, it does reduce the amount of role-specific arguments being passed, thus fixing hasura/graphql-engine-mono#3068.
Concretely, this PR simply drops the `xPermInfo b` argument from almost all schema building blocks. Instead these objects are looked up from the `TableInfo b` as-needed. The resulting code is considerably simpler and shorter.
One way to interpret this change is as follows. Before this PR, we figured out permissions at the top-level in `Hasura.GraphQL.Schema`, passing down the obtained `xPermInfo` objects as required. After this PR, we have a bottom-up approach where the schema building blocks themselves decide whether they want to be included for a particular role.
So this moves some permission logic out of `Hasura.GraphQL.Schema`, which is very complex.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/3608
GitOrigin-RevId: 51a744f34ec7d57bc8077667ae7f9cb9c4f6c962
This PR pretty much does the same thing to remote relationship types in schemacache as what #2979 did to remote relationship types in the IR. On main remote relationships are represented by types of form `T from to`. This PR changes it to `T from` which makes it a lot more reusable.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/3037
GitOrigin-RevId: 90a5c9e2346c8dc2da6ec5b8c970d6c863d2afb8
This PR simplifies the types that represent a remote relationship in IR so that they can be reused in other parts (in remote schema types) which could have remote relationships.
The comments on the PR explain the main changes.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/2979
GitOrigin-RevId: 559c51d9d6ae79e2183ce4347018741b9096ac74
We'll see if this improves compile times at all, but I think it's worth
doing as at least the most minimal form of module documentation.
This was accomplished by first compiling everything with
-ddump-minimal-imports, and then a bunch of scripting (with help from
ormolu)
**EDIT** it doesn't seem to improve CI compile times but the noise floor is high as it looks like we're not caching library dependencies anymore
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/2730
GitOrigin-RevId: 667eb8de1e0f1af70420cbec90402922b8b84cb4
>
### Description
>
Insert mutations for MSSQL backend. This PR implements execution logic.
### Changelog
- [x] `CHANGELOG.md` is updated with user-facing content relevant to this PR. If no changelog is required, then add the `no-changelog-required` label.
### Affected components
- [x] Server
- [x] Tests
### Related Issues
->
Close https://github.com/hasura/graphql-engine-mono/issues/2114
### Steps to test and verify
>
Track a MSSQL table and perform the generated insert mutation to test.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/2248
Co-authored-by: Abby Sassel <3883855+sassela@users.noreply.github.com>
Co-authored-by: Philip Lykke Carlsen <358550+plcplc@users.noreply.github.com>
GitOrigin-RevId: 936f138c80d7a928180e6e7b0c4da64ecc1f7ebc
This commit applies ormolu to the whole Haskell code base by running `make format`.
For in-flight branches, simply merging changes from `main` will result in merge conflicts.
To avoid this, update your branch using the following instructions. Replace `<format-commit>`
by the hash of *this* commit.
$ git checkout my-feature-branch
$ git merge <format-commit>^ # and resolve conflicts normally
$ make format
$ git commit -a -m "reformat with ormolu"
$ git merge -s ours post-ormolu
https://github.com/hasura/graphql-engine-mono/pull/2404
GitOrigin-RevId: 75049f5c12f430c615eafb4c6b8e83e371e01c8e
>
### Description
>
This PR is an incremental work towards [enabling insert mutations on MSSQL](https://github.com/hasura/graphql-engine-mono/pull/1974). In this PR, we generate insert mutation schema parser for MSSQL backend.
### Changelog
- [ ] `CHANGELOG.md` is updated with user-facing content relevant to this PR. If no changelog is required, then add the `no-changelog-required` label.
### Affected components
- [x] Server
https://github.com/hasura/graphql-engine-mono/pull/2141
GitOrigin-RevId: 8595008dece35f7fded9c52e134de8b97b64f53f
Query plan caching was introduced by - I believe - hasura/graphql-engine#1934 in order to reduce the query response latency. During the development of PDV in hasura/graphql-engine#4111, it was found out that the new architecture (for which query plan caching wasn't implemented) performed comparably to the pre-PDV architecture with caching. Hence, it was decided to leave query plan caching until some day in the future when it was deemed necessary.
Well, we're in the future now, and there still isn't a convincing argument for query plan caching. So the time has come to remove some references to query plan caching from the codebase. For the most part, any code being removed would probably not be very well suited to the post-PDV architecture of query execution, so arguably not much is lost.
Apart from simplifying the code, this PR will contribute towards making the GraphQL schema generation more modular, testable, and easier to profile. I'd like to eventually work towards a situation in which it's easy to generate a GraphQL schema parser *in isolation*, without being connected to a database, and then parse a GraphQL query *in isolation*, without even listening any HTTP port. It is important that both of these operations can be examined in detail, and in isolation, since they are two major performance bottlenecks, as well as phases where many important upcoming features hook into.
Implementation
The following have been removed:
- The entirety of `server/src-lib/Hasura/GraphQL/Execute/Plan.hs`
- The core phases of query parsing and execution no longer have any references to query plan caching. Note that this is not to be confused with query *response* caching, which is not affected by this PR. This includes removal of the types:
- - `Opaque`, which is replaced by a tuple. Note that the old implementation was broken and did not adequately hide the constructors.
- - `QueryReusability` (and the `markNotReusable` method). Notably, the implementation of the `ParseT` monad now consists of two, rather than three, monad transformers.
- Cache-related tests (in `server/src-test/Hasura/CacheBoundedSpec.hs`) have been removed .
- References to query plan caching in the documentation.
- The `planCacheOptions` in the `TenantConfig` type class was removed. However, during parsing, unrecognized fields in the YAML config get ignored, so this does not cause a breaking change. (Confirmed manually, as well as in consultation with @sordina.)
- The metrics no longer send cache hit/miss messages.
There are a few places in which one can still find references to query plan caching:
- We still accept the `--query-plan-cache-size` command-line option for backwards compatibility. The `HASURA_QUERY_PLAN_CACHE_SIZE` environment variable is not read.
https://github.com/hasura/graphql-engine-mono/pull/1815
GitOrigin-RevId: 17d92b254ec093c62a7dfeec478658ede0813eb7
