* [ breaking ] remove parsing of dangling binders
It used to be the case that
```
ID : Type -> Type
ID a = a
test : ID (a : Type) -> a -> a
test = \ a, x => x
```
and
```
head : List $ a -> Maybe a
head [] = Nothing
head (x :: _) = Just x
```
were accepted but these are now rejected because:
* `ID (a : Type) -> a -> a` is parsed as `(ID (a : Type)) -> a -> a`
* `List $ a -> Maybe a` is parsed as `List (a -> Maybe a)`
Similarly if you want to use a lambda / rewrite / let expression as
part of the last argument of an application, the use of `$` or parens
is now mandatory.
This should hopefully allow us to make progress on #1703
* Stub for future 'identity' optimisation
I plan to add this later, but I'm using for now for
NaturalToInteger and IntegerToNatural
* Refactor `%builtin`
fixes#1799
- automatically optimise all Natural shaped things
- NaturalToInteger and IntegerToNatural now use
new `Identity` flag (internal use only for now)
which signals the function is identity at runtime
* Use NaturalToInteger and IntegerToNatural for Nat and Fin
Also define show fin in terms of finToInteger, for speed
* Fix name handling for %builtin
* [ tests ] fixes + #1799
* remove %builtin from libs
Add back after next version
* Use resolved names where convenient
The previous definition means it won't reduce until it's applied to
4 arguments which may have detrimental effects: ``f `on` fst`` would
for instance stay blocked, with some implicit arguments of the form
`DPair a b`. This means that `b` appears in a negative position in
the expression which may lead to positivity checking rejecting a
datatype defined using `on`!
I have decided to leave `g` and `f` on the LHS because I expect `on`
to be used either:
1. partially applied to two arguments
2. in a section if only applied to 1 and sections get eta-expanded
by the parser so that's fine.
Turns out that `Smaller` and `LT` won't unify because
1. the instance Sized Nat is not publicly exported
2. Smaller, and LT are stuck until fully applied
The given changes make that go away.
I can't make sense of this code, it seems to try to convert the
case function corresponding to `let (a, b) = f n in ...` into a
different case function where `f n` and `(a, b)` have been unified.
But if `f n` is a bona fide stuck computation, there's no chance of
this happening.
Just turning this off solves the #1782 and only breaks one function
in the whole of the idris2 repo (I would have expected our current
termination oracle to be too weak to detect it as valid anyway!)
and one in frex (which, again, should not have been seen as terminating).
Also fixes#1460
In the `MkFix : f (Fix f) -> Fix f` example, using `Erased` for `f`
makes the type reduce to `[__] (Fix [__]) -> Fix [__]` and because
`[__] e1 ... en` computes to `[__]`, we end up with `[__] -> Fix [__]`
which does not reference `Fix` anymore.
A few proofs have been rewritten, a few unnecessary cases cut, and
lots of unnecessary "explicit implicits" have been cut. Probably these
implicits were required when the code was initially written, and
inference has improved since then.
`testInDir dir ...` lists all directories in `dir` which contains
`run` files, and such directories are considered tests.
This is done to make test addition/maintenance cheaper.
Convert some test directories to `testInDir`, but not all of them
because
* some directories are listed in several test groups
* other directories are have some tests disabled
These entries returned by `readdir` are legacy of Unix API, we don't
really need them. Most APIs do not return them (for example Java
`Files.newDirectoryStream` or Python `os.listdir`).
* add `nextDirEntry` which returns `Maybe String`, so `Nothing` on
the end of directory unlike `dirEntry` which returns unspecified error
on the end of directory
* `dirEntry` is deprecated now, but not removed because compiler depends on it
* native implementation of `dirEntry` is patched to explicitly reset `errno`
before the `readdir` call: without it end of directory and error were
indistinguishable
* test added
* Add trailing newline on non-empty list in unlines
There are several reasons to do that:
* a line in a text file is something which ends with newline,
and the last line is not special
* `unlines []` should be different from `unlines [""]`
* `unlines (a ++ b) = unlines a ++ unlines b`
* Haskell does it
* Change lines function behaviour
Situation I just ran into that I found confusing:
```
Golden value differs from actual value.
Accept actual value as new golden value? [y/N]
N
Invalid answer.
```
To be able to use `C` functions for both Scheme and RefC: it was
not possible for `Buffer` before this PR.
As an example, `writeBufferData` and `readBufferData` functions are
removed: generic C backend implementations are used instead.
* add `strerror` function
* move `getErrno` to `System.Errno`
* use `strerror` in `Show FileError`
* on node there's no access to `strerror`, so `strerror` just converts the number to string
Convert `App.Control.Exception` interface to an alias to `HasErr`.
Probably `Exception` interface need to be deprecated or removed.
Note similar problem exists with `PrimIO` calling `PrimIO, Exception`,
also need to be fixed.
Fix this scenario:
```
throwBoth : Has [Exception String, Exception Int] es => App es ()
throwOne : Has [Exception Int] es => App es Int
throwOne {es} = handle {err = String} {e = es} throwBoth (\r => pure 1) (\e => pure 3)
```
With this commit it works, before this commit it failed with:
```
Error: While processing right hand side of throwOne. Can't find an implementation for Exception Int (String :: es).
TestException.idr:8:48--8:57
|
8 | throwOne {es} = handle {err = String} {e = es} throwBoth (\r => pure 1) (\e => pure 3)
| ^^^^^^^^^
```
Since `[a..b]` uses `takeUntil`/`takeBefore` indirectly those too had to
be changed to `public export` clashing with `Data.Stream` definitions.
A small readability refactor was made with the `compare` function from
`EqOrd`.
To be able to eventually refactor/extend `system` function: to be
able to specify a directory, environment variables, specify arguments
as array etc. Ideally it should be something like Rust
[`std::process::Command`](https://doc.rust-lang.org/std/process/struct.Command.html).
Why:
* To implement robust cross-project go-to-definition in LSP
i.e you can jump to definition of any global name coming
from library dependencies, as well as from the local project files.
What it does:
* Modify `FC`s to carry `ModuleIdent` for .idr sources,
file name for .ipkg sources or nothing for interactive runs.
* Add `--install-with-src` to install the source code alongside
the ttc binaries. The source is installed into the same directory
as the corresponding ttc file. Installed sources are made read-only.
* As we install the sources pinned to the related ttc files we gain
the versioning of sources for free.
* Add utility functions to treat All as a heterogeneous container
* Distinguish RefC Int and Bits types
* Change RefC Integers to be arbitrary precision
* Add RefC Bits maths operations
* Make RefC div and mod Euclidean
* Add RefC bit-ops tests
* Add RefC integer comparison tests
* Add RefC IntN support
Put the dependency checks in the banner, e.g.:
------------------------------------------------------------------------
Base library
✓ Found Chez at /usr/bin/chezscheme9.5
✓ Found node at /usr/bin/node
------------------------------------------------------------------------
- Fix off-by-one error in String reverse
- Correct order of arguments in strSubstr
- Actually use start index of strSubstr
- Reduce memory usage of strSubstr in case of overrunning string end
- Add fastPack/fastUnpack/fastConcat
- Use unsigned chars for character comparisons
- Fix generated C character encodings
We don't need to write the current namespace every single time! This
won't work as well if there's namespaces in the file, so it needs
refining a bit, but this reduces loading time anyway.
* Banners for test pools
* Summary with the list of failing tests at the end
* Option to write the list of failing tests to a file
* Option to read the list of tests to run from a file
* Using these two latest features to add a new make target to rerun precisely the tests that failed last time
It has always bothered me that 'False' got mapped to tag 1 and 'True'
got mapped to tag 0. This doesn't change much in practice (except that
perhaps a code generator might notice some useful things in intToBool)
but I'm changing it now anyway. Also added a couple of inlinings of
boolean operations.
We should really get these automatically, but until we do, add the
flags. Chez seems to spot these anyway, but again it makes the generated
code easier to look at, and it removes some needless abstraction over
interfaces at runtime.
We've had these for a while, used for interface specialisation, but
they're not yet used anywhere else or properly documented. We should
document them soon, but for now, it's a useful performance boost to
always use the fast versions of pack/unpack/concat at runtime.
Also moves a couple to the prelude, to ensure that the fast versions are
defined in the same place as the 'normal' version so that the
transformation will always fire (that is, no need to import Data.String
for the transformation to work).
When flattening the `SimpleDocTree` created from a `SimpleDocStream`, the
first part of a concatenated doc was sometimes dropped, depending on the
result of the recursive call to `flatten`.
This change adds logic to set up sockaddr correctly for connect and
bind, handles the AF_UNIX case for getSockAddr and expands the existing
test to cover unix sockets.
This has a much better behaviour with respect to proof search and
the coverage checker realising we don't need to consider the Z case
than the `Not (x = Z)` we used earlier.
