diff --git a/nixos/doc/manual/release-notes/rl-2311.section.md b/nixos/doc/manual/release-notes/rl-2311.section.md index 5df8473babae..d2dece0be4d4 100644 --- a/nixos/doc/manual/release-notes/rl-2311.section.md +++ b/nixos/doc/manual/release-notes/rl-2311.section.md @@ -1,262 +1,254 @@ -# Release 23.11 (“Tapir”, 2023.11/??) {#sec-release-23.11} - -## Highlights {#sec-release-23.11-highlights} - -- FoundationDB now defaults to major version 7. - -- PostgreSQL now defaults to major version 15. - -- GNOME has been updated to version 45, see the [release notes](https://release.gnome.org/45/) for details. Notably, Loupe has replaced Eye of GNOME as the default image viewer, Snapshot has replaced Cheese as the default camera application, and Photos will no longer be installed. - -- Support for WiFi6 (IEEE 802.11ax) and WPA3-SAE-PK was enabled in the `hostapd` package, along with a significant rework of the hostapd module. - -- LXD now supports virtual machine instances to complement the existing container support - -- The `nixos-rebuild` command has been given a `list-generations` subcommand. See `man nixos-rebuild` for more details. - -- [systemd](https://systemd.io) has been updated from v253 to v254, see [the release notes](https://github.com/systemd/systemd/blob/v254/NEWS#L3-L659) for more information on the changes. - - `boot.resumeDevice` **must be specified** when hibernating if not in EFI mode. - - systemd may warn your system about the permissions of your ESP partition (often `/boot`), this warning can be ignored for now, we are looking - into a satisfying solution regarding this problem. - - Updating with `nixos-rebuild boot` and rebooting is recommended, since in some rare cases the `nixos-rebuild switch` into the new generation on a live system might fail due to missing mount units. - -- [`sudo-rs`], a reimplementation of `sudo` in Rust, is now supported. - An experimental new module `security.sudo-rs` was added. - Switching to it (via ` security.sudo-rs.enable = true;`) introduces - slight changes in sudo behaviour, due to `sudo-rs`' current limitations: - - terminfo-related environment variables aren't preserved for `root` and `wheel`; - - `root` and `wheel` are not given the ability to set (or preserve) - arbitrary environment variables. - - **Note:** The `sudo-rs` module only takes configuration through `security.sudo-rs`, - and in particular does not automatically use previously-set rules; this could be - achieved with `security.sudo-rs.extraRules = security.sudo.extraRules;` for instance. - -[`sudo-rs`]: https://github.com/memorysafety/sudo-rs/ - -- [glibc](https://www.gnu.org/software/libc/) has been updated from version 2.37 to 2.38, see [the release notes](https://sourceware.org/glibc/wiki/Release/2.38) for what was changed. - -- `linuxPackages_testing_bcachefs` is now soft-deprecated by `linuxPackages_testing`. - - Please consider changing your NixOS configuration's `boot.kernelPackages` to `linuxPackages_testing` until a stable kernel with bcachefs support is released. - -- All [ROCm](https://rocm.docs.amd.com/en/latest/) packages have been updated to 5.7.0. - - [ROCm](https://rocm.docs.amd.com/en/latest/) package attribute sets are versioned: `rocmPackages` -> `rocmPackages_5`. - -- `yarn-berry` has been updated to 4.0.1. This means that NodeJS versions less than `18.12` are no longer supported by it. More details at the [upstream changelog](https://github.com/yarnpkg/berry/blob/master/CHANGELOG.md). - -- If the user has a custom shell enabled via `users.users.${USERNAME}.shell = ${CUSTOMSHELL}`, the - assertion will require them to also set `programs.${CUSTOMSHELL}.enable = - true`. This is generally safe behavior, but for anyone needing to opt out from - the check `users.users.${USERNAME}.ignoreShellProgramCheck = true` will do the job. - -- Cassandra now defaults to 4.x, updated from 3.11.x. - -## New Services {#sec-release-23.11-new-services} - -- [MCHPRS](https://github.com/MCHPR/MCHPRS), a multithreaded Minecraft server built for redstone. Available as [services.mchprs](#opt-services.mchprs.enable). - -- [acme-dns](https://github.com/joohoi/acme-dns), a limited DNS server to handle ACME DNS challenges easily and securely. Available as [services.acme-dns](#opt-services.acme-dns.enable). - -- [frp](https://github.com/fatedier/frp), a fast reverse proxy to help you expose a local server behind a NAT or firewall to the Internet. Available as [services.frp](#opt-services.frp.enable). - - - -- [river](https://github.com/riverwm/river), A dynamic tiling wayland compositor. Available as [programs.river](#opt-programs.river.enable). - -- [wayfire](https://wayfire.org), A modular and extensible wayland compositor. Available as [programs.wayfire](#opt-programs.wayfire.enable). - -- [mautrix-whatsapp](https://docs.mau.fi/bridges/go/whatsapp/index.html) A Matrix-WhatsApp puppeting bridge - -- [hddfancontrol](https://github.com/desbma/hddfancontrol), a service to regulate fan speeds based on hard drive temperature. Available as [services.hddfancontrol](#opt-services.hddfancontrol.enable). - -- [seatd](https://sr.ht/~kennylevinsen/seatd/), A minimal seat management daemon. Available as [services.seatd](#opt-services.seatd.enable). - -- [GoToSocial](https://gotosocial.org/), an ActivityPub social network server, written in Golang. Available as [services.gotosocial](#opt-services.gotosocial.enable). - -- [Castopod](https://castopod.org/), an open-source hosting platform made for podcasters who want to engage and interact with their audience. Available as [services.castopod](#opt-services.castopod.enable). - -- [Typesense](https://github.com/typesense/typesense), a fast, typo-tolerant search engine for building delightful search experiences. Available as [services.typesense](#opt-services.typesense.enable). - -* [NS-USBLoader](https://github.com/developersu/ns-usbloader/), an all-in-one tool for managing Nintendo Switch homebrew. Available as [programs.ns-usbloader](#opt-programs.ns-usbloader.enable). - -- [athens](https://github.com/gomods/athens), a Go module datastore and proxy. Available as [services.athens](#opt-services.athens.enable). - -- [Mobilizon](https://joinmobilizon.org/), a Fediverse platform for publishing events. - -- [Anuko Time Tracker](https://github.com/anuko/timetracker), a simple, easy to use, open source time tracking system. Available as [services.anuko-time-tracker](#opt-services.anuko-time-tracker.enable). - -- [Prometheus MySQL exporter](https://github.com/prometheus/mysqld_exporter), a MySQL server exporter for Prometheus. Available as [services.prometheus.exporters.mysqld](#opt-services.prometheus.exporters.mysqld.enable). - -- [LibreNMS](https://www.librenms.org), a auto-discovering PHP/MySQL/SNMP based network monitoring. Available as [services.librenms](#opt-services.librenms.enable). - -- [Livebook](https://livebook.dev/), an interactive notebook with support for Elixir, graphs, machine learning, and more. - -- [sitespeed-io](https://sitespeed.io), a tool that can generate metrics (timings, diagnostics) for websites. Available as [services.sitespeed-io](#opt-services.sitespeed-io.enable). - -- [stalwart-mail](https://stalw.art), an all-in-one email server (SMTP, IMAP, JMAP). Available as [services.stalwart-mail](#opt-services.stalwart-mail.enable). - -- [tang](https://github.com/latchset/tang), a server for binding data to network presence. Available as [services.tang](#opt-services.tang.enable). - -- [Jool](https://nicmx.github.io/Jool/en/index.html), a kernelspace NAT64 and SIIT implementation, providing translation between IPv4 and IPv6. Available as [networking.jool.enable](#opt-networking.jool.enable). - -- [Home Assistant Satellite], a streaming audio satellite for Home Assistant voice pipelines, where you can reuse existing mic/speaker hardware. Available as [services.homeassistant-satellite](#opt-services.homeassistant-satellite.enable). - -- [Apache Guacamole](https://guacamole.apache.org/), a cross-platform, clientless remote desktop gateway. Available as [services.guacamole-server](#opt-services.guacamole-server.enable) and [services.guacamole-client](#opt-services.guacamole-client.enable) services. - -- [pgBouncer](https://www.pgbouncer.org), a PostgreSQL connection pooler. Available as [services.pgbouncer](#opt-services.pgbouncer.enable). - -- [Goss](https://goss.rocks/), a YAML based serverspec alternative tool for validating a server's configuration. Available as [services.goss](#opt-services.goss.enable). - -- [trust-dns](https://trust-dns.org/), a Rust based DNS server built to be safe and secure from the ground up. Available as [services.trust-dns](#opt-services.trust-dns.enable). - -- [osquery](https://www.osquery.io/), a SQL powered operating system instrumentation, monitoring, and analytics. - -- [ebusd](https://ebusd.eu), a daemon for handling communication with eBUS devices connected to a 2-wire bus system (“energy bus” used by numerous heating systems). Available as [services.ebusd](#opt-services.ebusd.enable). - -- [systemd-sysupdate](https://www.freedesktop.org/software/systemd/man/systemd-sysupdate.html), atomically updates the host OS, container images, portable service images or other sources. Available as [systemd.sysupdate](opt-systemd.sysupdate). - -- [eris-server](https://codeberg.org/eris/eris-go). [ERIS](https://eris.codeberg.page/) is an encoding for immutable storage and this server provides block exchange as well as content decoding over HTTP and through a FUSE file-system. Available as [services.eris-server](#opt-services.eris-server.enable). - -- [forgejo](https://forgejo.org/), a git forge. Previously deployed as a drop-in replacement package in the [gitea module](#opt-services.gitea.package). Available as [services.forgejo](#opt-services.forgejo.enable). See migration instructions in the [NixOS manual](#module-forgejo) on how to migrate your forgejo instance using [`services.gitea.package = pkgs.forgejo`](#opt-services.gitea.package) to [`services.forgejo`](#opt-services.forgejo.enable). - -- hardware/infiniband.nix adds infiniband subnet manager support using an [opensm](https://github.com/linux-rdma/opensm) systemd-template service, instantiated on card guids. The module also adds kernel modules and cli tooling to help administrators debug and measure performance. Available as [hardware.infiniband.enable](#opt-hardware.infiniband.enable). - -- [zwave-js](https://github.com/zwave-js/zwave-js-server), a small server wrapper around Z-Wave JS to access it via a WebSocket. Available as [services.zwave-js](#opt-services.zwave-js.enable). - -- [Honk](https://humungus.tedunangst.com/r/honk), a complete ActivityPub server with minimal setup and support costs. - Available as [services.honk](#opt-services.honk.enable). - -- [ferretdb](https://www.ferretdb.io/), an open-source proxy, converting the MongoDB 6.0+ wire protocol queries to PostgreSQL or SQLite. Available as [services.ferretdb](options.html#opt-services.ferretdb.enable). - -- [MicroBin](https://microbin.eu/), a feature rich, performant and secure text and file sharing web application, a "paste bin". Available as [services.microbin](#opt-services.microbin.enable). - -- [NNCP](http://www.nncpgo.org/). Added nncp-daemon and nncp-caller services. Configuration is set with [programs.nncp.settings](#opt-programs.nncp.settings) and the daemons are enabled at [services.nncp](#opt-services.nncp.caller.enable). - -- [FastNetMon Advanced](https://fastnetmon.com/product-overview/), a commercial high performance DDoS detector / sensor. Available as [services.fastnetmon-advanced](#opt-services.fastnetmon-advanced.enable). - -- [tuxedo-rs](https://github.com/AaronErhardt/tuxedo-rs), Rust utilities for interacting with hardware from TUXEDO Computers. - -- [certspotter](https://github.com/SSLMate/certspotter), a certificate transparency log monitor. Available as [services.certspotter](#opt-services.certspotter.enable). - -- [audiobookshelf](https://github.com/advplyr/audiobookshelf/), a self-hosted audiobook and podcast server. Available as [services.audiobookshelf](#opt-services.audiobookshelf.enable). - -- [ZITADEL](https://zitadel.com), a turnkey identity and access management platform. Available as [services.zitadel](#opt-services.zitadel.enable). - -- [exportarr](https://github.com/onedr0p/exportarr), Prometheus Exporters for Bazarr, Lidarr, Prowlarr, Radarr, Readarr, and Sonarr. Available as [services.prometheus.exporters.exportarr-bazarr](#opt-services.prometheus.exporters.exportarr-bazarr.enable)/[services.prometheus.exporters.exportarr-lidarr](#opt-services.prometheus.exporters.exportarr-lidarr.enable)/[services.prometheus.exporters.exportarr-prowlarr](#opt-services.prometheus.exporters.exportarr-prowlarr.enable)/[services.prometheus.exporters.exportarr-radarr](#opt-services.prometheus.exporters.exportarr-radarr.enable)/[services.prometheus.exporters.exportarr-readarr](#opt-services.prometheus.exporters.exportarr-readarr.enable)/[services.prometheus.exporters.exportarr-sonarr](#opt-services.prometheus.exporters.exportarr-sonarr.enable). - -- [netclient](https://github.com/gravitl/netclient), an automated WireGuard® Management Client. Available as [services.netclient](#opt-services.netclient.enable). - -- [trunk-ng](https://github.com/ctron/trunk), A fork of `trunk`: Build, bundle & ship your Rust WASM application to the web - -- [virt-manager](https://virt-manager.org/), an UI for managing virtual machines in libvirt, is now available as `programs.virt-manager`. - -- [Soft Serve](https://github.com/charmbracelet/soft-serve), a tasty, self-hostable Git server for the command line. Available as [services.soft-serve](#opt-services.soft-serve.enable). - -- [Rosenpass](https://rosenpass.eu/), a service for post-quantum-secure VPNs with WireGuard. Available as [services.rosenpass](#opt-services.rosenpass.enable). - -- [c2FmZQ](https://github.com/c2FmZQ/c2FmZQ/), an application that can securely encrypt, store, and share files, including but not limited to pictures and videos. Available as [services.c2fmzq-server](#opt-services.c2fmzq-server.enable). - -- [preload](http://sourceforge.net/projects/preload), a service that makes applications run faster by prefetching binaries and shared objects. Available as [services.preload](#opt-services.preload.enable). - -## Backward Incompatibilities {#sec-release-23.11-incompatibilities} - -- `services.postgresql.ensurePermissions` has been deprecated in favor of `services.postgresql.ensureUsers.*.ensureDBOwnership` which simplifies the setup of database owned by a certain system user - in local database contexts (which make use of peer authentication via UNIX sockets), migration guidelines were provided in the NixOS manual, please refer to them if you are affected by a PostgreSQL 15 changing the way `GRANT ALL PRIVILEGES` is working. `services.postgresql.ensurePermissions` will be removed in 24.05. All NixOS modules were migrated using one of the strategy, e.g. `ensureDBOwnership` or `postStart`. More about this situation can be learnt in https://github.com/NixOS/nixpkgs/pull/266270. - -- `network-online.target` has been fixed to no longer time out for systems with `networking.useDHCP = true` and `networking.useNetworkd = true`. - Workarounds for this can be removed. - -- The `boot.loader.raspberryPi` options have been marked deprecated, with intent for removal for NixOS 24.11. They had a limited use-case, and do not work like people expect. They required either very old installs ([before mid-2019](https://github.com/NixOS/nixpkgs/pull/62462)) or customized builds out of scope of the standard and generic AArch64 support. That option set never supported the Raspberry Pi 4 family of devices. - -- `python3.pkgs.sequoia` was removed in favor of `python3.pkgs.pysequoia`. The latter package is based on upstream's dedicated repository for sequoia's Python bindings, where the Python bindings from [gitlab:sequoia-pgp/sequoia](https://gitlab.com/sequoia-pgp/sequoia) were removed long ago. - -- `writeTextFile` now requires `executable` to be boolean, values like `null` or `""` will now fail to evaluate. - -- The latest version of `clonehero` now stores custom content in `~/.clonehero`. See the [migration instructions](https://clonehero.net/2022/11/29/v23-to-v1-migration-instructions.html). Typically, these content files would exist along side the binary, but the previous build used a wrapper script that would store them in `~/.config/unity3d/srylain Inc_/Clone Hero`. - -- `services.mastodon` doesn't support providing a TCP port to its `streaming` component anymore, as upstream implemented parallelization by running multiple instances instead of running multiple processes in one instance. Please create a PR if you are interested in this feature. - -- The `services.hostapd` module was rewritten to support `passwordFile` like options, WPA3-SAE, and management of multiple interfaces. This breaks compatibility with older configurations. - - `hostapd` is now started with additional systemd sandbox/hardening options for better security. - - `services.hostapd.interface` was replaced with a per-radio and per-bss configuration scheme using [services.hostapd.radios](#opt-services.hostapd.radios). - - `services.hostapd.wpa` has been replaced by [services.hostapd.radios.<name>.networks.<name>.authentication.wpaPassword](#opt-services.hostapd.radios._name_.networks._name_.authentication.wpaPassword) and [services.hostapd.radios.<name>.networks.<name>.authentication.saePasswords](#opt-services.hostapd.radios._name_.networks._name_.authentication.saePasswords) which configure WPA2-PSK and WP3-SAE respectively. - - The default authentication has been changed to WPA3-SAE. Options for other (legacy) schemes are still available. - -- `python3.pkgs.fetchPypi` (and `python3Packages.fetchPypi`) has been deprecated in favor of top-level `fetchPypi`. - -- xdg-desktop-portal has been updated to 1.18, which reworked how portal implementations are selected. If you roll your own desktop environment, you should either set `xdg.portal.config` or `xdg.portal.configPackages`, which allow fine-grained control over which portal backend to use for specific interfaces, as described in {manpage}`portals.conf(5)`. - - If you don't provide configurations, a portal backend will only be considered when the desktop you use matches its deprecated `UseIn` key. While some NixOS desktop modules should already ship one for you, it is suggested to test portal availability by trying [Door Knocker](https://flathub.org/apps/xyz.tytanium.DoorKnocker) and [ASHPD Demo](https://flathub.org/apps/com.belmoussaoui.ashpd.demo). If things regressed, you may run `G_MESSAGES_DEBUG=all /path/to/xdg-desktop-portal/libexec/xdg-desktop-portal` for ideas on which config file and which portals are chosen. - -- `pass` now does not contain `password-store.el`. Users should get `password-store.el` from Emacs lisp package set `emacs.pkgs.password-store`. - -- `services.knot` now supports `.settings` from RFC42. The previous `.extraConfig` still works the same, but it displays a warning now. - -- `services.invoiceplane` now supports .settings from RFC42. The previous .extraConfig still works the same, but it displays a warning now. - -- `mu` now does not install `mu4e` files by default. Users should get `mu4e` from Emacs lisp package set `emacs.pkgs.mu4e`. - -- `mariadb` now defaults to `mariadb_1011` instead of `mariadb_106`, meaning the default version was upgraded from 10.6.x to 10.11.x. See the [upgrade notes](https://mariadb.com/kb/en/upgrading-from-mariadb-10-6-to-mariadb-10-11/) for potential issues. - -- `getent` has been moved from `glibc`'s `bin` output to its own dedicated output, reducing closure size for many dependents. Dependents using the `getent` alias should not be affected; others should move from using `glibc.bin` or `getBin glibc` to `getent` (which also improves compatibility with non-glibc platforms). +# Release 23.11 (“Tapir”, 2023.11/29) {#sec-release-23.11} + +The NixOS release team is happy to announce a new version of NixOS. The release is called NixOS 23.11 ("Tapir"). + +NixOS is a Linux distribution, whose set of packages can also be used on other Linux systems and macOS. + +Support is planned until the end of June 2024, handing over to NixOS 24.05. + +To upgrade to the latest release, follow the upgrade chapter and check the [Breaking Changes](#sec-release-23.11-nixos-breaking-changes) +section for packages and services used in your configuration. + +The team is excited about the many software updates and improvements in this release. Just to name a few, do check the updates +for `GNOME` packages, `systemd`, `glibc`, the `ROCM` package set, and `hostapd` (which brings support for WiFi6 (IEEE 802.11ax) and WPA3-SAE-PK). + +Make sure to also check the many updates in the [Nixpkgs library](#sec-release-23.11-nixpkgs-lib) when developing your own packages. + +## Table of Contents {#sec-release-23.11-toc} + +- [NixOS](#sec-release-23.11-nixos) + - [Breaking Changes](#sec-release-23.11-nixos-breaking-changes) + - [New Services](#sec-release-23.11-nixos-new-services) + - [Other Notable Changes](#sec-release-23.11-nixos-notable-changes) +- [Nixpkgs Library Changes](#sec-release-23.11-nixpkgs-lib) + - [Breaking Changes](#sec-release-23.11-lib-breaking) + - [Additions and Improvements](#sec-release-23.11-lib-additions-improvements) + - [Deprecations](#sec-release-23.11-lib-deprecations) + +## NixOS {#sec-release-23.11-nixos} + + +### Breaking Changes {#sec-release-23.11-nixos-breaking-changes} + +- `services.postgresql.ensurePermissions` has been deprecated in favor of + `services.postgresql.ensureUsers.*.ensureDBOwnership` which simplifies the + setup of database owned by a certain system user in local database contexts + (which make use of peer authentication via UNIX sockets), migration + guidelines were provided in the NixOS manual, please refer to them if you are + affected by a PostgreSQL 15 changing the way `GRANT ALL PRIVILEGES` is + working. `services.postgresql.ensurePermissions` will be removed in 24.05. + All NixOS modules were migrated using one of the strategy, e.g. + `ensureDBOwnership` or `postStart`. Refer to the [PR + #266270](https://github.com/NixOS/nixpkgs/pull/266270) for more details. + +- `network-online.target` has been fixed to no longer time out for systems with + `networking.useDHCP = true` and `networking.useNetworkd = true`. Workarounds + for this can be removed. + +- The `boot.loader.raspberryPi` options have been marked deprecated, with + intent of removal for NixOS 24.11. They had a limited use-case, and do not + work like people expect. They required either very old installs from ([before + mid-2019](https://github.com/NixOS/nixpkgs/pull/62462)) or customized builds + out of scope of the standard and generic AArch64 support. That option set + never supported the Raspberry Pi 4 family of devices. + +- `python3.pkgs.sequoia` was removed in favor of `python3.pkgs.pysequoia`. The + latter package is based on upstream's dedicated repository for sequoia's + Python bindings, where the Python bindings from + [gitlab:sequoia-pgp/sequoia](https://gitlab.com/sequoia-pgp/sequoia) were + removed long ago. + +- `writeTextFile` requires `executable` to be boolean now, values like `null` + or `""` will fail to evaluate now. + +- The latest version of `clonehero` now stores custom content in + `~/.clonehero`. Refer to the [migration + instructions](https://clonehero.net/2022/11/29/v23-to-v1-migration-instructions.html) + for more details. Typically, these content files would exist along side the + binary, but the previous build used a wrapper script that would store them in + `~/.config/unity3d/srylain Inc_/Clone Hero`. + +- `services.mastodon` doesn't support providing a TCP port to its `streaming` + component anymore, as upstream implemented parallelization by running + multiple instances instead of running multiple processes in one instance. + Please create a PR if you are interested in this feature. + +- The `services.hostapd` module was rewritten to support `passwordFile` like + options, WPA3-SAE, and management of multiple interfaces. This breaks + compatibility with older configurations. + - `hostapd` is now started with additional systemd sandbox/hardening options + for better security. + - `services.hostapd.interface` was replaced with a per-radio and per-bss + configuration scheme using + [services.hostapd.radios](#opt-services.hostapd.radios). + - `services.hostapd.wpa` has been replaced by + [services.hostapd.radios.<name>.networks.<name>.authentication.wpaPassword](#opt-services.hostapd.radios._name_.networks._name_.authentication.wpaPassword) + and + [services.hostapd.radios.<name>.networks.<name>.authentication.saePasswords](#opt-services.hostapd.radios._name_.networks._name_.authentication.saePasswords) + which configure WPA2-PSK and WP3-SAE respectively. + - The default authentication has been changed to WPA3-SAE. Options for other + (legacy) schemes are still available. + +- `python3.pkgs.fetchPypi` and `python3Packages.fetchPypi` have been + deprecated in favor of top-level `fetchPypi`. + +- xdg-desktop-portal has been updated to 1.18, which reworked how portal + implementations are selected. If you roll your own desktop environment, you + should either set `xdg.portal.config` or `xdg.portal.configPackages`, which + allow fine-grained control over which portal backend to use for specific + interfaces, as described in {manpage}`portals.conf(5)`. + + If you don't provide configurations, a portal backend will only be considered + when the desktop you use matches its deprecated `UseIn` key. While some NixOS + desktop modules should already ship one for you, it is suggested to test + portal availability by trying [Door + Knocker](https://flathub.org/apps/xyz.tytanium.DoorKnocker) and [ASHPD + Demo](https://flathub.org/apps/com.belmoussaoui.ashpd.demo). If things + regressed, you may run `G_MESSAGES_DEBUG=all + /path/to/xdg-desktop-portal/libexec/xdg-desktop-portal` for ideas on which + config file and which portals are chosen. + +- `pass` now does not contain `password-store.el`. Users should get + `password-store.el` from Emacs lisp package set `emacs.pkgs.password-store`. + +- `services.knot` now supports `.settings` from RFC42. The previous + `.extraConfig` still works the same, but it displays a warning now. + +- `services.invoiceplane` now supports `.settings` from RFC42. The previous + `.extraConfig` still works the same way, but it displays a warning now. + +- `mu` does not install `mu4e` files by default now. Users should get `mu4e` + from Emacs lisp package set `emacs.pkgs.mu4e`. + +- `mariadb` now defaults to `mariadb_1011` instead of `mariadb_106`, meaning + the default version was upgraded from v10.6.x to v10.11.x. Refer to the + [upgrade + notes](https://mariadb.com/kb/en/upgrading-from-mariadb-10-6-to-mariadb-10-11/) + for potential issues. + +- `getent` has been moved from `glibc`'s `bin` output to its own dedicated + output, reducing closure size for many dependents. Dependents using the + `getent` alias should not be affected; others should move from using + `glibc.bin` or `getBin glibc` to `getent` (which also improves compatibility + with non-glibc platforms). - `maintainers/scripts/update-luarocks-packages` is now a proper package `luarocks-packages-updater` that can be run to maintain out-of-tree luarocks - packages + packages. -- The `users.users..passwordFile` has been renamed to `users.users..hashedPasswordFile` to avoid possible confusions. The option is in fact the file-based version of `hashedPassword`, not `password`, and expects a file containing the {manpage}`crypt(3)` hash of the user password. +- The `users.users..passwordFile` has been renamed to + `users.users..hashedPasswordFile` to avoid possible confusions. The + option is in fact the file-based version of `hashedPassword`, not `password`, + and expects a file containing the {manpage}`crypt(3)` hash of the user + password. -- `chromiumBeta` and `chromiumDev` have been removed due to the lack of maintenance in nixpkgs. Consider using `chromium` instead. +- `chromiumBeta` and `chromiumDev` have been removed due to the lack of + maintenance in nixpkgs. Consider using `chromium` instead. -- `google-chrome-beta` and `google-chrome-dev` have been removed due to the lack of maintenance in nixpkgs. Consider using `google-chrome` instead. +- `google-chrome-beta` and `google-chrome-dev` have been removed due to the + lack of maintenance in nixpkgs. Consider using `google-chrome` instead. -- The `services.ananicy.extraRules` option now has the type of `listOf attrs` instead of `string`. +- The `services.ananicy.extraRules` option now has the type of `listOf attrs` + instead of `string`. - `buildVimPluginFrom2Nix` has been renamed to `buildVimPlugin`, which now - now skips `configurePhase` and `buildPhase` + now skips `configurePhase` and `buildPhase`. -- JACK tools (`jack_*` except `jack_control`) have moved from the `jack2` package to `jack-example-tools` +- JACK tools (`jack_*` except `jack_control`) have moved from the `jack2` + package to `jack-example-tools`. -- The `waagent` service does provisioning now +- The `waagent` service does provisioning now. -- The `matrix-synapse` package & module have undergone some significant internal changes, for most setups no intervention is needed, though: - - The option [`services.matrix-synapse.package`](#opt-services.matrix-synapse.package) is now read-only. For modifying the package, use an overlay which modifies `matrix-synapse-unwrapped` instead. More on that below. - - The `enableSystemd` & `enableRedis` arguments have been removed and `matrix-synapse` has been renamed to `matrix-synapse-unwrapped`. Also, several optional dependencies (such as `psycopg2` or `authlib`) have been removed. - - These optional dependencies are automatically added via a wrapper (`pkgs.matrix-synapse.override { extras = ["redis"]; }` for `hiredis` & `txredisapi` for instance) if the relevant config section is declared in `services.matrix-synapse.settings`. For instance, if `services.matrix-synapse.settings.redis.enabled` is set to `true`, `"redis"` will be automatically added to the `extras` list of `pkgs.matrix-synapse`. - - A list of all extras (and the extras enabled by default) can be found at the [option's reference for `services.matrix-synapse.extras`](#opt-services.matrix-synapse.extras). - - In some cases (e.g. for running synapse workers) it was necessary to re-use the `PYTHONPATH` of `matrix-synapse.service`'s environment to have all plugins available. This isn't necessary anymore, instead `config.services.matrix-synapse.package` can be used as it points to the wrapper with properly configured `extras` and also all plugins defined via [`services.matrix-synapse.plugins`](#opt-services.matrix-synapse.plugins) available. This is also the reason for why the option is read-only now, it's supposed to be set by the module only. +- The `matrix-synapse` package & module have undergone some significant + internal changes, for most setups no intervention is needed, though: + - The option + [`services.matrix-synapse.package`](#opt-services.matrix-synapse.package) + is read-only now. For modifying the package, use an overlay which modifies + `matrix-synapse-unwrapped` instead. More on that below. + - The `enableSystemd` & `enableRedis` arguments have been removed and + `matrix-synapse` has been renamed to `matrix-synapse-unwrapped`. Also, + several optional dependencies (such as `psycopg2` or `authlib`) have been + removed. + - These optional dependencies are automatically added via a wrapper + (`pkgs.matrix-synapse.override { extras = ["redis"]; }` for `hiredis` & + `txredisapi` for instance) if the relevant config section is declared in + `services.matrix-synapse.settings`. For instance, if + `services.matrix-synapse.settings.redis.enabled` is set to `true`, + `"redis"` will be automatically added to the `extras` list of + `pkgs.matrix-synapse`. + - A list of all extras (and the extras enabled by default) can be found at + the [option's reference for + `services.matrix-synapse.extras`](#opt-services.matrix-synapse.extras). + - In some cases (e.g. for running synapse workers) it was necessary to re-use + the `PYTHONPATH` of `matrix-synapse.service`'s environment to have all + plugins available. This isn't necessary anymore, instead + `config.services.matrix-synapse.package` can be used as it points to the + wrapper with properly configured `extras` and also all plugins defined via + [`services.matrix-synapse.plugins`](#opt-services.matrix-synapse.plugins) + available. This is also the reason for why the option is read-only now, + it's supposed to be set by the module only. -- `netbox` was updated to 3.6. NixOS' `services.netbox.package` still defaults to 3.5 if `stateVersion` is earlier than 23.11. Please review upstream's breaking changes [for 3.6.0](https://github.com/netbox-community/netbox/releases/tag/v3.6.0) and upgrade NetBox by changing `services.netbox.package`. Database migrations will be run automatically. +- `netbox` was updated to v3.6. `services.netbox.package` still defaults + to v3.5 if `stateVersion` is earlier than 23.11. Refer to upstream's breaking + changes [for + v3.6.0](https://github.com/netbox-community/netbox/releases/tag/v3.6.0) and + upgrade NetBox by changing `services.netbox.package`. Database migrations + will be run automatically. -- `etcd` has been updated to 3.5, you will want to read the [3.3 to 3.4](https://etcd.io/docs/v3.5/upgrades/upgrade_3_4/) and [3.4 to 3.5](https://etcd.io/docs/v3.5/upgrades/upgrade_3_5/) upgrade guides +- `etcd` has been updated to v3.5. Refer to upgrade guides for [v3.3 to + v3.4](https://etcd.io/docs/v3.5/upgrades/upgrade_3_4/) and [v3.4 to + v3.5](https://etcd.io/docs/v3.5/upgrades/upgrade_3_5/) for more details. -- `gitlab` installations created or updated between versions \[15.11.0, 15.11.2] have an incorrect database schema. This will become a problem when upgrading to `gitlab` >=16.2.0. A workaround for affected users can be found in the [GitLab docs](https://docs.gitlab.com/ee/update/versions/gitlab_16_changes.html#undefined-column-error-upgrading-to-162-or-later). +- `gitlab` installations created or updated between versions \[15.11.0, + 15.11.2] have an incorrect database schema. This will become a problem when + upgrading to `gitlab` >=16.2.0. A workaround for affected users can be found + in the [GitLab + docs](https://docs.gitlab.com/ee/update/versions/gitlab_16_changes.html#undefined-column-error-upgrading-to-162-or-later). -- `consul` has been updated to `1.16.0`. See the [release note](https://github.com/hashicorp/consul/releases/tag/v1.16.0) for more details. Once a new Consul version has started and upgraded its data directory, it generally cannot be downgraded to the previous version. + +- `consul` has been updated to v1.16.0. Refer to the [release + note](https://github.com/hashicorp/consul/releases/tag/v1.16.0) for more + details. Once a new Consul version has started and upgraded it's data + directory, it generally cannot be downgraded to the previous version. - `llvmPackages_rocm` has been moved to `rocmPackages.llvm`. -- `hip`, `rocm-opencl-runtime`, `rocm-opencl-icd`, and `rocclr` have been combined into `rocmPackages.clr`. +- `hip`, `rocm-opencl-runtime`, `rocm-opencl-icd`, and `rocclr` have been + combined into `rocmPackages.clr`. - `clang-ocl`, `clr`, `composable_kernel`, `hipblas`, `hipcc`, `hip-common`, `hipcub`, `hipfft`, `hipfort`, `hipify`, `hipsolver`, `hipsparse`, `migraphx`, `miopen`, `miopengemm`, `rccl`, `rdc`, `rocalution`, `rocblas`, `rocdgbapi`, `rocfft`, `rocgdb`, `rocm-cmake`, `rocm-comgr`, `rocm-core`, `rocm-device-libs`, `rocminfo`, `rocmlir`, `rocm-runtime`, `rocm-smi`, `rocm-thunk`, `rocprim`, `rocprofiler`, `rocrand`, `rocr-debug-agent`, - `rocsolver`, `rocsparse`, `rocthrust`, `roctracer`, `rocwmma`, and `tensile` have been moved to `rocmPackages`. + `rocsolver`, `rocsparse`, `rocthrust`, `roctracer`, `rocwmma`, and `tensile` + have been moved to `rocmPackages`. -- `himalaya` has been updated to `0.8.0`, which drops the native TLS support (in favor of Rustls) and add OAuth 2.0 support. See the [release note](https://github.com/soywod/himalaya/releases/tag/v0.8.0) for more details. +- `himalaya` has been updated to v0.8.0, which drops the native TLS support + (in favor of Rustls) and add OAuth 2.0 support. Refer to the [release + note](https://github.com/soywod/himalaya/releases/tag/v0.8.0) for more + details. -- `nix-prefetch-git` now ignores global and user git config, to improve reproducibility. -- The [services.caddy.acmeCA](#opt-services.caddy.acmeCA) option now defaults to `null` instead of `"https://acme-v02.api.letsencrypt.org/directory"`, to use all of Caddy's default ACME CAs and enable Caddy's automatic issuer fallback feature by default, as recommended by upstream. +- `nix-prefetch-git` now ignores global and user git config, to improve + reproducibility. -- The default priorities of [`services.nextcloud.phpOptions`](#opt-services.nextcloud.phpOptions) have changed. This means that e.g. - `services.nextcloud.phpOptions."opcache.interned_strings_buffer" = "23";` doesn't discard all of the other defaults from this option - anymore. The attribute values of `phpOptions` are still defaults, these can be overridden as shown here. +- The [services.caddy.acmeCA](#opt-services.caddy.acmeCA) option defaults + to `null` instead of `"https://acme-v02.api.letsencrypt.org/directory"` now. + To use all of Caddy's default ACME CAs and enable Caddy's automatic issuer + fallback feature by default, as recommended by upstream. - To override all of the options (including including `upload_max_filesize`, `post_max_size` - and `memory_limit` which all point to [`services.nextcloud.maxUploadSize`](#opt-services.nextcloud.maxUploadSize) +- The default priorities of + [`services.nextcloud.phpOptions`](#opt-services.nextcloud.phpOptions) have + changed. This means that e.g. + `services.nextcloud.phpOptions."opcache.interned_strings_buffer" = "23";` + doesn't discard all of the other defaults from this option anymore. The + attribute values of `phpOptions` are still defaults, these can be overridden + as shown here. + + To override all of the options (including including `upload_max_filesize`, + `post_max_size` and `memory_limit` which all point to + [`services.nextcloud.maxUploadSize`](#opt-services.nextcloud.maxUploadSize) by default) can be done like this: ```nix @@ -267,172 +259,448 @@ } ``` -- `php80` is no longer supported due to upstream not supporting this version anymore. +- `php80` is no longer supported due to upstream not supporting this version + anymore. -- PHP now defaults to PHP 8.2, updated from 8.1. +- PHP defaults to PHP 8.2 now, updated from v8.1. -- GraalVM has been updated to the latest version, and this brings significant changes. Upstream don't release multiple versions targeting different JVMs anymore, so now we only have one GraalVM derivation (`graalvm-ce`). While at first glance the version may seem a downgrade (22.3.1 -> 21.0.0), the major version is now following the JVM it targets (so this latest version targets JVM 21). Also some products like `llvm-installable-svm` and `native-image-svm` were incorporate to the main GraalVM derivation, so they're included by default. +- GraalVM has been updated to the latest version, and this brings significant + changes. Upstream don't release multiple versions targeting different JVMs + anymore, so now we only have one GraalVM derivation (`graalvm-ce`). While at + first glance the version may seem a downgrade (v22.3.1 -> v21.0.0), the major + version is now following the JVM it targets (so this latest version targets + JVM 21). Also some products like `llvm-installable-svm` and + `native-image-svm` were incorporate to the main GraalVM derivation, so + they're included by default. -- GraalPy (`graalCEPackages.graalpy`), TruffleRuby (`graalCEPackages.truffleruby`), GraalJS (`graalCEPackages.graaljs`) and GraalNodeJS (`grallCEPackages.graalnodejs`) are now indepedent from the main GraalVM derivation. +- GraalPy (`graalCEPackages.graalpy`), TruffleRuby + (`graalCEPackages.truffleruby`), GraalJS (`graalCEPackages.graaljs`) and + GraalNodeJS (`grallCEPackages.graalnodejs`) are now independent from the main + GraalVM derivation. -- The ISC DHCP package and corresponding module have been removed, because they are end of life upstream. See https://www.isc.org/blogs/isc-dhcp-eol/ for details and switch to a different DHCP implementation like kea or dnsmasq. +- The ISC DHCP package and corresponding module have been removed, because they + are EOL upstream. Refer [to this + post](https://www.isc.org/blogs/isc-dhcp-eol/) for details and switch to a + different DHCP implementation like kea or dnsmasq. -- `prometheus-unbound-exporter` has been replaced by the Let's Encrypt maintained version, since the previous version was archived. This requires some changes to the module configuration, most notable `controlInterface` needs migration - towards `unbound.host` and requires either the `tcp://` or `unix://` URI scheme. +- `prometheus-unbound-exporter` has been replaced by the Let's Encrypt + maintained version, since the previous version was archived. This requires + some changes to the module configuration, most notable `controlInterface` + needs migration towards `unbound.host` and requires either the `tcp://` or + `unix://` URI scheme. -- `odoo` now defaults to 16, updated from 15. +- `odoo` defaults to v16 now, updated from v15. -- `varnish` was upgraded from 7.2.x to 7.4.x, see https://varnish-cache.org/docs/7.3/whats-new/upgrading-7.3.html and https://varnish-cache.org/docs/7.4/whats-new/upgrading-7.4.html for upgrade notes. The current LTS version is still offered as `varnish60`. +- `varnish` was upgraded from v7.2.x to v7.4.x. Refer to upgrade guides vor + [v7.3](https://varnish-cache.org/docs/7.3/whats-new/upgrading-7.3.html) and + [v7.4](https://varnish-cache.org/docs/7.4/whats-new/upgrading-7.4.html). The + current LTS version is still offered as `varnish60`. -- `util-linux` is now supported on Darwin and is no longer an alias to `unixtools`. Use the `unixtools.util-linux` package for access to the Apple variants of the utilities. +- `util-linux` is now supported on Darwin and is no longer an alias to + `unixtools`. Use the `unixtools.util-linux` package for access to the Apple + variants of the utilities. - `services.keyd` changed API. Now you can create multiple configuration files. -- `baloo`, the file indexer/search engine used by KDE now has a patch to prevent files from constantly being reindexed when the device ids of the their underlying storage changes. This happens frequently when using btrfs or LVM. The patch has not yet been accepted upstream but it provides a significantly improved experience. When upgrading, reset baloo to get a clean index: `balooctl disable ; balooctl purge ; balooctl enable`. +- `baloo`, the file indexer and search engine used by KDE now has a patch to + prevent files from constantly being reindexed when the device IDs of the + their underlying storage change. This happens frequently when using btrfs or + LVM. The patch has not yet been accepted upstream but it provides a + significantly improved experience. When upgrading, reset baloo to get a clean + index: `balooctl disable ; balooctl purge ; balooctl enable`. -- The `vlock` program from the `kbd` package has been moved into its own package output and should now be referenced explicitly as `kbd.vlock` or replaced with an alternative such as the standalone `vlock` package or `physlock`. +- The `vlock` program from the `kbd` package has been moved into its own + package output and should now be referenced explicitly as `kbd.vlock` or + replaced with an alternative such as the standalone `vlock` package or + `physlock`. -- `fileSystems..autoFormat` now uses `systemd-makefs`, which does not accept formatting options. Therefore, `fileSystems..formatOptions` has been removed. +- `fileSystems..autoFormat` now uses `systemd-makefs`, which does not + accept formatting options. Therefore, `fileSystems..formatOptions` has + been removed. -- `fileSystems..autoResize` now uses `systemd-growfs` to resize the file system online in stage 2. This means that `f2fs` and `ext2` can no longer be auto resized, while `xfs` and `btrfs` now can be. +- `fileSystems..autoResize` uses `systemd-growfs` to resize the file + system online in Stage 2 now. This means that `f2fs` and `ext2` can no longer + be auto resized, while `xfs` and `btrfs` now can be. -- `fuse3` has been updated from 3.11.0 to 3.16.2; see [ChangeLog.rst](https://github.com/libfuse/libfuse/blob/fuse-3.16.2/ChangeLog.rst#libfuse-3162-2023-10-10) for an overview of the changes. +- `fuse3` has been updated from v3.11.0 to v3.16.2. Refer to the + [changelog](https://github.com/libfuse/libfuse/blob/fuse-3.16.2/ChangeLog.rst#libfuse-3162-2023-10-10) + for an overview of the changes. - Unsupported mount options are no longer silently accepted [(since 3.15.0)](https://github.com/libfuse/libfuse/blob/fuse-3.16.2/ChangeLog.rst#libfuse-3150-2023-06-09). The [affected mount options](https://github.com/libfuse/libfuse/commit/dba6b3983af34f30de01cf532dff0b66f0ed6045) are: `atime`, `diratime`, `lazytime`, `nolazytime`, `relatime`, `norelatime`, `strictatime`. + Unsupported mount options are no longer silently accepted [(since + 3.15.0)](https://github.com/libfuse/libfuse/blob/fuse-3.16.2/ChangeLog.rst#libfuse-3150-2023-06-09). + The [affected mount + options](https://github.com/libfuse/libfuse/commit/dba6b3983af34f30de01cf532dff0b66f0ed6045) + are: `atime`, `diratime`, `lazytime`, `nolazytime`, `relatime`, `norelatime`, + `strictatime`. For example, ```bash - $ sshfs 127.0.0.1:/home/test/testdir /home/test/sshfs_mnt -o atime` + $ sshfs 127.0.0.1:/home/test/testdir /home/test/sshfs_mnt -o atime ``` - would previously terminate successfully with the mount point established, now it outputs the error message ``fuse: unknown option(s): `-o atime'`` and terminates with exit status 1. + would previously terminate successfully with the mount point established, now + it outputs the error message ``fuse: unknown option(s): `-o atime'`` and + terminates with exit status 1. -- `nixos-rebuild {switch,boot,test,dry-activate}` now runs the system activation inside `systemd-run`, creating an ephemeral systemd service and protecting the system switch against issues like network disconnections during remote (e.g. SSH) sessions. This has the side effect of running the switch in an isolated environment, that could possible break post-switch scripts that depends on things like environment variables being set. If you want to opt-out from this behavior for now, you may set the `NIXOS_SWITCH_USE_DIRTY_ENV` environment variable before running `nixos-rebuild`. However, keep in mind that this option will be removed in the future. +- `nixos-rebuild {switch,boot,test,dry-activate}` runs the system + activation inside `systemd-run` now, creating an ephemeral systemd service + and protecting the system switch against issues like network disconnections + during remote (e.g. SSH) sessions. This has the side effect of running the + switch in an isolated environment, that could possible break post-switch + scripts that depends on things like environment variables being set. If you + want to opt-out from this behavior for now, you may set the + `NIXOS_SWITCH_USE_DIRTY_ENV` environment variable before running + `nixos-rebuild`. However, keep in mind that this option will be removed in + the future. -- The `services.vaultwarden.config` option default value was changed to make Vaultwarden only listen on localhost, following the [secure defaults for most NixOS services](https://github.com/NixOS/nixpkgs/issues/100192). +- The `services.vaultwarden.config` option default value was changed to make + Vaultwarden only listen on localhost, following the [secure defaults for most + NixOS services](https://github.com/NixOS/nixpkgs/issues/100192). -- `services.lemmy.settings.federation` was removed in 0.17.0 and no longer has any effect. To enable federation, the hostname must be set in the configuration file and then federation must be enabled in the admin web UI. See the [release notes](https://github.com/LemmyNet/lemmy/blob/c32585b03429f0f76d1e4ff738786321a0a9df98/RELEASES.md#upgrade-instructions) for more details. +- `services.lemmy.settings.federation` was removed in v0.17.0 and no longer has + any effect. To enable federation, the hostname must be set in the + configuration file and then federation must be enabled in the admin web UI. + Refer to the [release + notes](https://github.com/LemmyNet/lemmy/blob/c32585b03429f0f76d1e4ff738786321a0a9df98/RELEASES.md#upgrade-instructions) + for more details. -- `pict-rs` was upgraded from 0.3 to 0.4 and contains an incompatible database & configuration change. To upgrade on systems with `stateVersion = "23.05";` or older follow the migration steps from https://git.asonix.dog/asonix/pict-rs#user-content-0-3-to-0-4-migration-guide and set `services.pict-rs.package = pkgs.pict-rs;`. +- `pict-rs` was upgraded from v0.3 to v0.4 and contains an incompatible database + & configuration change. To upgrade on systems with `stateVersion = "23.05";` + or older follow the migration steps from + https://git.asonix.dog/asonix/pict-rs#user-content-0-3-to-0-4-migration-guide + and set `services.pict-rs.package = pkgs.pict-rs;`. -- The following packages in `haskellPackages` have now a separate bin output: `cabal-fmt`, `calligraphy`, `eventlog2html`, `ghc-debug-brick`, `hindent`, `nixfmt`, `releaser`. This means you need to replace e.g. `"${pkgs.haskellPackages.nixfmt}/bin/nixfmt"` with `"${lib.getBin pkgs.haskellPackages.nixfmt}/bin/nixfmt"` or `"${lib.getExe pkgs.haskellPackages.nixfmt}"`. The binaries also won’t be in scope if you rely on them being installed e.g. via `ghcWithPackages`. `environment.packages` picks the `bin` output automatically, so for normal installation no intervention is required. Also, toplevel attributes like `pkgs.nixfmt` are not impacted negatively by this change. +- The following packages in `haskellPackages` have a separate bin output now: + `cabal-fmt`, `calligraphy`, `eventlog2html`, `ghc-debug-brick`, `hindent`, + `nixfmt`, `releaser`. This means you need to replace e.g. + `"${pkgs.haskellPackages.nixfmt}/bin/nixfmt"` with `"${lib.getBin + pkgs.haskellPackages.nixfmt}/bin/nixfmt"` or `"${lib.getExe + pkgs.haskellPackages.nixfmt}"`. The binaries also won’t be in scope if you + rely on them being installed e.g. via `ghcWithPackages`. + `environment.packages` picks the `bin` output automatically, so for normal + installation no intervention is required. Also, toplevel attributes like + `pkgs.nixfmt` are not impacted negatively by this change. -- `spamassassin` no longer supports the `Hashcash` module. The module needs to be removed from the `loadplugin` list if it was copied over from the default `initPreConf` option. +- `spamassassin` no longer supports the `Hashcash` module. The module needs to + be removed from the `loadplugin` list if it was copied over from the default + `initPreConf` option. -- `nano` was removed from `environment.defaultPackages`. To not leave systems without a editor, now `programs.nano.enable` is enabled by default. +- `nano` was removed from `environment.defaultPackages`. To not leave systems + without a editor, now `programs.nano.enable` is enabled by default. -- `programs.nano.nanorc` and `programs.nano.syntaxHighlight` no longer have an effect unless `programs.nano.enable` is set to true which is the default. +- `programs.nano.nanorc` and `programs.nano.syntaxHighlight` no longer have an + effect unless `programs.nano.enable` is set to true which is the default. -- `services.outline.sequelizeArguments` has been removed, as `outline` no longer executes database migrations via the `sequelize` cli. +- `services.outline.sequelizeArguments` has been removed, as `outline` no + longer executes database migrations via the `sequelize` cli. -- The binary of the package `cloud-sql-proxy` has changed from `cloud_sql_proxy` to `cloud-sql-proxy`. +- The binary of the package `cloud-sql-proxy` has changed from + `cloud_sql_proxy` to `cloud-sql-proxy`. -- The module `services.apache-kafka` was largely rewritten and has certain breaking changes. To be precise, this means that the following things have changed: +- The module `services.apache-kafka` was largely rewritten and has certain + breaking changes. To be precise, this means that the following things have + changed: + - Most settings have been migrated to + [services.apache-kafka.settings](#opt-services.apache-kafka.settings). + - Care must be taken when adapting an existing cluster to these changes, + see [](#module-services-apache-kafka-migrating-to-settings). + - By virtue of being less opinionated, it is now possible to use the module + to run Apache Kafka in KRaft mode instead of Zookeeper mode. + - [A few options](#module-services-apache-kafka-kraft) have been added to + assist in this mode. - - Most settings have been migrated to [services.apache-kafka.settings](#opt-services.apache-kafka.settings). - - Care must be taken when adapting an existing cluster to these changes, see [](#module-services-apache-kafka-migrating-to-settings). - - By virtue of being less opinionated, it is now possible to use the module to run Apache Kafka in KRaft mode instead of Zookeeper mode. - - [A few options](#module-services-apache-kafka-kraft) have been added to assist in this mode. +- Garage has been upgraded to v0.9.x. `services.garage.package` needs to be + explicitly set now, so version upgrades can be done in a controlled fashion. + For this, we expose `garage_x_y` attributes which can be set here. -- Garage has been upgraded to 0.9.x. `services.garage.package` now needs to be explicitly set, so version upgrades can be done in a controlled fashion. For this, we expose `garage_x_y` attributes which can be set here. +- `voms` and `xrootd` now moves the `$out/etc` content to the `$etc` output + instead of `$out/etc.orig`, when input argument `externalEtc` is not `null`. -- `voms` and `xrootd` now moves the `$out/etc` content to the `$etc` output instead of `$out/etc.orig`, when input argument `externalEtc` is not `null`. +- The `woodpecker-*` CI packages have been updated to v1.0.0. This release is + wildly incompatible with the v0.15.x versions that were previously packaged. + Refer to [upstream's + documentation](https://woodpecker-ci.org/docs/next/migrations#100) to learn + how to update your CI configurations. -- The `woodpecker-*` CI packages have been updated to 1.0.0. This release is wildly incompatible with the 0.15.X versions that were previously packaged. Please read [upstream's documentation](https://woodpecker-ci.org/docs/next/migrations#100) to learn how to update your CI configurations. +- Meilisearch was updated from v1.3.1 to v1.5.0. The update has breaking + changes about backslashes and filtering. Refer to the [release + announcement](https://blog.meilisearch.com/v1-4-release/) for more + details. -- Meilisearch was updated from 1.3.1 to 1.5.0. The update has breaking changes about backslashes and filtering. See the [release announcement](https://blog.meilisearch.com/v1-4-release/) for more information. +- The Caddy module gained a new option named `services.caddy.enableReload` + which is enabled by default. It allows reloading the service instead of + restarting it, if only a config file has changed. This option must be + disabled if you have turned off the [Caddy admin + API](https://caddyserver.com/docs/caddyfile/options#admin). If you keep this + option enabled, you should consider setting + [`grace_period`](https://caddyserver.com/docs/caddyfile/options#grace-period) + to a non-infinite value to prevent Caddy from delaying the reload + indefinitely. -- The Caddy module gained a new option named `services.caddy.enableReload` which is enabled by default. It allows reloading the service instead of restarting it, if only a config file has changed. This option must be disabled if you have turned off the [Caddy admin API](https://caddyserver.com/docs/caddyfile/options#admin). If you keep this option enabled, you should consider setting [`grace_period`](https://caddyserver.com/docs/caddyfile/options#grace-period) to a non-infinite value to prevent Caddy from delaying the reload indefinitely. +- mdraid support is optional now. This reduces initramfs size and prevents the + potentially undesired automatic detection and activation of software RAID + pools. It is disabled by default in new configurations (determined by + `stateVersion`), but the appropriate settings will be generated by + `nixos-generate-config` when installing to a software RAID device, so the + standard installation procedure should be unaffected. If you have custom + configs relying on mdraid, ensure that you use `stateVersion` correctly or + set `boot.swraid.enable` manually. On systems with an updated `stateVersion` + we now also emit warnings if `mdadm.conf` does not contain the minimum + required configuration necessary to run the dynamically enabled monitoring + daemons. -- mdraid support is now optional. This reduces initramfs size and prevents the potentially undesired automatic detection and activation of software RAID pools. It is disabled by default in new configurations (determined by `stateVersion`), but the appropriate settings will be generated by `nixos-generate-config` when installing to a software RAID device, so the standard installation procedure should be unaffected. If you have custom configs relying on mdraid, ensure that you use `stateVersion` correctly or set `boot.swraid.enable` manually. On systems with an updated `stateVersion` we now also emit warnings if `mdadm.conf` does not contain the minimum required configuration necessary to run the dynamically enabled monitoring daemons. +- The `go-ethereum` package has been updated to v1.12.0. This drops support for + proof-of-work. Its GraphQL API now encodes all numeric values as hex strings + and the GraphQL UI is updated to v2.0. The default database has changed from + `leveldb` to `pebble` but `leveldb` can be forced with the + --db.engine=leveldb flag. The `checkpoint-admin` command was [removed along + with trusted + checkpoints](https://github.com/ethereum/go-ethereum/pull/27147). -- The `go-ethereum` package has been updated to v1.12.0. This drops support for proof-of-work. Its GraphQL API now encodes all numeric values as hex strings and the GraphQL UI is updated to version 2.0. The default database has changed from `leveldb` to `pebble` but `leveldb` can be forced with the --db.engine=leveldb flag. The `checkpoint-admin` command was [removed along with trusted checkpoints](https://github.com/ethereum/go-ethereum/pull/27147). +- The `aseprite-unfree` package has been upgraded from v1.2.16.3 to v1.2.40. + The free version of aseprite has been dropped because it is EOL and the + package attribute now points to the unfree version. A maintained fork of the + last free version of Aseprite, named 'LibreSprite', is available in the + `libresprite` package. -- The `aseprite-unfree` package has been upgraded from 1.2.16.3 to 1.2.40. The free version of aseprite has been dropped because it is EOL and the package attribute now points to the unfree version. A maintained fork of the last free version of Aseprite, named 'LibreSprite', is available in the `libresprite` package. +- The default `kops` version is v1.28.0 now and support for v1.25 and older have + been dropped. -- The default `kops` version is now 1.28.0 and support for 1.25 and older has been dropped. +- `pharo` has been updated to latest stable v10.0.8, which is compatible with + the latest stable and oldstable images (Pharo 10 and 11). The VM in question + is the 64bit Spur. The 32bit version has been dropped due to lack of + maintenance. The Cog VM has been deleted because it is severily outdated. + Finally, the `pharo-launcher` package has been deleted because it was not + compatible with the newer VM, and due to lack of maintenance. -- `pharo` has been updated to latest stable (PharoVM 10.0.8), which is compatible with the latest stable and oldstable images (Pharo 10 and 11). The VM in question is the 64bit Spur. The 32bit version has been dropped due to lack of maintenance. The Cog VM has been deleted because it is severily outdated. Finally, the `pharo-launcher` package has been deleted because it was not compatible with the newer VM, and due to lack of maintenance. - -- Emacs mainline version 29 was introduced. This new version includes many major additions, most notably `tree-sitter` support (enabled by default) and the pgtk variant (useful for Wayland users), which is available under the attribute `emacs29-pgtk`. +- Emacs mainline v29 was introduced. This new version includes many major + additions, most notably `tree-sitter` support (enabled by default) and + the pgtk variant (useful for Wayland users), which is available under the + attribute `emacs29-pgtk`. - Emacs macport version 29 was introduced. -- The option `services.networking.networkmanager.enableFccUnlock` was removed in favor of `networking.networkmanager.fccUnlockScripts`, which allows specifying unlock scripts explicitly. The previous option enabled all unlock scripts bundled with ModemManager, which is risky, and didn't allow using vendor-provided unlock scripts at all. +- The option `services.networking.networkmanager.enableFccUnlock` was removed + in favor of `networking.networkmanager.fccUnlockScripts`, which allows + specifying unlock scripts explicitly. The previous option enabled all unlock + scripts bundled with ModemManager, which is risky, and didn't allow using + vendor-provided unlock scripts at all. -- The `html-proofer` package has been updated from major version 3 to major version 5, which includes [breaking changes](https://github.com/gjtorikian/html-proofer/blob/v5.0.8/UPGRADING.md). +- The `html-proofer` package has been updated from major version 3 to major + version 5, which includes [breaking + changes](https://github.com/gjtorikian/html-proofer/blob/v5.0.8/UPGRADING.md). -- `kratos` has been updated from 0.10.1 to the first stable version 1.0.0, please read the [0.10.1 to 0.11.0](https://github.com/ory/kratos/releases/tag/v0.11.0), [0.11.0 to 0.11.1](https://github.com/ory/kratos/releases/tag/v0.11.1), [0.11.1 to 0.13.0](https://github.com/ory/kratos/releases/tag/v0.13.0) and [0.13.0 to 1.0.0](https://github.com/ory/kratos/releases/tag/v1.0.0) upgrade guides. The most notable breaking change is the introduction of one-time passwords (`code`) and update of the default recovery strategy from `link` to `code`. +- `kratos` has been updated from v0.10.1 to the first stable v1.0.0, please + read the [v0.10.1 to + v0.11.0](https://github.com/ory/kratos/releases/tag/v0.11.0), [v0.11.0 to + v0.11.1](https://github.com/ory/kratos/releases/tag/v0.11.1), [v0.11.1 to + v0.13.0](https://github.com/ory/kratos/releases/tag/v0.13.0) and [v0.13.0 to + v1.0.0](https://github.com/ory/kratos/releases/tag/v1.0.0) upgrade guides. + The most notable breaking change is the introduction of one-time passwords + (`code`) and update of the default recovery strategy from `link` to `code`. -- The `hail` NixOS module was removed, as `hail` was unmaintained since 2017. +- The `hail` module was removed, as `hail` was unmaintained since 2017. -- Package `noto-fonts-emoji` was renamed to `noto-fonts-color-emoji`; - see [#221181](https://github.com/NixOS/nixpkgs/issues/221181). +- Package `noto-fonts-emoji` was renamed to `noto-fonts-color-emoji`. Refer to + [PR #221181](https://github.com/NixOS/nixpkgs/issues/221181) for more + details. -- Package `cloud-sql-proxy` was renamed to `google-cloud-sql-proxy` as it cannot be used with other cloud providers.; +- Package `cloud-sql-proxy` was renamed to `google-cloud-sql-proxy` as it + cannot be used with other cloud providers. -- The Yama LSM is now enabled by default in the kernel, which prevents ptracing non-child processes. - This means you will not be able to attach gdb to an existing process, but will need to start that process from gdb (so it is a child). - Or you can set `boot.kernel.sysctl."kernel.yama.ptrace_scope"` to 0. +- The Yama LSM is now enabled by default in the kernel, which prevents ptracing + non-child processes. This means you will not be able to attach gdb to an + existing process, but will need to start that process from gdb (so it is a + child). Or you can set `boot.kernel.sysctl."kernel.yama.ptrace_scope"` to 0. -- Package `pash` was removed due to being archived upstream. Use `powershell` as an alternative. +- Package `pash` was removed due to being archived upstream. Use `powershell` + as an alternative. -- The option `services.plausible.releaseCookiePath` has been removed: Plausible does not use any distributed Erlang features, and does not plan to (see [discussion](https://github.com/NixOS/nixpkgs/pull/130297#issuecomment-1805851333)), so NixOS now disables them, and the Erlang cookie becomes unnecessary. You may delete the file that `releaseCookiePath` was set to. +- The option `services.plausible.releaseCookiePath` has been removed. Plausible + does not use any distributed Erlang features, and does not plan to (refer to + [discussion](https://github.com/NixOS/nixpkgs/pull/130297#issuecomment-1805851333)), + Thus NixOS disables them now , and the Erlang cookie becomes unnecessary. You + may delete the file that `releaseCookiePath` was set to. -- `security.sudo.extraRules` now includes `root`'s default rule, with ordering +- `security.sudo.extraRules` includes `root`'s default rule now, with ordering priority 400. This is functionally identical for users not specifying rule order, or relying on `mkBefore` and `mkAfter`, but may impact users calling `mkOrder n` with n ≤ 400. -- X keyboard extension (XKB) options have been reorganized into a single attribute set, `services.xserver.xkb`. Specifically, `services.xserver.layout` is now `services.xserver.xkb.layout`, `services.xserver.extraLayouts` is now `services.xserver.xkb.extraLayouts`, `services.xserver.xkbModel` is now `services.xserver.xkb.model`, `services.xserver.xkbOptions` is now `services.xserver.xkb.options`, `services.xserver.xkbVariant` is now `services.xserver.xkb.variant`, and `services.xserver.xkbDir` is now `services.xserver.xkb.dir`. +- X keyboard extension (XKB) options have been reorganized into a single + attribute set, `services.xserver.xkb`. Specifically, + `services.xserver.layout` is `services.xserver.xkb.layout` now, + `services.xserver.extraLayouts` is `services.xserver.xkb.extraLayouts` now, + `services.xserver.xkbModel` is `services.xserver.xkb.model` now, + `services.xserver.xkbOptions` is `services.xserver.xkb.options` now , + `services.xserver.xkbVariant` is `services.xserver.xkb.variant` now, and + `services.xserver.xkbDir` is `services.xserver.xkb.dir` now. -- `networking.networkmanager.firewallBackend` was removed as NixOS is now using iptables-nftables-compat even when using iptables, therefore Networkmanager now uses the nftables backend unconditionally. +- `networking.networkmanager.firewallBackend` was removed as NixOS is now using + iptables-nftables-compat even when using iptables, therefore Networkmanager + uses the nftables backend unconditionally now. -- `rome` was removed because it is no longer maintained and is succeeded by `biome`. +- `rome` was removed because it is no longer maintained and is succeeded by + `biome`. -- The `prometheus-knot-exporter` was migrated to a version maintained by CZ.NIC. Various metric names have changed, so checking existing rules is recommended. +- The `prometheus-knot-exporter` was migrated to a version maintained by + CZ.NIC. Various metric names have changed, so checking existing rules is + recommended. -- The `services.mtr-exporter.target` has been removed in favor of `services.mtr-exporter.jobs` which allows specifying multiple targets. +- The `services.mtr-exporter.target` has been removed in favor of + `services.mtr-exporter.jobs` which allows specifying multiple targets. -- `blender-with-packages` has been deprecated in favor of `blender.withPackages`, for example `blender.withPackages (ps: [ps.bpycv])`. It behaves similarly to `python3.withPackages`. +- `blender-with-packages` has been deprecated in favor of + `blender.withPackages`, for example `blender.withPackages (ps: [ps.bpycv])`. + It behaves similarly to `python3.withPackages`. -- Setting `nixpkgs.config` options while providing an external `pkgs` instance will now raise an error instead of silently ignoring the options. NixOS modules no longer set `nixpkgs.config` to accomodate this. This specifically affects `services.locate`, `services.xserver.displayManager.lightdm.greeters.tiny` and `programs.firefox` NixOS modules. No manual intervention should be required in most cases, however, configurations relying on those modules affecting packages outside the system environment should switch to explicit overlays. +- Setting `nixpkgs.config` options while providing an external `pkgs` instance + will now raise an error instead of silently ignoring the options. NixOS + modules no longer set `nixpkgs.config` to accommodate this. This specifically + affects `services.locate`, + `services.xserver.displayManager.lightdm.greeters.tiny` and + `programs.firefox` NixOS modules. No manual intervention should be required + in most cases, however, configurations relying on those modules affecting + packages outside the system environment should switch to explicit overlays. -- `service.borgmatic.settings.location` and `services.borgmatic.configurations..location` are deprecated, please move your options out of sections to the global scope. +- `privacyidea` (and the corresponding `privacyidea-ldap-proxy`) has been + removed from nixpkgs because it has severely outdated dependencies that + became unmaintainable with nixpkgs' python package-set. -- `privacyidea` (and the corresponding `privacyidea-ldap-proxy`) has been removed from nixpkgs because it has severely outdated dependencies that became unmaintainable with nixpkgs' python package-set. - -- `dagger` was removed because using a package called `dagger` and packaging it from source violates their trademark policy. +- `dagger` was removed because using a package called `dagger` and packaging it + from source violates their trademark policy. - `win-virtio` package was renamed to `virtio-win` to be consistent with the upstream package name. -- `ps3netsrv` has been replaced with the webman-mod fork, the executable has been renamed from `ps3netsrv++` to `ps3netsrv` and cli parameters have changed. +- `ps3netsrv` has been replaced with the webman-mod fork, the executable has + been renamed from `ps3netsrv++` to `ps3netsrv` and cli parameters have + changed. -- `ssm-agent` package and module were renamed to `amazon-ssm-agent` to be consistent with the upstream package name. +- `ssm-agent` package and module were renamed to `amazon-ssm-agent` to be + consistent with the upstream package name. -- `services.kea.{ctrl-agent,dhcp-ddns,dhcp,dhcp6}` now use separate runtime directories instead of `/run/kea` to work around the runtime directory being cleared on service start. +- `services.kea.{ctrl-agent,dhcp-ddns,dhcp,dhcp6}` now use separate runtime + directories instead of `/run/kea` to work around the runtime directory being + cleared on service start. -- `mkDerivation` now rejects MD5 hashes. +- `mkDerivation` rejects MD5 hashes now. -- The `junicode` font package has been updated to [major version 2](https://github.com/psb1558/Junicode-font/releases/tag/v2.001), which is now a font family. In particular, plain `Junicode.ttf` no longer exists. In addition, TrueType font files are now placed in `font/truetype` instead of `font/junicode-ttf`; this change does not affect use via `fonts.packages` NixOS option. +- The `junicode` font package has been updated to [major + v2](https://github.com/psb1558/Junicode-font/releases/tag/v2.001), which is + a font family now. In particular, plain `Junicode.ttf` no longer exists. In + addition, TrueType font files are now placed in `font/truetype` instead of + `font/junicode-ttf`; this change does not affect use via `fonts.packages` + option. -- The `prayer` package as well as `services.prayer` have been removed because it's been unmaintained for several years and the author's website has vanished. +- The `prayer` package as well as `services.prayer` have been removed because + it's been unmaintained for several years and the author's website has + vanished. -- The `chrony` NixOS module now tracks the Real-Time Clock drift from the System Clock with `rtcfile` and automatically adjusts it with `rtcautotrim` when it exceeds the maximum error specified in `services.chrony.autotrimThreshold` (default 30 seconds). If you enabled `rtcsync` in `extraConfig`, you should remove RTC related options from `extraConfig`. If you do not want chrony configured to keep the RTC in check, you can set `services.chrony.enableRTCTrimming = false;` +- The `chrony` NixOS module now tracks the real-time clock drift from the + system clock with `rtcfile` and automatically adjusts it with `rtcautotrim` + when it exceeds the maximum error specified in + `services.chrony.autotrimThreshold` (defaults to 30 seconds). If you enabled + `rtcsync` in `extraConfig`, you should remove RTC related options from + `extraConfig`. If you do not want chrony configured to keep the RTC in check, + you can set `services.chrony.enableRTCTrimming = false;`. -- `trilium-desktop` and `trilium-server` have been updated to [v0.61](https://github.com/zadam/trilium/releases/tag/v0.61.12). For existing installations, upgrading to this version is supported only after running v0.60.X at least once. If you are still on an older version, make sure to update to v0.60 (available in NixOS 23.05) first and only then to v0.61 (available in NixOS 23.11). +- `trilium-desktop` and `trilium-server` have been updated to + [v0.61](https://github.com/zadam/trilium/releases/tag/v0.61.12). For existing + installations, upgrading to this version is supported only after running + v0.60.x at least once. If you are still on an older version, make sure to + update to v0.60 (available in NixOS 23.05) first and only then to v0.61 + (available in NixOS 23.11). -## Other Notable Changes {#sec-release-23.11-notable-changes} +- Cassandra now defaults to v4.x, updated from v3.11.x. -- A new option `system.switch.enable` was added. By default, this is option is - enabled. Disabling it makes the system unable to be reconfigured via - `nixos-rebuild`. This is good for image based appliances where updates are - handled outside the image. -- The Cinnamon module now enables XDG desktop integration by default. If you are experiencing collisions related to xdg-desktop-portal-gtk you can safely remove `xdg.portal.extraPortals = [ pkgs.xdg-desktop-portal-gtk ];` from your NixOS configuration. +- FoundationDB now defaults to major version 7. -- GNOME, Pantheon, Cinnamon module no longer forces Qt applications to use Adwaita style since it was buggy and is no longer maintained upstream (specifically, Cinnamon now defaults to the gtk2 style instead, following the default in Linux Mint). If you still want it, you can add the following options to your configuration but it will probably be eventually removed: +- [glibc](https://www.gnu.org/software/libc/) has been updated from v2.37 to + v2.38. Refer to the [the release + notes](https://sourceware.org/glibc/wiki/Release/2.38) for more details. + +- `linuxPackages_testing_bcachefs` is now soft-deprecated by + `linuxPackages_testing`. + - Please consider changing your NixOS configuration's `boot.kernelPackages` + to `linuxPackages_testing` until a stable kernel with bcachefs support is + released. + +- PostgreSQL now defaults to major version 15. + +- All [ROCm](https://rocm.docs.amd.com/en/latest/) packages have been updated + to v5.7.0. + - [ROCm](https://rocm.docs.amd.com/en/latest/) package attribute sets are + versioned: `rocmPackages` -> `rocmPackages_5`. + +- [systemd](https://systemd.io) has been updated from v253 to v254, refer to + [the release + notes](https://github.com/systemd/systemd/blob/v254/NEWS#L3-L659) for more + details. + - `boot.resumeDevice` **must be specified** when hibernating if not in EFI + mode. + - systemd may warn your system about the permissions of your ESP partition + (often `/boot`), this warning can be ignored for now, we are looking into + a satisfying solution regarding this problem. + - Updating with `nixos-rebuild boot` and rebooting is recommended, since in + some rare cases the `nixos-rebuild switch` into the new generation on a + live system might fail due to missing mount units. + +- If the user has a custom shell enabled via `users.users.${USERNAME}.shell = + ${CUSTOMSHELL}`, the assertion will require them to also set + `programs.${CUSTOMSHELL}.enable = true`. This is generally safe behavior, but + for anyone needing to opt out from the check + `users.users.${USERNAME}.ignoreShellProgramCheck = true` will do the job. + +- `yarn-berry` has been updated to v4.0.1. This means that NodeJS versions less + v18.12 are no longer supported by it. Refer to the [upstream + changelog](https://github.com/yarnpkg/berry/blob/master/CHANGELOG.md) for + more details. + +- GNOME has been updated to v45. Refer to the [release + notes](https://release.gnome.org/45/) for more details. Notably, Loupe has + replaced Eye of GNOME as the default image viewer, Snapshot has replaced + Cheese as the default camera application, and Photos will no longer be + installed. + +- The module [services.ankisyncd](#opt-services.ankisyncd.package) has been + switched to + [anki-sync-server-rs](https://github.com/ankicommunity/anki-sync-server-rs). + The former version written in Python was difficult to update, did not receive + updates in a while, and did not support recent versions of Anki. + + Unfortunately all servers supporting new clients do not support the older + sync protocol that was used in the old server. This includes newer version of + anki-sync-server, Anki's built in sync server and this new Rust package. Thus + old clients will also need updating. In particular nixpkgs's Anki package is + also being updated in this release. + + The module update takes care of the new config syntax. The data itself (i.e. + user login and card information) is compatible. Thus users of the module will + be able to simply log in again after updating both client and server without + any extra action needed to be taken. + +- The argument `vendorSha256` of `buildGoModule` is deprecated. Use + `vendorHash` instead. Refer to [PR + \#259999](https://github.com/NixOS/nixpkgs/pull/259999)) for more details. + +- `go-modules` in `buildGoModule` attrs has been renamed to `goModules`. + +- The package `cawbird` is dropped from nixpkgs. It broke by the Twitter API + closing down and has been abandoned upstream. + +- The Cinnamon module now enables XDG desktop integration by default. If you + are experiencing collisions related to xdg-desktop-portal-gtk you can safely + remove `xdg.portal.extraPortals = [ pkgs.xdg-desktop-portal-gtk ];` from your + NixOS configuration. + +- GNOME, Pantheon, Cinnamon modules no longer force Qt applications to use + Adwaita style. This implemantion was buggy and is no longer maintained + upstream. Specifically, Cinnamon defaults to the gtk2 style instead now, + following the default in Linux Mint). If you still want Adwaita used, you may + add the following options to your configuration. Please be aware, that it + will probably be removed eventually. ```nix qt = { @@ -442,162 +710,180 @@ }; ``` -- `fontconfig` now defaults to using greyscale antialiasing instead of subpixel antialiasing because of a [recommendation from one of the downstreams](https://gitlab.freedesktop.org/fontconfig/fontconfig/-/issues/337). You can change this value by configuring [](#opt-fonts.fontconfig.subpixel.rgba) accordingly. +- DocBook option documentation is no longer supported, all module documentation + now uses Markdown. -- The latest available version of Nextcloud is v27 (available as `pkgs.nextcloud27`). The installation logic is as follows: - - If [`services.nextcloud.package`](#opt-services.nextcloud.package) is specified explicitly, this package will be installed (**recommended**) - - If [`system.stateVersion`](#opt-system.stateVersion) is >=23.11, `pkgs.nextcloud27` will be installed by default. - - If [`system.stateVersion`](#opt-system.stateVersion) is >=23.05, `pkgs.nextcloud26` will be installed by default. - - Please note that an upgrade from v25 (or older) to v27 directly is not possible. Please upgrade to `nextcloud26` (or earlier) first. Nextcloud prohibits skipping major versions while upgrading. You can upgrade by declaring [`services.nextcloud.package = pkgs.nextcloud26;`](options.html#opt-services.nextcloud.package). +- Docker defaults to v24 now, as 20.10 is stopping to receive security updates + and bug fixes after [December 10, + 2023](https://github.com/moby/moby/discussions/45104). -- New options were added to `services.searx` for better SearXNG support, including options for the built-in rate limiter and bot protection and automatically configuring a local redis server. +- Elixir defaults to v1.15 now. Refer to their + [changelog](https://elixir-lang.org/blog/2023/06/19/elixir-v1-15-0-released/) + for more details. -- `jq` was updated to 1.7, its [first release in 5 years](https://github.com/jqlang/jq/releases/tag/jq-1.7). +- The `extend` function of `llvmPackages` has been removed due it coming from + the `tools` attrset thus only extending the `tool` attrset. A possible + replacement is to construct the set from `libraries` and `tools`, or patch + nixpkgs. -- `zfs` was updated from 2.1.x to 2.2.0, [enabling newer kernel support and adding new features](https://github.com/openzfs/zfs/releases/tag/zfs-2.2.0). +- `ffmpeg` defaults to `ffmpeg_6` now, upgrading from `ffmpeg_5`. -- The iptables firewall module now installs the `nixos-firewall-tool` which allows the user to easily temporarily open ports through the firewall. +- `fontconfig` defaults to using greyscale antialiasing now. Previously + subpixel antialiasing was used because of a [recommendation from one of the + downstreams](https://gitlab.freedesktop.org/fontconfig/fontconfig/-/issues/337). + You can change this value by configuring + [](#opt-fonts.fontconfig.subpixel.rgba) accordingly. -- Elixir now defaults to version - [v1.15](https://elixir-lang.org/blog/2023/06/19/elixir-v1-15-0-released/). +- The `fonts.fonts` and `fonts.enableDefaultFonts` options have been renamed to + `fonts.packages` and `fonts.enableDefaultPackages` respectively. -- A new option was added to the virtualisation module that enables specifying explicitly named network interfaces in QEMU VMs. The existing `virtualisation.vlans` is still supported for cases where the name of the network interface is irrelevant. +- `services.hedgedoc` has been heavily refactored, reducing the amount of + declared options in the module. Most of the options should still work without + any changes to the configuration. Some options have been deprecated, as they + no longer have any effect. Refer to [PR + #244941](https://github.com/NixOS/nixpkgs/pull/244941) for more details. -- Apptainer/Singularity now defaults to using `"$out/var/lib"` for the `LOCALSTATEDIR` configuration option instead of the top-level `"/var/lib"`. This change impacts the `SESSIONDIR` (container-run-time mount point) configuration, which is set to `$LOCALSTATEDIR//mnt/session`. This detaches the packages from the top-level directory, rendering the NixOS module optional. +- `jq` was updated to v1.7. This is its [first release in 5 + years](https://github.com/jqlang/jq/releases/tag/jq-1.7). - The default behavior of the NixOS module `programs.singularity` stays unchanged. We add a new option `programs.singularity.enableExternalSysConfDir` (default to `true`) to specify whether to set the top-level `"/var/lib"` as `LOCALSTATEDIR` or not. +- [`lib.attrsets.foldlAttrs`](https://nixos.org/manual/nixpkgs/stable#function-library-lib.attrsets.foldlAttrs) + now always evaluates the initial accumulator argument first. -- DocBook option documentation is no longer supported, all module documentation now uses markdown. +- [`lib.lists.foldl'`](https://nixos.org/manual/nixpkgs/stable#function-library-lib.lists.foldl-prime) + now always evaluates the initial accumulator argument first. If you depend on + the lazier behavior, consider using + [`lib.lists.foldl`](https://nixos.org/manual/nixpkgs/stable#function-library-lib.lists.foldl) + or + [`builtins.foldl'`](https://nixos.org/manual/nix/stable/language/builtins.html#builtins-foldl') + instead. -- `services.outline` can now be configured to use local filesystem storage instead of S3 storage using [services.outline.storage.storageType](#opt-services.outline.storage.storageType). +- Now `magma` defaults to `magma-hip` instead of `magma-cuda`. It also + respects the `config.cudaSupport` and `config.rocmSupport` options. -- `paperwork` was updated to version 2.2. Documents scanned with this version will not be visible to previous versions if you downgrade. See the [upstream announcement](https://forum.openpaper.work/t/paperwork-2-2-testing-phase/316#important-switch-from-jpeg-to-png-for-new-pages-2) for details and workarounds. - -- `buildGoModule` `go-modules` attrs have been renamed to `goModules`. - -- The `fonts.fonts` and `fonts.enableDefaultFonts` options have been renamed to `fonts.packages` and `fonts.enableDefaultPackages` respectively. - -- The `services.sslh` module has been updated to follow [RFC 0042](https://github.com/NixOS/rfcs/blob/master/rfcs/0042-config-option.md). As such, several options have been moved to the freeform attribute set [services.sslh.settings](#opt-services.sslh.settings), which allows to change any of the settings in {manpage}`sslh(8)`. - In addition, the newly added option [services.sslh.method](#opt-services.sslh.method) allows to switch between the {manpage}`fork(2)`, {manpage}`select(2)` and `libev`-based connection handling method; see the [sslh docs](https://github.com/yrutschle/sslh/blob/master/doc/INSTALL.md#binaries) for a comparison. - -- `pkgs.openvpn3` now optionally supports systemd-resolved. `programs.openvpn3` will automatically enable systemd-resolved support if `config.services.resolved.enable` is enabled. - -- `services.fail2ban.jails` can now be configured with attribute sets defining settings and filters instead of lines. The stringed options `daemonConfig` and `extraSettings` have respectively been replaced by `daemonSettings` and `jails.DEFAULT.settings` which use attribute sets. - -- The application firewall `opensnitch` now uses the process monitor method eBPF as default as recommended by upstream. The method can be changed with the setting [services.opensnitch.settings.ProcMonitorMethod](#opt-services.opensnitch.settings.ProcMonitorMethod). - -- `services.hedgedoc` has been heavily refactored, reducing the amount of declared options in the module. Most of the options should still work without any changes. Some options have been deprecated, as they no longer have any effect. See [#244941](https://github.com/NixOS/nixpkgs/pull/244941) for more details. - -- The [services.woodpecker-server](#opt-services.woodpecker-server.environmentFile) type was changed to list of paths to be more consistent to the woodpecker-agent module - -- The module [services.ankisyncd](#opt-services.ankisyncd.package) has been switched to [anki-sync-server-rs](https://github.com/ankicommunity/anki-sync-server-rs) from the old python version, which was difficult to update, had not been updated in a while, and did not support recent versions of anki. -Unfortunately all servers supporting new clients (newer version of anki-sync-server, anki's built in sync server and this new rust package) do not support the older sync protocol that was used in the old server, so such old clients will also need updating and in particular the anki package in nixpkgs is also being updated in this release. -The module update takes care of the new config syntax and the data itself (user login and cards) are compatible, so users of the module will be able to just log in again after updating both client and server without any extra action. - -- `services.matrix-synapse` has new options to configure worker processes for matrix-synapse using [`services.matrix-synapse.workers`](#opt-services.matrix-synapse.workers). It's also now possible to configure a local redis server using [`services.matrix-synapse.configureRedisLocally`](#opt-services.matrix-synapse.configureRedisLocally). - -- `services.nginx` gained a `defaultListen` option at server-level with support for PROXY protocol listeners, also `proxyProtocol` is now exposed in `services.nginx.virtualHosts..listen` option. It is now possible to run PROXY listeners and non-PROXY listeners at a server-level, see [#213510](https://github.com/NixOS/nixpkgs/pull/213510/) for more details. - -- `services.restic.backups` now adds wrapper scripts to your system path, which set the same environment variables as the service, so restic operations can easily be run from the command line. This behavior can be disabled by setting `createWrapper` to `false`, per backup configuration. - -- `services.prometheus.exporters` has a new exporter to monitor electrical power consumption based on PowercapRAPL sensor called [Scaphandre](https://github.com/hubblo-org/scaphandre), see [#239803](https://github.com/NixOS/nixpkgs/pull/239803) for more details. - -- The MariaDB C client library was upgraded from 3.2.x to 3.3.x. It is recommended to review the [upstream release notes](https://mariadb.com/kb/en/mariadb-connector-c-33-release-notes/). - -- The module `services.calibre-server` has new options to configure the `host`, `port`, `auth.enable`, `auth.mode` and `auth.userDb` path, see [#216497](https://github.com/NixOS/nixpkgs/pull/216497/) for more details. +- The MariaDB C client library was upgraded from v3.2.x to v3.3.x. Refer to the + [upstream release + notes](https://mariadb.com/kb/en/mariadb-connector-c-33-release-notes/) for + more details. - Mattermost has been upgraded to extended support version 8.1 as the previously - packaged extended support version 7.8 is [reaching end of life](https://docs.mattermost.com/upgrade/extended-support-release.html). - Migration may take some time, see the [changelog](https://docs.mattermost.com/install/self-managed-changelog.html#release-v8-1-extended-support-release) + packaged extended support version 7.8 is [reaching end-of-life](https://docs.mattermost.com/upgrade/extended-support-release.html). + Migration may take some time, refer to the [changelog](https://docs.mattermost.com/install/self-managed-changelog.html#release-v8-1-extended-support-release) and [important upgrade notes](https://docs.mattermost.com/upgrade/important-upgrade-notes.html). -- `services.prometheus.exporters` has a new [exporter](https://github.com/hipages/php-fpm_exporter) to monitor PHP-FPM processes, see [#240394](https://github.com/NixOS/nixpkgs/pull/240394) for more details. - -- `services.github-runner` / `services.github-runners.` gained the option `nodeRuntimes`. The option defaults to `[ "node20" ]`, i.e., the service supports Node.js 20 GitHub Actions only. The list of Node.js versions accepted by `nodeRuntimes` tracks the versions the upstream GitHub Actions runner supports. See [#249103](https://github.com/NixOS/nixpkgs/pull/249103) for details. - -- `programs.gnupg.agent.pinentryFlavor` is now set in `/etc/gnupg/gpg-agent.conf`, and will no longer take precedence over a `pinentry-program` set in `~/.gnupg/gpg-agent.conf`. - -- `programs.gnupg` now has the option `agent.settings` to set verbatim config values in `/etc/gnupg/gpg-agent.conf`. - -- `dockerTools.buildImage`, `dockerTools.buildLayeredImage` and `dockerTools.streamLayeredImage` now use `lib.makeOverridable` to allow `dockerTools`-based images to be customized more efficiently at the nix-level. - -- `services.influxdb2` now supports doing an automatic initial setup and provisioning of users, organizations, buckets and authentication tokens, see [#249502](https://github.com/NixOS/nixpkgs/pull/249502) for more details. - -- `wrapHelm` now exposes `passthru.pluginsDir` which can be passed to `helmfile`. For convenience, a top-level package `helmfile-wrapped` has been added, which inherits `passthru.pluginsDir` from `kubernetes-helm-wrapped`. See [#217768](https://github.com/NixOS/nixpkgs/issues/217768) for details. - -- `boot.initrd.network.udhcp.enable` allows control over dhcp during stage 1 regardless of what `networking.useDHCP` is set to. - -- Suricata was upgraded from 6.0 to 7.0 and no longer considers HTTP/2 support as experimental, see [upstream release notes](https://forum.suricata.io/t/suricata-7-0-0-released/3715) for more details. - -- Cloud support in the `netdata` package is now disabled by default. To enable it use the `netdataCloud` package. - -- `networking.nftables` now has the option `networking.nftables.table.` to create tables - and have them be updated atomically, instead of flushing the ruleset. +- The `netdata` package disables cloud support by default now. To enable it use the `netdataCloud` package. - `networking.nftables` is no longer flushing all rulesets on every reload. - Use `networking.nftables.flushRuleset = true;` to get back the old behaviour. - -- The `cawbird` package is dropped from nixpkgs, as it got broken by the Twitter API closing down and has been abandoned upstream. - -- `hardware.nvidia` gained `datacenter` options for enabling NVIDIA Data Center drivers and configuration of NVLink/NVSwitch topologies through `nv-fabricmanager`. - -- Certificate generation via the `security.acme` now limits the concurrent number of running certificate renewals and generation jobs, to avoid spiking resource usage when processing many certificates at once. The limit defaults to *5* and can be adjusted via `maxConcurrentRenewals`. Setting it to *0* disables the limits altogether. - -- New `boot.bcache.enable` (default enabled) allows completely removing `bcache` mount support. - -- The module `services.mbpfan` now has the option `aggressive` enabled by default for better heat moderation. You can disable it for upstream defaults. - -- `security.sudo` now provides two extra options, that do not change the - module's default behaviour: - - `defaultOptions` controls the options used for the default rules; - - `keepTerminfo` controls whether `TERMINFO` and `TERMINFO_DIRS` are preserved - for `root` and the `wheel` group. - -- `virtualisation.googleComputeImage` now provides `efi` option to support UEFI booting. - -- CoreDNS can now be built with external plugins by overriding `externalPlugins` and `vendorHash` arguments like this: - - ``` - services.coredns = { - enable = true; - package = pkgs.coredns.override { - externalPlugins = [ - {name = "fanout"; repo = "github.com/networkservicemesh/fanout"; version = "v1.9.1";} - ]; - vendorHash = ""; - }; - }; - ``` - - To get the necessary SRI hash, set `vendorHash = "";`. The build will fail and produce the correct `vendorHash` in the error message. - - If you use this feature, updates to CoreDNS may require updating `vendorHash` by following these steps again. - -- `postgresql_11` has been removed since it'll stop receiving fixes on November 9 2023. - -- `ffmpeg` default upgraded from `ffmpeg_5` to `ffmpeg_6`. - -- `fusuma` now enables the following plugins: [appmatcher](https://github.com/iberianpig/fusuma-plugin-appmatcher), [keypress](https://github.com/iberianpig/fusuma-plugin-keypress), [sendkey](https://github.com/iberianpig/fusuma-plugin-sendkey), [tap](https://github.com/iberianpig/fusuma-plugin-tap) and [wmctrl](https://github.com/iberianpig/fusuma-plugin-wmctrl). - -- `services.bitcoind` now properly respects the `enable` option. - -- The Home Assistant module now offers support for installing custom components and lovelace modules. Available at [`services.home-assistant.customComponents`](#opt-services.home-assistant.customComponents) and [`services.home-assistant.customLovelaceModules`](#opt-services.home-assistant.customLovelaceModules). - -- The argument `vendorSha256` of `buildGoModule` is deprecated. Use `vendorHash` instead. ([\#259999](https://github.com/NixOS/nixpkgs/pull/259999)) - -- TeX Live environments can now be built with the new `texlive.withPackages`. The procedure for creating custom TeX packages has been changed, see the [Nixpkgs manual](https://nixos.org/manual/nixpkgs/stable/#sec-language-texlive-custom-packages) for more details. - -- In `wxGTK32`, the webkit module `wxWebView` has been enabled on all builds; prior releases only enabled this on Darwin. - -## Nixpkgs internals {#sec-release-23.11-nixpkgs-internals} + Use `networking.nftables.flushRuleset = true;` to enable the previous behaviour. - Node.js v14, v16 has been removed as they were end of life. Any dependent packages that contributors were not able to reasonably upgrade were dropped after a month of notice to their maintainers, were **removed**. - This includes VSCode Server. - This includes Kibana 7 as the ELK stack is unmaintained in nixpkgs and is marked for slow removal. -- The use of `sourceRoot = "source";`, `sourceRoot = "source/subdir";`, and similar lines in package derivations using the default `unpackPhase` is deprecated as it requires `unpackPhase` to always produce a directory named "source". Use `sourceRoot = src.name`, `sourceRoot = "${src.name}/subdir";`, or `setSourceRoot = "sourceRoot=$(echo */subdir)";` or similar instead. +- The application firewall `opensnitch` uses the process monitor method eBPF as + default now. This is recommended by upstream. The method may be changed with + the setting + [services.opensnitch.settings.ProcMonitorMethod](#opt-services.opensnitch.settings.ProcMonitorMethod). -- The `django` alias in the python package set was upgraded to Django 4.x. +- `paperwork` is updated to v2.2. Documents scanned with this version will not + be visible to previous versions if you downgrade. Refer to the [upstream + announcement](https://forum.openpaper.work/t/paperwork-2-2-testing-phase/316#important-switch-from-jpeg-to-png-for-new-pages-2) + for details and workarounds. + +- The latest available version of Nextcloud is v27 (available as + `pkgs.nextcloud27`). The installation logic is as follows: + - If [`services.nextcloud.package`](#opt-services.nextcloud.package) is + specified explicitly, this package will be installed (**recommended**) + - If [`system.stateVersion`](#opt-system.stateVersion) is >=23.11, + `pkgs.nextcloud27` will be installed by default. + - If [`system.stateVersion`](#opt-system.stateVersion) is >=23.05, + `pkgs.nextcloud26` will be installed by default. + - Please note that an upgrade from v25 (or older) to v27 is not possible + directly. Please upgrade to `nextcloud26` (or earlier) first. Nextcloud + prohibits skipping major versions while upgrading. You may upgrade by + declaring [`services.nextcloud.package = + pkgs.nextcloud26;`](options.html#opt-services.nextcloud.package) inbetween. + +- `postgresql_11` has been removed since it'll stop receiving fixes on November + 9th 2023. + +- `programs.gnupg.agent.pinentryFlavor` is set in `/etc/gnupg/gpg-agent.conf` + now. It will no longer take precedence over a `pinentry-program` set in + `~/.gnupg/gpg-agent.conf`. + +- `python3.pkgs.flitBuildHook` has been removed. Use `flit-core` and `format = + "pyproject"` instead. + +- Certificate generation via the `security.acme` limits the concurrent number + of running certificate renewals and generation jobs now. This is to avoid + spiking resource usage when processing many certificates at once. The limit + defaults to *5* and can be adjusted via `maxConcurrentRenewals`. Setting the + value to *0* disables the limits altogether. + +- `services.borgmatic.settings.location` and + `services.borgmatic.configurations..location` are deprecated, please + move your options out of sections to the global scope. + +- `services.fail2ban.jails` can be configured with attribute sets now, defining + settings and filters instead of lines. The stringed options `daemonConfig` + and `extraSettings` have respectively been replaced by `daemonSettings` and + `jails.DEFAULT.settings`. Those use attribute sets. + +- The `services.mbpfan` module has the option `aggressive` enabled by default + now. This is for better heat moderation. To get the upstream defaults you may + disable this. + +- Apptainer/Singularity defaults to using `"$out/var/lib"` for the + `LOCALSTATEDIR` configuration option instead of the top-level `"/var/lib"` + now. This change impacts the `SESSIONDIR` (container-run-time mount point) + configuration, which is set to `$LOCALSTATEDIR//mnt/session`. This detaches the packages from the top-level + directory, rendering the NixOS module optional. + + The default behavior of the NixOS module `programs.singularity` stays + unchanged. We add a new option + `programs.singularity.enableExternalSysConfDir` (default to `true`) to + specify whether to set the top-level `"/var/lib"` as `LOCALSTATEDIR` or not. + +- The `services.sslh` module has been updated to follow [RFC + 0042](https://github.com/NixOS/rfcs/blob/master/rfcs/0042-config-option.md). + As such, several options have been moved to the freeform attribute set + [services.sslh.settings](#opt-services.sslh.settings), which allows to change + any of the settings in {manpage}`sslh(8)`. + + In addition, the newly added option + [services.sslh.method](#opt-services.sslh.method) allows to switch between + the {manpage}`fork(2)`, {manpage}`select(2)` and `libev`-based connection + handling method. Refer to the [sslh + docs](https://github.com/yrutschle/sslh/blob/master/doc/INSTALL.md#binaries) + for a comparison. + +- Suricata was upgraded from v6.0 to v7.0 and no longer considers HTTP/2 + support as experimental. Refer to [upstream release + notes](https://forum.suricata.io/t/suricata-7-0-0-released/3715) for more + details. + +- `teleport` has been upgraded from major version 12 to major version 14. + Refer to upstream [upgrade + instructions](https://goteleport.com/docs/management/operations/upgrading/) + and release notes for + [v13](https://goteleport.com/docs/changelog/#1300-050823) and + [v14](https://goteleport.com/docs/changelog/#1400-092023). Note that Teleport + does not officially support upgrades across more than one major version at a + time. If you're running Teleport server components, it is recommended to + first upgrade to an intermediate v13.x version by setting + `services.teleport.package = pkgs.teleport_13`. Afterwards, this option can + be removed to upgrade to the default version (14). + +- `zfs` was updated from v2.1.x to v2.2.0, [enabling newer kernel support and + adding new features](https://github.com/openzfs/zfs/releases/tag/zfs-2.2.0). + +- The use of `sourceRoot = "source";`, `sourceRoot = "source/subdir";`, and + similar lines in package derivations using the default `unpackPhase` is + deprecated as it requires `unpackPhase` to always produce a directory named + "source". Use `sourceRoot = src.name`, `sourceRoot = "${src.name}/subdir";`, + or `setSourceRoot = "sourceRoot=$(echo */subdir)";` or similar instead. + +- The `django` alias in the python package set was upgraded to Django v4.x. Applications that consume Django should always pin their python environment to a compatible major version, so they can move at their own pace. @@ -621,12 +907,405 @@ The module update takes care of the new config syntax and the data itself (user can automatically format the root device by setting `virtualisation.fileSystems."/".autoFormat = true;`. -- `python3.pkgs.flitBuildHook` has been removed. Use `flit-core` and `format = "pyproject"` instead. +- The `electron` packages places its application files in + `$out/libexec/electron` instead of `$out/lib/electron` now. Packages using + electron-builder will fail to build and need to be adjusted by changing `lib` + to `libexec`. -- Now `magma` defaults to `magma-hip` instead of `magma-cuda`. It also - respects the `config.cudaSupport` and `config.rocmSupport` options. +### New Services {#sec-release-23.11-nixos-new-services} -- The `extend` function of `llvmPackages` has been removed due it coming from the `tools` attrset thus only extending the `tool` attrset. A possible replacement is to construct the set from `libraries` and `tools`, or patch nixpkgs. +- [MCHPRS](https://github.com/MCHPR/MCHPRS), a multithreaded Minecraft server + built for redstone. Available as + [services.mchprs](#opt-services.mchprs.enable). + +- [acme-dns](https://github.com/joohoi/acme-dns), a limited DNS server to + handle ACME DNS challenges easily and securely. Available as + [services.acme-dns](#opt-services.acme-dns.enable). + +- [frp](https://github.com/fatedier/frp), a fast reverse proxy to help you + expose a local server behind a NAT or firewall to the Internet. Available as + [services.frp](#opt-services.frp.enable). + +- [river](https://github.com/riverwm/river), A dynamic tiling wayland + compositor. Available as [programs.river](#opt-programs.river.enable). + +- [wayfire](https://wayfire.org), a modular and extensible wayland compositor. + Available as [programs.wayfire](#opt-programs.wayfire.enable). + +- [mautrix-whatsapp](https://docs.mau.fi/bridges/go/whatsapp/index.html), a + Matrix-WhatsApp puppeting bridge. Available as + [services.mautrix-whatsapp](#opt-services.mautrix-whatsapp.enable). + +- [hddfancontrol](https://github.com/desbma/hddfancontrol), a service to + regulate fan speeds based on hard drive temperature. Available as + [services.hddfancontrol](#opt-services.hddfancontrol.enable). + +- [seatd](https://sr.ht/~kennylevinsen/seatd/), A minimal seat management + daemon. Available as [services.seatd](#opt-services.seatd.enable). + +- [GoToSocial](https://gotosocial.org/), an ActivityPub social network server + written in Golang. Available as + [services.gotosocial](#opt-services.gotosocial.enable). + +- [Castopod](https://castopod.org/), an open-source hosting platform made for + podcasters who want to engage and interact with their audience. Available as + [services.castopod](#opt-services.castopod.enable). + +- [Typesense](https://github.com/typesense/typesense), a fast, typo-tolerant + search engine for building delightful search experiences. Available as + [services.typesense](#opt-services.typesense.enable). + +* [NS-USBLoader](https://github.com/developersu/ns-usbloader/), an all-in-one + tool for managing Nintendo Switch homebrew. Available as + [programs.ns-usbloader](#opt-programs.ns-usbloader.enable). + +- [athens](https://github.com/gomods/athens), a Go module datastore and proxy. Available as [services.athens](#opt-services.athens.enable). + +- [Mobilizon](https://joinmobilizon.org/), a Fediverse platform for publishing + events. Available as [services.mobilizon](#opt-services.mobilizon.enable). + +- [Anuko Time Tracker](https://github.com/anuko/timetracker), a simple, easy to + use, open source time tracking system. Available as + [services.anuko-time-tracker](#opt-services.anuko-time-tracker.enable). + +- [Prometheus MySQL exporter](https://github.com/prometheus/mysqld_exporter), a + MySQL server exporter for Prometheus. Available as + [services.prometheus.exporters.mysqld](#opt-services.prometheus.exporters.mysqld.enable). + +- [LibreNMS](https://www.librenms.org), a auto-discovering PHP/MySQL/SNMP based + network monitoring. Available as + [services.librenms](#opt-services.librenms.enable). + +- [Livebook](https://livebook.dev/), an interactive notebook with support for + Elixir, graphs, machine learning, and more. Available as + [services.livebook](#opt-services.livebook.enableUserService). + +- [sitespeed-io](https://sitespeed.io), a tool that can generate metrics such + as timings and diagnostics for websites. Available as + [services.sitespeed-io](#opt-services.sitespeed-io.enable). + +- [stalwart-mail](https://stalw.art), an all-in-one email server (SMTP, IMAP, + JMAP). Available as + [services.stalwart-mail](#opt-services.stalwart-mail.enable). + + +- [tang](https://github.com/latchset/tang), a server for binding data to + network presence. Available as [services.tang](#opt-services.tang.enable). + +- [Jool](https://nicmx.github.io/Jool/en/index.html), a kernelspace NAT64 and + SIIT implementation providing translation between IPv4 and IPv6. Available as + [networking.jool.enable](#opt-networking.jool.enable). + +- [Home Assistant + Satellite](https://github.com/synesthesiam/homeassistant-satellite), a + streaming audio satellite for Home Assistant voice pipelines, where you can + reuse existing mic and speaker hardware. Available as + [services.homeassistant-satellite](#opt-services.homeassistant-satellite.enable). + +- [Apache Guacamole](https://guacamole.apache.org/), a cross-platform, + clientless remote desktop gateway. Available as + [services.guacamole-server](#opt-services.guacamole-server.enable) and + [services.guacamole-client](#opt-services.guacamole-client.enable) services. + +- [pgBouncer](https://www.pgbouncer.org), a PostgreSQL connection pooler. + Available as [services.pgbouncer](#opt-services.pgbouncer.enable). + +- [Goss](https://goss.rocks/), a YAML based serverspec alternative tool for + validating a server's configuration. Available as + [services.goss](#opt-services.goss.enable). + +- [trust-dns](https://trust-dns.org/), a Rust based DNS server built to be safe + and secure from the ground up. Available as + [services.trust-dns](#opt-services.trust-dns.enable). + +- [osquery](https://www.osquery.io/), a SQL powered operating system + instrumentation, monitoring, and analytics. Available as + [services.osquery](#opt-services.osquery.enable). + +- [ebusd](https://ebusd.eu), a daemon for handling communication with eBUS + devices connected to a 2-wire bus system ("energy bus" used by numerous + heating systems). Available as [services.ebusd](#opt-services.ebusd.enable). + +- [systemd-sysupdate](https://www.freedesktop.org/software/systemd/man/systemd-sysupdate.html), + atomically updates the host OS, container images, portable service images or + other sources. Available as [systemd.sysupdate](opt-systemd.sysupdate). + +- [eris-server](https://codeberg.org/eris/eris-go), an implementation of the + Encoding for Robust Immutable Storage (ERIS). Available as + [services.eris-server](#opt-services.eris-server.enable). + +- [forgejo](https://forgejo.org/), a git forge and drop-in replacement for + Gitea. Available as [services.forgejo](#opt-services.forgejo.enable). + +- `hardware/infiniband.nix` adds infiniband subnet manager support using an + [opensm](https://github.com/linux-rdma/opensm) systemd-template service, + instantiated on card guids. The module also adds kernel modules and cli + tooling to help administrators debug and measure performance. Available as + [hardware.infiniband.enable](#opt-hardware.infiniband.enable). + +- [zwave-js](https://github.com/zwave-js/zwave-js-server), a small server + wrapper around Z-Wave JS to access it via a WebSocket. Available as + [services.zwave-js](#opt-services.zwave-js.enable). + +- [Honk](https://humungus.tedunangst.com/r/honk), a complete ActivityPub server + with minimal setup and support costs. Available as + [services.honk](#opt-services.honk.enable). + +- [ferretdb](https://www.ferretdb.io/), an open-source proxy, converting the + MongoDB 6.0+ wire protocol queries to PostgreSQL or SQLite. Available as + [services.ferretdb](options.html#opt-services.ferretdb.enable). + +- [MicroBin](https://microbin.eu/), a feature rich, performant and secure text + and file sharing web application, a "paste bin". Available as + [services.microbin](#opt-services.microbin.enable). + +- [NNCP](http://www.nncpgo.org/), nncp-daemon and nncp-caller services. + Available as [programs.nncp.settings](#opt-programs.nncp.settings) and + [services.nncp](#opt-services.nncp.caller.enable). + +- [FastNetMon Advanced](https://fastnetmon.com/product-overview/), a commercial + high performance DDoS detector and sensor. Available as + [services.fastnetmon-advanced](#opt-services.fastnetmon-advanced.enable). + +- [tuxedo-rs](https://github.com/AaronErhardt/tuxedo-rs), Rust utilities for + interacting with hardware from TUXEDO Computers. Available as + [hardware.tuxedo-rs](#opt-hardware.tuxedo-rs.enable). + +- [certspotter](https://github.com/SSLMate/certspotter), a certificate + transparency log monitor. Available as + [services.certspotter](#opt-services.certspotter.enable). + +- [audiobookshelf](https://github.com/advplyr/audiobookshelf/), a self-hosted + audiobook and podcast server. Available as + [services.audiobookshelf](#opt-services.audiobookshelf.enable). + +- [ZITADEL](https://zitadel.com), a turnkey identity and access management + platform. Available as [services.zitadel](#opt-services.zitadel.enable). + +- [exportarr](https://github.com/onedr0p/exportarr), Prometheus Exporters for + Bazarr, Lidarr, Prowlarr, Radarr, Readarr, and Sonarr. Available as + [services.prometheus.exporters.exportarr-bazarr](#opt-services.prometheus.exporters.exportarr-bazarr.enable)/[services.prometheus.exporters.exportarr-lidarr](#opt-services.prometheus.exporters.exportarr-lidarr.enable)/[services.prometheus.exporters.exportarr-prowlarr](#opt-services.prometheus.exporters.exportarr-prowlarr.enable)/[services.prometheus.exporters.exportarr-radarr](#opt-services.prometheus.exporters.exportarr-radarr.enable)/[services.prometheus.exporters.exportarr-readarr](#opt-services.prometheus.exporters.exportarr-readarr.enable)/[services.prometheus.exporters.exportarr-sonarr](#opt-services.prometheus.exporters.exportarr-sonarr.enable). + +- [netclient](https://github.com/gravitl/netclient), an automated WireGuard + Management Client. Available as + [services.netclient](#opt-services.netclient.enable). + +- [trunk-ng](https://github.com/ctron/trunk), A fork of `trunk`: Build, bundle + & ship your Rust WASM application to the web + +- [virt-manager](https://virt-manager.org/), an UI for managing virtual + machines in libvirt. Available as + [programs.virt-manager](#opt-programs.virt-manager.enable). + +- [Soft Serve](https://github.com/charmbracelet/soft-serve), a tasty, + self-hostable Git server for the command line. Available as + [services.soft-serve](#opt-services.soft-serve.enable). + +- [Rosenpass](https://rosenpass.eu/), a service for post-quantum-secure VPNs + with WireGuard. Available as + [services.rosenpass](#opt-services.rosenpass.enable). + +- [c2FmZQ](https://github.com/c2FmZQ/c2FmZQ/), an application that can securely + encrypt, store, and share files, including but not limited to pictures and + videos. Available as + [services.c2fmzq-server](#opt-services.c2fmzq-server.enable). + +- [preload](http://sourceforge.net/projects/preload), a service that makes + applications run faster by prefetching binaries and shared objects. + Available as [services.preload](#opt-services.preload.enable). + +### Other Notable Changes {#sec-release-23.11-nixos-notable-changes} + +- The new option `system.switch.enable` was added. It is enabled by default. + Disabling it makes the system unable to be reconfigured via `nixos-rebuild`. + This is of advantage for image based appliances where updates are handled + outside the image. + +- `services.searx` receives new options for better SearXNG support. This + includes options for the built-in rate limiter, bot protection and + automatically configuring a local Redis server. + +- The iptables firewall module installs the `nixos-firewall-tool` now which + allows the user to easily temporarily open ports through the firewall. + +- A new option was added to the virtualisation module that enables specifying + explicitly named network interfaces in QEMU VMs. The existing + `virtualisation.vlans` is still supported for cases where the name of the + network interface is irrelevant. + +- `services.outline` can be configured to use local filesystem storage now. + Previously ony S3 storage was possible. This may be set using + [services.outline.storage.storageType](#opt-services.outline.storage.storageType). + +- `pkgs.openvpn3` optionally supports systemd-resolved now. `programs.openvpn3` + will automatically enable systemd-resolved support if + [services.resolved.enable](#opt-services.resolved.enable) is set to true. + +- The + [services.woodpecker-server.environmentFile](#opt-services.woodpecker-server.environmentFile) + type was changed to list of paths to be more consistent to the + woodpecker-agent module + +- `services.matrix-synapse` has new options to configure worker processes for + matrix-synapse using + [`services.matrix-synapse.workers`](#opt-services.matrix-synapse.workers). + Configuring a local redis server using + [`services.matrix-synapse.configureRedisLocally`](#opt-services.matrix-synapse.configureRedisLocally) + is also possible now. + +- The `services.nginx` module gained a `defaultListen` option at server-level + with support for PROXY protocol listeners. Also `proxyProtocol` is exposed in + the `services.nginx.virtualHosts..listen` option now. This it is + possible to run PROXY listeners and non-PROXY listeners at a server-level. + Refer to [PR #213510](https://github.com/NixOS/nixpkgs/pull/213510/) for more + details. + +- `services.restic.backups` adds wrapper scripts to your system path now. This + wrapper script sets the same environment variables as the service, so restic + operations can easily be run from the command line. This behavior can be + disabled by setting `createWrapper` to `false`, for each backup + configuration. + +- `services.prometheus.exporters` has a new exporter to monitor electrical + power consumption based on PowercapRAPL sensor called + [Scaphandre](https://github.com/hubblo-org/scaphandre). Refer to [PR + #239803](https://github.com/NixOS/nixpkgs/pull/239803) for more details. + +- The `services.calibre-server` module has new options to configure the `host`, + `port`, `auth.enable`, `auth.mode` and `auth.userDb` path. Refer to [PR + #216497](https://github.com/NixOS/nixpkgs/pull/216497/) for more details. + +- `services.prometheus.exporters` has a new + [exporter](https://github.com/hipages/php-fpm_exporter) to monitor PHP-FPM + processes. Refer to [PR + #240394](https://github.com/NixOS/nixpkgs/pull/240394) for more details. + +- `services.github-runner` and `services.github-runners.` gained the + option `nodeRuntimes`. This option defaults to `[ "node20" ]`. I.e., the + service supports Node.js 20 GitHub Actions only. The list of Node.js versions + accepted by `nodeRuntimes` tracks the versions the upstream GitHub Actions + runner supports. Refer to [PR + #249103](https://github.com/NixOS/nixpkgs/pull/249103) for details. + +- `programs.gnupg` has the option `agent.settings` now. This allows setting + verbatim config values in `/etc/gnupg/gpg-agent.conf`. + +- `dockerTools.buildImage`, `dockerTools.buildLayeredImage` and + `dockerTools.streamLayeredImage` use `lib.makeOverridable` now . This allows + `dockerTools`-based images to be customized more efficiently at the Nix + level. + +- `services.influxdb2` supports doing an automatic initial setup and + provisioning of users, organizations, buckets and authentication tokens now. + Refer to [PR #249502](https://github.com/NixOS/nixpkgs/pull/249502) for more + details. + +- `wrapHelm` exposes `passthru.pluginsDir` now which can be passed to + `helmfile`. For convenience, a top-level package `helmfile-wrapped` has been + added, which inherits `passthru.pluginsDir` from `kubernetes-helm-wrapped`. + Refer to [PR #217768](https://github.com/NixOS/nixpkgs/issues/217768) for + more details. + +- The `boot.initrd.network.udhcp.enable` option allows control over DHCP during + Stage 1 regardless of what `networking.useDHCP` is set to. + +- `networking.nftables` has the option `networking.nftables.table.
` now. This creates tables + and have them be updated atomically, instead of flushing the ruleset. + +- `hardware.nvidia` gained `datacenter` options for enabling NVIDIA Data Center + drivers and configuration of NVLink/NVSwitch topologies through + `nv-fabricmanager`. + +- The new `boot.bcache.enable` option allows completely removing `bcache` + mount support. It is enabled by default. + +- `security.sudo` provides two extra options now, while not changing the + module's default behaviour: + - `defaultOptions` controls the options used for the default rules; + - `keepTerminfo` controls whether `TERMINFO` and `TERMINFO_DIRS` are preserved + for `root` and the `wheel` group. + +- `virtualisation.googleComputeImage` provides a `efi` option to support UEFI + booting now. + +- CoreDNS may be built with external plugins now. This may be done by + overriding `externalPlugins` and `vendorHash` arguments like this: + + ``` + services.coredns = { + enable = true; + package = pkgs.coredns.override { + externalPlugins = [ + {name = "fanout"; repo = "github.com/networkservicemesh/fanout"; version = "v1.9.1";} + ]; + vendorHash = ""; + }; + }; + ``` + + To get the necessary SRI hash, set `vendorHash = "";`. The build will fail + and produce the correct `vendorHash` in the error message. + + If you use this feature, updates to CoreDNS may require updating `vendorHash` + by following these steps again. + +- Using `fusuma` enables the following plugins now: + [appmatcher](https://github.com/iberianpig/fusuma-plugin-appmatcher), + [keypress](https://github.com/iberianpig/fusuma-plugin-keypress), + [sendkey](https://github.com/iberianpig/fusuma-plugin-sendkey), + [tap](https://github.com/iberianpig/fusuma-plugin-tap) and + [wmctrl](https://github.com/iberianpig/fusuma-plugin-wmctrl). + +- The Home Assistant module offers support for installing custom components and + lovelace modules now. Available at + [`services.home-assistant.customComponents`](#opt-services.home-assistant.customComponents) + and + [`services.home-assistant.customLovelaceModules`](#opt-services.home-assistant.customLovelaceModules). + +- TeX Live environments can now be built with the new `texlive.withPackages`. + The procedure for creating custom TeX packages has been changed. Refer to the + [Nixpkgs + manual](https://nixos.org/manual/nixpkgs/stable/#sec-language-texlive-custom-packages) + for more details. + +- In `wxGTK32`, the webkit module `wxWebView` has been enabled on all builds. + Prior releases only enabled this on Darwin. + +- Support for WiFi6 (IEEE 802.11ax) and WPA3-SAE-PK was enabled in the + `hostapd` package, along with a significant rework of the hostapd module. + +- LXD supports virtual machine instances now to complement the existing + container support. + +- The `nixos-rebuild` command has been given a `list-generations` subcommand. + Refer to `man nixos-rebuild` for more details. + +- [`sudo-rs`], a reimplementation of `sudo` in Rust, is now supported. + An experimental new module `security.sudo-rs` was added. + Switching to it (via ` security.sudo-rs.enable = true;`) introduces + slight changes in sudo behaviour, due to `sudo-rs`' current limitations: + - terminfo-related environment variables aren't preserved for `root` and `wheel`; + - `root` and `wheel` are not given the ability to set (or preserve) + arbitrary environment variables. + + **Note:** The `sudo-rs` module only takes configuration through `security.sudo-rs`, + and in particular does not automatically use previously-set rules; this could be + achieved with `security.sudo-rs.extraRules = security.sudo.extraRules;` for instance. + +[`sudo-rs`]: https://github.com/memorysafety/sudo-rs/ + +- There is a new NixOS option when writing NixOS tests + `testing.initrdBackdoor`, that enables `backdoor.service` in initrd. Requires + `boot.initrd.systemd.enable` to be enabled. Boot will pause in Stage 1 at + `initrd.target`, and will listen for commands from the `Machine` python + interface, just like Stage 2 normally does. This enables commands to be sent + to test and debug Stage 1. Use `machine.switch_root()` to leave Stage 1 and + proceed to Stage 2. + +- The Linux kernel module `msr` (refer to + [`msr(4)`](https://man7.org/linux/man-pages/man4/msr.4.html)), which provides + an interface to read and write the model-specific registers (MSRs) of an x86 + CPU, can now be configured via `hardware.cpu.x86.msr`. - The `qemu-vm.nix` module now supports disabling overriding `fileSystems` with `virtualisation.fileSystems`. This enables the user to boot VMs from @@ -634,63 +1313,62 @@ The module update takes care of the new config syntax and the data itself (user qemu-vm module from overriding `fileSystems` by setting `virtualisation.fileSystems = lib.mkForce { };`. -- The `electron` packages now places its application files in `$out/libexec/electron` instead of `$out/lib/electron`. Packages using electron-builder will fail to build and need to be adjusted by changing `lib` to `libexec`. +## Nixpkgs Library Changes {#sec-release-23.11-nixpkgs-lib} -- `teleport` has been upgraded from major version 12 to major version 14. Please see upstream [upgrade instructions](https://goteleport.com/docs/management/operations/upgrading/) and release notes for versions [13](https://goteleport.com/docs/changelog/#1300-050823) and [14](https://goteleport.com/docs/changelog/#1400-092023). Note that Teleport does not officially support upgrades across more than one major version at a time. If you're running Teleport server components, it is recommended to first upgrade to an intermediate 13.x version by setting `services.teleport.package = pkgs.teleport_13`. Afterwards, this option can be removed to upgrade to the default version (14). - -- The Linux kernel module `msr` (see [`msr(4)`](https://man7.org/linux/man-pages/man4/msr.4.html)), which provides an interface to read and write the model-specific registers (MSRs) of an x86 CPU, can now be configured via `hardware.cpu.x86.msr`. - -- Docker now defaults to 24, as 20.10 is stopping to receive security updates and bug fixes after [December 10, 2023](https://github.com/moby/moby/discussions/45104). - -- There is a new NixOS option when writing NixOS tests `testing.initrdBackdoor`, that enables `backdoor.service` in initrd. Requires `boot.initrd.systemd.enable` to be enabled. Boot will pause in stage 1 at `initrd.target`, and will listen for commands from the `Machine` python interface, just like stage 2 normally does. This enables commands to be sent to test and debug stage 1. Use `machine.switch_root()` to leave stage 1 and proceed to stage 2. - -## Nixpkgs library changes {#sec-release-23.11-lib} - -### Breaking changes {#sec-release-23.11-lib-breaking} +### Breaking Changes {#sec-release-23.11-lib-breaking} - [`lib.lists.foldl'`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.lists.foldl-prime) - now always evaluates the initial accumulator argument first. - If you depend on the lazier behavior, consider using [`lib.lists.foldl`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.lists.foldl) - or [`builtins.foldl'`](https://nixos.org/manual/nix/stable/language/builtins.html#builtins-foldl') instead. + now always evaluates the initial accumulator argument first. If you depend on + the lazier behavior, consider using + [`lib.lists.foldl`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.lists.foldl) + or + [`builtins.foldl'`](https://nixos.org/manual/nix/stable/language/builtins.html#builtins-foldl') + instead. - [`lib.attrsets.foldlAttrs`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.attrsets.foldlAttrs) now always evaluates the initial accumulator argument first. - Now that the internal NixOS transition to Markdown documentation is complete, `lib.options.literalDocBook` has been removed after deprecation in 22.11. - `lib.types.string` is now fully deprecated and gives a warning when used. -### Additions and improvements {#sec-release-23.11-lib-additions-improvements} +### Additions and Improvements {#sec-release-23.11-lib-additions-improvements} - [`lib.fileset`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-fileset): - A new sub-library to select local files to use for sources, - designed to be easy and safe to use. + A new sub-library to select local files to use for sources, designed to be + easy and safe to use. - This aims to be a replacement for `lib.sources`-based filtering. - To learn more about it, see [the blog post](https://www.tweag.io/blog/2023-11-28-file-sets/) - or [the tutorial](https://nix.dev/tutorials/file-sets). + This aims to be a replacement for `lib.sources`-based filtering. To learn + more about it, see [the blog + post](https://www.tweag.io/blog/2023-11-28-file-sets/) or [the + tutorial](https://nix.dev/tutorials/file-sets). - [`lib.gvariant`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-gvariant): - A partial and basic implementation of GVariant formatted strings. - See [GVariant Format Strings](https://docs.gtk.org/glib/gvariant-format-strings.html) for details. + A partial and basic implementation of GVariant formatted strings. See + [GVariant Format + Strings](https://docs.gtk.org/glib/gvariant-format-strings.html) for details. - :::{.warning} - This API is not considered fully stable and it might therefore - change in backwards incompatible ways without prior notice. - ::: + :::{.warning} This API is not considered fully stable and it might therefore + change in backwards incompatible ways without prior notice. ::: -- [`lib.asserts`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-asserts): New function: +- [`lib.asserts`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-asserts): + New function: [`assertEachOneOf`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.asserts.assertEachOneOf). -- [`lib.attrsets`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-attrsets): New function: +- [`lib.attrsets`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-attrsets): + New function: [`attrsToList`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.attrsets.attrsToList). -- [`lib.customisation`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-customisation): New function: +- [`lib.customisation`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-customisation): + New function: [`makeScopeWithSplicing'`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.customisation.makeScopeWithSplicing-prime). -- [`lib.fixedPoints`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-fixedPoints): Documentation improvements for +- [`lib.fixedPoints`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-fixedPoints): + Documentation improvements for [`lib.fixedPoints.fix`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.fixedPoints.fix). - `lib.generators`: New functions: [`mkDconfKeyValue`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.generators.mkDconfKeyValue), [`toDconfINI`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.generators.toDconfINI). - `lib.generators.toKeyValue` now supports the `indent` attribute in its first argument. -- [`lib.lists`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-lists): New functions: + `lib.generators.toKeyValue` now supports the `indent` attribute in its first + argument. +- [`lib.lists`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-lists): + New functions: [`findFirstIndex`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.lists.findFirstIndex), [`hasPrefix`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.lists.hasPrefix), [`removePrefix`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.lists.removePrefix), @@ -699,46 +1377,46 @@ The module update takes care of the new config syntax and the data itself (user Documentation improvements for [`lib.lists.foldl'`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.lists.foldl-prime). -- [`lib.meta`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-meta): Documentation of functions now gets rendered -- [`lib.path`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-path): New functions: +- [`lib.meta`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-meta): + Documentation of functions now gets rendered +- [`lib.path`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-path): + New functions: [`hasPrefix`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.path.hasPrefix), [`removePrefix`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.path.removePrefix), [`splitRoot`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.path.splitRoot), [`subpath.components`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.path.subpath.components). -- [`lib.strings`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-strings): New functions: +- [`lib.strings`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-strings): + New functions: [`replicate`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.strings.replicate), [`cmakeOptionType`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.strings.cmakeOptionType), [`cmakeBool`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.strings.cmakeBool), [`cmakeFeature`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.strings.cmakeFeature). -- [`lib.trivial`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-trivial): New function: +- [`lib.trivial`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-trivial): + New function: [`mirrorFunctionArgs`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.trivial.mirrorFunctionArgs). - `lib.systems`: New function: [`equals`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.systems.equals). -- [`lib.options`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-options): Improved documentation for +- [`lib.options`](https://nixos.org/manual/nixpkgs/unstable#sec-functions-library-options): + Improved documentation for [`mkPackageOption`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.options.mkPackageOption). [`mkPackageOption`](https://nixos.org/manual/nixpkgs/unstable#function-library-lib.options.mkPackageOption). now also supports the `pkgsText` attribute. Module system: -- Options in the `options` module argument now have the `declarationPositions` attribute - containing the position where the option was declared: - ``` - $ nix repl -f '' - [...] - nix-repl> :p options.environment.systemPackages.declarationPositions - [ { - column = 7; - file = "/nix/store/vm9zf9wvfd628cchj0hdij1g4hzjrcz9-source/nixos/modules/config/system-path.nix"; - line = 62; - } ] - ``` - Not to be confused with `definitionsWithLocations`, which is the same but for option _definitions_. +- Options in the `options` module argument now have the `declarationPositions` + attribute containing the position where the option was declared: ``` $ nix + repl -f '' [...] nix-repl> :p + options.environment.systemPackages.declarationPositions [ { column = 7; file = + "/nix/store/vm9zf9wvfd628cchj0hdij1g4hzjrcz9-source/nixos/modules/config/system-path.nix"; + line = 62; } ] ``` Not to be confused with `definitionsWithLocations`, which + is the same but for option _definitions_. - Improved error message for option declarations missing `mkOption` ### Deprecations {#sec-release-23.11-lib-deprecations} -- `lib.meta.getExe pkg` (also available as `lib.getExe`) now gives a warning if `pkg.meta.mainProgram` is not set, - but it continues to default to the derivation name. - Nixpkgs accepts PRs that set `meta.mainProgram` on packages where it makes sense. - Use `lib.getExe' pkg "some-command"` to avoid the warning and/or select a different executable. +- `lib.meta.getExe pkg` (also available as `lib.getExe`) now gives a warning if + `pkg.meta.mainProgram` is not set, but it continues to default to the + derivation name. Nixpkgs accepts PRs that set `meta.mainProgram` on packages + where it makes sense. Use `lib.getExe' pkg "some-command"` to avoid the + warning and/or select a different executable.