This replaces the krb5 module's options with RFC 42-style krb5.settings
option, while greatly simplifying the code and fixing a few bugs,
namely:
- #243068 krb5: Configuration silently gets ignored when set by
multiple modules
- not being able to use mkIf etc. inside subattributes of
krb5.libdefaults, e.g. krb5.libdefaults.default_realm = mkIf ...
See #144575.
Closes#243068.
Co-authored-by: h7x4 <h7x4@nani.wtf>
This makes sure we don't need any workarounds for running Invidious with a local
PostgreSQL database.
Changing the default user should be fine as the new init script for PostgreSQL automatically
creates the new user and changes the existing database's owner to the new user. The old user
will still linger and must be removed manually.
See also: https://github.com/NixOS/nixpkgs/pull/266270
This simplifies the setup to receive emails from the ZFS Event Daemon
by relying on the sendmail wrapper defined by other modules such as
msmtp or Postfix.
This is more similar to how other modules like smartd deal with email
configuration.
The user is no longer required to define and rebuild their own ZFS
package to add email support.
GitHub: closes https://github.com/NixOS/nixpkgs/issues/132464
we previously defined a custom type for `boot.kernel.sysctl."net.core.rmem_max"`
to resolve to the highest value set. this patch adds the same behavior to
`"net.core.wmem_max"`.
as this changes the type from a string to an integer, which is a breaking
change this patch also includes a release note and updates the transmission
module to use a number for `wmem_max`.
People are actively writing release notes already and with this it's
ensured that the contents are actually valid.
Also, when writing release notes for something, I'd like to be able to
see a preview.
Apologies to the non-flake users; your repl isn't quite as fancy,
but at least evaluates your config exactly as you would expect,
unlike flakes which are only evaluated impurely for now.
This type is necessary to have correct merging behavior for
`allowUnfreePredicate` and `allowInsecurePredicate`
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
I don't use this tool but saw it in the top level and that's not where it should
live.
This could arguably also be seen as a RAID; it's a bit of an in-between.
see https://github.com/lathiat/nss-mdns#:~:text=in%20such%20a%20situation%20causes%20long%20timeouts%20when%20resolving%20hosts
especially:
> libnss_mdns.so.2 resolves both IPv6 and IPv4 addresses, libnss_mdns4.so.2 only IPv4 addresses and
> libnss_mdns6.so.2 only IPv6 addresses. Due to the fact that most mDNS responders only register local IPv4
> addresses via mDNS, most people will want to use libnss_mdns4.so.2 exclusively. Using libnss_mdns.so.2
> or libnss_mdns6.so.2 in such a situation causes long timeouts when resolving hosts since most modern
> Unix/Linux applications check for IPv6 addresses first, followed by a lookup for IPv4.
Fixed conflict in pkgs/applications/graphics/krita/
krita: 5.1.5 -> 5.2.0
7a40fdc288
, and
treewide: use kde mirror everywhere, don't use pname in download urls
aa15f5066d
This is now the default recommendation upstream for linux platforms
> https://doc.qt.io/qt-6.6/qtmultimedia-index.html#ffmpeg-as-the-default-backend
> In this release the FFmpeg framework is set as the default backend on
> Windows, macOS, Android, and Linux except Yocto distribution.
> The version shipped with Qt binary packages is FFmpeg 6.0
> and is tested by the maintainers.
libXrandr is required to compile support QT_WINDOW_CAPTURE_BACKEND=x11
Provide a NixOS module for the [built-in Anki Sync
Server](https://docs.ankiweb.net/sync-server.html) included in recent
versions of Anki. This supersedes the `ankisyncd` module, but we should
keep that for now because `ankisyncd` supports older versions of Anki
clients than this module.
SnapRAID has a feature where you can specify "split" parity files. This
is useful when you're using 16tb or bigger ext4-formatted disks for
parity. ext4 doesn't support files bigger than 16tb so this "split
parity file" can be used to specify two parity files on a single parity
disk and SnapRAID will automatically use the subsequent file when the current
cannot grow anymore (hits 16TB). You specify these split parity files by
separating them with commas in the "parity" config option. This
mostly already works except when it comes to the scheduled systemd sync
job where it specifies ReadWritePaths. If you specify a parity with
multiple files you'll get an error when the systemd job runs: Failed to
set up mount namespacing:
/run/systemd/unit-root/mnt/parity1/snapraid1.parity,/mnt/parity1/snapraid2.parity: No such file or directory
Essentially, when the parity file paths are passed into ReadWritePaths,
they're always treated as a single path. This change makes sure to
split the paths if they contain a comma.
The big concern for this change is if it would break users who have
commas in their actual parity file paths. This won't be an issue because SnapRAID
itself blindly splits on commas for parity files, so legitimate commas in a parity
file path wouldn't work in SnapRAID anyway. See here:
978d812153/cmdline/state.c (L692)
SnapRAID doc for split parity files: https://www.snapraid.it/manual#7.1
NixOS releases are also `lib` releases :)
The release notes were collected from looking at the `git diff` since
22.11.
Since the NixOS and Nixpkgs manuals are rendered separately, I'm linking
to the "unstable" link to make sure the links definitely work on the time of
release. The "stable" link might take some time to become available
The Nixpkgs documentation on the linux kernel builders focused on
using and extending kernels that were already packaged, but never
mentioned that it's possible to also build a kernel almost "from
scratch".
The NixOS documentation went a bit deeper on manual linux kernel
configs, but that information wasn't particularly NixOS-specific.
This commit consolidates the information related to building the
kernel on Nixpkgs's documentation, while keeping any additional
NixOS-specific information on NixOS's documentation.
An additional README.md was created for contributor-facing
documentation.
* nixos/forgejo: changelog and migration instructions
* nixos/forgejo/docs: clarify sentence
Co-authored-by: Trolli Schmittlauch <schmittlauch@users.noreply.github.com>
* nixos/forgejo/docs: document migration via gitea impersonation
* nixos/forgejo/docs: note about url change on migration
* nixos/forgejo/docs: note about migration (non-)requirement
* nixos/forgejo/docs: header ids
* nixos/forgejo/docs: clarify release notes entry
Co-authored-by: Emily <git@emilylange.de>
* nixos/forgejo/docs: improve manual entry
Co-authored-by: Emily <git@emilylange.de>
* nixos/forgejo/docs: move changelog line to the middle of the section
as noted <!-- To avoid merge conflicts, consider adding your item at an arbitrary place in the list instead. -->
---------
Co-authored-by: Trolli Schmittlauch <schmittlauch@users.noreply.github.com>
Co-authored-by: Emily <git@emilylange.de>
Docker CE 20.10 seems to stop receiving security updates and bug fixes
after December 10, 2023[1].
1. https://github.com/moby/moby/discussions/45104
There is public commitment for longer maintenance and then it seems
risky to default to it during 23.11 life-cycle.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
In my earlier commit
manual: Don't suggest exposing VM port to local network.
I made a side change titled
Use `127.0.0.1` also on the VM side, otherwise connections to
services that, in the VM, bind to `127.0.0.1` only
(doing the safe approach) do not work.
Unfortunately, that was wrong:
QEMU inside the VM always communicates via the virtualised
Ethernet interface, not via the VM's loopback interface.
So trying to connect to `127.0.0.1` on the VM's side cannot work.
The setting
QEMU_NET_OPTS="hostfwd=tcp::2222-:22"
caused the VM's port 2222 to be advertised on the host as
`0.0.0.0:2222`, thus anybody in the local network of the host
could SSH into the VM.
Instead, port-forward to localhost only.
Use `127.0.0.1` also on the VM side, otherwise connections to
services that, in the VM, bind to `127.0.0.1` only
(doing the safe approach) do not work.
See e.g. https://github.com/NixOS/nixpkgs/issues/100192
for more info why localhost listening is the best default.
