- Qt is now directly overriden in QtCreator's definition.
- qt48Full can be used in a development environment to enable access to
docs demos and examples.
NOTE: It may be required to remove older configuration files located in
~/.config/QtProject and at ~/.config/Trolltech.conf to reconfigure
qtcreator with the correct paths. I have found /nix/store/... paths in the
following files:
$HOME/.config/QtProject/qtcreator/toolchains.xml
$HOME/.config/QtProject/qtcreator/qtversion.xml
$HOME/.config/QtProject/qtcreator/helpcollection.qhc
At the first launch, be sure to check your qtcreator's configuration by
selecting Tools->Options. The most important parts are the Kits and
QtVersion tabs located in the Build & Run section.
A little program that can be used to compare putatively similar files line
by line and field by field, ignoring small numeric differences or/and
different numeric formats.
Since `full' isn't recursed into for derivations, nix-env -qaP * won't
show attributes with problematic characters.
Signed-off-by: Shea Levy <shea@shealevy.com>
Sourcery CodeBench manpages are installed under
share/doc/<target-triplet>/man/. Add symlinks so that the manpages
become available to "man".
NOTE: I use symlinks instead of moving the manpages, because I think
it is best to do as little as possible to prebuilt packages.
This branch updates node to 0.10.8, as well as updating its
dependencies. It also updates node-packages to use the new style
generated by npm2nix (some packages may have been lost in the switch,
please check!).
Note that 0.10 had some backwards-compatability breaks with 0.8,
particularly for readable streams. Please see the official documentation
for migration help.
Note that I have not yet tested this on darwin (node.js was already
broken there), but will do so soon and fix it if it's broken.
Signed-off-by: Shea Levy <shea@shealevy.com>
Starting with 1.0.0 (which is not released at the time of this commit
but will be before it is pushed), npm2nix takes a JSON file with a list
of names (and optionally version ranges) and generates a data-only (no
functions, no rec, no let, etc.) nix expression representing the
packages with those names and their dependencies.
node-packages.nix now builds its package list from that generated
expression. If a package needs native dependencies as build inputs, they
can be added to the nativeDeps attribute set. If a package cannot be
generated by npm2nix for some reason, it can be added manually to the
set.
I tried to capture the packages represented by the previous
node-packages.nix in the new node-packages.json, but I almost certainly
missed some that will have to be added manually.
Signed-off-by: Shea Levy <shea@shealevy.com>
Actually, Gajim can use notifications through dbus if notification-daemon is
available. Otherwise it falls back to notify-python, which is why I disabled it
by default, especially because upstream support of that Python library isn't
especially awesome ;-)
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
There is no new upstream version available and the latest upstream release is
still using calls to prehistoric versions of libnotify. Most other distro have
patched this already, so no need to patch again. Patch is from Fedora (which is
the most referenced source seen so far).
Additionally the configure script cannot find the correct path to the codegen
executable, so we're patching it accordingly as well.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This needed a bit of patching the paths to the latex and dvipng executables.
In addition, we also address a small bug by using sed:
tmpfd, tmppng = mkstemp(prefix='gajim_tex', suffix='.png')
tmpfd.close()
This obviously won't work, because mkstemp() actually returns a file descriptor
_number_ and not a Python file object.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Use a patch from Arch Linux to use drill instead of nslookup. The primary reason
for this is because nslookup is in bind, and we don't want to depend on the
whole bind package just for the sake of supporting SRV lookups.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Drill is a lightweight DNS lookup command using ldns, which we are going to use
in Gajim, to avoid a dependency on bind.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This brings in Chromium 27 as the new stable version.
Specific versions of the updated channels:
stable: 26.0.1410.63 -> 27.0.1453.93 (builds fine, tested)
beta: 27.0.1453.81 -> 28.0.1500.20 (builds fine, tested)
dev: 28.0.1500.11 -> 29.0.1516.3 (builds fine, tested)
We now can finally drop the following patches:
* glibc-2.16-use-siginfo_t.patch
* pulseaudio_array_bounds.patch
These were for version 26 only and thus are no longer needed.
In addition, we no longer have to use the pre/post attributes, as there is just
_one_ place that uses version specific stuff (path to webcore.gyp).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Wanted to do this a long time ago, but never had a reason to do it. But with
Chromium 29 having no make target for chrome_sandbox, we now use ninja as well
as the official build and most other distributions.
The whole build/make flags cruft is now integrated into one buildPhase override
and we just call ninja there by exporting the specific variables.
And this also makes enableParallelBuilding obsolete, as we use NIX_BUILD_CORES
directly now.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Actually a "*[0-9]" wildcard isn't enough for some unrelated icons to slip into
the derivation output, so let's explicitely check again within the for loop.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This fixes the following bugs:
* traceback on decryption of OpenPGP-encrypted messages
* remote_control: use GED in send_chat_message
* gajim-0.15.3 can't connect to server without StartTLS support
* "make check" fails with complaining on src/command_system/mapping.py
* Account Wizard: Make text selectable
* Gajim crashes in connect.py
Overview and details:
https://trac.gajim.org/query?status=closed&milestone=0.15.4
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This should clean up the package expression significantly by actually using
explicit input attributes and setting PYTHONPATH and GST_PLUGIN_PATH from
environment variables in the builder.
In addition, this adds a small patch from the upstream Mercurial repository to
add an index.theme to the icons, so Gajim is able to load them correctly from
the store.
With this change, I'm adding myself to the maintainers list as well, because I'm
switching over from TKabber to Gajim.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
I removed darwin-specific bits, as I can't test them right now. If
it's broken, let me know and I'll fix on darwin.
Signed-off-by: Shea Levy <shea@shealevy.com>
Eagle is a schematic capture and PCB layout program from CadSoft. This
is proprietary software; CadSoft provide a self-extracting shell script
with embedded tarball of the prebuilt application.
Add the latest Eagle version, 6.4.0.
I've added a small LD_PRELOAD library that redirects operations on the
license file from <eagle_install_path>/bin/eagle.key to
$HOME/.eagle.key. Without this Eagle will never get past the license
dialog (because you cannot write to the nix store).
Eagle also has issues copying its example projects to other locations;
it seems that it wants to preserve the read-only permissions from the
source over to the destination. Because of this it cannot complete the
copy operation because it cannot write the project files into to the
(read-only) project directory it just created. So wrap chmod by OR'ing
in the write-by-owner bit.
Sourcery CodeBench toolchains are prebuilt GCC toolchains from Mentor
Graphics.
Start out by adding ARM EABI and ARM GNU/Linux toolchains. Sourcery
CodeBench is also available for MIPS, Power, SuperH, ColdFire (and
more), so it should be easy to add later, if needed.
AFAIK, the EABI toolchains use newlib and the GNU/Linux ones use glibc.
This reverts commit a0716f28af.
Starting with r6706, externals now have a fixed revision, so we no longer need
to ignore them.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Conflicts:
pkgs/development/compilers/haxe/default.nix
So, finally, Haxe 3 is stable :-)
An overview of the new features can be found here:
http://haxe.org/manual/haxe3/features
This version now has a new build target "tools", so let's use it.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
