- Replace misleading docs.
- Add new assertions to let configurations make more sense.
- Add clusterInit flag.
- Add some more docs about HA and non-HA modes setup.
- Improve multi-node tests for HA mode.
Fix https://github.com/NixOS/nixpkgs/issues/182085
This option is based on a recommendation from a page last updated in
2014 (see https://www.freedesktop.org/wiki/Software/Glamor/), and it
is not necessary anymore.
Also, it did the wrong thing: it forced DRI2, but Glamor should also
work with DRI3, that is a better option most of the time. So let's
remove this option, folks that still want to force this manually can do
so in other ways.
Enable keter module
Keter is an apploader which:
1. has the old app running on a port.
2. loads a new one, and wait for that to complete
3. switches the old with the new one once the new one finished loading.
It supports more functionality but this use case
is the primary one being used by supercede.
Adds keter as a module to nixos.
Currently keter is unusable with nix,
because it relies on bundeling of a tar and uploading that to a specific folder.
These expressions automate these devops tasks,
with especially nixops in mind.
This will work with versions above 1.8
The test seems to work.
This uses a new version of keter which has good
support for status code on error pages.
We're using this config at production at supercede
so it should be fine.
Squash log:
==========
mention keter in changelog
Update generated release notes
Always restart keter on failure
This is a little bit of extra stability in case keter crashes.
Which can happen under extreme conditions (DoS attacks).
Update nixos/doc/manual/release-notes/rl-2205.section.md
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Update nixos/modules/module-list.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Remove sanitization
don't put domain in as a string
Update nixos/tests/keter.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
add jappie as module maintainer
Use type path instead of two seperate options
Fix generated docs
added test machinery to figure out why it's failing
Fix the test, use console output
run nixpkgs-fmt on all modules
Inline config file.
This get's rid of a lot of inderection as well.
Run nix format
remove comment
simplify executable for test
delete config file
add config for keter root
Remove after redis clause
set keter root by default to /var/lib/keter
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
fix nit
add newlines
add default text and move description in a long description
Delete rather obvious comment
fix release db thing
remove longDescription and put it in a comment instead
change description of mkEnalbeOption
explain what keter does by using the hackage synopsis
set domain to keterDomain and same for executable
move comment to where it's happening
fix type error
add formatting better comment
try add seperate user for keter
Revert "try add seperate user for keter"
This reverts commit d3522d36c96117335bfa072e6f453406c244e940.
Doing this breaks the setup
set default to avoid needing cap_net_bind_service
remove weird comment
use example fields
eleborated on process leakage
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
run nixpkgs-fmt
update docs
Fix formatting, set keter package by default
format our little nixexpr
replace '' -> " where possible
drop indent for multiline string
make description much shorter
regen docs database
This was enabled by default in 18a7ce76fc
with the reason that it would be "useful regardless of the desktop
environment.", which I'm not arguing against.
The reason why this should not be enabled by default is that there are a
lot of systems that NixOS runs on that are not desktop systems.
Users on such systems most likely do not want or need this feature and
could even consider this an antifeature.
Furthermore, it is surprising to them to find out that they have this
enabled on their systems.
They might be even more surprised to find that they have polkit enabled
by default, which was a default that was flipped in
a813be071c. For some discussion as to why
see https://github.com/NixOS/nixpkgs/pull/156858.
Evidently, this default is not only surprising to users, but also module
developers, as most if not all modules for desktop environments already
explicity set services.udisks2.enable = true; which they don't need to
right now.
`cosigned` is no more part of the cosign repository and it has been moved
into a `sigstore/policy-controller` repository. A new package should probably
be created to replace it.
https://github.com/sigstore/cosign/releases/tag/v1.10.0
* Update to the latest upstream version of pass-secret-service that includes
systemd service files.
* Add patch to fix use of a function that has been removed from the Python
Cryptography library in NixOS 22.05
* Install systemd service files in the Nix package.
* Add NixOS test to ensure the D-Bus API activates the service unit.
* Add myself as a maintainer to the package and NixOS test.
* Use checkTarget instead of equivalent custom checkPhase.
Due to lack of maintenance. It is not compatible with the default
Python version (due to the tornado 5) dependency, and doesn't look
like it will be any time soon.
I was under the impression that setting `services.redis.servers.<name>.save = []` would disable RDB persistence as no schedule would mean no persistence. However since the code did not handle this case specially it actually results in no `save` setting being written and the internal Redis default is used.
This patch handles the empty case to disable RDB persistence.
Disabling RDB persistence is useful in a number of scenarios:
1. Using Redis in a pure-cache mode where persistence is not desired.
2. When using the (generally superior) AOF persistence mode this file is never read so there is little point to writing it.
3. When saving is handled manually
For more information see https://redis.io/docs/manual/persistence/
This is a breaking change as the user may have been relying on `[]` using Redis defaults. However I believe that updating the behaviour for the next release is beneficial as IMHO it is less surprising and does what the user would expect. I have added release notes to warn about this change.
By writing the unchecked outputs before checking them, they will
be written to a store path, which appears in the log, and which
sticks around even if the build fails. Eventually it is GCed, but
until then, you can open the file.
If you run it in a terminal+editor combination like VSCode, the
failure location is just one Ctrl+click away.
- Add a module for the thunar file manager, which depends on the xfconf dbus service, and also has a dbus service and a systemd unit.
- Renames the option services.xserver.desktopManager.xfce.thunarPlugins to programs.thunar.plugins.
Riak have been updated a lot since the version 2.2 (now 3.0.10) but
has seen no updated to the package. This is at this point
a problem forcing us to maintain old versions of erlang.
We would be happy to re accept a newer version of Riak if someone want
to spend the time to set it up.
Qt4 is on it's way out, according to
https://github.com/NixOS/nixpkgs/pull/174634
Barco's ClickShare driver/client requires Qt4;
an update isn't in sight anywhere.
To prepare for the removal of Qt4,
the commit at hand removes the
ClickShare package and its NixOS module.
The release notes are appended with a hint about the
removal and some alternatives that might help users
that are still in need of the driver/client functionality.
The previous version from review.coreboot.org is no longer available at
that address. This reverts to using the upstream, which is also a
rewrite and currently in beta. The full release is expected before
22.11.
Very confusingly, the `isPowerPC` predicate in
`lib/systems/inspect.nix` does *not* match `powerpc64le`!
This is because `isPowerPC` is defined as
isPowerPC = { cpu = cpuTypes.powerpc; };
Where `cpuTypes.powerpc` is:
{ bits = 32; significantByte = bigEndian; family = "power"; };
This means that the `isPowerPC` predicate actually only matches the
subset of machines marketed under this name which happen to be 32-bit
and running in big-endian mode which is equivalent to:
with stdenv.hostPlatform; isPower && isBigEndian && is32bit
This seems like a sharp edge that people could easily cut themselves
on. In fact, that has already happened: in
`linux/kernel/common-config.nix` there is a test which will always
fail:
(stdenv.hostPlatform.isPowerPC && stdenv.hostPlatform.is64bit)
A more subtle case of the strict isPowerPC being used instead of the
moreg general isPower accidentally are the GHC expressions:
Update pkgs/development/compilers/ghc/8.10.7.nix
Update pkgs/development/compilers/ghc/8.8.4.nix
Update pkgs/development/compilers/ghc/9.2.2.nix
Update pkgs/development/compilers/ghc/9.0.2.nix
Update pkgs/development/compilers/ghc/head.nix
Since the remaining legitimate use sites of isPowerPC are so few, remove
the isPowerPC predicate completely. The alternative expression above is
noted in the release notes as an alternative.
Co-authored-by: sternenseemann <sternenseemann@systemli.org>
* origin/staging-next: (62 commits)
Re-Revert "lua: fix on darwin by using makeBinaryWrapper (#172749)"
openldap: fix cross-compilation
makeBinaryWrapper: fix codesign on aarch64-darwin
python3Packages.ldap: fix linking with openldap 2.5+
Revert "lua: fix on darwin by using makeBinaryWrapper (#172749)"
wine: enable parallel build again
pkgsi686Linux.gdb: fix formatting for 32-bit systems
gtk4: Fix incorrect merge
nixos/openldap: use upstream unit defaults
openldap: update maintainers
openldap: 2.4.58 -> 2.6.2
Revert "Add mingwW64-llvm cross-system."
lua: fix on darwin by using makeBinaryWrapper (#172749)
python310Packages.python-mimeparse: execute tests
pandas: fix darwin build
gtk3: 3.24.33 -> 3.24.33-2022-03-11
gtk4: patch fixing g-c-c crashes
e2fsprogs: patch for CVE-2022-1304
firefox-unwrapped: fix cross compilation
rustc: expose correct llvmPackages for cross compile
...
Since the list only gates the platforms the nixpkgs flake exposes
packages to build on, the `hydra` label made little sense. It was also
only used for this purpose, so the `tier*` attributes were largely
unnecessary.
To reflect the intention more accurately, we expose
`lib.systems.flakeExposed` and use it to gate flake.nix's system list.
* Add an option services.nextcloud.nginx.hstsMaxAge for setting the max-age
directive of the Strict-Transport-Security HTTP header.
* Make the Strict-Transport-Security HTTP header in the Nginx virtualhost block
dependant upon the option services.nextcloud.https instead of
services.nextcloud.nginx.recommendedHttpHeaders, as this header makes no sense
when not using HTTPS. (Closes#169465)
$ parted /dev/nvme1n1 -- mkpart primary linux-swap -8GiB 100%
Warning: The resulting partition is not properly aligned for best performance: 3108850352s % 2048s != 0s
Ignore/Cancel?
Information: You may need to update /etc/fstab.
When using GB than parted seems to round up itself.
This has a number of benefits such as that applying service limits will
actually work since there isn't a layer of indirection (the Docker daemon)
between the systemd service and the container runtime.
This was an annoyance for me as I have editor hooks cleaning up
trailing white space which lead to regenerating parts of the release notes unnecessarily.
We need to move NixOS containers somewhere else so these don't clash
with Podman, Skopeo & other container software in the libpod &
cri-o/cri-u/libcontainer ecosystems.
The state directory move is not strictly a requirement but is good for
consistency.
- Clarify that shellopts are set in every `execute` call (rather than
only `succeed`).
- Add documentation for the `timeout` parameter and its default values.
`fcitx5` and `service.earlyoom` rely on use XDG autostart files to start.
But for X session with only window manager and no desktop manager
(`none` is used), no one can start them.
This options is added to run these autostart files for sessions without
desktop manager to make other services just work.
Until now, this script has used the version of pandoc from unstable.
This means that running the script on the same version of Nixpkgs
could produce different results, and meant that when Pandoc's output
was changed, random PRs were changing the whole manual when they ran
the script to regenerate docs[1][2].
Here I've changed the manual to use a consistent version of pandoc —
the one from the latest release tag, which will avoid this problem in
future. This will avoid this problem in future. The only time we'll
need to worry about pandoc output changes is when we bump the version
used in this script.
I also considered using the version from the current Nixpkgs branch,
but decided against it as it's unlikely that e.g. the person bumping
Pandoc will remember to regenerate the manual.
[1]: https://github.com/NixOS/nixpkgs/pull/162550
[2]: https://github.com/NixOS/nixpkgs/pull/168535
With version 17 of Keycloak, the Wildfly based distribution was
deprecated in favor of the one based on Quarkus. The difference in
configuration is massive and to accommodate it, both the package and
module had to be rewritten.
This describes how to build your own installer medium with some custom
firmware/drivers, using an Intel MacBook as an example - on which WiFi
doesn't work out of the box, due to it being nonfree.
Fixes#15162.
Co-authored-by: Lucas Hoffmann <lucc@users.noreply.github.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Without configuring the block size a default of 512 bytes is used, which can
slow down the transfer speed massively.
In a test I've done with a semi-decent USB stick, I only get a transfer speed
of around 180 KB/sec when not specifying the block size but see 27 MB/sec when
setting the block size to 1 MB. This makes the transfer of the minimal
installation ISO take half a minute instead of an hour.
using freeform is the new standard way of using modules and should replace
extraConfig.
In particular, this will allow us to place a condition on mails
