Having fixed the Google Compute Engine image build process's copying
of store paths in PR #24264, I ran `nixos-rebuild --upgrade switch`...
and the GCE image broke again, because it sets the NixOS configuration
option for the sysctl variable `kernel.yama.ptrace_scope` to
`mkDefault "1"`, i.e., with override priority 1000, and now the
`sysctl` module sets the same option to `mkDefault "0"` (this was
changed in commit 86721a5f78).
This patch raises the override priority of the Google Compute Engine
image configuration's definition of the Yama sysctl option to 500
(still lower than the priority of an unmodified option definition).
I have tested that this patch allows the Google Compute Engine image
to again build successfully for me.
And adopt the tests to add an interface and remove it again.
It should work when deactivating rstp, it will not work when activating
rstp for the first bridge as then the userspace daemon is not yet
available. But once one bridge is active with stp, it should work with
the reload for any further bridge.
Fixes#21745. Also see #22547.
Currently, if you try to build a NixOS config including channel.nix, e.g.:
nix-build -I nixpkgs=. -I nixos-config=nixos/modules/installer/cd-dvd/installation-cd-minimal.nix nixos -A config.system.build.isoImage
twice in a row, you end up with two different build results. This is
caused by the 'result' symlink of the first build affecting the channel
contents of the second build.
If we use filterSource with a predicate that ignores the 'result'
symlinks, the problem is gone. Do the same thing for VIM/Emacs
swap/backup files to avoid even more 'spurious' rebuilds.
Additionally, filter out the '.git' directory at the same time, as we
'rm -rf' it from the result anyway. This avoids a considerable amount of
unnecessary file I/O copying and deleting the .git directory.
In `nixos/modules/virtualisation/google-compute-image.nix`, copy store
paths with `rsync -a` rather than `cp -prd`, because `rsync` seems
better able to handle the hard-links that may be present in the store,
whereas `cp` may fail to copy them.
I have tested that the Google Compute Engine image builds successfully
for me with this patch, whereas it did not without this patch.
This is the same fix applied for Azure images in commit
097ef6e435d5b3fcde92e67abbaaaaaf05c0723d.
Fixes#23973.
The inability to run strace or gdb is the kind of
developer-unfriendliness that we're used to from OS X, let's not do it
on NixOS.
This restriction can be re-enabled by setting
boot.kernel.sysctl."kernel.yama.ptrace_scope" = 1;
It might be nice to have a NixOS module for enabling hardened defaults.
Xref #14392.
Thanks @abbradar.
kimpanel does not show installed IBus engines or allow switching input
methods. kimpanel does show configured keyboard layouts through kxkb, so I
believe there is some problem communicating with IBus. No error messages are
produced in the log and I have been unable to discover the cause. I have no
intention of continuing to work on kimpanel at this time, so it should be
disabled. The GTK+ 3-based panel provided by IBus is perfectly serviceable in
the interim.
This reverts commit b806e25d65.
This seems to push Hydra's memory usage out of the roof fail nixos
evaluating with:
Too many heap sections: Increase MAXHINCR or MAX_HEAP_SECTS
Let's revert this for now. It's not a big deal at all since the
nixpkgs-unstable jobset is still building the packages.
* The module uses `stringSplit` but it should be `splitString`
* `rmilter` doesn't actually support binding to multiple sockets.
Therefore, bind to the last one specified if `socketActivation` is
`false`.
I also believe there is a bug in this module related to systemd
`ListenStream`. If `socketActivation` is true, Postfix gets
connection timeouts trying to connect to one of the `ListenStream`
inet addresses. I don't know enough about `ListenStream` passing
connections on to `fd:3` to understand what's going on.
These changes are in production (with `socketActivation = false`) via NixOps.
This `tsocks` wrapper leaks DNS requests to clearnet, meanwhile Tor comes with
`torsocks` which doesn't.
Previous commits to this file state that all of this still useful somehow.
Assuming that it's true, at least let's not confuse users with two different tools
and don't clash with the `tsocks` binary from nixpkgs by disabling this by default.
Run Firefox inside an XTerm, it doesn't crash mysteriously this way.
Also try opening developer tools and checking that Firefox doesn't
crash in the process.
This option was initially added to make it easier to use an
up-to-date list, but now that we always use an up-to-date list
from upstream, there's no point to the option.
From now on, you can either use a resolver listed by dnscrypt
upstream or a custom resolver.
Removes tcpOnly and ephemeralKeys: reifying them as nixos
options adds little beyond improved discoverability. Until
17.09 we'll automatically translate these options into extraArgs
for convenience.
Unless reifying an option is necessary for conditional
computation or greatly simplifies configuration/reduces risk of
misconfiguration, it should go into extraArgs instead.
* Moved the wordpress sources derivation to the attribute pkgs.wordpress. This
makes it easier to override.
* Also introduce the `package` option for the wordpress virtual host config which
defaults to pkgs.wordpress.
* Also fixed the test in nixos/tests/wordpress.nix.
The Infinality bytecode interpreter is removed in favor of the new v40 TrueType
interpreter. In the past, the Infinality interpreter provided support for
ClearType-style hinting instructions while the default interpreter (then v35)
provided support only for original TrueType-style instructions. The v40
interpreter corrects this deficiency, so the Infinality interpreter is no longer
necessary.
To understand why the Infinality interpreter is no longer necessary, we should
understand how ClearType differs from TrueType and how the v40 interpreter
works. The following is a summary of information available on the FreeType
website [1] mixed with my own editorializing.
TrueType instructions use horizontal and vertical hints to improve glyph
rendering. Before TrueType, fonts were only vertically hinted; horizontal hints
improved rendering by snapping stems to pixel boundaries. Horizontal hinting is
a risk because it can significantly distort glyph shapes and kerning. Extensive
testing at different resolutions is needed to perfect the TrueType
hints. Microsoft invested significant effort to do this with its "Core fonts for
the Web" project, but few other typefaces have seen this level of attention.
With the advent of subpixel rendering, the effective horizontal resolution of
most displays increased significantly. ClearType eschews horizontal hinting in
favor of horizontal supersampling. Most fonts are designed for the Microsoft
bytecode interpreter, which implements a compatibility mode with
TrueType-style (horizontal and vertical) instructions. However, applying the
full horizontal hints to subpixel-rendered fonts leads to color fringes and
inconsistent stem widths. The Infinality interpreter implements several
techniques to mitigate these problems, going so far as to embed font- and
glyph-specific hacks in the interpreter. On the other hand, the v40 interpreter
ignores the horizontal hinting instructions so that glyphs render as they are
intended to on the Microsoft interpreter. Without the horizontal hints, the
problems of glyph and kerning distortion, color fringes, and inconsistent stem
widths--the problems the Infinality interpreter was created to solve--simply
don't occur in the first place.
There are also security concerns which motivate removing the Infinality patches.
Although there is an updated version of the Infinality interpreter for FreeType
2.7, the lack of a consistent upstream maintainer is a security concern. The
interpreter is a Turing-complete virtual machine which has had security
vulnerabilities in the past. While the default interpreter is used in billions
of devices and is maintained by an active developer, the Infinality interpreter
is neither scrutinized nor maintained. We will probably never know if there are
defects in the Infinality interpreter, and if they were discovered they would
likely never be fixed. I do not think that is an acceptable situtation for a
core library like FreeType.
Dropping the Infinality patches means that font rendering will be less
customizable. I think this is an acceptable trade-off. The Infinality
interpreter made many compromises to mitigate the problems with horizontal
hinting; the main purpose of customization is to tailor these compromises to the
user's preferences. The new interpreter does not have to make these compromises
because it renders fonts as their designers intended, so this level of
customization is not necessary.
The Infinality-associated patches are also removed from cairo. These patches
only set the default rendering options in case they aren't set though
Fontconfig. On NixOS, the rendering options are always set in Fontconfig, so
these patches never actually did anything for us!
The Fontconfig test suite is patched to account for a quirk in the way PCF fonts
are named.
The fontconfig option `hintstyle` is no longer configurable in NixOS. This
option selects the TrueType interpreter; the v40 interpreter is `hintslight` and
the older v35 interpreter is `hintmedium` or `hintfull` (which have actually
always been the same thing). The setting may still be changed through the
`localConf` option or by creating a user Fontconfig file.
Users with HiDPI displays should probably disable hinting and antialiasing: at
best they have no visible effect.
The fontconfig-ultimate settings are still available in NixOS, but they are no
longer the default. They still work, but their main purpose is to set rendering
quirks which are no longer necessary and may actually be
detrimental (e.g. setting `hintfull` for some fonts). Also, the vast array of
font substitutions provided is not an appropriate default; the default setting
should be to give the user the font they asked for.
[1]. https://www.freetype.org/freetype2/docs/subpixel-hinting.html
Added extra config options to allow reading passwords from file rather
than the world-readable nix store.
The full config.json file is created at service startup.
Relevant to #18881
Newer versions of DNSCrypt proxy *can* cache lookups (via
plugin); make the wording more neutral wrt. why one might want
to run the proxy in a forwarding setup.
1) The forking behavior of `buildbot start` is temporarily broken for
mysterious reasons that I'm still looking into
2) Let systemd do the forking: no point in using two different process
startup wait loops
The nixbld group belongs to nix-daemon and you really don't want to be
in it. If you are in it, nix-daemon will kill your processes when you
least expect it :)
It'd be better to do the update as an unprivileged user; for
now, we do our best to minimize the surface available. We
filter mount syscalls to prevent the process from undoing the fs
isolation.
Resolve download.dnscrypt.org using hostip with a bootstrap
resolver (hard-coded to Google Public DNS for now), to ensure
that we can get an up-to-date resolver list without working name
service lookups. This makes us more robust to the upstream
resolver list getting out of date and other DNS configuration
problems.
We use the curl --resolver switch to allow https cert validation
(we'd need to do --insecure if using just the ip addr). Note
that we don't rely on https for security but it's nice to have
it ...
Use mkMerge to make the code a little more ergonomic and easier
to follow (to my eyes, anyway ...). Also take the opportunity
to do some minor cleanups & tweaks, but no functional changes.
After the change of the bonding options, the examples were not quite correct.
The diff is over-the top because the new `let` needs everything indented.
Also add a small docstring to the `networkd` attr in the networking test.
