nixpkgs/pkgs/stdenv/mingw/setup.sh
aszlig 82f94df719 stdenv/setup.sh: Always run postPatch hook.
I'm not sure whether this was by intention, but so far postPatch hooks were
silently skipped whenever the patches list was empty. This change could possibly
change the build results of the following packages:

 * gcc
 * cmake (264)
 * systemtap
 * quemu-kvm

These packages all have in common that they have a postPatch hook and the
patches list can be empty when certain conditions are met.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2013-02-27 15:26:18 +01:00

760 lines
19 KiB
Bash
Executable File

# Run the named hook, either by calling the function with that name or
# by evaluating the variable with that name. This allows convenient
# setting of hooks both from Nix expressions (as attributes /
# environment variables) and from shell scripts (as functions).
runHook() {
local hookName="$1"
if test "$(type -t $hookName)" = function; then
$hookName
else
eval "${!hookName}"
fi
}
exitHandler() {
exitCode=$?
set +e
closeNest
if test -n "$showBuildStats"; then
times > "$NIX_BUILD_TOP/.times"
local -a times=($(cat "$NIX_BUILD_TOP/.times"))
# Print the following statistics:
# - user time for the shell
# - system time for the shell
# - user time for all child processes
# - system time for all child processes
echo "build time elapsed: " ${times[*]}
fi
if test $exitCode != 0; then
runHook failureHook
# If the builder had a non-zero exit code and
# $succeedOnFailure is set, create the file
# `$out/nix-support/failed' to signal failure, and exit
# normally. Otherwise, return the original exit code.
if test -n "$succeedOnFailure"; then
echo "build failed with exit code $exitCode (ignored)"
mkdir -p "$out/nix-support"
echo -n $exitCode > "$out/nix-support/failed"
exit 0
fi
else
runHook exitHook
fi
exit $exitCode
}
trap "exitHandler" EXIT
######################################################################
# Helper functions that might be useful in setup hooks.
addToSearchPathWithCustomDelimiter() {
local delimiter=$1
local varName=$2
local dir=$3
if [ -d "$dir" ]; then
eval export ${varName}=${!varName}${!varName:+$delimiter}${dir}
fi
}
PATH_DELIMITER=':'
addToSearchPath() {
addToSearchPathWithCustomDelimiter "${PATH_DELIMITER}" "$@"
}
######################################################################
# Initialisation.
set -e
test -z $NIX_GCC && NIX_GCC=@GCC@
# Wildcard expansions that don't match should expand to an empty list.
# This ensures that, for instance, "for i in *; do ...; done" does the
# right thing.
shopt -s nullglob
# Set up the initial path.
PATH=
for i in $NIX_GCC @INITIALPATH@; do
if test "$i" = /; then i=; fi
addToSearchPath PATH $i/bin
done
# Hack: the /tmp of Cygwin is different from the /tmp in MSYS
if test -d $NIX_BUILD_TOP; then
echo "Nix build top already exists. Strange."
else
mkdir $NIX_BUILD_TOP
cd $NIX_BUILD_TOP
fi
if test "$NIX_DEBUG" = "1"; then
echo "initial path: $PATH"
fi
# Execute the pre-hook.
export SHELL=@SHELL@
if test -z "$shell"; then
export shell=@SHELL@
fi
# Check that the pre-hook initialised SHELL.
if test -z "$SHELL"; then echo "SHELL not set"; exit 1; fi
# Hack: run gcc's setup hook.
envHooks=()
if test -f $NIX_GCC/nix-support/setup-hook; then
source $NIX_GCC/nix-support/setup-hook
fi
# Ensure that the given directories exists.
ensureDir() {
local dir
for dir in "$@"; do
if ! test -x "$dir"; then mkdir -p "$dir"; fi
done
}
installBin() {
mkdir -p $out/bin
cp "$@" $out/bin
}
# Allow the caller to augment buildInputs (it's not always possible to
# do this before the call to setup.sh, since the PATH is empty at that
# point; here we have a basic Unix environment).
runHook addInputsHook
# Recursively find all build inputs.
findInputs() {
local pkg=$1
case $pkgs in
*\ $pkg\ *)
return 0
;;
esac
pkgs="$pkgs $pkg "
if test -f $pkg/nix-support/setup-hook; then
source $pkg/nix-support/setup-hook
fi
if test -f $pkg/nix-support/propagated-build-inputs; then
for i in $(cat $pkg/nix-support/propagated-build-inputs); do
findInputs $i
done
fi
}
pkgs=""
for i in $buildInputs $propagatedBuildInputs; do
findInputs $i
done
# Set the relevant environment variables to point to the build inputs
# found above.
addToEnv() {
local pkg=$1
if test -d $1/bin; then
addToSearchPath _PATH $1/bin
fi
# Run the package-specific hooks set by the setup-hook scripts.
for i in "${envHooks[@]}"; do
$i $pkg
done
}
for i in $pkgs; do
addToEnv $i
done
# Add the output as an rpath.
if test "$NIX_NO_SELF_RPATH" != "1"; then
export NIX_LDFLAGS="-rpath $out/lib $NIX_LDFLAGS"
if test -n "$NIX_LIB64_IN_SELF_RPATH"; then
export NIX_LDFLAGS="-rpath $out/lib64 $NIX_LDFLAGS"
fi
fi
# Set the TZ (timezone) environment variable, otherwise commands like
# `date' will complain (e.g., `Tue Mar 9 10:01:47 Local time zone must
# be set--see zic manual page 2004').
export TZ=UTC
# Set the prefix. This is generally $out, but it can be overriden,
# for instance if we just want to perform a test build/install to a
# temporary location and write a build report to $out.
if test -z "$prefix"; then
prefix="$out";
fi
if test "$useTempPrefix" = "1"; then
prefix="$NIX_BUILD_TOP/tmp_prefix";
fi
PATH=$_PATH${_PATH:+:}$PATH
if test "$NIX_DEBUG" = "1"; then
echo "final path: $PATH"
fi
# Make GNU Make produce nested output.
export NIX_INDENT_MAKE=1
######################################################################
# Misc. helper functions.
stripDirs() {
local dirs="$1"
local stripFlags="$2"
local dirsNew=
for d in ${dirs}; do
if test -d "$prefix/$d"; then
dirsNew="${dirsNew} $prefix/$d "
fi
done
dirs=${dirsNew}
if test -n "${dirs}"; then
header "stripping (with flags $stripFlags) in $dirs"
find $dirs -type f -print0 | xargs -0 ${xargsFlags:--r} strip $stripFlags || true
stopNest
fi
}
######################################################################
# Textual substitution functions.
substitute() {
local input="$1"
local output="$2"
local -a params=("$@")
local -a args=()
local n p pattern replacement varName
for ((n = 2; n < ${#params[*]}; n += 1)); do
p=${params[$n]}
if test "$p" = "--replace"; then
pattern="${params[$((n + 1))]}"
replacement="${params[$((n + 2))]}"
n=$((n + 2))
fi
if test "$p" = "--subst-var"; then
varName="${params[$((n + 1))]}"
pattern="@$varName@"
replacement="${!varName}"
n=$((n + 1))
fi
if test "$p" = "--subst-var-by"; then
pattern="@${params[$((n + 1))]}@"
replacement="${params[$((n + 2))]}"
n=$((n + 2))
fi
if test ${#args[@]} != 0; then
args[${#args[@]}]="-a"
fi
args[${#args[@]}]="$pattern"
args[${#args[@]}]="$replacement"
done
replace-literal -e -s -- "${args[@]}" < "$input" > "$output".tmp
if test -x "$output"; then
chmod +x "$output".tmp
fi
mv -f "$output".tmp "$output"
}
substituteInPlace() {
local fileName="$1"
shift
substitute "$fileName" "$fileName" "$@"
}
substituteAll() {
local input="$1"
local output="$2"
# Select all environment variables that start with a lowercase character.
for envVar in $(env | sed "s/^[^a-z].*//" | sed "s/^\([^=]*\)=.*/\1/"); do
if test "$NIX_DEBUG" = "1"; then
echo "$envVar -> ${!envVar}"
fi
args="$args --subst-var $envVar"
done
substitute "$input" "$output" $args
}
######################################################################
# What follows is the generic builder.
nestingLevel=0
startNest() {
nestingLevel=$(($nestingLevel + 1))
echo -en "\e[$1p"
}
stopNest() {
nestingLevel=$(($nestingLevel - 1))
echo -en "\e[q"
}
header() {
startNest "$2"
echo "$1"
}
# Make sure that even when we exit abnormally, the original nesting
# level is properly restored.
closeNest() {
while test $nestingLevel -gt 0; do
stopNest
done
}
# This function is useful for debugging broken Nix builds. It dumps
# all environment variables to a file `env-vars' in the build
# directory. If the build fails and the `-K' option is used, you can
# then go to the build directory and source in `env-vars' to reproduce
# the environment used for building.
dumpVars() {
echo "Dumping env-vars to $NIX_BUILD_TOP/env-vars"
if test "$noDumpEnvVars" != "1"; then
export > "$NIX_BUILD_TOP/env-vars"
fi
}
# Utility function: return the base name of the given path, with the
# prefix `HASH-' removed, if present.
stripHash() {
strippedName=$(basename $1);
if echo "$strippedName" | grep -q '^[a-z0-9]\{32\}-'; then
strippedName=$(echo "$strippedName" | cut -c34-)
fi
}
unpackFile() {
curSrc="$1"
local cmd
header "unpacking source archive $curSrc" 3
case "$curSrc" in
*.tar)
tar xvf $curSrc
;;
*.tar.gz | *.tgz | *.tar.Z)
gzip -d < $curSrc | tar xvf -
;;
*.tar.bz2 | *.tbz2)
bzip2 -d < $curSrc | tar xvf -
;;
*.zip)
unzip $curSrc
;;
*)
if test -d "$curSrc"; then
stripHash $curSrc
cp -prvd $curSrc $strippedName
else
if test -z "$unpackCmd"; then
echo "source archive $curSrc has unknown type"
exit 1
fi
runHook unpackCmd
fi
;;
esac
stopNest
}
unpackPhase() {
runHook preUnpack
if test -z "$srcs"; then
if test -z "$src"; then
echo 'variable $src or $srcs should point to the source'
exit 1
fi
srcs="$src"
fi
# To determine the source directory created by unpacking the
# source archives, we record the contents of the current
# directory, then look below which directory got added. Yeah,
# it's rather hacky.
local dirsBefore=""
for i in *; do
if test -d "$i"; then
dirsBefore="$dirsBefore $i "
fi
done
# Unpack all source archives.
for i in $srcs; do
unpackFile $i
done
# Find the source directory.
if test -n "$setSourceRoot"; then
runHook setSourceRoot
elif test -z "$sourceRoot"; then
sourceRoot=
for i in *; do
if test -d "$i"; then
case $dirsBefore in
*\ $i\ *)
;;
*)
if test -n "$sourceRoot"; then
echo "unpacker produced multiple directories"
exit 1
fi
sourceRoot="$i"
;;
esac
fi
done
fi
if test -z "$sourceRoot"; then
echo "unpacker appears to have produced no directories"
exit 1
fi
echo "source root is $sourceRoot"
# By default, add write permission to the sources. This is often
# necessary when sources have been copied from other store
# locations.
if test "$dontMakeSourcesWritable" != 1; then
chmod -R u+w "$sourceRoot"
fi
runHook postUnpack
}
patchPhase() {
runHook prePatch
for i in $patches; do
header "applying patch $i" 3
local uncompress=cat
case $i in
*.gz)
uncompress="gzip -d"
;;
*.bz2)
uncompress="bzip2 -d"
;;
esac
$uncompress < $i | patch ${patchFlags:--p1}
stopNest
done
runHook postPatch
}
configurePhase() {
runHook preConfigure
if test -z "$configureScript"; then
configureScript=./configure
if ! test -x $configureScript; then
echo "no configure script, doing nothing"
return
fi
fi
if test -z "$dontAddPrefix"; then
configureFlags="${prefixKey:---prefix=}$prefix $configureFlags"
fi
# Add --disable-dependency-tracking to speed up some builds.
if test -z "$dontAddDisableDepTrack"; then
if grep -q dependency-tracking $configureScript; then
configureFlags="--disable-dependency-tracking $configureFlags"
fi
fi
# By default, disable static builds.
if test -z "$dontDisableStatic"; then
if grep -q enable-static $configureScript; then
configureFlags="--disable-static $configureFlags"
fi
fi
echo "configure flags: $configureFlags ${configureFlagsArray[@]}"
$configureScript $configureFlags "${configureFlagsArray[@]}"
runHook postConfigure
}
buildPhase() {
runHook preBuild
if test -z "$makeFlags" && ! test -n "$makefile" -o -e "Makefile" -o -e "makefile" -o -e "GNUmakefile"; then
echo "no Makefile, doing nothing"
return
fi
echo "make flags: $makeFlags ${makeFlagsArray[@]} $buildFlags ${buildFlagsArray[@]}"
make ${makefile:+-f $makefile} \
$makeFlags "${makeFlagsArray[@]}" \
$buildFlags "${buildFlagsArray[@]}"
runHook postBuild
}
checkPhase() {
runHook preCheck
echo "check flags: $makeFlags ${makeFlagsArray[@]} $checkFlags ${checkFlagsArray[@]}"
make ${makefile:+-f $makefile} \
$makeFlags "${makeFlagsArray[@]}" \
$checkFlags "${checkFlagsArray[@]}" ${checkTarget:-check}
runHook postCheck
}
patchELF() {
# Patch all ELF executables and shared libraries.
header "patching ELF executables and libraries"
if test -e "$prefix"; then
find "$prefix" \( \
\( -type f -a -name "*.so*" \) -o \
\( -type f -a -perm +0100 \) \
\) -print -exec patchelf --shrink-rpath {} \;
fi
stopNest
}
patchShebangs() {
# Rewrite all script interpreter file names (`#! /path') under the
# specified directory tree to paths found in $PATH. E.g.,
# /bin/sh will be rewritten to /nix/store/<hash>-some-bash/bin/sh.
# Interpreters that are already in the store are left untouched.
header "patching script interpreter paths"
local dir="$1"
local f
for f in $(find "$dir" -type f -perm +0100); do
local oldPath=$(sed -ne '1 s,^#![ ]*\([^ ]*\).*$,\1,p' "$f")
if test -n "$oldPath" -a "${oldPath:0:${#NIX_STORE}}" != "$NIX_STORE"; then
local newPath=$(type -P $(basename $oldPath) || true)
if test -n "$newPath" -a "$newPath" != "$oldPath"; then
echo "$f: interpreter changed from $oldPath to $newPath"
sed -i -e "1 s,$oldPath,$newPath," "$f"
fi
fi
done
stopNest
}
installPhase() {
runHook preInstall
mkdir -p "$prefix"
installTargets=${installTargets:-install}
echo "install flags: $installTargets $makeFlags ${makeFlagsArray[@]} $installFlags ${installFlagsArray[@]}"
make ${makefile:+-f $makefile} $installTargets \
$makeFlags "${makeFlagsArray[@]}" \
$installFlags "${installFlagsArray[@]}"
runHook postInstall
}
# The fixup phase performs generic, package-independent, Nix-related
# stuff, like running patchelf and setting the
# propagated-build-inputs. It should rarely be overriden.
fixupPhase() {
runHook preFixup
# Put man/doc/info under $out/share.
forceShare=${forceShare:=man doc info}
if test -n "$forceShare"; then
for d in $forceShare; do
if test -d "$prefix/$d"; then
if test -d "$prefix/share/$d"; then
echo "both $d/ and share/$d/ exists!"
else
echo "fixing location of $d/ subdirectory"
mkdir -p $prefix/share
if test -w $prefix/share; then
mv -v $prefix/$d $prefix/share
ln -sv $prefix/share/$d $prefix/$d
fi
fi
fi
done;
fi
# TODO: strip _only_ ELF executables, and return || fail here...
if test -z "$dontStrip"; then
stripDebugList=${stripDebugList:-lib lib64 libexec bin sbin}
if test -n "$stripDebugList"; then
stripDirs "$stripDebugList" "${stripDebugFlags:--S}"
fi
stripAllList=${stripAllList:-}
if test -n "$stripAllList"; then
stripDirs "$stripAllList" "${stripAllFlags:--s}"
fi
fi
if test "$havePatchELF" = 1 -a -z "$dontPatchELF"; then
patchELF "$prefix"
fi
if test -z "$dontPatchShebangs"; then
patchShebangs "$prefix"
fi
if test -n "$propagatedBuildInputs"; then
mkdir -p "$out/nix-support"
echo "$propagatedBuildInputs" > "$out/nix-support/propagated-build-inputs"
fi
if test -n "$setupHook"; then
mkdir -p "$out/nix-support"
substituteAll "$setupHook" "$out/nix-support/setup-hook"
fi
runHook postFixup
}
distPhase() {
runHook preDist
echo "dist flags: $distFlags ${distFlagsArray[@]}"
make ${makefile:+-f $makefile} $distFlags "${distFlagsArray[@]}" ${distTarget:-dist}
if test "$dontCopyDist" != 1; then
mkdir -p "$out/tarballs"
# Note: don't quote $tarballs, since we explicitly permit
# wildcards in there.
cp -pvd ${tarballs:-*.tar.gz} $out/tarballs
fi
runHook postDist
}
showPhaseHeader() {
local phase="$1"
case $phase in
unpackPhase) header "unpacking sources";;
patchPhase) header "patching sources";;
configurePhase) header "configuring";;
buildPhase) header "building";;
checkPhase) header "running tests";;
installPhase) header "installing";;
fixupPhase) header "post-installation fixup";;
*) header "$phase";;
esac
}
genericBuild() {
header "building $out"
if test -n "$buildCommand"; then
eval "$buildCommand"
return
fi
if test -z "$phases"; then
phases="$prePhases unpackPhase patchPhase $preConfigurePhases \
configurePhase $preBuildPhases buildPhase checkPhase \
$preInstallPhases installPhase fixupPhase \
$preDistPhases distPhase $postPhases";
fi
for curPhase in $phases; do
if test "$curPhase" = buildPhase -a -n "$dontBuild"; then continue; fi
if test "$curPhase" = checkPhase -a -z "$doCheck"; then continue; fi
if test "$curPhase" = installPhase -a -n "$dontInstall"; then continue; fi
if test "$curPhase" = fixupPhase -a -n "$dontFixup"; then continue; fi
if test "$curPhase" = distPhase -a -z "$doDist"; then continue; fi
showPhaseHeader "$curPhase"
dumpVars
# Evaluate the variable named $curPhase if it exists, otherwise the
# function named $curPhase.
eval "${!curPhase:-$curPhase}"
if test "$curPhase" = unpackPhase; then
cd "${sourceRoot:-.}"
fi
stopNest
done
stopNest
}
dumpVars