2019-11-05 05:12:23 +03:00
|
|
|
/+ language-server-parser
|
2019-11-01 07:37:24 +03:00
|
|
|
:: Autocomplete for hoon.
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
::
|
2019-11-04 08:32:42 +03:00
|
|
|
=/ debug |
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
|%
|
2019-11-27 05:49:31 +03:00
|
|
|
+* option [item]
|
2020-01-28 05:24:39 +03:00
|
|
|
[term=cord detail=item]
|
2019-11-01 00:56:54 +03:00
|
|
|
::
|
2019-11-04 06:18:40 +03:00
|
|
|
:: Like +rose except also produces line number
|
|
|
|
|
::
|
|
|
|
|
++ lily
|
|
|
|
|
|* {los/tape sab/rule}
|
|
|
|
|
=+ vex=(sab [[1 1] los])
|
|
|
|
|
?~ q.vex
|
|
|
|
|
[%| p=p.vex(q (dec q.p.vex))]
|
|
|
|
|
?. =(~ q.q.u.q.vex)
|
|
|
|
|
[%| p=p.vex(q (dec q.p.vex))]
|
|
|
|
|
[%& p=p.u.q.vex]
|
|
|
|
|
::
|
2019-11-01 00:56:54 +03:00
|
|
|
:: Get all the identifiers accessible if this type is your subject.
|
|
|
|
|
::
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
++ get-identifiers
|
|
|
|
|
|= ty=type
|
|
|
|
|
%- flop
|
2019-11-27 05:49:31 +03:00
|
|
|
|- ^- (list (option type))
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
?- ty
|
|
|
|
|
%noun ~
|
|
|
|
|
%void ~
|
|
|
|
|
[%atom *] ~
|
|
|
|
|
[%cell *]
|
|
|
|
|
%+ weld
|
|
|
|
|
$(ty p.ty)
|
|
|
|
|
$(ty q.ty)
|
|
|
|
|
::
|
|
|
|
|
[%core *]
|
|
|
|
|
%- weld
|
2019-11-01 02:38:47 +03:00
|
|
|
:_ ?. ?=(%gold r.p.q.ty)
|
|
|
|
|
~
|
|
|
|
|
$(ty p.ty)
|
2019-11-27 05:49:31 +03:00
|
|
|
^- (list (option type))
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
%- zing
|
|
|
|
|
%+ turn ~(tap by q.r.q.ty)
|
|
|
|
|
|= [term =tome]
|
|
|
|
|
%+ turn
|
|
|
|
|
~(tap by q.tome)
|
|
|
|
|
|= [name=term =hoon]
|
|
|
|
|
^- (pair term type)
|
|
|
|
|
~| term=term
|
|
|
|
|
[name ~(play ~(et ut ty) ~[name] ~)]
|
|
|
|
|
::
|
|
|
|
|
[%face *]
|
|
|
|
|
?^ p.ty
|
|
|
|
|
~
|
|
|
|
|
[p.ty q.ty]~
|
|
|
|
|
::
|
|
|
|
|
[%fork *]
|
2019-11-01 09:21:10 +03:00
|
|
|
%= $
|
|
|
|
|
ty
|
|
|
|
|
=/ tines ~(tap in p.ty)
|
|
|
|
|
?~ tines
|
|
|
|
|
%void
|
|
|
|
|
|- ^- type
|
|
|
|
|
?~ t.tines
|
|
|
|
|
i.tines
|
|
|
|
|
(~(fuse ut $(tines t.tines)) i.tines)
|
|
|
|
|
==
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
::
|
|
|
|
|
[%hint *] $(ty q.ty)
|
|
|
|
|
[%hold *] $(ty ~(repo ut ty))
|
|
|
|
|
==
|
|
|
|
|
::
|
2019-11-12 18:57:01 +03:00
|
|
|
++ search-exact
|
2019-11-27 05:49:31 +03:00
|
|
|
|* [sid=term options=(list (option))]
|
|
|
|
|
=/ match
|
|
|
|
|
%+ skim options
|
2020-01-28 05:24:39 +03:00
|
|
|
|= [id=cord *]
|
2019-11-12 18:57:01 +03:00
|
|
|
=(sid id)
|
|
|
|
|
?~ match
|
|
|
|
|
~
|
|
|
|
|
[~ i.match]
|
|
|
|
|
::
|
2019-11-01 00:56:54 +03:00
|
|
|
:: Get all the identifiers that start with sid.
|
|
|
|
|
::
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
++ search-prefix
|
2020-01-28 05:24:39 +03:00
|
|
|
|* [sid=cord ids=(list (option))]
|
2019-11-27 05:49:31 +03:00
|
|
|
^+ ids
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
%+ skim ids
|
2020-01-28 05:24:39 +03:00
|
|
|
|= [id=cord *]
|
|
|
|
|
^- ?(%.y %.n)
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
=(sid (end 3 (met 3 sid) id))
|
|
|
|
|
::
|
2019-11-01 00:56:54 +03:00
|
|
|
:: Get the longest prefix of a list of identifiers.
|
|
|
|
|
::
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
++ longest-match
|
2019-11-27 05:49:31 +03:00
|
|
|
|= matches=(list (option))
|
2020-01-28 05:24:39 +03:00
|
|
|
^- cord
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
?~ matches
|
|
|
|
|
''
|
|
|
|
|
=/ n 1
|
|
|
|
|
=/ last (met 3 term.i.matches)
|
|
|
|
|
|- ^- term
|
|
|
|
|
?: (gth n last)
|
|
|
|
|
term.i.matches
|
|
|
|
|
=/ prefix (end 3 n term.i.matches)
|
|
|
|
|
?: |- ^- ?
|
|
|
|
|
?| ?=(~ t.matches)
|
|
|
|
|
?& =(prefix (end 3 n term.i.t.matches))
|
|
|
|
|
$(t.matches t.t.matches)
|
|
|
|
|
== ==
|
|
|
|
|
$(n +(n))
|
|
|
|
|
(end 3 (dec n) term.i.matches)
|
|
|
|
|
::
|
2019-11-01 00:56:54 +03:00
|
|
|
:: Run +find-type safely, printing the first line of the stack trace on
|
|
|
|
|
:: error.
|
|
|
|
|
::
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
++ find-type-mule
|
|
|
|
|
|= [sut=type gen=hoon]
|
|
|
|
|
^- (unit [term type])
|
|
|
|
|
=/ res (mule |.((find-type sut gen)))
|
|
|
|
|
?- -.res
|
|
|
|
|
%& p.res
|
2019-11-04 06:18:40 +03:00
|
|
|
%| ((slog (flop (scag 10 p.res))) ~)
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
==
|
|
|
|
|
::
|
|
|
|
|
:: Get the subject type of the wing where you've put the "magic-spoon".
|
|
|
|
|
::
|
|
|
|
|
++ find-type
|
|
|
|
|
|= [sut=type gen=hoon]
|
|
|
|
|
=* loop $
|
|
|
|
|
|^
|
|
|
|
|
^- (unit [term type])
|
|
|
|
|
?- gen
|
|
|
|
|
[%cnts [%magic-spoon ~] *] `['' sut]
|
|
|
|
|
[%cnts [%magic-spoon @ ~] *] `[i.t.p.gen sut]
|
2019-11-01 08:43:50 +03:00
|
|
|
[%cnts [%magic-spoon @ *] *]
|
|
|
|
|
%= $
|
|
|
|
|
sut (~(play ut sut) wing+t.t.p.gen)
|
|
|
|
|
t.p.gen t.p.gen(t ~)
|
|
|
|
|
==
|
|
|
|
|
::
|
|
|
|
|
[%cnts [%magic-fork @ ~] *]
|
|
|
|
|
`['' (~(play ut sut) wing+t.p.gen)]
|
|
|
|
|
::
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
[^ *] (both p.gen q.gen)
|
|
|
|
|
[%ktcn *] loop(gen p.gen)
|
|
|
|
|
[%brcn *] (grow q.gen)
|
|
|
|
|
[%brvt *] (grow q.gen)
|
|
|
|
|
[%cnts *]
|
|
|
|
|
|- ^- (unit [term type])
|
|
|
|
|
=* inner-loop $
|
|
|
|
|
?~ q.gen
|
|
|
|
|
~
|
|
|
|
|
%+ replace
|
|
|
|
|
loop(gen q.i.q.gen)
|
|
|
|
|
|. inner-loop(q.gen t.q.gen)
|
|
|
|
|
::
|
|
|
|
|
[%dtkt *] (spec-and-hoon p.gen q.gen)
|
|
|
|
|
[%dtls *] loop(gen p.gen)
|
|
|
|
|
[%rock *] ~
|
|
|
|
|
[%sand *] ~
|
|
|
|
|
[%tune *] ~
|
|
|
|
|
[%dttr *] (both p.gen q.gen)
|
|
|
|
|
[%dtts *] (both p.gen q.gen)
|
|
|
|
|
[%dtwt *] loop(gen p.gen)
|
|
|
|
|
[%hand *] ~
|
|
|
|
|
[%ktbr *] loop(gen p.gen)
|
|
|
|
|
[%ktls *] (both p.gen q.gen)
|
|
|
|
|
[%ktpd *] loop(gen p.gen)
|
|
|
|
|
[%ktsg *] loop(gen p.gen)
|
|
|
|
|
[%ktwt *] loop(gen p.gen)
|
|
|
|
|
[%note *] loop(gen q.gen)
|
|
|
|
|
[%sgzp *] (both p.gen q.gen)
|
|
|
|
|
[%sgbn *] loop(gen q.gen) :: should check for hoon in p.gen
|
|
|
|
|
[%tsbn *] (change p.gen q.gen)
|
|
|
|
|
[%tscm *]
|
|
|
|
|
%+ replace
|
|
|
|
|
loop(gen p.gen)
|
|
|
|
|
|.(loop(gen q.gen, sut (~(busk ut sut) p.gen)))
|
|
|
|
|
::
|
|
|
|
|
[%wtcl *] (bell p.gen q.gen r.gen)
|
|
|
|
|
[%fits *] (both p.gen wing+q.gen)
|
|
|
|
|
[%wthx *] loop(gen wing+q.gen)
|
|
|
|
|
[%dbug *] loop(gen q.gen)
|
|
|
|
|
[%zpcm *] (both p.gen q.gen)
|
|
|
|
|
[%lost *] loop(gen p.gen)
|
|
|
|
|
[%zpmc *] (both p.gen q.gen)
|
|
|
|
|
[%zpts *] loop(gen p.gen)
|
2019-10-31 23:55:48 +03:00
|
|
|
[%zpvt *] (both q.gen r.gen)
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
[%zpzp *] ~
|
|
|
|
|
*
|
|
|
|
|
=+ doz=~(open ap gen)
|
|
|
|
|
?: =(doz gen)
|
|
|
|
|
~_ (show [%c 'hoon'] [%q gen])
|
|
|
|
|
~> %mean.'play-open'
|
|
|
|
|
!!
|
|
|
|
|
loop(gen doz)
|
|
|
|
|
==
|
|
|
|
|
::
|
|
|
|
|
++ replace
|
|
|
|
|
|= [a=(unit [term type]) b=(trap (unit [term type]))]
|
|
|
|
|
^- (unit [term type])
|
|
|
|
|
?~(a $:b a)
|
|
|
|
|
::
|
|
|
|
|
++ both
|
|
|
|
|
|= [a=hoon b=hoon]
|
|
|
|
|
(replace loop(gen a) |.(loop(gen b)))
|
|
|
|
|
::
|
|
|
|
|
++ bell
|
|
|
|
|
|= [a=hoon b=hoon c=hoon]
|
2019-11-02 04:02:20 +03:00
|
|
|
%+ replace loop(gen a)
|
|
|
|
|
|. %+ replace loop(gen b, sut (~(gain ut sut) a))
|
|
|
|
|
|. loop(gen c, sut (~(lose ut sut) a))
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
::
|
|
|
|
|
++ spec-and-hoon
|
|
|
|
|
|= [a=spec b=hoon]
|
|
|
|
|
(replace (find-type-in-spec sut a) |.(loop(gen b)))
|
|
|
|
|
::
|
|
|
|
|
++ change
|
|
|
|
|
|= [a=hoon b=hoon]
|
|
|
|
|
(replace loop(gen a) |.(loop(gen b, sut (~(play ut sut) a))))
|
|
|
|
|
::
|
|
|
|
|
++ grow
|
|
|
|
|
|= m=(map term tome)
|
|
|
|
|
=/ tomes ~(tap by m)
|
|
|
|
|
|- ^- (unit [term type])
|
|
|
|
|
=* outer-loop $
|
|
|
|
|
?~ tomes
|
|
|
|
|
~
|
|
|
|
|
=/ arms ~(tap by q.q.i.tomes)
|
|
|
|
|
|- ^- (unit [term type])
|
|
|
|
|
=* inner-loop $
|
|
|
|
|
?~ arms
|
|
|
|
|
outer-loop(tomes t.tomes)
|
|
|
|
|
%+ replace
|
|
|
|
|
loop(gen q.i.arms, sut (~(play ut sut) gen))
|
|
|
|
|
|. inner-loop(arms t.arms)
|
|
|
|
|
--
|
|
|
|
|
::
|
|
|
|
|
:: Not implemented yet. I wonder whether we should modify types found
|
|
|
|
|
:: in spec mode such that if it's a mold that produces a type, it
|
|
|
|
|
:: should just display the type and not that it's technically a
|
|
|
|
|
:: function.
|
|
|
|
|
::
|
|
|
|
|
++ find-type-in-spec
|
|
|
|
|
|= [sut=type pec=spec]
|
|
|
|
|
^- (unit [term type])
|
2019-11-04 06:18:40 +03:00
|
|
|
~
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
::
|
2019-11-12 18:57:01 +03:00
|
|
|
++ get-id
|
2019-11-01 00:56:54 +03:00
|
|
|
|= [pos=@ud txt=tape]
|
2020-06-14 19:48:27 +03:00
|
|
|
^- [forward=(unit @t) backward=(unit @t) id=(unit @t)]
|
|
|
|
|
=/ seek
|
|
|
|
|
;~(sfix (punt (cook crip (star prn))) (star ;~(pose prn (just `@`10))))
|
|
|
|
|
=/ forward=(unit @t)
|
|
|
|
|
(scan (slag pos txt) seek)
|
|
|
|
|
=/ backward=(unit @t)
|
2019-11-16 04:48:25 +03:00
|
|
|
%- (lift |=(t=@tas (swp 3 t)))
|
2020-06-14 19:48:27 +03:00
|
|
|
(scan (flop (scag pos txt)) seek)
|
|
|
|
|
=/ id=(unit @t)
|
2019-11-01 10:18:34 +03:00
|
|
|
?~ forward
|
|
|
|
|
?~ backward
|
|
|
|
|
~
|
|
|
|
|
`u.backward
|
|
|
|
|
?~ backward
|
|
|
|
|
`u.forward
|
|
|
|
|
`(cat 3 u.backward u.forward)
|
2019-11-12 18:57:01 +03:00
|
|
|
[forward backward id]
|
|
|
|
|
::
|
|
|
|
|
:: Insert magic marker in hoon source at the given position.
|
|
|
|
|
::
|
|
|
|
|
++ insert-magic
|
|
|
|
|
|= [pos=@ud txt=tape]
|
|
|
|
|
^- [back-pos=@ud fore-pos=@ud txt=tape]
|
|
|
|
|
:: Find beg-pos by searching backward to where the current term
|
|
|
|
|
:: begins
|
|
|
|
|
=+ (get-id pos txt)
|
2019-11-01 10:18:34 +03:00
|
|
|
=/ back-pos
|
|
|
|
|
?~ backward
|
|
|
|
|
pos
|
|
|
|
|
(sub pos (met 3 u.backward))
|
|
|
|
|
=/ fore-pos
|
|
|
|
|
?~ forward
|
2019-11-01 00:56:54 +03:00
|
|
|
pos
|
2019-11-01 10:18:34 +03:00
|
|
|
(add pos (met 3 u.forward))
|
|
|
|
|
:+ back-pos fore-pos
|
2019-11-01 00:56:54 +03:00
|
|
|
:: Insert "magic-spoon" marker so +find-type can identify where to
|
|
|
|
|
:: stop.
|
|
|
|
|
::
|
|
|
|
|
;: weld
|
2019-11-01 10:18:34 +03:00
|
|
|
(scag back-pos txt)
|
2019-11-01 08:43:50 +03:00
|
|
|
?: &(?=(~ id) ?=([%'.' *] (slag pos txt)))
|
|
|
|
|
"magic-fork"
|
2019-11-01 00:56:54 +03:00
|
|
|
"magic-spoon"
|
|
|
|
|
?~ id
|
|
|
|
|
""
|
|
|
|
|
"."
|
2019-11-01 10:18:34 +03:00
|
|
|
(slag back-pos txt)
|
2019-11-01 00:56:54 +03:00
|
|
|
"\0a"
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
==
|
|
|
|
|
::
|
2019-11-01 00:56:54 +03:00
|
|
|
:: Produce the longest possible advance without choosing between
|
|
|
|
|
:: matches.
|
|
|
|
|
::
|
|
|
|
|
:: Takes a +hoon which has already has a magic-spoon marker. Useful if
|
|
|
|
|
:: you want to handle your own parsing.
|
|
|
|
|
::
|
|
|
|
|
++ advance-hoon
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
|= [sut=type gen=hoon]
|
|
|
|
|
%+ bind (find-type-mule sut gen)
|
|
|
|
|
|= [id=term typ=type]
|
2019-11-27 05:49:31 +03:00
|
|
|
=/ matches=(list (option type))
|
|
|
|
|
(search-prefix id (get-identifiers typ))
|
|
|
|
|
(longest-match matches)
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
::
|
2019-11-01 00:56:54 +03:00
|
|
|
:: Same as +advance-hoon, but takes a position and text directly.
|
|
|
|
|
::
|
|
|
|
|
++ advance-tape
|
|
|
|
|
|= [sut=type pos=@ud code=tape]
|
|
|
|
|
(advance-hoon sut (scan txt:(insert-magic pos code) vest))
|
|
|
|
|
::
|
|
|
|
|
:: Produce a list of matches.
|
|
|
|
|
::
|
|
|
|
|
:: Takes a +hoon which has already has a magic-spoon marker. Useful if
|
|
|
|
|
:: you want to handle your own parsing.
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
::
|
2019-11-01 00:56:54 +03:00
|
|
|
++ tab-list-hoon
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
|= [sut=type gen=hoon]
|
2019-11-27 05:49:31 +03:00
|
|
|
^- (unit (list (option type)))
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
%+ bind (find-type-mule sut gen)
|
|
|
|
|
|= [id=term typ=type]
|
|
|
|
|
(search-prefix id (get-identifiers typ))
|
|
|
|
|
::
|
2019-11-01 00:56:54 +03:00
|
|
|
:: Same as +advance-hoon, but takes a position and text directly.
|
|
|
|
|
::
|
|
|
|
|
++ tab-list-tape
|
2019-11-04 08:32:42 +03:00
|
|
|
|= [sut=type pos=@ud code=tape]
|
2019-11-27 05:49:31 +03:00
|
|
|
^- (each (unit (list (option type))) [row=@ col=@])
|
2019-11-04 08:32:42 +03:00
|
|
|
~? > debug %start-magick
|
2019-11-04 06:18:40 +03:00
|
|
|
=/ magicked txt:(insert-magic pos code)
|
2019-11-04 08:32:42 +03:00
|
|
|
~? > debug %start-parsing
|
2020-05-14 09:26:52 +03:00
|
|
|
=/ res (lily magicked (language-server-parser *path))
|
2019-11-04 06:18:40 +03:00
|
|
|
?: ?=(%| -.res)
|
2019-11-04 08:32:42 +03:00
|
|
|
~? > debug [%parsing-error p.res]
|
2019-11-04 06:18:40 +03:00
|
|
|
[%| p.res]
|
|
|
|
|
:- %&
|
2019-11-04 08:32:42 +03:00
|
|
|
~? > debug %parsed-good
|
2020-05-14 09:26:52 +03:00
|
|
|
((cury tab-list-hoon sut) hoon.p.res)
|
2020-04-01 04:22:21 +03:00
|
|
|
::
|
|
|
|
|
:: Generators
|
|
|
|
|
++ tab-generators
|
|
|
|
|
|= [pfix=path app=(unit term) gens=(list term)]
|
|
|
|
|
^- (list (option tank))
|
|
|
|
|
%+ turn gens
|
|
|
|
|
|= gen=term
|
|
|
|
|
^- (option tank)
|
|
|
|
|
=/ pax=path
|
|
|
|
|
(weld pfix ~[gen %hoon])
|
|
|
|
|
=/ file
|
|
|
|
|
.^(@t %cx pax)
|
|
|
|
|
:_ (render-help file)
|
|
|
|
|
?~ app
|
|
|
|
|
(cat 3 '+' gen)
|
|
|
|
|
?: =(%hood u.app)
|
|
|
|
|
(cat 3 '|' gen)
|
|
|
|
|
:((cury cat 3) ':' u.app '|' gen)
|
|
|
|
|
:: Stolen from +help
|
|
|
|
|
++ render-help
|
|
|
|
|
|= a=@t
|
|
|
|
|
^- tank
|
|
|
|
|
:- %leaf
|
|
|
|
|
=/ c (to-wain:format a)
|
|
|
|
|
?~ c "~"
|
|
|
|
|
?. =(':: ' (end 3 4 i.c))
|
|
|
|
|
"<undocumented>"
|
|
|
|
|
(trip i.c)
|
dojo: add tab completion
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
2019-10-31 06:39:02 +03:00
|
|
|
--
|
