In response to clog notification from remote ames, we were sending a
%cork to clean up the flow. However, the wire we were using had the /sys
prefix already stripped off. Here, we put it back in.
Start by killing subscription nonce 0, then work our way up instead of
down. We enhance the printf with a "total nonces" indicator so we can
still easily see the progress being made.
Previous +ap-doff kicked the agent repeatedly. We needed to kick
it only once. Now publisher agents clear their incoming subscription
state without the subscriber making lots of new subscriptions because
of repeated kicking.
+on-plea gets called in two very different ways:
1) handling request from local vane to send %plea to peer
2) handling %cork request from another ship, which our local ames has %pass'ed
to ourselves
In the second case, we shouldn't print misleadingly, or bind a duct in the ossuary.
+ap-nuke was not including the nonce, but should.
+ap-handle-peers was potentially including a zero nonce.
(The latter shouldn't have been possible, but there's a bug in +load
where sub-nonce.yoke gets initialized as 0 instead of 1.)
Gall tells ames to %cork flows for subscriptions it has closed.
Receiving a kick also closes a subscription, but gall wasn't issuing a
%cork in that case. We correct that here.
Inlines +mo-handle-ames-response's logic at its only callsite.
seems that this structure has been unused since
e75ab631a4 and confuses
newbies trying to figure out exactly what the commit
structure is (which is how I came across this)
Without this, a ship would send a cork on a max of one flow per
recork timer, which could take years to clear for some ships.
This starts a hot loop of trying the next cork once one gets
positively acked.
The previous recork timer queued up %cork messages without sending them.
It also relied on making sure pump timers didn't get set for recork bones.
This was fragile.
The new design enqueues up to one new %cork message per ship during each
recork timer, based on the state of the flow. If the flow is closing but
there are no outstanding messages in it, then it needs to be recorked.
Flows will be recorked in ascending numerical order by bone.
The condition got butchered during refactor: instead of avoiding the creation
of pump timers during recork wake, it was setting them _exclusively_ during
recork wake.
this refactors the parser for %brcn and %brpt to separate the optional
argument(s) from the required argument(s).
also adds +blab, which allows for a minor refactor of a couple other
arms as well as being used for %brcn and %brpt
Problem:
by-channel has its own copy of server-state from line 2182. discard-channel returns an altered state, with one channel removed from the state of by-channel.
but the state of by-channel isn't changing with each iteration, so |trim is only removing one channel per invocation.
Solution:
update by-channel on each iteration.
this commit replaces the previous intermediate parsing structure, $whit,
with a new one better suited for batch comments and taking into account
that {# %label} syntax is no longer being used anywhere. basically,
this makes it so that all doccords are batch comments, where if they are
preceded by a (list link) then they will try to attach to the given
link (only utilizes first link for now), and a blank link means it will
try to attach to the following hoon or spec
This is a temporary fix, and first part of the gall-request-queue-fix
release in two stages. This gives a publisher ship the ability to
understand a %cork and handle it properly, but no subscriber will
be sending %corks at this stage when leaving a subscription.
We still add a nonce to all subscription wires but it doesn't
increment it when resubscribing, allowing flows to be reused.
Tested locally with toy pub/sub agents and Group join/leaving
Previously, the initial Azimuth snapshot was stored in Clay and shipped
in the pill. This causes several problems:
- It bloats the pill
- Updating the snapshot added large blobs to Clay's state. Even now
that tombstoning is possible, you don't want to have to do that
regularly.
- As a result, the snapshot was never updated.
- Even if you did tombstone those files, it could only be updated as
often as the pill
- And those updates would be sent over the network to people who didn't
need them
This moves the snapshot out of the pill and refactors Azimuth's
initialization process. On boot, when app/azimuth starts up, it first
downloads a snapshot from bootstrap.urbit.org and uses that to
initialize its state. As before, updates after this initial snapshot
come from an Ethereum node directly and are verified locally.
Relevant commands are:
- `-azimuth-snap-state %filename` creates a snapshot file
- `-azimuth-load "url"` downloads and inits from a snapshot, with url
defaulting to https://bootstrap.urbit.org/mainnet.azimuth-snapshot
- `:azimuth &azimuth-poke-data %load snap-state` takes a snap-state any
way you have it
Note the snapshot is downloaded from the same place as the pill, so this
doesn't introduce additional trust beyond what was already required.
When remote scry is released, we should consider allowing downloading
the snapshot in that way.
changes $whit to have a (unit link) instead of (unit term). this holds
the identifier for where a comment is supposed to go. changes to parsers
in docs:vast to accomodate this.
this only allows for batch comments written for arms within a given
core. someday, the feature should allow you to write comments
virtually anywhere. the (unit link) in $whit should become a (unit (list
link)) to accommodate this
Because the publisher will send the cork plea back to the subscriber on
the next bone, we are not able to know the bone for the original cork.
To handle it, we add the cork bone to the plea path
still wip: it keeps resending the cork plea faster than its ~h1 timer
Removes the !: at the top of gall, so that it no longer gets included in traces about agent builds or crashes.
We also refine intentional crashes with ~_s, so that we still see a crash reason even if we don't get a full trace.
Lastly, flops the trace for +on-load crashes, which were getting printed bottom-first.
this is almost a revert of the commit that added in the %funk tag, but
not quite, so its a new commit. i apparently forgot that product docs
are actually built by +wrap, not +boog, so it was treating postfix
arm-docs as if they were product docs
Stale lanes may cause forwarding loops. Imagine the following:
1) Planet A is live. Galaxy B, its indirect sponsor, learns of its route.
2) A goes offline. Another ship, C, is started in its place, at the same route.
3) B receives a packet for A, forwards it to the known route.
4) C received the packet, forwards it to B.
5) Repeat from 3.
Here, we update the forward lane(s) scry used by the runtime to not produce a
peer's lane if they haven't communicated with us in the last hour. Everyone's
supposed to ping their sponsorship chain every 30 seconds. If those aren't
going through, you shouldn't expect to be reachable anyway.
We may or may not want to update +send-blob to match.
Previously, if the pointer for a syntax error pointed to the end of the file
(and the file ended in a newline) the code snippet rendering would try to
display a line _beyond_ the end of the file, causing a crash.
Here, we detect that case, and display `<<end of file>>` instead.
This accounts for a possible race condition where ames expects a
response, but regresses into the larval state. Upon receiving the
$sign on +take, we would remain stuck as a larva. Now we check
that we have enough information to re-evolve and then start a
/larval timer to begin draining the queue.
Previously we stored the nonce in $boat, which changed the $bowl of each
agent. This compiles and all agents reload, but more testing is needed.
It also renames inbound/outbound watches to $bitt/$boat.
Previously we were dropping events that used old
wires that lacked a rift in them. This seems a
bad behavior because we don't want to destroy a
flow that has not been processed by both ends.
Note: pending a fix to test-old-ames-wire
This converts the blob store from having deltas, directs, and
tombstones, to just having direct pages. This simplifies a lot of code,
since we don't have to constantly ensure that deltas always have their
parent available.
This removes the hardcoded text diff logic from clay, which was
previously required for bootstrapping.
Over the wire, we handle both old and new requests and responses
transparently, so communication is normal in both directions across
ships which do or do not have this change.
this was wiping out some comments buried that weren't written at the top
of an arm. not sure if this is used in another fashion that will create
issues, so I just commented it out to help remember that it used to be
there in case it needs further changes, like if I should actually skip
%know and %made notes but not %help notes
We had trie operations independently implemented in +de in arvo,
+an:cloy in zuse, +zu in clay, lib/trie, and app/spider. This unifies
them all into +de in arvo, aggregating the used operations.
docs written above an arm are now distinguishable in the AST from
docs written above the product of the arm, by tagging docs written
above the arm with a %funk link
This crashed at runtime when `a` is null because it tried to instantiate
`meg`, and that means bunting its argument, and that calls `node`, where
the assert failed.
Wet gates use the bunt of their formal argument, so we use that.
%rez has always used "width & height". Certainly, "x & y" is more
standard than "row & column". As such, we settle on making %hop and %hit
respect the more natural ordering. This change is safe because these
interfaces haven't made it to livenet yet.
