Somehow we ended up with flows which expected to awaken but did not wake
up. This was likely caused by the error in r920j OTA, urbit-os-v1.0.18.
This adds a command which ensures that every flow has an active timer.
I expect this to be needed only once, but it's a pretty general tool, so
it's worth keeping.
I've included an unused @t parameter to more easily add simple debug
commands to ames without having to add a new task
The subscription changes in drum broke existing subscriptions. This
worked alright (though loud) for dojo, but it left chat-cli "frozen"
unless you manually unlinked/relinked. This does that automatically.
It also includes a refactoring of +on-load in drum, to avoid vain
repetition.
We need to get updates directly into %home in case the marks depend on
changes to hoon.hoon. %base has no reason to exist.
Our ota strategy is now to merge from parent/kids to home, then
parent/kids to kids.
Makes it so that |cancel %force skips the next thing in the queue if
you're not in the middle of something. If you are in the middle of
something, it skips the thing you're in the middle of (just like naked
|cancel).
This should resolve issues where |cancel doesn't drain the queue.
When a ship breaches, we remove all messages that have yet to be
delivered to an app (eg if it's not yet started). We also add
|gall-sear to do this manually, but this shouldn't be needed in normal
operation.
Finally, to unblock ~zod and ~bus on mainnet, we sear one particular
ship automatically on loading hood. It cannot be done manually because
no userpace changes can be made until it's unblocked.
Instead of providing a (unit path), allows for (list path), which better
supports the "update to path and subpath cases".
For example, if /things wants updates about everything, and
/things/specific wants updates about the specific thing, they'll both
need to receive a %fact when the specific thing changes.
Previously, these would have been two separate moves. Now, gall handles
the multi-targeting for you.
OTAs commonly end up in an inconsistent state if apps depend on changes
to /sys. For example, the %sift changes break on OTA because %spider
needs to be reloaded so that it's aware of the new thread type. This
adds a %goad app, which reloads all apps after every change to /sys.
Getting this to start OTA is nontrivial, but this pattern should work
for apps in the future. The changes to clock shouldn't generally be
necessary; they are only necessary here because we can't rely on hood to
start goad, since hood fails to compile if it's run before zuse is
reloaded. Once goad is active, this will cease to be a problem.
Turns out this wasn't a regression, it was intended behavior. I
continue to believe it's the wrong behavior, but that will require a
longer discussion.
This broke when %kick was handled by resubscribing on your own ship
because it processed the %kick before the %leave. For example, `@t`404
at the dojo would put the dojo in an unworkable state.
You want the %leave to be processed first because you can't do a
"resubscribe" in response to that.
* origin/invite-app:
chat-hook: upgrade from old state and perform invitatory creation and subscription
invite-hook: crash upon invalid invite received
changed invite peek interface to /:path/:uid
invite: add comments and clean up
chat-js: added invite functionality
chat-hook: added invite functionality
app: added invite app and mark converters to JSON
Signed-off-by: Jared Tobin <jared@tlon.io>
* eth-watcher-2: (21 commits)
eth: move existing chain requests into ethio
eth-watcher: refactor refresh rate to top of file
hook: add pool-group-hook for making invite groups
ethio: add +read-contract for chain state reading
zuse: add delegated-sending address
eth: move eth-watcher's request-rpc into ethio lib
gaze: make compile for latest eth-watcher
drum: start eth-watcher on boot
azimuth-tracker: remove deprecated generator
eth: implement azimuth-tracker using eth-watcher
eth-watcher: ensure logs always sent oldest-first
eth-watcher: allow peers to unconfigured watchdogs
eth-watcher: saner %watch behavior
eth-watcher: implement %clear poke
eth-watcher: store logs in state to implement peer
eth-watcher: move types into /sur file
eth-watcher: properly tag out-peer-data
eth-watcher: single update timer loop
eth-watcher: implement /block peek
eth: turn azimuth-tracker into eth-watcher
...
Signed-off-by: Jared Tobin <jared@tlon.io>
This stops slogging the tab completion and intead adds a +sole-effect
for tab completion output. This is morally correct, and it lets dojo
clients show tab completions how they want. For example, web dojo could
implement this as a drop-down box.
Another advantage is that this puts the rendering logic in drum, which
knows the width of the terminal. Thus, we can make sure each match
takes no more than one line by truncating with ellipses. If there's
only one match and it's already fully typed, then we display the whole
type.
This is initial support for type-aware tab completion. When you hit tab, it tries to complete the word you're in the middle of using a face or arm in the subject at that point in the code. It also shows all possible matches and their associated types. It's nearly instantaneous. Notes:
- It advances to the longest common prefix, so if you hit tab on `ab` and the only possible results are `abcde` and `abcdz`, then it'll write `abcd` and print both out (with their types).
- If there are fewer than ten matches, it prints the type along with the face. Printing types is too slow to use all the time, but with 10 it's essentially instantaneous.
- The match closest in the subject to you (i.e. smallest axis number) is displayed lowest (closest to your focus).
Examples below, where `<TAB>` represents me hitting tab while my cursor is at that position (the line with the `<TAB>` is not preserved in the actual output).
```
~zod:dojo> eth<TAB>
-----
ethereum #t/<11.qcl {<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141> <21.yeb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>
ethereum-types #t/<3.ltb 27.ipf 7.ecf 36.uek 92.bjk 247.ows 51.mvt 126.xjf 41.mac 1.ane $141>
~zod:dojo> ethereum
~zod:dojo> |= zong=@ud z<TAB>
-----
zing #t/<1.dqs {* <126.xjf 41.mac 1.ane $141>}>
zap #t/<1.iot {tub/{p/{p/@ud q/@ud} q/""} <1.rff {daf/@t <247.ows 51.mvt 126.xjf 41.mac 1.ane $141>}>}>
zuse #t/$309
zong #t/@ud
~zod:dojo> |= zong=@ud zo<TAB>
-----
zong #t/@ud
~zod:dojo> |= zong=@ud zong
~zod:dojo> <TAB>
hoon-version
trel
quip
pole
unit
qual
lone
... about 600 more lines ...
unity
html
zuse
eny
now
our
~zod:dojo>
```
Functionally, this is in a state where I'd be comfortable shipping it. It doesn't interfere with anything if you don't press tab, and it's perfectly OTA-able. I do think its output is a little verbose, but that can be tuned over time as people try it and determine what feels good in practice.
Additional notes:
- There are plenty of similar systems for other languages, but my most direct inspiration is Idris's editor tools. This is implemented for the dojo, but I actually want it in my editor, which is why the meat is all defind in a library. I've only tested on dojo one-liners, so I don't know the performance on large blocks of code.
- The default type printer isn't great for this use case. In particular,
- Cores should not print anything about their context
- The `#t/` should go away
- If it looks like a gate, we should print its return value
- Maybe special handling for molds, but if the above is done, then for example `bone` is `* -> @ud`.
- The worst part about our wing ordering is that it really screws up tab completion. You want to do `point.owner-address` instead of `owner-address.point` because that lets you type `point.ow<TAB>`. I weakly prefer reading it how we do it now, but it's really not great. You could do an (dojo-specific?) alternate syntax of `point;owner-address`; this is a simple transformation.
- Regardless of the above, this should handle the case where we're in the middle of defining a wing; it doesn't right now.
- When a variable is shadowed, we show both of them. We should probably show the shadowed one with a `^`.
- We probably shouldn't print out hundreds of results. Maybe just the closest 50 with ellipses.
- This gets you any face in your subject, regardless of whether its type is reasonable. We could limit that some by copying the `gol` logic in mint, so that if the pseudo-backward-inference engine happens to know what type it should be, you can filter the tab results according to if they nest in that type. This would be "strongly type-aware".
* jt-gall-refactor: (76 commits)
gall: fix issue id in comment
pills: update solid
gall: handle foreign coup success
gall: only print peek bad result if bad
gall: add basic test harness
pills: update solid, brass, ivory
gall: fix obvious nest-failing tisdot
gall: change '-state' to '-core' for +mo and +ap
zuse, gall: deprecate 'club'
zuse, gall, eyre: deprecate 'cush'
zuse, gall, eyre, dojo: deprecate 'cuft'
gall: remove slam-related printfs
gall: remove deprecated 'mak' from 'agents'
gall: use less vertical spacing throughout
gall: add comment re: unpopulated wex
gall: use less vertical separation when wuthepping
gall: fix whitespace
gall: don't define 'move' as a pair
gall: don't give faces to tags
gall: gut some unused stuff
...
