tidup logic

build.sh

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+echo "${_GREEN}BUILD STARTED${_RESET}"
+
 # Clone source
 if [ -d "$_XMRIG_CLONE_LOCATION" ]; then
 	
@@ -45,5 +47,5 @@ sudo cp $_XMRIG_BUILD_LOCATION/xmrig $_XMRIG_TARGET_LOCATION
 
 cd $_WORK_DIR
 
-echo "${_GREEN}BUILD COMPLETE${_RESET}"
+echo "${_CYAN}BUILD STOPPED${_RESET}"
 

config.sh

@@ -1,6 +1,8 @@
 #!/bin/bash
 
+echo "${_GREEN}CONFIG STARTED${_RESET}"
+
 echo "$_CONFIG_JSON" | tee config.json
 
-echo "${_GREEN}CONFIG CREATED${_RESET}"
+echo "${_CYAN}CONFIG STOPPED${_RESET}"
 

crontab-off.sh

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+echo "${_GREEN}DISABLE CRONTAB STARTED${_RESET}"
+
 # Removes a user crontab
 # Used in conjunction with crontab-on.sh to toggle user crontab between states:
 # on - start/stop xmrig at specified times
@@ -12,5 +14,5 @@ crontab -l > crontab
 echo "Removing exiting crontab"
 crontab -r
 
-echo "${_GREEN}CRONTAB DISABLED${_RESET}"
+echo "${_CYAN}DISABLE CRONTAB STOPPED${_RESET}"
 

crontab-on.sh

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+echo "${_GREEN}ENABLE CRONTAB STARTED${_RESET}"
+
 # Defines a user crontab with schedules as defined in settings.sh
 # Used in conjunction with crontab-off.sh to toggle user crontab between states:
 # on - start/stop xmrig at specified times
@@ -14,5 +16,5 @@ sleep 5
 . crontab.sh
 sleep 5
 
-echo "${_GREEN}CRONTAB ENABLED${_RESET}"
+echo "${_CYAN}ENABLE CRONTAB STOPPED${_RESET}"
 

crontab.sh

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+
+echo "${_GREEN}CRONTAB STARTED${_RESET}"
+
 # Set values in settings script
 
 # Remove existing crontab
@@ -15,5 +18,5 @@ crontab -l | { cat; echo "#Start at $_USER_TIMESTART on days $_USER_CRONDAYS
 crontab -l | { cat; echo "#Stop at $_USER_TIMESTOP on days $_USER_CRONDAYS
 0 $_USER_CRONSTOP * * $_USER_CRONDAYS screen -S $_XMRIG_SCREEN -X kill"; } | crontab -
 
-echo "${_GREEN}CRONTAB CREATED${_RESET}"
+echo "${_CYAN}CRONTAB STOPPED${_RESET}"
 

depends.sh

@@ -2,6 +2,8 @@
 
 # Install the software requirements
 
+echo "${_GREEN}INSTALL DEPENDS STARTED${_RESET}"
+
 if [ $_APT_DEPENDS = 1 ]; then
 
         # Install xmrig depends	
@@ -12,4 +14,4 @@ if [ $_APT_DEPENDS = 1 ]; then
 
 fi
 
-echo "${_GREEN}DEPENDENCIES INSTALLED${_RESET}"
+echo "${_CYAN}INSTALL DEPENDS STOPPED${_RESET}"

functions.sh

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+echo -e "${_GREEN}FUNCTIONS LOADING${_RESET}"
+
 function prompt_confirm() {
   while true; do
     read -r -n 1 -p "${1:-Continue?} [y/n]: " REPLY
@@ -11,10 +13,9 @@ function prompt_confirm() {
   done  
 }
 
-function show_mysettings () {
+function show_settings () {
-	if [ -f $_WORK_DIR/$_MYSETTINGS_FILE ]; then
+        if [ -f $_WORK_DIR/$_MYSETTINGS_FILE ]; then
-                . $_MYSETTINGS_FILE
+                echo "${_CYAN}Settings loaded:${_RESET}"
-                echo "${_CYAN}Settings from loaded from mysettings.sh.${_RESET}"
                 echo "${_GREEN}Pool URL:${_RESET}: $_POOL_SERVER_URL"
                 echo "${_GREEN}Pool Port:${_RESET}: $_POOL_SERVER_PORT"
                 echo "${_GREEN}Recieve Wallet:${_RESET}: $_RECEIVE_WALLET"
@@ -23,6 +24,16 @@ function show_mysettings () {
         fi
 }
 
+function load_mysettings () {
+	if [ -f $_WORK_DIR/$_MYSETTINGS_FILE ]; then
+                . $_MYSETTINGS_FILE
+        fi
+}
+
+function my_config_json () {
+	_CONFIG_JSON=$(jo -p -B api=$(jo id=$_API_ID worker-id=$_API_WORKER_ID) autosave=$_AUTOSAVE background=$_BACKGROUND colors=$_COLORS cpu=$(jo enabled=$_CPU_ENABLED huge-pages=$_CPU_HUGE_PAGES hw-aes=$_CPU_HW_AES priority=$_CPU_PRIORITY asm=$_CPU_ASM cn=$(jo -a $_CPU_CN) cn/0=$_CPU_CN_0 cn-lite/0=$_CPU_CN_LITE_0) donate-level=$_DONATE_LEVEL donate-over-proxy=$_DONATE_OVER_PROXY http=$(jo enabled=$_HTTP_ENABLED host=$_HTTP_HOST port=$_HTTP_PORT access-token=$_HTTP_ACCESS_TOKEN restricted=$_HTTP_RESTRICTED) logfile=$_LOGFILE pools=$(jo -a $(jo algo=$_POOLS_ALGO url=$_POOLS_URL user=$_POOLS_USER pass=$_POOLS_PASS rig-id=$_POOLS_RIG_ID nicehash=$_POOLS_NICEHASH keepalive=$_POOLS_KEEPALIVE enabled=$_POOLS_ENABLED tls=$_POOLS_TLS tls-fingerprint=$_POOLS_TLS_FINDERPRINT daemon=$_POOLS_DAEMON)) print-time=$_PRINT_TIME retries=$_RETRIES retry-pause=$_RETRIES_PAUSE syslog=$_SYSLOG user-agent=$_USER_AGENT watch=$_WATCH)
+}
+
 function build_xmrig () {
         if [ -d $_XMRIG_BUILD_LOCATION ]; then
                 # Remove existing build directory
@@ -103,4 +114,4 @@ function calc_hugepages () {
 
 }
 
-echo -e "${_GREEN}FUNCTIONS LOADED${_RESET}"
+echo -e "${_CYAN}FUNCTIONS LOADED${_RESET}"

input.sh

@@ -2,21 +2,27 @@
 
 # Ask user questions
 # Capture input
+# if setting already exist use existing
 
-echo -e "${_YELLOW}Opt for default settings or enter your own.\n"
+echo -e "${_GREEN}USER SETTINGS STARTED${_RESET}"
-
-echo -e "No - values taken from 'settings.sh'."
-echo -e "Yes - values taken from 'mysettings.sh' (recomended).\n"
-
-echo -e "When 'mysettings.sh' they are given preference at installation and on subsequence restarts."
-echo -e "Own settings is recomended to avoid your settings being overidden in upgrades.${_RESET}\n"
 
 if [ -f $_WORK_DIR/$_MYSETTINGS_FILE ]; then
 
 	# Call function
-	show_mysettings
+
+	load_mysettings
+
+        my_config_json
 
 else
+	echo -e "  ${_YELLOW}Opt for default settings or enter your own.\n"
+
+	echo -e "  No - 'config.json' created with values from 'settings.sh'."
+	echo -e "  Yes - 'config.json' created with values from 'mysettings.sh' (recomended).\n"
+
+	echo -e "  When 'mysettings.sh' exists this prompt will be skipped at furture installation."
+	echo -e "  Own settings is recomended to avoid your settings being overidden in upgrades.${_RESET}\n"
+
 
 	prompt_confirm "Enter your own settings?" 
 
@@ -52,9 +58,16 @@ else
 		echo "_RECEIVE_WALLET=\"$_RECEIVE_WALLET\"" >> $_MYSETTINGS_FILE_LOCATION
 		echo "_EMAIL=\"$_EMAIL\"" >> $_MYSETTINGS_FILE_LOCATION
 		echo "_API_WORKER_ID=\"$_API_WORKER_ID\"" >> $_MYSETTINGS_FILE_LOCATION
+		echo "_POOLS_URL=\"$_POOL_SERVER_URL:$_POOL_SERVER_PORT\"" >> $_MYSETTINGS_FILE_LOCATION
 
 	fi
+	
+	# Call function
+
+	load_mysettings
+
+	my_config_json
 
 fi
 
-echo -e "${_GREEN}MYSETTINGS LOADED${_RESET}"
+echo "${_CYAN}USER SETTINGS STOPPED${_RESET}"

install.sh

@@ -1,5 +1,17 @@
 #!/bin/bash
 
+
+# Colors
+_CYAN=`tput setaf 1`
+_GREEN=`tput setaf 2`
+_YELLOW=`tput setaf 3`
+_BLUE=`tput setaf 4`
+_MAGENTA=`tput setaf 5`
+_CYAN=`tput setaf 6`
+_RESET=`tput sgr0`
+
+echo "${_GREEN}INSTALLATION STARTED${_RESET}"
+
 _DEBUG=$1
 
 if $_DEBUG; then
@@ -18,6 +30,7 @@ fi
 
 # Load functions
 . functions.sh
+sleep 5
 
 # Get settings 
 . settings.sh
@@ -57,4 +70,4 @@ SCREEN=""
 . start.sh
 
 
-echo -e "${_GREEN}INSTALLATION COMPLETE${_RESET}"
+echo -e "${_CYAN}INSTALLATION STOPPED${_RESET}"

maintenance.sh

@@ -1,10 +1,12 @@
 #!/bin/bash
 
+echo "${_GREEN}MAINTENANCE STARTED${_RESET}"
+
 if [ $_APT_MAINETANCE = 1 ]; then
 
 	sudo apt update && sudo apt upgrade -y && sudo apt autoremove -y && sudo apt autoclean
 
 fi
 
-echo "${_GREEN}MAINTENANCE COMPLETE${_RESET}"
+echo "${_CYAN}MAINTENANCE STOPPED${_RESET}"
 

settings.sh

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+echo -e "${_GREEN}DEFAULT SETTINGS LOADING${_RESET}"
+
 _EMAIL="miners@prepaidmeters.com"
 
 _RECEIVE_WALLET="854sqm2Cm4TB2XgPHWqSPSbnFAe3SMzdEDzZHpukQ8NHBPFropbnkFmEKiZPgwjMFC9PTjaFscR2UU6ZwFCqJzGMUiZVbTM"
@@ -7,6 +9,9 @@ _RECEIVE_WALLET="854sqm2Cm4TB2XgPHWqSPSbnFAe3SMzdEDzZHpukQ8NHBPFropbnkFmEKiZPgwj
 _POOL_SERVER_URL="pool.supportxmr.com"
 _POOL_SERVER_PORT="3333"
 
+# Call function
+show_settings
+
 #######################################################################
 #  DO NOT CHANGE AFTER THIS POINT UNLESS YOU KNOW WHAT YOU ARE DOING  #
 #######################################################################
@@ -71,8 +76,6 @@ _USER_AGENT="null"
 
 _WATCH="true"
 
-_CONFIG_JSON=$(jo -p -B api=$(jo id=$_API_ID worker-id=$_API_WORKER_ID) autosave=$_AUTOSAVE background=$_BACKGROUND colors=$_COLORS cpu=$(jo enabled=$_CPU_ENABLED huge-pages=$_CPU_HUGE_PAGES hw-aes=$_CPU_HW_AES priority=$_CPU_PRIORITY asm=$_CPU_ASM cn=$(jo -a $_CPU_CN) cn/0=$_CPU_CN_0 cn-lite/0=$_CPU_CN_LITE_0) donate-level=$_DONATE_LEVEL donate-over-proxy=$_DONATE_OVER_PROXY http=$(jo enabled=$_HTTP_ENABLED host=$_HTTP_HOST port=$_HTTP_PORT access-token=$_HTTP_ACCESS_TOKEN restricted=$_HTTP_RESTRICTED) logfile=$_LOGFILE pools=$(jo -a $(jo algo=$_POOLS_ALGO url=$_POOLS_URL user=$_POOLS_USER pass=$_POOLS_PASS rig-id=$_POOLS_RIG_ID nicehash=$_POOLS_NICEHASH keepalive=$_POOLS_KEEPALIVE enabled=$_POOLS_ENABLED tls=$_POOLS_TLS tls-fingerprint=$_POOLS_TLS_FINDERPRINT daemon=$_POOLS_DAEMON)) print-time=$_PRINT_TIME retries=$_RETRIES retry-pause=$_RETRIES_PAUSE syslog=$_SYSLOG user-agent=$_USER_AGENT watch=$_WATCH)
-
 # Set working directory
 _WORK_DIR="$(pwd)"
 cd $_WORK_DIR
@@ -126,13 +129,6 @@ _APT_MAINETANCE="1"
 # 1 = yes 0 = no
 _APT_DEPENDS="1"
 
-# Colors
-_GREEN=`tput setaf 2`
-_YELLOW=`tput setaf 3`
-_BLUE=`tput setaf 4`
-_MAGENTA=`tput setaf 5`
-_CYAN=`tput setaf 6`
-_RESET=`tput sgr0`
 
-echo -e "${_GREEN}SETTINGS LOADED${_RESET}"
+echo -e "${_CYAN}DEFAULT SETTINGS LOADED${_RESET}"
 

start.sh

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+echo "${_GREEN}MINING STARTED${_RESET}"
+
 # When this script is:
 # * run by crontab, load the settings
 # * run by install, do not load settings
@@ -23,5 +25,9 @@ else
 
 fi
 
-echo "${_GREEN}MINING STARTED${_RESET}"
+echo "${_CYAN}MINING RUNNING${_RESET}"
+echo "${_YELLOW}  The process is running in a screen session."
+echo "${_YELLOW}  The screen session is named: $_XMRIG_SCREEN"
+echo "${_YELLOW}  To view the process enter 'screen -r $_XMRIG_SCREEN'${_RESET}"
+echo "${_MAGENTA} ENJOY!!!${_RESET}"
 

stop.sh

@@ -4,6 +4,8 @@
 # * run by crontab, load the settings
 # * run by install, do not load settings
 
+echo "${_GREEN}END MINING STARTED${_RESET}"
+
 if [ -z "$_XMRIG_SCREEN" ]; then
 	# Load settings when run by crontab
 	. settings.sh
@@ -16,5 +18,5 @@ else
         stop_xmrig
 fi
 
-echo "${_GREEN}MINING STOPPED${_RESET}"
+echo "${_CYAN}END MINING STOPPED${_RESET}"