Before performing the insertion, InsertCompleter::insert calls
try_accept() to accept any selected completion candidate. If there
is one, we fire InsertCompletionHide. If that one modifies the register
used by <c-r>, the inserted StringViews will be dangling.
Fix this by running try_insert first, and read from the register later.
Note that we call try_accept() twice but that's fine.
It would probably make more sense to copy the register before calling
insert() but I don't think it matters.
Closes#5220
A common pattern is for info/echo messages to be generated by idle
hooks but the clearing of previous info/echo was done immediately on
normal mode events. This led to flickering of the info box especially
when a hook was repeatidly generating the same info (like moving
a cursor in the same word where the hook reacts to the word under
the cursor).
Make last insert and macro recording closer together, paving the
way towards moving last insert to a register.
Use a FunctionRef for insert completer key insertion support.
This fixes an issue with the following hooks:
hook global InsertCompletionShow .* %{ map window insert <tab> <c-n> }
hook global InsertCompletionHide .* %{ unmap window insert <tab> <c-n> }
When repeating a last insert using <tab> to select a completion, it
inserts a <tab> instead of selecting, then the insert completion tries
to erase the inserted text with backspaces but fails to totally do that
as it erases the tab character first.
We do not typically go into lengthy explanation of the code in the
support scripts. This would have a performance impact (as comments
are not trimmed in advance) and feels out of place.
The current python filetype module treats a single empty comment line
(typically created by hitting enter twice while in a block comment) as
the end of a block comment, deleting the empty comment and ending
comment prefix copying. This runs contrary to PEP8, which explicitly
allows for paragraphs in block comments, with an empty comment as the
paragraph separator.
This change implements support for using a single empty comment as a
paragraph separator, with two consecutive empty comments being treated
as the end of the block comment; both empty comment lines are deleted
and comment prefix copying is ended.
ASan shows that we resolve a face spec owned by a freed stack variable.
=================================================================
==2263300==ERROR: AddressSanitizer: stack-use-after-return on address 0x7a9316c33918 at pc 0x633ea421d8ea bp 0x7ffca001e980 sp 0x7ffca001e970
READ of size 8 at 0x7a9316c33918 thread T0
...
#6 0x633ea421d8e9 in Kakoune::FaceRegistry::resolve_spec(Kakoune::FaceSpec const&) const src/face_registry.cc:128
...
Address 0x7a9316c33918 is located in stack of thread T0 at offset 2328 in frame
#0 0x633ea427a095 in operator() src/commands.cc:2267
This frame has 26 object(s):
[32, 36) '<unknown>'
...
[544, 560) 'disable_hooks' (line 2269)
...
[928, 2432) 'local_scope' (line 2271) <== Memory access at offset 2328 is inside this variable
tabs <-> space conversion functions did not create a ScopedEdition
leading to uncommited modifications. Fixing this did fix the
interactive error, but that error still existed in non interactive
context so redo now considers there there is no redo child if there
are uncommited modifiations (which is correct as this means we are
currently creating a new leaf in the undo tree)
Fixes#5124
Only record non-synthetized insertions, removing the need to
re-record on replay and fixing the last replay getting dropped by
macro execution.
Fixes#5122
<c-n>/<c-p> handling in insert was always dropping the last key in
the last_insert() vector (in order to replace it with the actual
completion text inserted), this was not valid for synthetized keys
that are not added to that vector in the first place.
Take the opportunity to merge insert completion handling code between
<c-n>/<c-p> and direct menu selection.
Fixes#5120
The wrap highlighter was pulling all lines until the cursor, regardless
of whether the cursor was going to be made visible, this could lead to
a display buffer containing much more lines than the actual viewport
which eventually could lead to menu being anchored out of view that
was leading to past-the-end buffer accesses.
Fix the wrap higlighter not to pull lines up to the cursor when it
is not tasked with making the cursor visible, and always trim the
eventual extra lines after highlighting.
Fixes#5118
After extracting the whole buffer content, a line can end up with
only non-range highlgihters pending which makes its range become
0.0,0.0, after running highlighting on the extracted range it gets
re-inserted but taking the min of existing range and inserted range
wrongly returns 0.0. Avoid this by detecting that the 0.0,0.0 range
does not actually mean anything when we have no ranged atoms.
Fixes#5001
Insert repeat will now only record non-synthesized keys, and when played back
execute mappings as well. Constructing some tests, and with the specific goal
of fixing https://github.com/alexherbo2/auto-pairs.kak/issues/38, this appeared to
be the best approach. Other options could be evaluating the maps only when recording,
but this gave other issues (see tests/normal/repeat-insert/repeat-insert-mapped)
At this point, repeat-insert may be essentially just a hardcoded macro, at least I
haven't identified the difference. If this really is the case, it may make sense to
give it a dedicated register, and implement it as a macro.
Fixes#3600
This test fails occasionally[1] because the order of events and the
number of events varies across runs.
We should always call draw_status exactly 3 times:
[*git*][fifo]
[*git*]
Commit subject etc. [*git*]
Let's check it this way.
This seems to work; this time I took the time to run it a couple
hundred times and in Cirrus CI.
[1] https://builds.sr.ht/~mawww/job/1151239
When running git blame in a "git show" buffer, we annotate the youngest
version of the file that has the line referenced by the diff line
at cursor.
In case the cursor is on an added or context line, we simply show
the version from the surrounding commit.
When the cursor is on a deleted line, we show the parent commit,
which still has the deleted line. However there is a bug: we use
the line number in the new version of the file. Fix that.
Commit 53d9b9b67 (Escaping tweak in git.kak, 2024-02-06) broke
blame-jump when the commit subject contains a single quote.
(Also on unbalanced "{" which is a rare edge case but we already have
it in our Git history.)
git.kak assumes that filenames don't contain ' or unbalanced {,
but we can't really make that assumption about people's names or
commit subjects.
Unfortunately the escaping here is very messy. We need to pass
arbitrary text to callbacks; maybe we should have closures that can
capture private temporary registers.
Internally, all lines have a trailing "\n".
Buffers created empty (like fifo buffers) start with a single line.
When reading data into fifo buffers, we insert *before* the last line's
trailing newline ("last newline"). This enables autoscrolling (enabled
with "edit -scroll") as long as the cursor is on the last newline.
When autoscrolling is disabled, we have a special case to insert
*after* the last newline. This means that a cursor on that newline
won't be moved. Then we transplant the newline character from the
beginning to the end of the buffer. This special case happens only on
the very first fifo read; on subsequent reads, the cursor at position
1.1 will not be moved anway because insertions happen below 1.1.
Since we always insert (effectively) before the last newline, fifo
buffers have a trailing empty line.
For autoscrolling buffers this seems correct; it gives users an
obvious way to toggle autoscrolling.
For non-scrolling buffers the newline is redundant. Remove it.
This requires keeping track of whether the last newline comes from
the fifo, or was added by us. The shortest fix I could find
is to always append to the buffer if not scrolling, and then delete
the added newline character if applicable.
m_buffer.insert(m_scroll ? pos : m_buffer.next(pos), StringView(data, data+count));
if (not m_scroll and not m_had_trailing_newline)
m_buffer.erase(pos, m_buffer.next(pos));
maybe that's the best fix overall; but erasing at the end seems better
than erasing in the middle, so do that whenever possible.
Reported in https://lists.sr.ht/~mawww/kakoune/%3CZbTK7qit9nzvrMkx@gmail.com%3E
When "edit -fifo" reads data without a trailing newline, the fifo
buffer will not have a trailing blank line. But if there is a trailing
newline, we will get a trailing blank line. This is weird because the
trailing blank line exists for scrolling, it should not be determined
by the data read.
Add a test case to demonstrates the inconsistency which is fixed by
the next patch.
Patches as produced by "git format-patch" have a trailing signature
that is separated from the body by a line with "-- " on it. By default
it contains the Git version. We erroneously include this signature
in the diff we pipe to patch, which fails to apply as a result.
Add a targeted fix to suppress these signatures.
Since :patch transforms its inputs into context-only lines, we can
easily get into a state where a file diff has only context lines.
git apply does not accept a "diff" without any hunk, so let's skip
that.
This test doesn't care about testing things like "if I send the next
key before we have finished reacting to the previous ones, nothing
bad ever happens".
Hence we can until exhaustion after each input. This should fix
bespoke flakiness. The handling of "c<esc>" should be atomic.
This reasoning probably applies to most tests; waiting for all events
seems like the safest and easiest approach overall (compared to sleep
or sleep-until). The downside is that the tests need changes when
UI code changes but it rarely does, and if it does we can automate
the updates.
Closes#5073
Read output from the script as it comes and update the candidate
list progressively.
Disable updating of the list when a completion has been explicitely
selected.
ensure cursor is visible after user input except if the command
implementation opted-out. Hooks and timers should not enforce
visible cursor.
PageUp/PageDown and `<c-f>` / `<c-b>` commands still move the cursor
as this seemed a desired behaviour.
This is currently broken on various corner cases and breaks the
"master branch should be good for day to day work" implicit rule,
ongoing work to stabilize this feature will take place on the
no-cursor-move-on-scroll branch until its deemed ready.
This reverts commit 1e38045d70.
Closes#4963
Kakoune now does not touch cursors when scrolling. It checks
if either the buffer or selections has been modified since
last redraw.
Fixes#4124Fixes#2844
The current exponential behaviour does not seem that useful, it seems
more predictible that pressing `+` twice would end up with 3 copies
of the original selections instead of 4.
Fixes#4533
Do not rely on timing but wait for Kakoune to redraw which is what
we actually need: Mouse clicks rely on the current display buffer
to resolve the buffer location, so we need to wait for a redraw
to happen with `ui_out`
Commits e49c0fb04 (unmap: fail if the mapping is currently executing,
2023-05-14) 42be0057a (map: fail if key is currently executing,
2023-06-24) fixed potential use-after-free issues. By doing so,
it broke configurations that in practice have not triggered any
crashes [1] [2].
For example with,
set -remove global autocomplete insert
hook global InsertCompletionShow .* %{
map window insert <esc> <c-o>
}
hook global InsertCompletionHide .* %{
unmap window insert <esc> <c-o>
}
The execution of the <esc> mapping triggers InsertCompletionHide fails
at unmapping. This seems legit and I don't see an obvious alternative
way to write it (InsertIdle would not be correct though it would work
in practice).
Fix the regression by allowing map and unmap again while keeping the
mappings alive until they have finished executing.
Applying map/unmap immediately seems like the most obvious semantics.
Alternatively, we could apply them in between key presses.
[1]: <https://github.com/kak-lsp/kak-lsp/issues/689>
[2]: <https://github.com/alexherbo2/auto-pairs.kak/issues/60>
If during execution of a mapping, that same mapping is replaced,
there is undefined behavior because we destroy a mapping that we are
still iterating over.
I have been using this mapping inside my kakrc to re-source the kakrc.
map global user s %{:source "%val{config}/kakrc"<ret>} -docstring 'source "%val{config}/kakrc"'
Now <space>s happens to not trigger undefined behavior because the
mapping stays the same.
However it triggers an assertion added by Commit e49c0fb04 (unmap:
fail if the mapping is currently executing, 2023-05-14), specifically
the destructor of ScopedSetBool that guards mapping execution.
Fix these by banning map of a key that is executing, just like we
did for unmap.
Alternative solution: we could allow mapping (and even unmapping)
keys at any time and keep them alive by moving them into a trash can,
like we do for clients and others.
When a line only contains non-range atoms we can end-up accessing
past the end atom.
Add a test that shows the issue when run with valgrind, it is
unfortunately quite hard to trigger a crash because the invalidly
accessed byte usually leads to the correct code path being taken
(when != DisplayAtom::Range) so we have only 1 in 255 chance of
triggerring a crash.
Fixes#4927
In some cases such as with folding we can end-up with regions
not having any atoms to highlight which can trigger a crash as
we assume display buffers not to be empty
Fixes#4926
