mirror of
https://github.com/mawww/kakoune.git
synced 2024-12-28 22:22:41 +03:00
fe5f357446
This commit is an attempt at mitigating stray processes and temporary directories, which pile up in the process tree and `$TMPDIR` over time. To reproduce the issue, run the `lint` command in rapid successions, or simply run `:lint; lint; lint;` in the prompt (two consecutive calls are enough to trigger the bug). The first call creates a `\*lint-ouput*` buffer, bound to a named pipe that will be populated later on in an asychronous shell process. It's that same process that runs the linter afterward, and as soon as it has been spawned, the following call to `:lint` is executed. Each call to `:lint` overrides the path to the named pipe that was assigned to `\*lint-output*` by the previous one, resulting in several asynchronous processes (that write diagnostics to the pipe) hanging forever — the pipe is never read, and so the process idles. The command that removes the temporary directory follows the one that writes to the named pipe, it's never called in the above scenario, which additionally results in `kak-lint.XXXXXXXX` directories being left behind in `$TMPDIR`. (Also) Fixes #3681.
453 lines
15 KiB
Plaintext
453 lines
15 KiB
Plaintext
declare-option \
|
|
-docstring %{
|
|
The shell command used by lint-buffer and lint-selections.
|
|
|
|
See `:doc lint` for details.
|
|
} \
|
|
str lintcmd
|
|
|
|
declare-option -hidden line-specs lint_flags
|
|
declare-option -hidden line-specs lint_messages
|
|
declare-option -hidden int lint_error_count
|
|
declare-option -hidden int lint_warning_count
|
|
|
|
declare-option -docstring "name of the client in which utilities display information" \
|
|
str toolsclient
|
|
|
|
define-command -hidden -params 1 lint-open-output-buffer %{
|
|
evaluate-commands -try-client %opt{toolsclient} %{
|
|
edit! -fifo "%arg{1}/fifo" -debug *lint-output*
|
|
set-option buffer filetype make
|
|
set-option buffer make_current_error_line 0
|
|
}
|
|
}
|
|
|
|
define-command \
|
|
-hidden \
|
|
-params 1 \
|
|
-docstring %{
|
|
lint-cleaned-selections <linter>: Check each selection with <linter>.
|
|
|
|
Assumes selections all have anchor before cursor, and that
|
|
%val{selections} and %val{selections_desc} are in the same order.
|
|
} \
|
|
lint-cleaned-selections \
|
|
%{
|
|
# Create a temporary directory to keep all our state.
|
|
evaluate-commands %sh{
|
|
# This is going to come in handy later.
|
|
kakquote() { printf "%s" "$*" | sed "s/'/''/g; 1s/^/'/; \$s/\$/'/"; }
|
|
|
|
# Before we clobber our arguments,
|
|
# let's record the lintcmd we were given.
|
|
lintcmd="$1"
|
|
|
|
# Some linters care about the name or extension
|
|
# of the file being linted, so we'll store the text we want to lint
|
|
# in a file with the same name as the original buffer.
|
|
filename="${kak_buffile##*/}"
|
|
|
|
# A directory to keep all our temporary data.
|
|
dir=$(mktemp -d "${TMPDIR:-/tmp}"/kak-lint.XXXXXXXX)
|
|
|
|
# Write all the selection descriptions to files.
|
|
eval set -- "$kak_selections_desc"
|
|
i=0
|
|
for desc; do
|
|
mkdir -p "$dir"/sel-"$i"
|
|
printf "%s" "$desc" > "$dir"/sel-$i/desc
|
|
i=$(( i + 1 ))
|
|
done
|
|
|
|
# Write all the selection contents to files.
|
|
eval set -- "$kak_quoted_selections"
|
|
i=0
|
|
for text; do
|
|
# The selection text needs to be stored in a subdirectory,
|
|
# so we can be sure the filename won't clash with one of ours.
|
|
mkdir -p "$dir"/sel-"$i"/text/
|
|
printf "%s" "$text" > "$dir"/sel-$i/text/"$filename"
|
|
i=$(( i + 1 ))
|
|
done
|
|
|
|
# We do redirection trickiness to record stderr from
|
|
# this background task and route it back to Kakoune,
|
|
# but shellcheck isn't a fan.
|
|
# shellcheck disable=SC2094
|
|
({ # do the parsing in the background and when ready send to the session
|
|
|
|
for selpath in "$dir"/sel-*; do
|
|
# Read in the line and column offset of this selection.
|
|
IFS=".," read -r start_line start_byte _ < "$selpath"/desc
|
|
|
|
# Run the linter, and record the exit-code.
|
|
eval "$lintcmd '$selpath/text/$filename'" |
|
|
sort -t: -k2,2 -n |
|
|
awk \
|
|
-v line_offset=$(( start_line - 1 )) \
|
|
-v first_line_byte_offset=$(( start_byte - 1 )) \
|
|
'
|
|
BEGIN { OFS=":"; FS=":" }
|
|
|
|
/:[1-9][0-9]*:[1-9][0-9]*:/ {
|
|
$1 = ENVIRON["kak_bufname"]
|
|
if ( $2 == 1 ) {
|
|
$3 += first_line_byte_offset
|
|
}
|
|
$2 += line_offset
|
|
print $0
|
|
}
|
|
' >>"$dir"/result
|
|
done
|
|
|
|
# Load all the linter messages into Kakoune options.
|
|
# Inside this block, shellcheck warns us that the shell doesn't
|
|
# need backslash-continuation chars in a single-quoted string,
|
|
# but awk still needs them.
|
|
# shellcheck disable=SC1004
|
|
awk -v file="$kak_buffile" -v stamp="$kak_timestamp" -v client="$kak_client" '
|
|
function kakquote(text) {
|
|
# \x27 is apostrophe, escaped for shell-quoting reasons.
|
|
gsub(/\x27/, "\x27\x27", text)
|
|
return "\x27" text "\x27"
|
|
}
|
|
|
|
BEGIN {
|
|
OFS=":"
|
|
FS=":"
|
|
error_count = 0
|
|
warning_count = 0
|
|
}
|
|
|
|
/:[1-9][0-9]*:[1-9][0-9]*:/ {
|
|
# Remember that an error or a warning occurs on this line..
|
|
if ($4 ~ /[Ee]rror/) {
|
|
# We definitely have an error on this line.
|
|
flags_by_line[$2] = "{Error}x"
|
|
error_count++
|
|
} else if (flags_by_line[$2] ~ /Error/) {
|
|
# We have a warning on this line,
|
|
# but we already have an error, so do nothing.
|
|
warning_count++
|
|
} else {
|
|
# We have a warning on this line,
|
|
# and no previous error.
|
|
flags_by_line[$2] = "{Information}!"
|
|
warning_count++
|
|
}
|
|
|
|
# The message starts with the severity indicator.
|
|
msg = substr($4, 2)
|
|
|
|
# fix case where $5 is not the last field
|
|
# because of extra colons in the message
|
|
for (i=5; i<=NF; i++) msg = msg ":" $i
|
|
|
|
# Mention the column where this problem occurs,
|
|
# so that information is not lost.
|
|
msg = msg "(col " $3 ")"
|
|
|
|
# Messages will be stored in a line-specs option,
|
|
# and each record in the option uses "|"
|
|
# as a field delimiter, so we need to escape them.
|
|
gsub(/\|/, "\\|", msg)
|
|
|
|
if ($2 in messages_by_line) {
|
|
# We already have a message on this line,
|
|
# so append our new message.
|
|
messages_by_line[$2] = messages_by_line[$2] "\n" msg
|
|
} else {
|
|
# A brand-new message on this line.
|
|
messages_by_line[$2] = msg
|
|
}
|
|
}
|
|
|
|
END {
|
|
printf("set-option %s lint_flags %s", kakquote("buffer=" file), stamp);
|
|
for (line in flags_by_line) {
|
|
flag = flags_by_line[line]
|
|
printf(" %s", kakquote(line "|" flag));
|
|
}
|
|
printf("\n");
|
|
|
|
printf("set-option %s lint_messages %s", kakquote("buffer=" file), stamp);
|
|
for (line in messages_by_line) {
|
|
msg = messages_by_line[line]
|
|
printf(" %s", kakquote(line "|" msg));
|
|
}
|
|
printf("\n");
|
|
|
|
print "set-option " \
|
|
kakquote("buffer=" file) " " \
|
|
"lint_error_count " \
|
|
error_count
|
|
print "set-option " \
|
|
kakquote("buffer=" file) " " \
|
|
"lint_warning_count " \
|
|
warning_count
|
|
}
|
|
' "$dir"/result | kak -p "$kak_session"
|
|
|
|
# Send any linting errors to the debug buffer,
|
|
# for visibility.
|
|
if [ -s "$dir"/stderr ]; then
|
|
# Errors were detected!"
|
|
printf "echo -debug Linter errors: <<<\n"
|
|
while read -r LINE; do
|
|
printf "echo -debug %s\n" "$(kakquote " $LINE")"
|
|
done < "$dir"/stderr
|
|
printf "echo -debug >>>\n"
|
|
# FIXME: When #3254 is fixed, this can become a "fail"
|
|
printf "eval -client %s echo -markup {Error}%s\n" \
|
|
"$kak_client" \
|
|
"lint failed, see *debug* for details"
|
|
else
|
|
# No errors detected, show the results.
|
|
printf "eval -client %s 'lint-show-diagnostics; lint-show-counters'" \
|
|
"$kak_client"
|
|
fi | kak -p "$kak_session"
|
|
|
|
# A fifo to send the results back to a Kakoune buffer.
|
|
mkfifo "$dir"/fifo
|
|
printf 'lint-open-output-buffer %s' "$(kakquote "$dir")" | kak -p "$kak_session"
|
|
|
|
# We are done here. Send the results to Kakoune,
|
|
# and clean up.
|
|
cat "$dir"/result > "$dir"/fifo
|
|
rm -rf "$dir"
|
|
|
|
} & ) >"$dir"/stderr 2>&1 </dev/null
|
|
}
|
|
}
|
|
|
|
define-command \
|
|
-params 0..2 \
|
|
-docstring %{
|
|
lint-selections [<switches>]: Check each selection with a linter.
|
|
|
|
Switches:
|
|
-command <cmd> Use the given linter.
|
|
If not given, the lintcmd option is used.
|
|
|
|
See `:doc lint` for details.
|
|
} \
|
|
lint-selections \
|
|
%{
|
|
evaluate-commands -draft %{
|
|
# Make sure all the selections are "forward" (anchor before cursor)
|
|
execute-keys <a-:>
|
|
|
|
# Make sure the selections are in document order.
|
|
evaluate-commands %sh{
|
|
printf "select "
|
|
printf "%s\n" "$kak_selections_desc" |
|
|
tr ' ' '\n' |
|
|
sort -n -t. |
|
|
tr '\n' ' '
|
|
}
|
|
|
|
evaluate-commands %sh{
|
|
# This is going to come in handy later.
|
|
kakquote() { printf "%s" "$*" | sed "s/'/''/g; 1s/^/'/; \$s/\$/'/"; }
|
|
|
|
if [ "$1" = "-command" ]; then
|
|
if [ -z "$2" ]; then
|
|
echo 'fail -- -command option requires a value'
|
|
exit 1
|
|
fi
|
|
lintcmd="$2"
|
|
elif [ -n "$1" ]; then
|
|
echo "fail -- Unrecognised parameter $(kakquote "$1")"
|
|
exit 1
|
|
elif [ -z "${kak_opt_lintcmd}" ]; then
|
|
echo 'fail The lintcmd option is not set'
|
|
exit 1
|
|
else
|
|
lintcmd="$kak_opt_lintcmd"
|
|
fi
|
|
|
|
printf 'lint-cleaned-selections %s\n' "$(kakquote "$lintcmd")"
|
|
}
|
|
}
|
|
}
|
|
|
|
define-command \
|
|
-docstring %{
|
|
lint-buffer: Check the current buffer with a linter.
|
|
|
|
See `:doc lint` for details.
|
|
} \
|
|
lint-buffer \
|
|
%{
|
|
evaluate-commands %sh{
|
|
if [ -z "${kak_opt_lintcmd}" ]; then
|
|
echo 'fail The lintcmd option is not set'
|
|
exit 1
|
|
fi
|
|
}
|
|
evaluate-commands -draft %{
|
|
execute-keys '%'
|
|
lint-cleaned-selections %opt{lintcmd}
|
|
}
|
|
}
|
|
|
|
alias global lint lint-buffer
|
|
|
|
define-command -hidden lint-show-current-line %{
|
|
update-option buffer lint_messages
|
|
evaluate-commands %sh{
|
|
# This is going to come in handy later.
|
|
kakquote() { printf "%s" "$*" | sed "s/'/''/g; 1s/^/'/; \$s/\$/'/"; }
|
|
|
|
eval set -- "${kak_quoted_opt_lint_messages}"
|
|
shift # skip the timestamp
|
|
|
|
while [ $# -gt 0 ]; do
|
|
lineno=${1%%|*}
|
|
msg=${1#*|}
|
|
|
|
if [ "$lineno" -eq "$kak_cursor_line" ]; then
|
|
printf "info -anchor %d.%d %s\n" \
|
|
"$kak_cursor_line" \
|
|
"$kak_cursor_column" \
|
|
"$(kakquote "$msg")"
|
|
break
|
|
fi
|
|
shift
|
|
done
|
|
}
|
|
}
|
|
|
|
define-command -hidden lint-show-counters %{
|
|
echo -markup "linting results: {Error} %opt{lint_error_count} error(s) {Information} %opt{lint_warning_count} warning(s) "
|
|
}
|
|
|
|
define-command -hidden lint-show-diagnostics %{
|
|
try %{
|
|
# Assume that if the highlighter is set, then hooks also are
|
|
add-highlighter window/lint flag-lines default lint_flags
|
|
hook window -group lint-diagnostics NormalIdle .* %{ lint-show-current-line }
|
|
hook window -group lint-diagnostics WinSetOption lint_flags=.* %{ info; lint-show-current-line }
|
|
}
|
|
}
|
|
|
|
define-command lint-hide-diagnostics -docstring "Hide line markers and disable automatic diagnostic displaying" %{
|
|
remove-highlighter window/lint
|
|
remove-hooks window lint-diagnostics
|
|
}
|
|
|
|
# FIXME: Is there some way we can re-use make-next-error
|
|
# instead of re-implementing it?
|
|
define-command \
|
|
-docstring "Jump to the next line that contains a lint message" \
|
|
lint-next-message \
|
|
%{
|
|
update-option buffer lint_messages
|
|
|
|
evaluate-commands %sh{
|
|
# This is going to come in handy later.
|
|
kakquote() { printf "%s" "$*" | sed "s/'/''/g; 1s/^/'/; \$s/\$/'/"; }
|
|
|
|
eval "set -- ${kak_quoted_opt_lint_messages}"
|
|
shift
|
|
|
|
if [ "$#" -eq 0 ]; then
|
|
printf 'fail no lint messages'
|
|
exit
|
|
fi
|
|
|
|
first_lineno=""
|
|
first_msg=""
|
|
|
|
for lint_message; do
|
|
lineno="${lint_message%%|*}"
|
|
msg="${lint_message#*|}"
|
|
|
|
if [ -z "$first_lineno" ]; then
|
|
first_lineno=$lineno
|
|
first_msg=$msg
|
|
fi
|
|
|
|
if [ "$lineno" -gt "$kak_cursor_line" ]; then
|
|
printf "execute-keys %dg\n" "$lineno"
|
|
printf "info -anchor %d.%d %s\n" \
|
|
"$lineno" "1" "$(kakquote "$msg")"
|
|
exit
|
|
fi
|
|
done
|
|
|
|
# We didn't find any messages after the current line,
|
|
# let's wrap around to the beginning.
|
|
printf "execute-keys %dg\n" "$first_lineno"
|
|
printf "info -anchor %d.%d %s\n" \
|
|
"$first_lineno" "1" "$(kakquote "$first_msg")"
|
|
printf "echo -markup \
|
|
{Information}lint message search wrapped around buffer\n"
|
|
|
|
}
|
|
}
|
|
|
|
# FIXME: Is there some way we can re-use make-previous-error
|
|
# instead of re-implementing it?
|
|
define-command \
|
|
-docstring "Jump to the previous line that contains a lint message" \
|
|
lint-previous-message \
|
|
%{
|
|
update-option buffer lint_messages
|
|
|
|
evaluate-commands %sh{
|
|
# This is going to come in handy later.
|
|
kakquote() { printf "%s" "$*" | sed "s/'/''/g; 1s/^/'/; \$s/\$/'/"; }
|
|
|
|
eval "set -- ${kak_quoted_opt_lint_messages}"
|
|
shift
|
|
|
|
if [ "$#" -eq 0 ]; then
|
|
printf 'fail no lint messages'
|
|
exit
|
|
fi
|
|
|
|
prev_lineno=""
|
|
prev_msg=""
|
|
|
|
for lint_message; do
|
|
lineno="${lint_message%%|*}"
|
|
msg="${lint_message#*|}"
|
|
|
|
# If this message comes on or after the cursor position...
|
|
if [ "$lineno" -ge "${kak_cursor_line}" ]; then
|
|
# ...and we had a previous message...
|
|
if [ -n "$prev_lineno" ]; then
|
|
# ...then go to the previous message and display it.
|
|
printf "execute-keys %dg\n" "$prev_lineno"
|
|
printf "info -anchor %d.%d %s\n" \
|
|
"$lineno" "1" "$(kakquote "$prev_msg")"
|
|
exit
|
|
|
|
# We are after the cursor position, but there has been
|
|
# no previous message; we'll need to do something else.
|
|
else
|
|
break
|
|
fi
|
|
fi
|
|
|
|
# We have not yet reached the cursor position, stash this message
|
|
# and try the next.
|
|
prev_lineno="$lineno"
|
|
prev_msg="$msg"
|
|
done
|
|
|
|
# There is no message before the cursor position,
|
|
# let's wrap around to the end.
|
|
shift $(( $# - 1 ))
|
|
last_lineno="${1%%|*}"
|
|
last_msg="${1#*|}"
|
|
|
|
printf "execute-keys %dg\n" "$last_lineno"
|
|
printf "info -anchor %d.%d %s\n" \
|
|
"$last_lineno" "1" "$(kakquote "$last_msg")"
|
|
printf "echo -markup \
|
|
{Information}lint message search wrapped around buffer\n"
|
|
}
|
|
}
|