As Joel noticed recently, MessageManager in firefox doesn't guarantee
message delivery if the opposite end hasn't been initialized yet. In
this case, message will be silently dropped on the ground.
To fix this, we establish a handshake in SimpleChannel to make sure that
both ends are initialized, end buffer outgoing messages until this
happens.
Drive-by: serialize dialog events to only deliver *after* the
`Page.ready` protocol event. Otherwise, we deliver dialog events to the
unreported page.
This should fix current build failure on Mac.
5e1333ea77 is necessary to fix the following compilation error:
CMake Error at Source/cmake/WebKitFeatures.cmake:21 (message):
ENABLE_LEGACY_CSS_VENDOR_PREFIXES is not a valid WebKit option
Call Stack (most recent call first):
Source/cmake/WebKitFeatures.cmake:40 (_ENSURE_IS_WEBKIT_OPTION)
Source/cmake/OptionsWPE.cmake:89 (WEBKIT_OPTION_DEFAULT_PORT_VALUE)
Source/cmake/WebKitCommon.cmake:58 (include)
CMakeLists.txt:173 (include)
We try to avoid closing firefox too early, fearing that this
might terminate clean shutdown sequence.
Usually we assume that `Browser.enable` is called before `Browser.close`
- however, this is not the case in certain tests. So we have to
ensure browser initialization in `Browser.close` as well.
In my local tests, this fixes the Firefox Pipe problem: it looks like
we were closing browser too quickly.
It looks like terminating browser when search service or addon manager is
not fully initialized results in a broken shutdown sequence. As of
today, this results in multiple errors in the browser STDERR. In future,
this might also result in browser stalling instead of terminating.
This starts awaiting search and addon manager termination.
References #3995
Using WebProgressListener events works in all cases. Currently
used `pageshow` event will stop being emitted in future when loading
was stopped with `window.stop()` api.
References #3995
This patch:
- moves `SimpleChannel` to synchronously dispatch buffered commands
instead of a `await Promise.resolve()` hack
- moves dialog & screencast handling from `PageHandler` to
`TargetManager`. This leaves `PageHandler` to be concerned solely about
protocol.
- removes `attach` and `detach` methods for worker channels: since
channels are buffering messages until the namespace registers, there's
no chance to loose any events.
- slightly simplifies `PageNetwork` class: it's lifetime is now
identical to the lifetime of the associated `PageTarget`, so a lot can
be simplified later on.
References #3995
In the current tip-of-tree Firefox, document channel is enabled by
default, so we have to enable it in order to roll further.
This patch:
1. Removes content disposition sniffing from content process since it
crashes renderer with document channel.
2. Merges all page-related handlers in a single `PageHandler` and
serializes network events wrt the `Page.frameAttached` event.
The serialization mentioned in (2) is necessary: frame attachment is
reported from the content process, and network events are reported from
the browsers process. This is an inherent race, that becomes exposed by
the document channel.
On a side note, (2) makes it possible to synchronously report all
buffered events in `SimpleChannel` (cc offline discussion with @dgozman
that highlighted an unsighty approach that we currently employ there: reporting
events in a subsequent microtask.)
References #3995
This patch:
1. Changes `SimpleChannel` to buffer messages to the namespace that
hasn't been registered yet. This allows us to create `SimpleChannel`
per target on the browser side right away.
2. Removes multisession support. Now there's only one `PageAgent` in the
content process, which talks to a single `PageHandler` on the browser
side. Both ends can be created as-soon-as-needed; thanks to
`SimpleChannel` bufferring, no messages will be lost and all messages
will be delivered in proper order. (This is currently the reason why
build 1178 flakes on windows).
3. Straightens up the target reporting. Targets are reported as soon
as they appear on the browser side.
**NOTE:** this doesn't yet remove sessions from protocol.
References #3995
We currently might double-attach to the target in `BrowserHandler` since we iterate over all targets, and then subscribe to the additional event when target is getting initialized.
This patch fixes this race condition and should unblock the roll to r1177.
References #3995
As of today, we create `PageTarget` instances whenever we get a
sync IPC from the content process. This, however, breaks an invariant
that `browserContext.pages` always has all pages (and *browsing contexts* - not to be confused with *browser contexts*), associated with browser context. This invariant will be especially important when we move
user agent emulation to browser-side.
This patch makes `PageTarget` lifecycle symmetrical:
- `PageTarget` instance is created when tab is opened
- `PageTarget` is destroyed when tab is crashed or closed
This should also fix a bunch of race conditions with persistent mode, since sometimes we arrive to the window after its
initialization.
Drive-by: straighten viewport management and put a nice descriptive comment.
Juggler code had a bug where we subscribed to window and tab
events, but did not iterate collections of current windows and tabs.
As a result, we were sometimes failing to set viewport size for the
initial window, and implemented an artificial promise to workaround
the problem.
This patch:
- starts calling `onOpenWindow` and `onOpenTabListener` callbacks
for *all* windows and tabs - current and future, eliminating the
race condition.
This worked too well and we started overriding window sizes that
were set by users with `window.open(url, 'width=300;height=400')` (we
have a test for this). To fix this, we now plumb `CHROME_WITH_SIZE`
flag from appWindow and override viewport iff this flag is not set.
After this patch, we will use the `onTabOpened` event to move user
agent emulation to the browser-side.
References #3995
BrowsingContextIDs are consistent across the processes, so we can use
them to target frames in both browser and content processes. This will
aid browser-side navigation.
As a nice side-effect, we can drop a round-trip to the content process
for every `requestWillBeSent` event since we *almost* always can
attribute all network events to the proper parent frames.
I say "almost", because we in fact **fail** to correctly attribute requests
from workers that are instantiated by subframes. This, however, is
not working in Chromium ATM, so I consider this to be a minor regression
that is worth the simplification.
This patch:
- moves PrintDepsWindows folder to `//browser_patches/winldd`
- adds `build.sh`, `archive.sh`, `clean.sh` and `BUILD_NUMBER` to
power builds on buildbots
- starts building `winldd-win64` on windows buildbot
This patch:
- removes `--enable-gpl` and `--enable-version3` flags. This defaults
builds to LGPL2 license
- includes `--disable-autodetect` to ensure determenism
- includes extra version suffix to link from binary files back to these
build scripts
This patch moves FFMPEG building to buildbots:
- `ffmpeg-mac.zip` is built on Mac 10.14 machine
- `ffmpeg-win32.zip` and `ffmpeg-win64.zip` are cross-compiled on
Ubuntu 20.04 machine
All builds across the platforms share the same config:
- the same versions of `ffmpeg` and `libvpx`
- the same build configuration for both `ffmpeg` and `libvpx`
The config could be found in the `//browser_patches/ffmpeg/CONFIG.sh`.
The builds will be then copied manually and committed to the git
repository.
browser(firefox): fix automatic http->https redirect
Sometimes, Firefox does an automatic http->https redirect without hitting
the network (e.g. for http://wikipedia.org). In this case, the http request
is very strange:
- it does not actually hit the network;
- it is never intercepted;
- we cannot access its response because there was no actual response.
So, we had a bug where:
- redirects inherited the original request's listener;
- that listener was throwing an error.
This lead to the error in the listeners onDataAvailable call chain,
and original listener that renders the response was never called,
resulting in an empty page.
This change:
- ignores the original request that did not hit the network;
- does not inherit the listener;
- adds try/catch around problematic calls.
If there's no platform specified for the chromium build, we should
detect the host platform.
This will make it pleasant to verify Chromium rolls locally.
Assuming there's a `CR` env variable pointing to the local chromium,
rolling would look like this:
- bump a revision in `//browser_patches/chromium/BUILD_NUMBER`
- run `//browser_patches/chromium/build.sh`
- run tests with pulled chromium: `CRPATH=$CR npm run ctest`
This is an alternative approach to #3698 that was setting up a custom
mapping between chromium revisions and our mirrored builds. For example, we were
taking chromium `792639` and re-packaging it to our CDN as Chromium 1000.
One big downside of this opaque mapping was inability to quickly
understand which Chromium is mirrored to CDN.
To solve this, this patch starts treating browser revision as a fractional number,
with and integer part being a chromium revision, and fractional
part being our build number. For example, we can generate builds `792639`, `792639.1`,
`792639.2` etc, all of which will pick Chromium `792639` and re-package it to our CDN.
In the Playwright code itself, there are a handful of places that treat
browser revision as integer, exclusively to compare revision with some particular
revision numbers. This code would still work as-is, but I changed these places
to use `parseFloat` instead of `parseInt` for correctness.
Currently, we mirror Chromium revisions from gbuckets to our cdn and
name them same way as Chromium revision.
However, with the upcoming bundling of FFMPEG, we'd like to revision
Chromium packages separately, since our Chromium package will depend from
a number of factors:
- chromium upstream revision
- ffmpeg version
- extra files to add to the package or remove from the package
We should be able to produce a new Chromium build once any of these changes.
With this patch, to roll Chromium browser:
- update chromium revision number in the
`//browser_patches/chromium/UPSTREAM_CONFIG.sh`
- bump the build number in the `//browser_patches/chromium/BUILD_NUMBER`
Reference #3680
Firefox will sometimes send multiple requests with the same http channel id. When a frame is loaded, the favicon is requested in the parent frame, but with the same channel id. This can cause the document request to report the wrong frame, causing the test 'should capture iframe navigation request' to fail. It fails consistently on my computer.
This patch adds the content policy type into the http channelId to better distinguish requests. Maybe there is something better we can do? It looks like we use channelId has request ids, so there might be more bugs with these favicon requests in playwright?
* This changes the archive.sh script to use the webkit generate-bundle
tool to generate the MiniBrowser bundles instead of using our custom
logic.
* pw_run.sh is simplified because the new bundles include a wrapper
script that sets the needed LD_LIBRARY_PATH environment variables.
pw_run.sh now calls this wrapper script (for GTK or WPE) instead of
calling the MiniBrowser binary directly when running from a bundle.
Co-authored-by: Andrey Lushnikov <aslushnikov@gmail.com>
Otherwise if required version is not installed the build fails with a cryptic message like
`error: toolchain '1.45.0-x86_64-unknown-linux-gnu' does not support components`
Relates #3258
After a chat with @aslushnikov we add this in two iterations. The first one (this PR) is about scheduled runs for testing the latest tip-of-tree version of the browsers daily and the next PR is about opening an automated PRs once its passing (not sure if its worth to add for failing too) or sending Telegram/Slack notifications.
Current status is that Firefox (around 2 hours) and WebKit (around 3-4 hours) works.
Known issues which I fix before we merge:
- ~~Changes in `test/base.fixture.ts` will get extracted in #3453~~
Feel free to review, current blockers are before we can merge:
- ~~#3453~~
- potential git clone optimisation by aslushnikov
`MediaFeatureValuesChanged` is what their devtools code uses to update the styles. I tried using their code directly, but it doesn't play nicely with navigations so I decided to stick with ours.
Firefox buildchain does not fixate `rust` and `cbindgen` versions,
so we want to fixate them on our end.
A table with matching rust version for every firefox version can
be found at [Rust Update Policy for Firefox](https://wiki.mozilla.org/Rust_Update_Policy_for_Firefox).
Additionally, there are checks in `mozbuild` for the minimum
rust version and minimum `cbindgen` version.
This establishes a single naming for all our blobs with browser
builds that we upload to CDN: `<browser-name>-<os-version>`
- `<browser-name>` is either `firefox` or `webkit`.
- `os-version` is the OS that was used to produce the build.
References #2745
Originally there was no way to build both webkit-gtk and webkit-wpe
in the same checkout. As a result, we were:
- building webkit-gtk & uploading it to CDN
- building webkit-wpe & uploading it to CDN
- downloading webkit-gtk & webkit-wpe from CDN and compiling a single
webkit-gtk-wpe folder that we uploaded to CDN
As of today, however, we can build WPE and GTK ports together. This
patch starts using this to drastically simplify build process:
- build webkit-gtk and webkit-wpe
- use `archive.sh` script that compiles a single folder with both ports
- upload archive to the cloud
This should also fix currently failing webkit build that fails to
assemble the `webkit-gtk-wpe` folder (I missed these codepaths while preparing
for Ubuntu-20.04 bot).
References #2745
This patch:
- specializes "linux" scripts into "Ubuntu 18.04" scripts
- renames all future linux blobs on CDN:
* `firefox-linux.zip => firefox-ubuntu-18.04.zip`
* `minibrowser-gtk.zip => minibrowser-gtk-ubuntu-18.04.zip`
* `minibrowser-wpe.zip => minibrowser-wpe-ubuntu-18.04.zip`
* `minibrowser-gtk-wpe.zip => minibrowser-gtk-wpe-ubuntu-18.04.zip`
- updates downloader to deal with the new names
References #2745
This patch changes the build system to use the JHBuild minimal dependency
system introduced in WebKit r264092 <https://trac.webkit.org/r264092>
The build has been tested with Ubuntu-18.04
The binary size of the zip bundles is now: 37M (WPE) and 40M (GTK).
Previously it was 54M and 59M (respectively)