# disko - Declarative disk partitioning

<!-- Generated with bing image generator (which uses dall-e-2): edge-gpt-image --prompt "Disco ball shooting a laser beam at one hard drive" -->

<img title="" src="./docs/logo.jpeg" alt="Project logo" width="274">

[Documentation Index](./docs/INDEX.md)

NixOS is a Linux distribution where everything is described as code, with one exception: during installation, the disk partitioning and formatting are manual steps. **disko** aims to correct this sad 🤡 omission.

This is especially useful for unattended installations, re-installation after a system crash or for setting up more than one identical server.

## Overview

**disko** can either be used after booting from a Nixos installer, or in conjunction with [nixos-anywhere](https://github.com/numtide/nixos-anywhere) if you're installing remotely.

Before using **disko**, the specifications of the disks, partitions, type of formatting and the mount points must be defined in a Nix configuration. You can find [examples](./example) of typical configurations in the Nix community repository, and use one of these as the basis of your own configuration.

You can keep your configuration and re-use it for other installations, or for a system rebuild.

**disko** is flexible, in that it supports most of the common formatting and partitioning options, including:

- Disk layouts: GPT, MBR, and mixed.
- Partition tools: LVM, mdadm, LUKS, and more.
- Filesystems: ext4, btrfs, ZFS, bcachefs, tmpfs, and others.

It can work with these in various configurations and orders, and supports recursive layouts.

## How to use disko

Disko doesn't require installation: it can be run directly from nix-community repository. The [Quickstart Guide](./docs/quickstart.md) documents how to run Disko in its simplest form when installing NixOS.

For information on other use cases, including upgrading from an older version of **disko**, using **disko** without NixOS and downloading the module, see the [How To Guide](./docs/quickstart.md)

For more detailed options, such as command line switches, see the [Reference Guide](./docs/reference.md)

To access sample configurations for commonly-used disk layouts, refer to the [examples](./examples) provided.

## Sample Configuration and CLI command

A simple disko configuration may look like this:

```
{ disks ? [ "/dev/vdb" ], ... }: {  
 disk = {  
  vdb = {  
   device = builtins.elemAt disks 0;  
   type = "disk";  
   content = {  
    type = "table";  
    format = "gpt";  
    partitions = [  
     {  
      type = "partition";  
      name = "ESP";  
      start = "1MiB";  
      end = "100MiB";  
      bootable = true;  
      content = {  
       type = "filesystem";  
       format = "vfat";  
       mountpoint = "/boot";  
      };  
     }  
     {  
      name = "root";  
      type = "partition";  
      start = "100MiB";  
      end = "100%";  
      part-type = "primary";  
      bootable = true;  
      content = {  
       type = "filesystem";  
       format = "ext4";  
       mountpoint = "/";  
      };  
     }  
    ];  
   };  
  };  
 };  
}
```

If you'd saved this configuration in /tmp/disko-config.nix , and wanted to create a disk named /dev/nvme0n1, you would run the following command to partition, format and mount the disk.

$ sudo nix run github:nix-community/disko -- --mode zap_create_mount /tmp/disko-config.nix --arg disks '[ "/dev/nvme0n1" ]'

## Related Tools

This tool is used by [nixos-anywhere](https://github.com/numtide/nixos-anywhere), which carries out a fully-automated remote install of NixOS.

We also acknowledge https://github.com/NixOS/nixpart, the conceptual ancestor of this project.

## Licensing and Contribution details

This software is provided free under the [MIT Licence](https://opensource.org/licenses/MIT).

If you would like to become a contributor, please see our [contribution guidelines.](https://github.com/numtide/docs/contribution-guidelines.md)

---

This project is supported by [Numtide](https://numtide.com/).  ![Untitledpng](https://codahosted.io/docs/6FCIMTRM0p/blobs/bl-sgSunaXYWX/077f3f9d7d76d6a228a937afa0658292584dedb5b852a8ca370b6c61dabb7872b7f617e603f1793928dc5410c74b3e77af21a89e435fa71a681a868d21fd1f599dd10a647dd855e14043979f1df7956f67c3260c0442e24b34662307204b83ea34de929d)    

We are a team of independent freelancers that love open source.  We help our customers make their project lifecycles more efficient by:

- Providing and supporting useful tools such as this one
- Building and deploying infrastructure, and offering dedicated DevOps support
- Building their in-house Nix skills, and integrating Nix with their workflows
- Developing additional features and tools
- Carrying out custom research and development.

[Contact us](https://numtide.com/contact) if you have a project in mind, or if you need help with any of our supported tools, including this one. We'd love to hear from you.