@@ -0,0 +1,444 @@
1+# -*- coding: utf-8; mode: conf -*-
2+# lint Python modules using external checkers.
4+# This is the main checker controlling the other ones and the reports
5+# generation. It is itself both a raw checker and an astng checker in order
7+# * handle message activation / deactivation at the module level
8+# * handle some basic but necessary stats'data (number of classes, methods...)
12+# A comma-separated list of package or module names from where C extensions may
13+# be loaded. Extensions are loading into the active Python interpreter and may
15+extension-pkg-whitelist=
17+# Add files or directories to the blacklist. They should be base names, not
19+ignore=CVS, .git, .svn
21+# Add files or directories matching the regex patterns to the blacklist. The
22+# regex matches against base names, not paths.
25+# Python code to execute, usually for sys.path manipulation such as
29+# Use multiple processes to speed up Pylint.
32+# List of plugins (as comma separated values of python modules names) to load,
33+# usually to register additional checkers.
36+# Pickle collected data for later comparisons.
39+# Specify a configuration file.
42+# Allow loading of arbitrary C extensions. Extensions are imported into the
43+# active Python interpreter and may run arbitrary code.
44+unsafe-load-any-extension=no
49+# Only show warnings with the listed confidence levels. Leave empty to show
50+# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
53+# Disable the message, report, category or checker with the given id(s). You
54+# can either give multiple identifiers separated by comma (,) or put this
55+# option multiple times (only on the command line, not in the configuration
56+# file where it should appear only once).You can also use "--disable=all" to
57+# disable everything first and then reenable specific checks. For example, if
58+# you want to run only the similarities checker, you can use "--disable=all
59+# --enable=similarities". If you want to run only the classes checker, but have
60+# no Warning level messages displayed, use"--disable=all --enable=classes
62+disable=bad-whitespace, duplicate-code
64+# Enable the message, report, category or checker with the given id(s). You can
65+# either give multiple identifier separated by comma (,) or put this option
66+# multiple time (only on the command line, not in the configuration file where
67+# it should appear only once). See also the "--disable" option for examples.
73+# Python expression which should return a note less than 10 (10 is the highest
74+# note). You have access to the variables errors warning, statement which
75+# respectively contain the number of errors / warnings messages and the total
76+# number of statements analyzed. This is used by the global evaluation report
78+evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
80+# Template used to display messages. This is a python new-style format string
81+# used to format the message information. See doc for all details
83+# HINT: do not set this here, use argument --msg-template=...
84+#msg-template={path}:{line}: [{msg_id}({symbol}),{obj}] {msg}
86+# Set the output format. Available formats are text, parseable, colorized, json
87+# and msvs (visual studio).You can also give a reporter class, eg
88+# mypackage.mymodule.MyReporterClass.
90+# HINT: do not set this here, use argument --output-format=...
93+# Tells whether to display a full report or only the messages
96+# Activate the evaluation score.
102+# Maximum number of nested blocks for function / method body
108+# List of builtins function names that should not be used, separated by a comma
109+bad-functions=map,filter,apply,input
111+# Naming hint for argument names
112+argument-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
114+# Regular expression matching correct argument names
115+argument-rgx=(([a-z][a-zA-Z0-9_]{2,30})|(_[a-z0-9_]*))$
117+# Naming hint for attribute names
118+attr-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
120+# Regular expression matching correct attribute names
121+attr-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*)|([A-Z0-9_]*))$
123+# Bad variable names which should always be refused, separated by a comma
124+bad-names=foo,bar,baz,toto,tutu,tata
126+# Naming hint for class attribute names
127+class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
129+# Regular expression matching correct class attribute names
130+class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
132+# Naming hint for class names
133+class-name-hint=[A-Z_][a-zA-Z0-9]+$
135+# Regular expression matching correct class names
136+class-rgx=[A-Z_][a-zA-Z0-9]+$
138+# Naming hint for constant names
139+const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$
141+# Regular expression matching correct constant names
142+const-rgx=(([a-zA-Z_][a-zA-Z0-9_]*)|(__.*__))$
143+#const-rgx=[f]?[A-Z_][a-zA-Z0-9_]{2,30}$
145+# Minimum line length for functions/classes that require docstrings, shorter
147+docstring-min-length=-1
149+# Naming hint for function names
150+function-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
152+# Regular expression matching correct function names
153+function-rgx=(([a-z][a-zA-Z0-9_]{2,30})|(_[a-z0-9_]*))$
155+# Good variable names which should always be accepted, separated by a comma
156+good-names=i,j,k,ex,Run,_,log,cfg,id
158+# Include a hint for the correct naming format with invalid-name
159+include-naming-hint=no
161+# Naming hint for inline iteration names
162+inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$
164+# Regular expression matching correct inline iteration names
165+inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$
167+# Naming hint for method names
168+method-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
170+# Regular expression matching correct method names
171+method-rgx=(([a-z][a-zA-Z0-9_]{2,30})|(_[a-z0-9_]*))$
173+# Naming hint for module names
174+module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
176+# Regular expression matching correct module names
177+#module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
178+module-rgx=([a-z_][a-z0-9_]*)$
180+# Colon-delimited sets of names that determine each other's naming style when
181+# the name regexes allow several styles.
184+# Regular expression which should only match function or class names that do
185+# not require a docstring.
188+# List of decorators that produce properties, such as abc.abstractproperty. Add
189+# to this list to register other decorators that produce valid properties.
190+property-classes=abc.abstractproperty
192+# Naming hint for variable names
193+variable-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
195+# Regular expression matching correct variable names
196+variable-rgx=(([a-z][a-zA-Z0-9_]{2,30})|(_[a-z0-9_]*)|([a-z]))$
201+# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
202+expected-line-ending-format=
204+# Regexp for a line that is allowed to be longer than the limit.
205+ignore-long-lines=^\s*(# )?<?https?://\S+>?$
207+# Number of spaces of indent required inside a hanging or continued line.
210+# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
214+# Maximum number of characters on a single line.
217+# Maximum number of lines in a module
218+max-module-lines=2000
220+# List of optional constructs for which whitespace checking is disabled. `dict-
221+# separator` is used to allow tabulation in dicts, etc.: {1 : 1,\n222: 2}.
222+# `trailing-comma` allows a space between comma and closing bracket: (a, ).
223+# `empty-line` allows space-only lines.
224+no-space-check=trailing-comma,dict-separator
226+# Allow the body of a class to be on the same line as the declaration if body
227+# contains single statement.No config file found, using default configuration
229+single-line-class-stmt=no
231+# Allow the body of an if to be on the same line as the test if there is no
233+single-line-if-stmt=no
238+# Logging modules to check that the string format arguments are in logging
239+# function parameter format
240+logging-modules=logging
245+# List of note tags to take in consideration, separated by a comma.
251+# Ignore comments when computing similarities.
254+# Ignore docstrings when computing similarities.
255+ignore-docstrings=yes
257+# Ignore imports when computing similarities.
260+# Minimum lines number of a similarity.
261+min-similarity-lines=4
266+# Spelling dictionary name. Available dictionaries: none. To make it working
267+# install python-enchant package.
270+# List of comma separated words that should not be checked.
271+spelling-ignore-words=
273+# A path to a file that contains private dictionary; one word per line.
274+spelling-private-dict-file=
276+# Tells whether to store unknown words to indicated private dictionary in
277+# --spelling-private-dict-file option instead of raising a message.
278+spelling-store-unknown-words=no
283+# List of decorators that produce context managers, such as
284+# contextlib.contextmanager. Add to this list to register other decorators that
285+# produce valid context managers.
286+contextmanager-decorators=contextlib.contextmanager
288+# List of members which are set dynamically and missed by pylint inference
289+# system, and so shouldn't trigger E1101 when accessed. Python regular
290+# expressions are accepted.
293+# Tells whether missing members accessed in mixin class should be ignored. A
294+# mixin class is detected if its name ends with "mixin" (case insensitive).
295+ignore-mixin-members=yes
297+# This flag controls whether pylint should warn about no-member and similar
298+# checks whenever an opaque object is returned when inferring. The inference
299+# can return multiple potential results while evaluating a Python object, but
300+# some branches might not be evaluated, which results in partial inference. In
301+# that case, it might be useful to still emit no-member and other checks for
302+# the rest of the inferred objects.
303+ignore-on-opaque-inference=yes
305+# List of class names for which member attributes should not be checked (useful
306+# for classes with dynamically set attributes). This supports the use of
308+ignored-classes=optparse.Values,thread._local,_thread._local
310+# List of module names for which member attributes should not be checked
311+# (useful for modules/projects where namespaces are manipulated during runtime
312+# and thus existing member attributes cannot be deduced by static analysis. It
313+# supports qualified module names, as well as Unix pattern matching.
316+# Show a hint with possible names when a member name was not found. The aspect
317+# of finding the hint is based on edit distance.
318+missing-member-hint=yes
320+# The minimum edit distance a name should have in order to be considered a
321+# similar match for a missing member name.
322+missing-member-hint-distance=1
324+# The total number of similar names that should be taken in consideration when
325+# showing a hint for a missing member.
326+missing-member-max-choices=1
331+# List of additional names supposed to be defined in builtins. Remember that
332+# you should avoid to define new builtins when possible.
335+# Tells whether unused global variables should be treated as a violation.
336+allow-global-unused-variables=yes
338+# List of strings which can identify a callback function by name. A callback
339+# name must start or end with one of those strings.
342+# A regular expression matching the name of dummy variables (i.e. expectedly
344+dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
346+# Argument names that match this expression will be ignored. Default to name
347+# with leading underscore
348+ignored-argument-names=_.*|^ignored_|^unused_
350+# Tells whether we should check for unused import in __init__ files.
353+# List of qualified module names which can have objects that can redefine
355+redefining-builtins-modules=six.moves,future.builtins
360+# List of method names used to declare (i.e. assign) instance attributes.
361+defining-attr-methods=__init__,__new__,setUp
363+# List of member names, which should be excluded from the protected access
365+exclude-protected=_asdict,_fields,_replace,_source,_make
367+# List of valid names for the first argument in a class method.
368+valid-classmethod-first-arg=cls
370+# List of valid names for the first argument in a metaclass class method.
371+valid-metaclass-classmethod-first-arg=mcs
376+# Maximum number of arguments for function / method
379+# Maximum number of attributes for a class (see R0902).
382+# Maximum number of boolean expressions in a if statement
385+# Maximum number of branch for function / method body
388+# Maximum number of locals for function / method body
391+# Maximum number of parents for a class (see R0901).
394+# Maximum number of public methods for a class (see R0904).
395+max-public-methods=20
397+# Maximum number of return / yield for function / method body
400+# Maximum number of statements in function / method body
403+# Minimum number of public methods for a class (see R0903).
409+# Allow wildcard imports from modules that define __all__.
410+allow-wildcard-with-all=no
412+# Analyse import fallback blocks. This can be used to support both Python 2 and
413+# 3 compatible code, which means that the block might have code that exists
414+# only in one or another interpreter, leading to false positives when analysed.
415+analyse-fallback-blocks=no
417+# Deprecated modules which should not be used, separated by a comma
418+deprecated-modules=optparse,tkinter.tix
420+# Create a graph of external dependencies in the given file (report RP0402 must
424+# Create a graph of every (i.e. internal and external) dependencies in the
425+# given file (report RP0402 must not be disabled)
428+# Create a graph of internal dependencies in the given file (report RP0402 must
432+# Force import order to recognize a module as part of the standard
433+# compatibility libraries.
434+known-standard-library=
436+# Force import order to recognize a module as part of a third party library.
437+known-third-party=enchant
442+# Exceptions that will emit a warning when being caught. Defaults to
444+overgeneral-exceptions=Exception