1. In the Arduino IDE Boards Manager, install support for the ESP32. You can find instructions here: https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/boards_manager.md
3. Check out the examples under ```Examples``` -> ```Watchy```
4. Compile & Upload with these board settings:
* Board: "ESP32 Wrover Module"
* All Other Settings: leave to default
* You may have to install the [CP2104 USB to Serial drivers](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers) if the port is not automatically detected
