@@ -31,57 +31,39 @@ module Streamly.Internal.Data.MutArray.Type
3131 -- ** Type
3232 -- $arrayNotes
3333 MutArray (..)
34−
35− -- ** Conversion
36− -- *** Pinned and Unpinned
34+ , MutByteArray
35+ , MutableByteArray
3736 , pin
3837 , unpin
3938 , isPinned
4039
41− -- ** Casting
42− , cast
43− , castUnsafe -- XXX unsafeCast
44− , asBytes
45− , unsafePinnedAsPtr
46− , unsafeAsPtr
47−
40+ -- -- * Constructing and Writing
4841 -- ** Construction
49− , empty
50−
51− -- *** New
52− -- | New arrays are always empty arrays with some reserve capacity to
53− -- extend the length without reallocating.
54− , emptyOf
55− , newArrayWith -- emptyAlignedWith
56− , pinnedEmptyOf
57− , pinnedNewAligned -- XXX not required
58− -- , new -- uninitialized array of specified length
59−
60− -- *** Cloning
61− , clone
62− , pinnedClone
42+ , nil
6343
64− -- *** Slicing
65− -- | Get a subarray without copying
66− , getSliceUnsafe -- XXX unsafeGetSlice
67− , getSlice
68− , splitAt -- XXX should be able to express using getSlice
69− , breakOn
44+ -- *** Uninitialized Arrays
45+ , pinnedNew
46+ , pinnedNewBytes
47+ , pinnedNewAligned
48+ , new
49+ , newArrayWith
7050
71− -- *** Stream Folds
51+ -- *** From streams
7252 , ArrayUnsafe (..)
73− , unsafeCreateOfWith
74− , unsafeCreateOf
75− , unsafePinnedCreateOf
76− , pinnedCreateOf
77− , createOfWith
78− , createOf
79− , revCreateOf
80−
81− , pinnedCreate
82− , createWith
83− , create
84− -- , revCreate
53+ , writeNWithUnsafe
54+ , writeNWith
55+ , writeNUnsafe
56+ , pinnedWriteNUnsafe
57+ , writeN
58+ , pinnedWriteN
59+ , pinnedWriteNAligned
60+
61+ , writeWith
62+ , write
63+ , pinnedWrite
64+
65+ , writeRevN
66+ -- , writeRev
8567
8668 -- *** From containers
8769 , fromListN
@@ -97,11 +79,11 @@ module Streamly.Internal.Data.MutArray.Type
9779 , fromByteStr#
9880 , fromPtrN
9981 , fromChunksK
100− , fromChunksRealloced -- fromSmallChunks
82+ , fromChunksRealloced
10183
10284 -- ** Random writes
10385 , putIndex
104− , putIndexUnsafe -- XXX unsafePutIndex
86+ , putIndexUnsafe
10587 , putIndices
10688 -- , putFromThenTo
10789 -- , putFrom -- start writing at the given position
@@ -109,69 +91,76 @@ module Streamly.Internal.Data.MutArray.Type
10991 -- , putFromTo
11092 -- , putFromRev
11193 -- , putUptoRev
112− , modifyIndexUnsafe -- XXX unsafeModifyIndex
94+ , modifyIndexUnsafe
11395 , modifyIndex
11496 , modifyIndices
11597 , modify
11698 , swapIndices
11799 , unsafeSwapIndices
118100
119− -- ** Reading
101+ -- ** Growing and Shrinking
102+ -- | Arrays grow only at the end, though it is possible to grow on both sides
103+ -- and therefore have a cons as well as snoc. But that will require two
104+ -- bounds in the array representation.
120105
121− -- *** Indexing
122− , getIndex
123− , getIndexUnsafe -- XXX unsafeGetIndex
124− -- , getFromThenTo
125− , getIndexRev -- getRevIndex?
126− , indexReader
127− , indexReaderWith
106+ -- *** Appending elements
107+ , snocWith
108+ , snoc
109+ , snocLinear
110+ , snocMay
111+ , snocUnsafe
128112
129− -- *** To Streams
113+ -- *** Appending streams
114+ , writeAppendNUnsafe
115+ , writeAppendN
116+ , writeAppendWith
117+ , writeAppend
118+
119+ -- ** Eliminating and Reading
120+
121+ -- *** To streams
122+ , reader
123+ , readerRevWith
124+ , readerRev
125+
126+ -- *** To containers
127+ , toStreamDWith
128+ , toStreamDRevWith
129+ , toStreamKWith
130+ , toStreamKRevWith
130131 , read
131132 , readRev
132− , toStreamWith
133− , toStreamRevWith
134133 , toStreamK
135− , toStreamKWith
136134 , toStreamKRev
137− , toStreamKRevWith
138−
139− -- *** To Containers
140135 , toList
141136
142− -- *** Unfolds
143137 -- experimental
144138 , producerWith
145139 , producer
146140
147− , reader
148− , readerRevWith
149− , readerRev
150−
151− -- ** Size and Capacity
152− -- *** Size
153− , length
154− , byteLength
155−
156− -- *** Capacity
157− -- , capacity
158− , byteCapacity
159− , bytesFree
141+ -- *** Random reads
142+ , getIndex
143+ , getIndexUnsafe
144+ , getIndices
145+ , getIndicesWith
146+ -- , getFromThenTo
147+ , getIndexRev
160148
161− -- *** Capacity Management
149+ -- ** Memory Management
162150 , blockSize
163151 , arrayChunkBytes
164152 , allocBytesToElemCount
165− , realloc -- this is "resize"
166− , grow
167− , growExp
153+ , realloc
154+ , resize
155+ , resizeExp
168156 , rightSize
169157
170− -- ** Folding
171− , foldl'
172− , foldr
173− , byteCmp
174− , byteEq
158+ -- ** Size
159+ , length
160+ , byteLength
161+ -- , capacity
162+ , byteCapacity
163+ , bytesFree
175164
176165 -- ** In-place Mutation Algorithms
177166 , strip
@@ -183,82 +172,59 @@ module Streamly.Internal.Data.MutArray.Type
183172 , mergeBy
184173 , bubble
185174
186− -- ** Growing and Shrinking
187− -- | Arrays grow only at the end, though it is possible to grow on both
188− -- sides and therefore have a cons as well as snoc. But that will require
189− -- both lower and upper bound in the array representation.
190−
191− -- *** Appending elements
192− , snocWith
193− , snoc
194− , snocLinear
195− , snocMay
196− , snocUnsafe -- XXX unsafeSnoc
197−
198− -- *** Appending streams
199− , unsafeAppendN
200− , appendN
201− , appendWith
202− , append
203−
204− -- *** Appending arrays
205− , spliceCopy
206− , spliceWith
207− , splice
208− , spliceExp
209− , spliceUnsafe -- XXX unsafeSplice
210− -- , putSlice
211− -- , appendSlice
212− -- , appendSliceFrom
213−
214− -- ** Serialization using Unbox
215− , pokeAppend
216− , pokeAppendMay
217− , pokeSkipUnsafe -- unsafePokeSkip
175+ -- ** Casting
176+ , cast
177+ , castUnsafe
178+ , asBytes
179+ , asPtrUnsafe
180+ , asUnpinnedPtrUnsafe
218181
219− -- ** Deserialization using Unbox
220− , peekUncons
221− , peekUnconsUnsafe -- unsafePeekUncons
222− , peekSkipUnsafe -- unsafePeekSkip
182+ -- ** Folding
183+ , foldl'
184+ , foldr
185+ , cmp
186+ , byteCmp
187+ , byteEq
223188
224− -- Arrays of arrays
189+ -- ** Arrays of arrays
225190 -- We can add dimensionality parameter to the array type to get
226191 -- multidimensional arrays. Multidimensional arrays would just be a
227192 -- convenience wrapper on top of single dimensional arrays.
228193
229− -- ** Streams of Arrays
230− -- *** Chunk
231− -- | Group a stream into arrays.
194+ -- | Operations dealing with multiple arrays, streams of arrays or
195+ -- multidimensional array representations.
196+
197+ -- *** Construct from streams
232198 , chunksOf
233199 , pinnedChunksOf
234200 , buildChunks
235201
236− -- *** Split
237− -- | Split an array into slices.
202+ -- *** Eliminate to streams
203+ , concatChunks
204+ , concatChunksRev
238205
206+ -- *** Construct from arrays
207+ -- get chunks without copying
208+ , getSliceUnsafe
209+ , getSlice
239210 -- , getSlicesFromLenN
211+ , splitAt -- XXX should be able to express using getSlice
240212 , splitOn
241− -- , slicesOf
242−
243− -- *** Concat
244− -- | Append the arrays in a stream to form a stream of elements.
245− , concatWith
246− , concatRevWith
247− , concat
248− , concatRev
249−
250− -- *** Compact
251− -- | Append the arrays in a stream to form a stream of larger arrays.
252− , SpliceState (..)
253− , pCompactLE
254− , pPinnedCompactLE
255− , compactLeAs
256− , fCompactGE
257− , fPinnedCompactGE
258− , lCompactGE
259− , lPinnedCompactGE
260− , compactGE
261− , compactEQ
213+ , breakOn
214+
215+ -- ** Cloning arrays
216+ , clone
217+ , pinnedClone
218+
219+ -- ** Appending arrays
220+ , spliceCopy
221+ , spliceWith
222+ , splice
223+ , spliceExp
224+ , spliceUnsafe
225+ -- , putSlice
226+ -- , appendSlice
227+ -- , appendSliceFrom
262228
263229 -- ** Utilities
264230 , roundUpToPower2
@@ -267,37 +233,12 @@ module Streamly.Internal.Data.MutArray.Type
267233 , c_memchr
268234
269235 -- * Deprecated
270− , asPtrUnsafe
271236 , writeChunks
272237 , flattenArrays
273238 , flattenArraysRev
274239 , fromArrayStreamK
275240 , fromStreamDN
276241 , fromStreamD
277− , cmp
278− , getIndices
279− , getIndicesWith
280− , resize
281− , resizeExp
282− , nil
283− , new
284− , pinnedNew
285− , pinnedNewBytes
286− , writeAppendNUnsafe
287− , writeAppendN
288− , writeAppendWith
289− , writeAppend
290− , writeNWithUnsafe
291− , writeNWith
292− , writeNUnsafe
293− , pinnedWriteNUnsafe
294− , writeN
295− , pinnedWriteN
296− , pinnedWriteNAligned -- XXX not required
297− , writeWith
298− , write
299− , pinnedWrite
300− , writeRevN
301242 )
302243where
303244
@@ -308,7 +249,6 @@ where
308249
309250import Control.Monad (when, void)
310251import Control.Monad.IO.Class (MonadIO(..))
311−import Data.Bifunctor (first)
312252import Data.Bits (shiftR, (.|.), (.&.))
313253import Data.Functor.Identity (Identity(..))
314254import Data.Proxy (Proxy(..))
@@ -317,6 +257,7 @@ import Foreign.C.Types (CSize(..), CInt(..))
317257import Foreign.Ptr (plusPtr, minusPtr, nullPtr)
318258import Streamly.Internal.Data.MutByteArray.Type
319259 ( MutByteArray(..)
260+ , MutableByteArray
320261 , PinnedState(..)
321262 , getMutableByteArray#
322263 , putSliceUnsafe
@@ -335,17 +276,13 @@ import GHC.Ptr (Ptr(..))
335276import Streamly.Internal.Data.Fold.Type (Fold(..))
336277import Streamly.Internal.Data.Producer.Type (Producer (..))
337278import Streamly.Internal.Data.Stream.Type (Stream)
338−import Streamly.Internal.Data.Parser.Type (Parser (..))
339279import Streamly.Internal.Data.StreamK.Type (StreamK)
340280import Streamly.Internal.Data.SVar.Type (adaptState, defState)
341−import Streamly.Internal.Data.Tuple.Strict (Tuple'(..))
342281import Streamly.Internal.Data.Unfold.Type (Unfold(..))
343282import Streamly.Internal.System.IO (arrayPayloadSize, defaultChunkSize)
344283
345284import qualified Streamly.Internal.Data.Fold.Type as FL
346285import qualified Streamly.Internal.Data.MutByteArray.Type as Unboxed
347−import qualified Streamly.Internal.Data.Parser.Type as Parser
348−-- import qualified Streamly.Internal.Data.Fold.Type as Fold
349286import qualified Streamly.Internal.Data.Producer as Producer
350287import qualified Streamly.Internal.Data.Stream.Type as D
351288import qualified Streamly.Internal.Data.Stream.Lift as D
@@ -353,7 +290,7 @@ import qualified Streamly.Internal.Data.StreamK.Type as K
353290import qualified Prelude
354291
355292import Prelude hiding
356− (Foldable(..), concat, read, unlines, splitAt, reverse, truncate)
293+ (Foldable(..), read, unlines, splitAt, reverse, truncate)
357294
358295#include "DocTestDataMutArray.hs"
359296
@@ -479,8 +416,6 @@ isPinned MutArray{..} = Unboxed.isPinned arrContents
479416-- we need more than that. See stg_pinnedNewAlignedByteArrayzh and
480417-- allocatePinned in GHC source.
481418
482−-- XXX Rename to emptyAlignedWith, alignSize should be first arg.
483−
484419-- | @newArrayWith allocator alignment count@ allocates a new array of zero
485420-- length and with a capacity to hold @count@ elements, using @allocator
486421-- size alignment@ as the memory allocator function.
@@ -504,25 +439,12 @@ newArrayWith alloc alignSize count = do
504439 , arrBound = size
505440 }
506441
507−-- For arrays "nil" sounds a bit odd. empty is better. The only problem with
508−-- empty is that it is also used by the Alternative type class. But assuming we
509−-- will mostly import the Array module qualified this should be fine.
510−
511−-- | Create an empty array.
512−empty ::
513−#ifdef DEVBUILD
514− Unbox a =>
515−#endif
516− MutArray a
517−empty = MutArray Unboxed.empty 0 0 0
518−
519−{-# DEPRECATED nil "Please use empty instead." #-}
520442nil ::
521443#ifdef DEVBUILD
522444 Unbox a =>
523445#endif
524446 MutArray a
525−nil = empty
447+nil = MutArray Unboxed.nil 0 0 0
526448
527449{-# INLINE newBytesAs #-}
528450newBytesAs :: MonadIO m =>
@@ -539,13 +461,12 @@ newBytesAs ps bytes = do
539461 , arrBound = bytes
540462 }
541463
542−-- | Allocates a pinned empty array that with a reserved capacity of bytes.
543−-- The memory of the array is uninitialized and the allocation is aligned as
544−-- per the 'Unboxed' instance of the type.
464+-- | Allocates a pinned empty array that can hold 'count' items. The memory of
465+-- the array is uninitialized and the allocation is aligned as per the
466+-- 'Unboxed' instance of the type.
545467--
546468-- /Pre-release/
547469{-# INLINE pinnedNewBytes #-}
548−{-# DEPRECATED pinnedNewBytes "Please use pinnedEmptyOf with appropriate calculation" #-}
549470pinnedNewBytes :: MonadIO m =>
550471#ifdef DEVBUILD
551472 Unbox a =>
@@ -570,31 +491,21 @@ newAs ps =
570491 (error "new: alignment is not used in unpinned arrays.")
571492
572493-- XXX can unaligned allocation be more efficient when alignment is not needed?
573−
574−-- | Allocates a pinned array of zero length but growable to the specified
575−-- capacity without reallocation.
576−{-# INLINE pinnedEmptyOf #-}
577−pinnedEmptyOf :: forall m a. (MonadIO m, Unbox a) => Int -> m (MutArray a)
578−pinnedEmptyOf = newAs Pinned
579−
580−-- XXX Deprecate in major
581−-- {-# DEPRECATED pinnedNew "Please use pinnedEmptyOf instead." #-}
494+--
495+-- | Allocates an empty pinned array that can hold 'count' items. The memory of
496+-- the array is uninitialized and the allocation is aligned as per the 'Unboxed'
497+-- instance of the type.
498+--
582499{-# INLINE pinnedNew #-}
583500pinnedNew :: forall m a. (MonadIO m, Unbox a) => Int -> m (MutArray a)
584−pinnedNew = pinnedEmptyOf
501+pinnedNew = newAs Pinned
585502
586−-- | Allocates an unpinned array of zero length but growable to the specified
587−-- capacity without reallocation.
503+-- | Allocates an empty unpinned array that can hold 'count' items. The memory
504+-- of the array is uninitialized.
588505--
589−{-# INLINE emptyOf #-}
590−emptyOf :: (MonadIO m, Unbox a) => Int -> m (MutArray a)
591−emptyOf = newAs Unpinned
592−
593−-- XXX Deprecate in major
594−-- {-# DEPRECATED new "Please use emptyOf instead." #-}
595506{-# INLINE new #-}
596507new :: (MonadIO m, Unbox a) => Int -> m (MutArray a)
597−new = emptyOf
508+new = newAs Unpinned
598509
599510-------------------------------------------------------------------------------
600511-- Random writes
@@ -642,7 +553,7 @@ putIndices arr = FL.foldlM' step (return ())
642553
643554 where
644555
645− step () (i, x) = putIndex i arr x
556+ step () (i, x) = liftIO (putIndex i arr x)
646557
647558-- | Modify a given index of an array using a modifier function.
648559--
@@ -838,19 +749,22 @@ arrayChunkBytes = 1024
838749roundDownTo :: Int -> Int -> Int
839750roundDownTo elemSize size = size - (size `mod` elemSize)
840751
752+-- XXX See if resizing can be implemented by reading the old array as a stream
753+-- and then using writeN to the new array.
754+--
841755-- NOTE: we are passing elemSize explicitly to avoid an Unboxed constraint.
842756-- Since this is not inlined Unboxed consrraint leads to dictionary passing
843757-- which complicates some inspection tests.
844758--
845−{-# NOINLINE reallocExplicitAs #-}
846−reallocExplicitAs :: PinnedState -> Int -> Int -> MutArray a -> IO (MutArray a)
847−reallocExplicitAs ps elemSize newCapacityInBytes MutArray{..} = do
759+{-# NOINLINE reallocExplicit #-}
760+reallocExplicit :: Int -> Int -> MutArray a -> IO (MutArray a)
761+reallocExplicit elemSize newCapacityInBytes MutArray{..} = do
848762 assertM(arrEnd <= arrBound)
849763
850764 -- Allocate new array
851765 let newCapMaxInBytes = roundUpLargeArray newCapacityInBytes
852766 contents <-
853− if ps == Pinned
767+ if Unboxed.isPinned arrContents
854768 then Unboxed.pinnedNew newCapMaxInBytes
855769 else Unboxed.new newCapMaxInBytes
856770 let !(MutByteArray mbarrFrom#) = arrContents
@@ -875,10 +789,6 @@ reallocExplicitAs ps elemSize newCapacityInBytes MutArray{..} = do
875789 , arrBound = newCapInBytes
876790 }
877791
878−-- XXX Should these be called reallocBytes etc?
879−-- XXX We may also need reallocAs to allocate as pinned/unpinned explicitly. In
880−-- fact clone/pinnedClone can be implemented using reallocAs.
881−
882792-- | @realloc newCapacity array@ reallocates the array to the specified
883793-- capacity in bytes.
884794--
@@ -890,12 +800,7 @@ reallocExplicitAs ps elemSize newCapacityInBytes MutArray{..} = do
890800-- If the original array is pinned, the newly allocated array is also pinned.
891801{-# INLINABLE realloc #-}
892802realloc :: forall m a. (MonadIO m, Unbox a) => Int -> MutArray a -> m (MutArray a)
893−realloc bytes arr =
894− let ps =
895− if isPinned arr
896− then Pinned
897− else Unpinned
898− in liftIO $ reallocExplicitAs ps (SIZE_OF(a)) bytes arr
803+realloc bytes arr = liftIO $ reallocExplicit (SIZE_OF(a)) bytes arr
899804
900805-- | @reallocWith label capSizer minIncrBytes array@. The label is used
901806-- in error messages and the capSizer is used to determine the capacity of the
@@ -918,14 +823,14 @@ reallocWith label capSizer minIncrBytes arr = do
918823 where
919824
920825 badSize newSize =
921− Prelude.concat
826+ concat
922827 [ label
923828 , ": new array size (in bytes) is less than required size "
924829 , show newSize
925830 , ". Please check the sizing function passed."
926831 ]
927832
928−-- | @grow newCapacity array@ changes the total capacity of the array so that
833+-- | @resize newCapacity array@ changes the total capacity of the array so that
929834-- it is enough to hold the specified number of elements. Nothing is done if
930835-- the specified capacity is less than the length of the array.
931836--
@@ -933,46 +838,34 @@ reallocWith label capSizer minIncrBytes arr = do
933838-- the block size (4K).
934839--
935840-- /Pre-release/
936−{-# INLINE grow #-}
937−grow :: forall m a. (MonadIO m, Unbox a) =>
841+{-# INLINE resize #-}
842+resize :: forall m a. (MonadIO m, Unbox a) =>
938843 Int -> MutArray a -> m (MutArray a)
939−grow nElems arr@MutArray{..} = do
844+resize nElems arr@MutArray{..} = do
940845 let req = SIZE_OF(a) * nElems
941− cap = arrBound - arrStart
942− if req < cap
846+ len = arrEnd - arrStart
847+ if req < len
943848 then return arr
944849 else realloc req arr
945850
946−{-# DEPRECATED resize "Please use grow instead." #-}
947−{-# INLINE resize #-}
948−resize :: forall m a. (MonadIO m, Unbox a) =>
949− Int -> MutArray a -> m (MutArray a)
950−resize = grow
951−
952−-- | Like 'grow' but if the requested byte capacity is more than
953−-- 'largeObjectThreshold' then it is rounded up to the closest power of 2.
851+-- | Like 'resize' but if the byte capacity is more than 'largeObjectThreshold'
852+-- then it is rounded up to the closest power of 2.
954853--
955854-- /Pre-release/
956−{-# INLINE growExp #-}
957−growExp :: forall m a. (MonadIO m, Unbox a) =>
855+{-# INLINE resizeExp #-}
856+resizeExp :: forall m a. (MonadIO m, Unbox a) =>
958857 Int -> MutArray a -> m (MutArray a)
959−growExp nElems arr@MutArray{..} = do
858+resizeExp nElems arr@MutArray{..} = do
960859 let req = roundUpLargeArray (SIZE_OF(a) * nElems)
961860 req1 =
962861 if req > largeObjectThreshold
963862 then roundUpToPower2 req
964863 else req
965− cap = arrBound - arrStart
966− if req1 < cap
864+ len = arrEnd - arrStart
865+ if req1 < len
967866 then return arr
968867 else realloc req1 arr
969868
970−{-# DEPRECATED resizeExp "Please use growExp instead." #-}
971−{-# INLINE resizeExp #-}
972−resizeExp :: forall m a. (MonadIO m, Unbox a) =>
973− Int -> MutArray a -> m (MutArray a)
974−resizeExp = growExp
975−
976869-- | Resize the allocated memory to drop any reserved free space at the end of
977870-- the array and reallocate it to reduce wastage.
978871--
@@ -1037,7 +930,7 @@ snocUnsafe arr@MutArray{..} = snocNewEnd (INDEX_NEXT(arrEnd,a)) arr
1037930{-# INLINE snocMay #-}
1038931snocMay :: forall m a. (MonadIO m, Unbox a) =>
1039932 MutArray a -> a -> m (Maybe (MutArray a))
1040−snocMay arr@MutArray{..} x = do
933+snocMay arr@MutArray{..} x = liftIO $ do
1041934 let newEnd = INDEX_NEXT(arrEnd,a)
1042935 if newEnd <= arrBound
1043936 then Just <$> snocNewEnd newEnd arr x
@@ -1051,7 +944,7 @@ snocWithRealloc :: forall m a. (MonadIO m, Unbox a) =>
1051944 -> a
1052945 -> m (MutArray a)
1053946snocWithRealloc sizer arr x = do
1054− arr1 <- reallocWith "snocWith" sizer (SIZE_OF(a)) arr
947+ arr1 <- liftIO $ reallocWith "snocWith" sizer (SIZE_OF(a)) arr
1055948 snocUnsafe arr1 x
1056949
1057950-- | @snocWith sizer arr elem@ mutates @arr@ to append @elem@. The length of
@@ -1073,7 +966,7 @@ snocWith :: forall m a. (MonadIO m, Unbox a) =>
1073966 -> MutArray a
1074967 -> a
1075968 -> m (MutArray a)
1076−snocWith allocSize arr x = do
969+snocWith allocSize arr x = liftIO $ do
1077970 let newEnd = INDEX_NEXT(arrEnd arr,a)
1078971 if newEnd <= arrBound arr
1079972 then snocNewEnd newEnd arr x
@@ -1117,126 +1010,6 @@ snoc = snocWith f
11171010 then oldSize * 2
11181011 else roundUpToPower2 oldSize * 2
11191012
1120−-------------------------------------------------------------------------------
1121−-- Serialization/Deserialization
1122−-------------------------------------------------------------------------------
1123−
1124−{-# INLINE pokeNewEnd #-}
1125−pokeNewEnd :: (MonadIO m, Unbox a) =>
1126− Int -> MutArray Word8 -> a -> m (MutArray Word8)
1127−pokeNewEnd newEnd arr@MutArray{..} x = liftIO $ do
1128− assert (newEnd <= arrBound) (return ())
1129− liftIO $ pokeAt arrEnd arrContents x
1130− return $ arr {arrEnd = newEnd}
1131−
1132−-- | Really really unsafe, unboxes a Haskell type and appends the resulting
1133−-- bytes to the byte array, may cause silent data corruption or if you are
1134−-- lucky a segfault if the array does not have enough space to append the
1135−-- element.
1136−--
1137−-- /Internal/
1138−{-# INLINE pokeAppendUnsafe #-}
1139−pokeAppendUnsafe :: forall m a. (MonadIO m, Unbox a) =>
1140− MutArray Word8 -> a -> m (MutArray Word8)
1141−pokeAppendUnsafe arr@MutArray{..} = pokeNewEnd (arrEnd + SIZE_OF(a)) arr
1142−
1143−-- | Skip the specified number of bytes in the array. The data in the skipped
1144−-- region remains uninitialzed.
1145−{-# INLINE pokeSkipUnsafe #-}
1146−pokeSkipUnsafe :: Int -> MutArray Word8 -> MutArray Word8
1147−pokeSkipUnsafe n arr@MutArray{..} = do
1148− let newEnd = arrEnd + n
1149− in assert (newEnd <= arrBound) (arr {arrEnd = newEnd})
1150−
1151−-- | Like 'pokeAppend' but does not grow the array when pre-allocated array
1152−-- capacity becomes full.
1153−--
1154−-- /Internal/
1155−{-# INLINE pokeAppendMay #-}
1156−pokeAppendMay :: forall m a. (MonadIO m, Unbox a) =>
1157− MutArray Word8 -> a -> m (Maybe (MutArray Word8))
1158−pokeAppendMay arr@MutArray{..} x = liftIO $ do
1159− let newEnd = arrEnd + SIZE_OF(a)
1160− if newEnd <= arrBound
1161− then Just <$> pokeNewEnd newEnd arr x
1162− else return Nothing
1163−
1164−{-# NOINLINE pokeWithRealloc #-}
1165−pokeWithRealloc :: forall m a. (MonadIO m, Unbox a) =>
1166− (Int -> Int)
1167− -> MutArray Word8
1168− -> a
1169− -> m (MutArray Word8)
1170−pokeWithRealloc sizer arr x = do
1171− arr1 <- liftIO $ reallocWith "pokeWithRealloc" sizer (SIZE_OF(a)) arr
1172− pokeAppendUnsafe arr1 x
1173−
1174−{-# INLINE pokeAppendWith #-}
1175−pokeAppendWith :: forall m a. (MonadIO m, Unbox a) =>
1176− (Int -> Int)
1177− -> MutArray Word8
1178− -> a
1179− -> m (MutArray Word8)
1180−pokeAppendWith allocSize arr x = liftIO $ do
1181− let newEnd = arrEnd arr + SIZE_OF(a)
1182− if newEnd <= arrBound arr
1183− then pokeNewEnd newEnd arr x
1184− else pokeWithRealloc allocSize arr x
1185−
1186−-- | Unbox a Haskell type and append the resulting bytes to a mutable byte
1187−-- array. The array is grown exponentially when more space is needed.
1188−--
1189−-- Definition:
1190−--
1191−-- >>> pokeAppend arr x = MutArray.castUnsafe <$> MutArray.snoc (MutArray.castUnsafe arr) x
1192−--
1193−{-# INLINE pokeAppend #-}
1194−pokeAppend :: forall m a. (MonadIO m, Unbox a) =>
1195− MutArray Word8 -> a -> m (MutArray Word8)
1196−pokeAppend = pokeAppendWith f
1197−
1198− where
1199−
1200− f oldSize =
1201− if isPower2 oldSize
1202− then oldSize * 2
1203− else roundUpToPower2 oldSize * 2
1204−
1205−-- | Really really unsafe, create a Haskell value from an unboxed byte array,
1206−-- does not check if the array is big enough, may return garbage or if you are
1207−-- lucky may cause a segfault.
1208−--
1209−-- /Internal/
1210−{-# INLINE peekUnconsUnsafe #-}
1211−peekUnconsUnsafe :: forall m a. (MonadIO m, Unbox a) =>
1212− MutArray Word8 -> m (a, MutArray Word8)
1213−peekUnconsUnsafe MutArray{..} = do
1214− let start1 = arrStart + SIZE_OF(a)
1215− assert (start1 <= arrEnd) (return ())
1216− liftIO $ do
1217− r <- peekAt arrStart arrContents
1218− return (r, MutArray arrContents start1 arrEnd arrBound)
1219−
1220−-- | Discard the specified number of bytes in the array.
1221−{-# INLINE peekSkipUnsafe #-}
1222−peekSkipUnsafe :: Int -> MutArray Word8 -> MutArray Word8
1223−peekSkipUnsafe n MutArray{..} =
1224− let start1 = arrStart + n
1225− in assert (start1 <= arrEnd) (MutArray arrContents start1 arrEnd arrBound)
1226−
1227−-- | Create a Haskell value from its unboxed representation from the head of a
1228−-- byte array, return the value and the remaining array.
1229−{-# INLINE peekUncons #-}
1230−peekUncons :: forall m a. (MonadIO m, Unbox a) =>
1231− MutArray Word8 -> m (Maybe a, MutArray Word8)
1232−peekUncons arr@MutArray{..} = do
1233− let start1 = arrStart + SIZE_OF(a)
1234− if start1 > arrEnd
1235− then return (Nothing, arr)
1236− else liftIO $ do
1237− r <- peekAt arrStart arrContents
1238− return (Just r, MutArray arrContents start1 arrEnd arrBound)
1239−
12401013-------------------------------------------------------------------------------
12411014-- Random reads
12421015-------------------------------------------------------------------------------
@@ -1279,10 +1052,10 @@ getIndexRev i MutArray{..} = do
12791052data GetIndicesState contents start end st =
12801053 GetIndicesState contents start end st
12811054
1282−{-# INLINE indexReaderWith #-}
1283−indexReaderWith :: (Monad m, Unbox a) =>
1055+{-# INLINE getIndicesWith #-}
1056+getIndicesWith :: (Monad m, Unbox a) =>
12841057 (forall b. IO b -> m b) -> D.Stream m Int -> Unfold m (MutArray a) a
1285−indexReaderWith liftio (D.Stream stepi sti) = Unfold step inject
1058+getIndicesWith liftio (D.Stream stepi sti) = Unfold step inject
12861059
12871060 where
12881061
@@ -1301,26 +1074,14 @@ indexReaderWith liftio (D.Stream stepi sti) = Unfold step inject
13011074 D.Skip s -> return $ D.Skip (GetIndicesState contents start end s)
13021075 D.Stop -> return D.Stop
13031076
1304−{-# DEPRECATED getIndicesWith "Please use indexReaderWith instead." #-}
1305−{-# INLINE getIndicesWith #-}
1306−getIndicesWith :: (Monad m, Unbox a) =>
1307− (forall b. IO b -> m b) -> D.Stream m Int -> Unfold m (MutArray a) a
1308−getIndicesWith = indexReaderWith
1309−
13101077-- | Given an unfold that generates array indices, read the elements on those
13111078-- indices from the supplied MutArray. An error is thrown if an index is out of
13121079-- bounds.
13131080--
13141081-- /Pre-release/
1315−{-# INLINE indexReader #-}
1316−indexReader :: (MonadIO m, Unbox a) => Stream m Int -> Unfold m (MutArray a) a
1317−indexReader = indexReaderWith liftIO
1318−
1319−-- XXX DO NOT REMOVE, change the signature to use Stream instead of unfold
1320−{-# DEPRECATED getIndices "Please use indexReader instead." #-}
13211082{-# INLINE getIndices #-}
13221083getIndices :: (MonadIO m, Unbox a) => Stream m Int -> Unfold m (MutArray a) a
1323−getIndices = indexReader
1084+getIndices = getIndicesWith liftIO
13241085
13251086-------------------------------------------------------------------------------
13261087-- Subarrays
@@ -1615,7 +1376,7 @@ chunksOfAs ps n (D.Stream step state) =
16151376--
16161377-- Same as the following but may be more efficient:
16171378--
1618−-- >>> chunksOf n = Stream.foldMany (MutArray.createOf n)
1379+-- >>> chunksOf n = Stream.foldMany (MutArray.writeN n)
16191380--
16201381-- /Pre-release/
16211382{-# INLINE_NORMAL chunksOf #-}
@@ -1624,14 +1385,14 @@ chunksOf :: forall m a. (MonadIO m, Unbox a)
16241385-- XXX the idiomatic implementation leads to large regression in the D.reverse'
16251386-- benchmark. It seems it has difficulty producing optimized code when
16261387-- converting to StreamK. Investigate GHC optimizations.
1627−-- chunksOf n = D.foldMany (createOf n)
1388+-- chunksOf n = D.foldMany (writeN n)
16281389chunksOf = chunksOfAs Unpinned
16291390
16301391-- | Like 'chunksOf' but creates pinned arrays.
16311392{-# INLINE_NORMAL pinnedChunksOf #-}
16321393pinnedChunksOf :: forall m a. (MonadIO m, Unbox a)
16331394 => Int -> D.Stream m a -> D.Stream m (MutArray a)
1634−-- pinnedChunksOf n = D.foldMany (pinnedCreateOf n)
1395+-- pinnedChunksOf n = D.foldMany (pinnedWriteN n)
16351396pinnedChunksOf = chunksOfAs Pinned
16361397
16371398-- | When we are buffering a stream of unknown size into an array we do not
@@ -1664,10 +1425,16 @@ data FlattenState s contents a =
16641425 OuterLoop s
16651426 | InnerLoop s contents !Int !Int
16661427
1667−{-# INLINE_NORMAL concatWith #-}
1668−concatWith :: forall m a. (Monad m, Unbox a)
1669− => (forall b. IO b -> m b) -> D.Stream m (MutArray a) -> D.Stream m a
1670−concatWith liftio (D.Stream step state) = D.Stream step' (OuterLoop state)
1428+-- | Use the "reader" unfold instead.
1429+--
1430+-- @concatChunks = unfoldMany reader@
1431+--
1432+-- We can try this if there are any fusion issues in the unfold.
1433+--
1434+{-# INLINE_NORMAL concatChunks #-}
1435+concatChunks :: forall m a. (MonadIO m, Unbox a)
1436+ => D.Stream m (MutArray a) -> D.Stream m a
1437+concatChunks (D.Stream step state) = D.Stream step' (OuterLoop state)
16711438
16721439 where
16731440
@@ -1684,30 +1451,24 @@ concatWith liftio (D.Stream step state) = D.Stream step' (OuterLoop state)
16841451 return $ D.Skip $ OuterLoop st
16851452
16861453 step' _ (InnerLoop st contents p end) = do
1687− x <- liftio $ peekAt p contents
1454+ x <- liftIO $ peekAt p contents
16881455 return $ D.Yield x (InnerLoop st contents (INDEX_NEXT(p,a)) end)
16891456
1690−-- | Use the "reader" unfold instead.
1457+{-# DEPRECATED flattenArrays "Please use \"unfoldMany reader\" instead." #-}
1458+flattenArrays :: forall m a. (MonadIO m, Unbox a)
1459+ => D.Stream m (MutArray a) -> D.Stream m a
1460+flattenArrays = concatChunks
1461+
1462+-- | Use the "readerRev" unfold instead.
16911463--
1692−-- @concat = unfoldMany reader@
1464+-- @concatChunks = unfoldMany readerRev@
16931465--
16941466-- We can try this if there are any fusion issues in the unfold.
16951467--
1696−{-# INLINE_NORMAL concat #-}
1697−concat :: forall m a. (MonadIO m, Unbox a)
1468+{-# INLINE_NORMAL concatChunksRev #-}
1469+concatChunksRev :: forall m a. (MonadIO m, Unbox a)
16981470 => D.Stream m (MutArray a) -> D.Stream m a
1699−concat = concatWith liftIO
1700−
1701−{-# DEPRECATED flattenArrays "Please use \"unfoldMany reader\" instead." #-}
1702−{-# INLINE flattenArrays #-}
1703−flattenArrays :: forall m a. (MonadIO m, Unbox a)
1704− => D.Stream m (MutArray a) -> D.Stream m a
1705−flattenArrays = concat
1706−
1707−{-# INLINE_NORMAL concatRevWith #-}
1708−concatRevWith :: forall m a. (Monad m, Unbox a)
1709− => (forall b. IO b -> m b) -> D.Stream m (MutArray a) -> D.Stream m a
1710−concatRevWith liftio (D.Stream step state) = D.Stream step' (OuterLoop state)
1471+concatChunksRev (D.Stream step state) = D.Stream step' (OuterLoop state)
17111472
17121473 where
17131474
@@ -1725,26 +1486,14 @@ concatRevWith liftio (D.Stream step state) = D.Stream step' (OuterLoop state)
17251486 return $ D.Skip $ OuterLoop st
17261487
17271488 step' _ (InnerLoop st contents p start) = do
1728− x <- liftio $ peekAt p contents
1489+ x <- liftIO $ peekAt p contents
17291490 let cur = INDEX_PREV(p,a)
17301491 return $ D.Yield x (InnerLoop st contents cur start)
17311492
1732−-- | Use the "readerRev" unfold instead.
1733−--
1734−-- @concat = unfoldMany readerRev@
1735−--
1736−-- We can try this if there are any fusion issues in the unfold.
1737−--
1738−{-# INLINE_NORMAL concatRev #-}
1739−concatRev :: forall m a. (MonadIO m, Unbox a)
1740− => D.Stream m (MutArray a) -> D.Stream m a
1741−concatRev = concatRevWith liftIO
1742−
17431493{-# DEPRECATED flattenArraysRev "Please use \"unfoldMany readerRev\" instead." #-}
1744−{-# INLINE flattenArraysRev #-}
17451494flattenArraysRev :: forall m a. (MonadIO m, Unbox a)
17461495 => D.Stream m (MutArray a) -> D.Stream m a
1747−flattenArraysRev = concatRev
1496+flattenArraysRev = concatChunksRev
17481497
17491498-------------------------------------------------------------------------------
17501499-- Unfolds
@@ -1863,11 +1612,11 @@ toList MutArray{..} = liftIO $ go arrStart
18631612 x <- peekAt p arrContents
18641613 (:) x <$> go (INDEX_NEXT(p,a))
18651614
1866−{-# INLINE_NORMAL toStreamWith #-}
1867−toStreamWith ::
1615+{-# INLINE_NORMAL toStreamDWith #-}
1616+toStreamDWith ::
18681617 forall m a. (Monad m, Unbox a)
18691618 => (forall b. IO b -> m b) -> MutArray a -> D.Stream m a
1870−toStreamWith liftio MutArray{..} = D.Stream step arrStart
1619+toStreamDWith liftio MutArray{..} = D.Stream step arrStart
18711620
18721621 where
18731622
@@ -1883,7 +1632,7 @@ toStreamWith liftio MutArray{..} = D.Stream step arrStart
18831632--
18841633{-# INLINE_NORMAL read #-}
18851634read :: forall m a. (MonadIO m, Unbox a) => MutArray a -> D.Stream m a
1886−read = toStreamWith liftIO
1635+read = toStreamDWith liftIO
18871636
18881637{-# INLINE toStreamKWith #-}
18891638toStreamKWith ::
@@ -1902,11 +1651,11 @@ toStreamKWith liftio MutArray{..} = go arrStart
19021651toStreamK :: forall m a. (MonadIO m, Unbox a) => MutArray a -> StreamK m a
19031652toStreamK = toStreamKWith liftIO
19041653
1905−{-# INLINE_NORMAL toStreamRevWith #-}
1906−toStreamRevWith ::
1654+{-# INLINE_NORMAL toStreamDRevWith #-}
1655+toStreamDRevWith ::
19071656 forall m a. (Monad m, Unbox a)
19081657 => (forall b. IO b -> m b) -> MutArray a -> D.Stream m a
1909−toStreamRevWith liftio MutArray{..} =
1658+toStreamDRevWith liftio MutArray{..} =
19101659 let p = INDEX_PREV(arrEnd,a)
19111660 in D.Stream step p
19121661
@@ -1924,7 +1673,7 @@ toStreamRevWith liftio MutArray{..} =
19241673--
19251674{-# INLINE_NORMAL readRev #-}
19261675readRev :: forall m a. (MonadIO m, Unbox a) => MutArray a -> D.Stream m a
1927−readRev = toStreamRevWith liftIO
1676+readRev = toStreamDRevWith liftIO
19281677
19291678{-# INLINE toStreamKRevWith #-}
19301679toStreamKRevWith ::
@@ -1973,7 +1722,7 @@ foldr f z arr = D.foldr f z $ read arr
19731722
19741723-- XXX Keep the bound intact to not lose any free space? Perf impact?
19751724
1976−-- | @unsafeAppendN n arr@ appends up to @n@ input items to the supplied
1725+-- | @writeAppendNUnsafe n arr@ appends up to @n@ input items to the supplied
19771726-- array.
19781727--
19791728-- Unsafe: Do not drive the fold beyond @n@ elements, it will lead to memory
@@ -1982,12 +1731,13 @@ foldr f z arr = D.foldr f z $ read arr
19821731-- Any free space left in the array after appending @n@ elements is lost.
19831732--
19841733-- /Internal/
1985−{-# INLINE_NORMAL unsafeAppendN #-}
1986−unsafeAppendN :: forall m a. (MonadIO m, Unbox a) =>
1734+{-# INLINE_NORMAL writeAppendNUnsafe #-}
1735+writeAppendNUnsafe :: forall m a. (MonadIO m, Unbox a) =>
19871736 Int
19881737 -> m (MutArray a)
19891738 -> Fold m a (MutArray a)
1990−unsafeAppendN n action = fmap fromArrayUnsafe $ FL.foldlM' step initial
1739+writeAppendNUnsafe n action =
1740+ fmap fromArrayUnsafe $ FL.foldlM' step initial
19911741
19921742 where
19931743
@@ -2000,7 +1750,7 @@ unsafeAppendN n action = fmap fromArrayUnsafe $ FL.foldlM' step initial
20001750 -- otherwise we lose that space.
20011751 arr1 <-
20021752 if free < needed
2003− then noinline reallocWith "unsafeAppendN" (+ needed) needed arr
1753+ then noinline reallocWith "writeAppendNUnsafeWith" (+ needed) needed arr
20041754 else return arr
20051755 return $ toArrayUnsafe arr1
20061756
@@ -2008,51 +1758,30 @@ unsafeAppendN n action = fmap fromArrayUnsafe $ FL.foldlM' step initial
20081758 liftIO $ pokeAt end contents x
20091759 return $ ArrayUnsafe contents start (INDEX_NEXT(end,a))
20101760
2011−{-# DEPRECATED writeAppendNUnsafe "Please use unsafeAppendN instead." #-}
2012−{-# INLINE writeAppendNUnsafe #-}
2013−writeAppendNUnsafe :: forall m a. (MonadIO m, Unbox a) =>
2014− Int
2015− -> m (MutArray a)
2016− -> Fold m a (MutArray a)
2017−writeAppendNUnsafe = unsafeAppendN
2018−
20191761-- | Append @n@ elements to an existing array. Any free space left in the array
20201762-- after appending @n@ elements is lost.
20211763--
2022−-- >>> appendN n initial = Fold.take n (MutArray.unsafeAppendN n initial)
1764+-- >>> writeAppendN n initial = Fold.take n (MutArray.writeAppendNUnsafe n initial)
20231765--
2024−{-# INLINE_NORMAL appendN #-}
2025−appendN :: forall m a. (MonadIO m, Unbox a) =>
2026− Int -> m (MutArray a) -> Fold m a (MutArray a)
2027−appendN n initial = FL.take n (unsafeAppendN n initial)
2028−
2029−-- XXX Deprecate in major
2030−-- {-# DEPRECATED writeAppendN "Please use appendN instead." #-}
2031−{-# INLINE writeAppendN #-}
1766+{-# INLINE_NORMAL writeAppendN #-}
20321767writeAppendN :: forall m a. (MonadIO m, Unbox a) =>
20331768 Int -> m (MutArray a) -> Fold m a (MutArray a)
2034−writeAppendN = appendN
1769+writeAppendN n initial = FL.take n (writeAppendNUnsafe n initial)
20351770
2036−-- | @appendWith realloc action@ mutates the array generated by @action@ to
1771+-- | @writeAppendWith realloc action@ mutates the array generated by @action@ to
20371772-- append the input stream. If there is no reserved space available in the
20381773-- array it is reallocated to a size in bytes determined by @realloc oldSize@,
20391774-- where @oldSize@ is the current size of the array in bytes.
20401775--
20411776-- Note that the returned array may be a mutated version of original array.
20421777--
2043−-- >>> appendWith sizer = Fold.foldlM' (MutArray.snocWith sizer)
1778+-- >>> writeAppendWith sizer = Fold.foldlM' (MutArray.snocWith sizer)
20441779--
20451780-- /Pre-release/
2046−{-# INLINE appendWith #-}
2047−appendWith :: forall m a. (MonadIO m, Unbox a) =>
2048− (Int -> Int) -> m (MutArray a) -> Fold m a (MutArray a)
2049−appendWith sizer = FL.foldlM' (snocWith sizer)
2050−
2051−{-# DEPRECATED writeAppendWith "Please use appendWith instead." #-}
20521781{-# INLINE writeAppendWith #-}
20531782writeAppendWith :: forall m a. (MonadIO m, Unbox a) =>
20541783 (Int -> Int) -> m (MutArray a) -> Fold m a (MutArray a)
2055−writeAppendWith = appendWith
1784+writeAppendWith sizer = FL.foldlM' (snocWith sizer)
20561785
20571786-- | @append action@ mutates the array generated by @action@ to append the
20581787-- input stream. If there is no reserved space available in the array it is
@@ -2060,33 +1789,26 @@ writeAppendWith = appendWith
20601789--
20611790-- Note that the returned array may be a mutated version of original array.
20621791--
2063−-- >>> append = MutArray.appendWith (* 2)
1792+-- >>> writeAppend = MutArray.writeAppendWith (* 2)
20641793--
2065−{-# INLINE append #-}
2066−append :: forall m a. (MonadIO m, Unbox a) =>
2067− m (MutArray a) -> Fold m a (MutArray a)
2068−append = appendWith (* 2)
2069−
2070−-- XXX Deprecate in major
2071−-- {-# DEPRECATED writeAppend "Please use append instead." #-}
20721794{-# INLINE writeAppend #-}
20731795writeAppend :: forall m a. (MonadIO m, Unbox a) =>
20741796 m (MutArray a) -> Fold m a (MutArray a)
2075−writeAppend = append
1797+writeAppend = writeAppendWith (* 2)
20761798
20771799-- XXX We can carry bound as well in the state to make sure we do not lose the
20781800-- remaining capacity. Need to check perf impact.
20791801--
2080−-- | Like 'unsafeCreateOf' but takes a new array allocator @alloc size@
2081−-- function as argument.
1802+-- | Like 'writeNUnsafe' but takes a new array allocator @alloc size@ function
1803+-- as argument.
20821804--
2083−-- >>> unsafeCreateOfWith alloc n = MutArray.unsafeAppendN (alloc n) n
1805+-- >>> writeNWithUnsafe alloc n = MutArray.writeAppendNUnsafe (alloc n) n
20841806--
20851807-- /Pre-release/
2086−{-# INLINE_NORMAL unsafeCreateOfWith #-}
2087−unsafeCreateOfWith :: forall m a. (MonadIO m, Unbox a)
1808+{-# INLINE_NORMAL writeNWithUnsafe #-}
1809+writeNWithUnsafe :: forall m a. (MonadIO m, Unbox a)
20881810 => (Int -> m (MutArray a)) -> Int -> Fold m a (MutArray a)
2089−unsafeCreateOfWith alloc n = fromArrayUnsafe <$> FL.foldlM' step initial
1811+writeNWithUnsafe alloc n = fromArrayUnsafe <$> FL.foldlM' step initial
20901812
20911813 where
20921814
@@ -2097,64 +1819,40 @@ unsafeCreateOfWith alloc n = fromArrayUnsafe <$> FL.foldlM' step initial
20971819 return
20981820 $ ArrayUnsafe contents start (INDEX_NEXT(end,a))
20991821
2100−{-# DEPRECATED writeNWithUnsafe "Please use unsafeCreateOfWith instead." #-}
2101−{-# INLINE writeNWithUnsafe #-}
2102−writeNWithUnsafe :: forall m a. (MonadIO m, Unbox a)
2103− => (Int -> m (MutArray a)) -> Int -> Fold m a (MutArray a)
2104−writeNWithUnsafe = unsafeCreateOfWith
2105−
21061822{-# INLINE_NORMAL writeNUnsafeAs #-}
21071823writeNUnsafeAs :: forall m a. (MonadIO m, Unbox a)
21081824 => PinnedState -> Int -> Fold m a (MutArray a)
2109−writeNUnsafeAs ps = unsafeCreateOfWith (newAs ps)
1825+writeNUnsafeAs ps = writeNWithUnsafe (newAs ps)
21101826
2111−-- | Like 'createOf' but does not check the array bounds when writing. The fold
1827+-- | Like 'writeN' but does not check the array bounds when writing. The fold
21121828-- driver must not call the step function more than 'n' times otherwise it will
21131829-- corrupt the memory and crash. This function exists mainly because any
21141830-- conditional in the step function blocks fusion causing 10x performance
21151831-- slowdown.
21161832--
2117−-- >>> unsafeCreateOf = MutArray.unsafeCreateOfWith MutArray.emptyOf
1833+-- >>> writeNUnsafe = MutArray.writeNWithUnsafe MutArray.new
21181834--
2119−{-# INLINE_NORMAL unsafeCreateOf #-}
2120−unsafeCreateOf :: forall m a. (MonadIO m, Unbox a)
2121− => Int -> Fold m a (MutArray a)
2122−unsafeCreateOf = writeNUnsafeAs Unpinned
2123−
2124−{-# DEPRECATED writeNUnsafe "Please use unsafeCreateOf instead." #-}
2125−{-# INLINE writeNUnsafe #-}
1835+{-# INLINE_NORMAL writeNUnsafe #-}
21261836writeNUnsafe :: forall m a. (MonadIO m, Unbox a)
21271837 => Int -> Fold m a (MutArray a)
2128−writeNUnsafe = unsafeCreateOf
1838+writeNUnsafe = writeNUnsafeAs Unpinned
21291839
2130−-- | Like 'unsafeCreateOf' but creates a pinned array.
2131−{-# INLINE_NORMAL unsafePinnedCreateOf #-}
2132−unsafePinnedCreateOf :: forall m a. (MonadIO m, Unbox a)
2133− => Int -> Fold m a (MutArray a)
2134−unsafePinnedCreateOf = writeNUnsafeAs Pinned
2135−
2136−{-# DEPRECATED pinnedWriteNUnsafe "Please use unsafePinnedCreateOf instead." #-}
2137−{-# INLINE pinnedWriteNUnsafe #-}
1840+-- | Like 'writeNUnsafe' but creates a pinned array.
1841+{-# INLINE_NORMAL pinnedWriteNUnsafe #-}
21381842pinnedWriteNUnsafe :: forall m a. (MonadIO m, Unbox a)
21391843 => Int -> Fold m a (MutArray a)
2140−pinnedWriteNUnsafe = unsafePinnedCreateOf
1844+pinnedWriteNUnsafe = writeNUnsafeAs Pinned
21411845
2142−-- | @createOfWith alloc n@ folds a maximum of @n@ elements into an array
1846+-- | @writeNWith alloc n@ folds a maximum of @n@ elements into an array
21431847-- allocated using the @alloc@ function.
21441848--
2145−-- >>> createOfWith alloc n = Fold.take n (MutArray.unsafeCreateOfWith alloc n)
2146−-- >>> createOfWith alloc n = MutArray.appendN (alloc n) n
1849+-- >>> writeNWith alloc n = Fold.take n (MutArray.writeNWithUnsafe alloc n)
1850+-- >>> writeNWith alloc n = MutArray.writeAppendN (alloc n) n
21471851--
2148−{-# INLINE_NORMAL createOfWith #-}
2149−createOfWith :: forall m a. (MonadIO m, Unbox a)
2150− => (Int -> m (MutArray a)) -> Int -> Fold m a (MutArray a)
2151−createOfWith alloc n = FL.take n (unsafeCreateOfWith alloc n)
2152−
2153−-- {-# DEPRECATED writeNWith "Please use createOfWith instead." #-}
2154−{-# INLINE writeNWith #-}
1852+{-# INLINE_NORMAL writeNWith #-}
21551853writeNWith :: forall m a. (MonadIO m, Unbox a)
21561854 => (Int -> m (MutArray a)) -> Int -> Fold m a (MutArray a)
2157−writeNWith = createOfWith
1855+writeNWith alloc n = FL.take n (writeNWithUnsafe alloc n)
21581856
21591857{-# INLINE_NORMAL writeNAs #-}
21601858writeNAs ::
@@ -2162,42 +1860,28 @@ writeNAs ::
21621860 => PinnedState
21631861 -> Int
21641862 -> Fold m a (MutArray a)
2165−writeNAs ps = createOfWith (newAs ps)
1863+writeNAs ps = writeNWith (newAs ps)
21661864
2167−-- | @createOf n@ folds a maximum of @n@ elements from the input stream to an
1865+-- | @writeN n@ folds a maximum of @n@ elements from the input stream to an
21681866-- 'MutArray'.
21691867--
2170−-- >>> createOf = MutArray.createOfWith MutArray.new
2171−-- >>> createOf n = Fold.take n (MutArray.unsafeCreateOf n)
2172−-- >>> createOf n = MutArray.appendN n (MutArray.emptyOf n)
1868+-- >>> writeN = MutArray.writeNWith MutArray.new
1869+-- >>> writeN n = Fold.take n (MutArray.writeNUnsafe n)
1870+-- >>> writeN n = MutArray.writeAppendN n (MutArray.new n)
21731871--
2174−{-# INLINE_NORMAL createOf #-}
2175−createOf :: forall m a. (MonadIO m, Unbox a) => Int -> Fold m a (MutArray a)
2176−createOf = writeNAs Unpinned
2177−
2178−-- XXX Deprecate in major
2179−-- {-# DEPRECATED writeN "Please use createOf instead." #-}
2180−{-# INLINE writeN #-}
1872+{-# INLINE_NORMAL writeN #-}
21811873writeN :: forall m a. (MonadIO m, Unbox a) => Int -> Fold m a (MutArray a)
2182−writeN = createOf
2183−
2184−-- | Like 'createOf' but creates a pinned array.
2185−{-# INLINE_NORMAL pinnedCreateOf #-}
2186−pinnedCreateOf ::
2187− forall m a. (MonadIO m, Unbox a)
2188− => Int
2189− -> Fold m a (MutArray a)
2190−pinnedCreateOf = writeNAs Pinned
1874+writeN = writeNAs Unpinned
21911875
2192−{-# DEPRECATED pinnedWriteN "Please use pinnedCreateOf instead." #-}
2193−{-# INLINE pinnedWriteN #-}
1876+-- | Like 'writeN' but creates a pinned array.
1877+{-# INLINE_NORMAL pinnedWriteN #-}
21941878pinnedWriteN ::
21951879 forall m a. (MonadIO m, Unbox a)
21961880 => Int
21971881 -> Fold m a (MutArray a)
2198−pinnedWriteN = pinnedCreateOf
1882+pinnedWriteN = writeNAs Pinned
21991883
2200−-- | Like unsafeCreateOfWith but writes the array in reverse order.
1884+-- | Like writeNWithUnsafe but writes the array in reverse order.
22011885--
22021886-- /Internal/
22031887{-# INLINE_NORMAL writeRevNWithUnsafe #-}
@@ -2218,7 +1902,7 @@ writeRevNWithUnsafe alloc n = fromArrayUnsafe <$> FL.foldlM' step initial
22181902 return
22191903 $ ArrayUnsafe contents ptr end
22201904
2221−-- | Like createOfWith but writes the array in reverse order.
1905+-- | Like writeNWith but writes the array in reverse order.
22221906--
22231907-- /Internal/
22241908{-# INLINE_NORMAL writeRevNWith #-}
@@ -2226,36 +1910,31 @@ writeRevNWith :: forall m a. (MonadIO m, Unbox a)
22261910 => (Int -> m (MutArray a)) -> Int -> Fold m a (MutArray a)
22271911writeRevNWith alloc n = FL.take n (writeRevNWithUnsafe alloc n)
22281912
2229−-- | Like 'createOf' but writes the array in reverse order.
1913+-- | Like writeN but writes the array in reverse order.
22301914--
22311915-- /Pre-release/
2232−{-# INLINE_NORMAL revCreateOf #-}
2233−revCreateOf :: forall m a. (MonadIO m, Unbox a) => Int -> Fold m a (MutArray a)
2234−revCreateOf = writeRevNWith new
2235−
2236−{-# DEPRECATED writeRevN "Please use revCreateOf instead." #-}
2237−{-# INLINE writeRevN #-}
1916+{-# INLINE_NORMAL writeRevN #-}
22381917writeRevN :: forall m a. (MonadIO m, Unbox a) => Int -> Fold m a (MutArray a)
2239−writeRevN = revCreateOf
1918+writeRevN = writeRevNWith new
22401919
22411920-- | @pinnedWriteNAligned align n@ folds a maximum of @n@ elements from the
22421921-- input stream to a 'MutArray' aligned to the given size.
22431922--
2244−-- >>> pinnedWriteNAligned align = MutArray.createOfWith (MutArray.pinnedNewAligned align)
2245−-- >>> pinnedWriteNAligned align n = MutArray.appendN n (MutArray.pinnedNewAligned align n)
1923+-- >>> pinnedWriteNAligned align = MutArray.writeNWith (MutArray.pinnedNewAligned align)
1924+-- >>> pinnedWriteNAligned align n = MutArray.writeAppendN n (MutArray.pinnedNewAligned align n)
22461925--
22471926-- /Pre-release/
22481927--
22491928{-# INLINE_NORMAL pinnedWriteNAligned #-}
22501929pinnedWriteNAligned :: forall m a. (MonadIO m, Unbox a)
22511930 => Int -> Int -> Fold m a (MutArray a)
2252−pinnedWriteNAligned align = createOfWith (pinnedNewAligned align)
1931+pinnedWriteNAligned align = writeNWith (pinnedNewAligned align)
22531932
22541933-- XXX Buffer to a list instead?
22551934
22561935-- | Buffer a stream into a stream of arrays.
22571936--
2258−-- >>> buildChunks n = Fold.many (MutArray.createOf n) Fold.toStreamK
1937+-- >>> buildChunks n = Fold.many (MutArray.writeN n) Fold.toStreamK
22591938--
22601939-- Breaking an array into an array stream can be useful to consume a large
22611940-- array sequentially such that memory of the array is released incrementatlly.
@@ -2267,10 +1946,9 @@ pinnedWriteNAligned align = createOfWith (pinnedNewAligned align)
22671946{-# INLINE_NORMAL buildChunks #-}
22681947buildChunks :: (MonadIO m, Unbox a) =>
22691948 Int -> Fold m a (StreamK n (MutArray a))
2270−buildChunks n = FL.many (createOf n) FL.toStreamK
1949+buildChunks n = FL.many (writeN n) FL.toStreamK
22711950
22721951{-# DEPRECATED writeChunks "Please use buildChunks instead." #-}
2273−{-# INLINE writeChunks #-}
22741952writeChunks :: (MonadIO m, Unbox a) =>
22751953 Int -> Fold m a (StreamK n (MutArray a))
22761954writeChunks = buildChunks
@@ -2278,29 +1956,29 @@ writeChunks = buildChunks
22781956{-# INLINE_NORMAL writeWithAs #-}
22791957writeWithAs :: forall m a. (MonadIO m, Unbox a)
22801958 => PinnedState -> Int -> Fold m a (MutArray a)
2281−-- writeWithAs ps n = FL.rmapM rightSize $ appendWith (* 2) (newAs ps n)
1959+-- writeWithAs ps n = FL.rmapM rightSize $ writeAppendWith (* 2) (newAs ps n)
22821960writeWithAs ps elemCount =
22831961 FL.rmapM extract $ FL.foldlM' step initial
22841962
22851963 where
22861964
22871965 initial = do
2288− when (elemCount < 0) $ error "createWith: elemCount is negative"
2289− newAs ps elemCount
1966+ when (elemCount < 0) $ error "writeWith: elemCount is negative"
1967+ liftIO $ newAs ps elemCount
22901968
22911969 step arr@(MutArray _ start end bound) x
22921970 | INDEX_NEXT(end,a) > bound = do
22931971 let oldSize = end - start
22941972 newSize = max (oldSize * 2) 1
2295− arr1 <- liftIO $ reallocExplicitAs ps (SIZE_OF(a)) newSize arr
1973+ arr1 <- liftIO $ reallocExplicit (SIZE_OF(a)) newSize arr
22961974 snocUnsafe arr1 x
22971975 step arr x = snocUnsafe arr x
22981976
22991977 extract = liftIO . rightSize
23001978
2301−-- XXX Compare createWith with fromStreamD which uses an array of streams
1979+-- XXX Compare writeWith with fromStreamD which uses an array of streams
23021980-- implementation. We can write this using buildChunks above if that is faster.
2303−-- If createWith is faster then we should use that to implement
1981+-- If writeWith is faster then we should use that to implement
23041982-- fromStreamD.
23051983--
23061984-- XXX The realloc based implementation needs to make one extra copy if we use
@@ -2315,56 +1993,39 @@ writeWithAs ps elemCount =
23151993-- XXX check if GHC's memory allocator is efficient enough. We can try the C
23161994-- malloc to compare against.
23171995
2318−-- | @createWith minCount@ folds the whole input to a single array. The array
1996+-- | @writeWith minCount@ folds the whole input to a single array. The array
23191997-- starts at a size big enough to hold minCount elements, the size is doubled
23201998-- every time the array needs to be grown.
23211999--
23222000-- /Caution! Do not use this on infinite streams./
23232001--
2324−-- >>> f n = MutArray.appendWith (* 2) (MutArray.emptyOf n)
2325−-- >>> createWith n = Fold.rmapM MutArray.rightSize (f n)
2326−-- >>> createWith n = Fold.rmapM MutArray.fromChunksK (MutArray.buildChunks n)
2002+-- >>> f n = MutArray.writeAppendWith (* 2) (MutArray.new n)
2003+-- >>> writeWith n = Fold.rmapM MutArray.rightSize (f n)
2004+-- >>> writeWith n = Fold.rmapM MutArray.fromChunksK (MutArray.buildChunks n)
23272005--
23282006-- /Pre-release/
2329−{-# INLINE_NORMAL createWith #-}
2330−createWith :: forall m a. (MonadIO m, Unbox a)
2331− => Int -> Fold m a (MutArray a)
2332−-- createWith n = FL.rmapM rightSize $ appendWith (* 2) (emptyOf n)
2333−createWith = writeWithAs Unpinned
2334−
2335−{-# DEPRECATED writeWith "Please use createWith instead." #-}
2336−{-# INLINE writeWith #-}
2007+{-# INLINE_NORMAL writeWith #-}
23372008writeWith :: forall m a. (MonadIO m, Unbox a)
23382009 => Int -> Fold m a (MutArray a)
2339−writeWith = createWith
2010+-- writeWith n = FL.rmapM rightSize $ writeAppendWith (* 2) (new n)
2011+writeWith = writeWithAs Unpinned
23402012
23412013-- | Fold the whole input to a single array.
23422014--
2343−-- Same as 'createWith' using an initial array size of 'arrayChunkBytes' bytes
2015+-- Same as 'writeWith' using an initial array size of 'arrayChunkBytes' bytes
23442016-- rounded up to the element size.
23452017--
23462018-- /Caution! Do not use this on infinite streams./
23472019--
2348−{-# INLINE create #-}
2349−create :: forall m a. (MonadIO m, Unbox a) => Fold m a (MutArray a)
2350−create = createWith (allocBytesToElemCount (undefined :: a) arrayChunkBytes)
2351−
2352−-- XXX Deprecate in major
2353−-- {-# DEPRECATED write "Please use create instead." #-}
23542020{-# INLINE write #-}
23552021write :: forall m a. (MonadIO m, Unbox a) => Fold m a (MutArray a)
2356−write = create
2022+write = writeWith (allocBytesToElemCount (undefined :: a) arrayChunkBytes)
23572023
2358−-- | Like 'create' but creates a pinned array.
2359−{-# INLINE pinnedCreate #-}
2360−pinnedCreate :: forall m a. (MonadIO m, Unbox a) => Fold m a (MutArray a)
2361−pinnedCreate =
2362− writeWithAs Pinned (allocBytesToElemCount (undefined :: a) arrayChunkBytes)
2363−
2364−{-# DEPRECATED pinnedWrite "Please use pinnedCreate instead." #-}
2024+-- | Like 'write' but creates a pinned array.
23652025{-# INLINE pinnedWrite #-}
23662026pinnedWrite :: forall m a. (MonadIO m, Unbox a) => Fold m a (MutArray a)
2367−pinnedWrite = pinnedCreate
2027+pinnedWrite =
2028+ writeWithAs Pinned (allocBytesToElemCount (undefined :: a) arrayChunkBytes)
23682029
23692030-------------------------------------------------------------------------------
23702031-- construct from streams, known size
@@ -2374,7 +2035,7 @@ pinnedWrite = pinnedCreate
23742035fromStreamDNAs :: forall m a. (MonadIO m, Unbox a)
23752036 => PinnedState -> Int -> D.Stream m a -> m (MutArray a)
23762037fromStreamDNAs ps limit str = do
2377− (arr :: MutArray a) <- newAs ps limit
2038+ (arr :: MutArray a) <- liftIO $ newAs ps limit
23782039 end <- D.foldlM' (fwrite (arrContents arr)) (return $ arrEnd arr) $ D.take limit str
23792040 return $ arr {arrEnd = end}
23802041
@@ -2384,18 +2045,17 @@ fromStreamDNAs ps limit str = do
23842045 liftIO $ pokeAt ptr arrContents x
23852046 return $ INDEX_NEXT(ptr,a)
23862047
2387−-- | Use the 'createOf' fold instead.
2048+-- | Use the 'writeN' fold instead.
23882049--
2389−-- >>> fromStreamN n = Stream.fold (MutArray.createOf n)
2050+-- >>> fromStreamN n = Stream.fold (MutArray.writeN n)
23902051--
23912052{-# INLINE_NORMAL fromStreamN #-}
23922053fromStreamN :: forall m a. (MonadIO m, Unbox a)
23932054 => Int -> D.Stream m a -> m (MutArray a)
2394−-- fromStreamDN n = D.fold (createOf n)
2055+-- fromStreamDN n = D.fold (writeN n)
23952056fromStreamN = fromStreamDNAs Unpinned
23962057
23972058{-# DEPRECATED fromStreamDN "Please use fromStreamN instead." #-}
2398−{-# INLINE fromStreamDN #-}
23992059fromStreamDN :: forall m a. (MonadIO m, Unbox a)
24002060 => Int -> D.Stream m a -> m (MutArray a)
24012061fromStreamDN = fromStreamN
@@ -2418,20 +2078,20 @@ pinnedFromListN n xs = fromStreamDNAs Pinned n $ D.fromList xs
24182078-- /Pre-release/
24192079{-# INLINE fromListRevN #-}
24202080fromListRevN :: (MonadIO m, Unbox a) => Int -> [a] -> m (MutArray a)
2421−fromListRevN n xs = D.fold (revCreateOf n) $ D.fromList xs
2081+fromListRevN n xs = D.fold (writeRevN n) $ D.fromList xs
24222082
24232083-- | Convert a pure stream in Identity monad to a mutable array.
24242084{-# INLINABLE fromPureStreamN #-}
24252085fromPureStreamN :: (MonadIO m, Unbox a) =>
24262086 Int -> Stream Identity a -> m (MutArray a)
24272087fromPureStreamN n xs =
2428− D.fold (createOf n) $ D.morphInner (return . runIdentity) xs
2088+ liftIO $ D.fold (writeN n) $ D.morphInner (return . runIdentity) xs
24292089
24302090-- | Convert a pure stream in Identity monad to a mutable array.
24312091{-# INLINABLE fromPureStream #-}
24322092fromPureStream :: (MonadIO m, Unbox a) => Stream Identity a -> m (MutArray a)
24332093fromPureStream xs =
2434− D.fold create $ D.morphInner (return . runIdentity) xs
2094+ liftIO $ D.fold write $ D.morphInner (return . runIdentity) xs
24352095
24362096{-# INLINABLE fromPtrN #-}
24372097fromPtrN :: MonadIO m => Int -> Ptr Word8 -> m (MutArray Word8)
@@ -2440,7 +2100,7 @@ fromPtrN len addr = do
24402100 -- XXX We can implement a stream copy in a similar way by streaming Word64
24412101 -- first and then remaining Word8.
24422102 arr <- new len
2443− _ <- unsafeAsPtr arr
2103+ _ <- asUnpinnedPtrUnsafe arr
24442104 (\ptr -> liftIO $ c_memcpy ptr addr (fromIntegral len))
24452105 return (arr {arrEnd = len})
24462106
@@ -2456,7 +2116,7 @@ fromByteStr# addr = do
24562116 len <- liftIO $ c_strlen (Ptr addr)
24572117 let lenInt = fromIntegral len
24582118 arr <- new lenInt
2459− _ <- unsafeAsPtr arr (\ptr -> liftIO $ c_memcpy ptr (Ptr addr) len)
2119+ _ <- asUnpinnedPtrUnsafe arr (\ptr -> liftIO $ c_memcpy ptr (Ptr addr) len)
24602120 return (arr {arrEnd = lenInt})
24612121
24622122-------------------------------------------------------------------------------
@@ -2477,7 +2137,7 @@ fromChunksRealloced s = do
24772137 arr <- D.foldlM' spliceExp (pure a) strm
24782138 -- Reallocation is exponential so there may be 50% empty space in
24792139 -- worst case. One more reallocation to reclaim the space.
2480− rightSize arr
2140+ liftIO $ rightSize arr
24812141 Nothing -> pure nil
24822142
24832143-------------------------------------------------------------------------------
@@ -2515,7 +2175,6 @@ fromChunksK :: (Unbox a, MonadIO m) =>
25152175fromChunksK = fromChunkskAs Unpinned
25162176
25172177{-# DEPRECATED fromArrayStreamK "Please use fromChunksK instead." #-}
2518−{-# INLINE fromArrayStreamK #-}
25192178fromArrayStreamK :: (Unbox a, MonadIO m) =>
25202179 StreamK m (MutArray a) -> m (MutArray a)
25212180fromArrayStreamK = fromChunksK
@@ -2527,7 +2186,7 @@ fromStreamDAs ps m =
25272186 arrayStreamKFromStreamDAs Unpinned m >>= fromChunkskAs ps
25282187
25292188-- | Create an 'Array' from a stream. This is useful when we want to create a
2530−-- single array from a stream of unknown size. 'createOf' is at least twice
2189+-- single array from a stream of unknown size. 'writeN' is at least twice
25312190-- as efficient when the size is already known.
25322191--
25332192-- Note that if the input stream is too large memory allocation for the array
@@ -2539,19 +2198,19 @@ fromStreamDAs ps m =
25392198fromStream :: (MonadIO m, Unbox a) => Stream m a -> m (MutArray a)
25402199fromStream = fromStreamDAs Unpinned
25412200
2542−-- fromStream (Stream m) = P.fold create m
2201+-- fromStream (Stream m) = P.fold write m
25432202-- CAUTION: a very large number (millions) of arrays can degrade performance
25442203-- due to GC overhead because we need to buffer the arrays before we flatten
25452204-- all the arrays.
25462205--
2547−-- XXX Compare if this is faster or "fold create".
2206+-- XXX Compare if this is faster or "fold write".
25482207--
25492208-- | We could take the approach of doubling the memory allocation on each
25502209-- overflow. This would result in more or less the same amount of copying as in
25512210-- the chunking approach. However, if we have to shrink in the end then it may
25522211-- result in an extra copy of the entire data.
25532212--
2554−-- >>> fromStreamD = StreamD.fold MutArray.create
2213+-- >>> fromStreamD = StreamD.fold MutArray.write
25552214--
25562215{-# INLINE fromStreamD #-}
25572216{-# DEPRECATED fromStreamD "Please use fromStream instead." #-}
@@ -2581,10 +2240,6 @@ fromListRev xs = fromListRevN (Prelude.length xs) xs
25812240-- Cloning
25822241-------------------------------------------------------------------------------
25832242
2584−-- Arrays are aligned on 64-bit boundaries. The fastest way to copy an array is
2585−-- to unsafeCast it to Word64, read it, write it to Word64 array and unsafeCast
2586−-- it again. We can use SIMD read/write as well.
2587−
25882243{-# INLINE cloneAs #-}
25892244cloneAs ::
25902245 ( MonadIO m
@@ -2594,7 +2249,7 @@ cloneAs ::
25942249 )
25952250 => PinnedState -> MutArray a -> m (MutArray a)
25962251cloneAs ps src =
2597− do
2252+ liftIO $ do
25982253 let startSrc = arrStart src
25992254 srcLen = arrEnd src - startSrc
26002255 newArrContents <-
@@ -2633,16 +2288,17 @@ spliceCopy :: forall m a. MonadIO m =>
26332288 Unbox a =>
26342289#endif
26352290 MutArray a -> MutArray a -> m (MutArray a)
2636−spliceCopy arr1 arr2 = do
2291+spliceCopy arr1 arr2 = liftIO $ do
26372292 let start1 = arrStart arr1
26382293 start2 = arrStart arr2
26392294 len1 = arrEnd arr1 - start1
26402295 len2 = arrEnd arr2 - start2
2641− let len = len1 + len2
2296+ let newLen = len1 + len2
26422297 newArrContents <-
26432298 if Unboxed.isPinned (arrContents arr1)
2644− then liftIO $ Unboxed.pinnedNew len
2645− else liftIO $ Unboxed.new len
2299+ then Unboxed.pinnedNew newLen
2300+ else Unboxed.new newLen
2301+ let len = len1 + len2
26462302 putSliceUnsafe (arrContents arr1) start1 newArrContents 0 len1
26472303 putSliceUnsafe (arrContents arr2) start2 newArrContents len1 len2
26482304 return $ MutArray newArrContents 0 len len
@@ -2654,7 +2310,7 @@ spliceCopy arr1 arr2 = do
26542310spliceUnsafe :: MonadIO m =>
26552311 MutArray a -> MutArray a -> m (MutArray a)
26562312spliceUnsafe dst src =
2657− do
2313+ liftIO $ do
26582314 let startSrc = arrStart src
26592315 srcLen = arrEnd src - startSrc
26602316 endDst = arrEnd dst
@@ -2676,7 +2332,7 @@ spliceWith :: forall m a. (MonadIO m, Unbox a) =>
26762332 (Int -> Int -> Int) -> MutArray a -> MutArray a -> m (MutArray a)
26772333spliceWith sizer dst@(MutArray _ start end bound) src = do
26782334{-
2679− let f = appendWith (`sizer` byteLength src) (return dst)
2335+ let f = writeAppendWith (`sizer` byteLength src) (return dst)
26802336 in D.fold f (toStreamD src)
26812337-}
26822338 assert (end <= bound) (return ())
@@ -2692,7 +2348,7 @@ spliceWith sizer dst@(MutArray _ start end bound) src = do
26922348 $ "splice: newSize is less than the total size "
26932349 ++ "of arrays being appended. Please check the "
26942350 ++ "sizer function passed."
2695− realloc newSizeInBytes dst
2351+ liftIO $ realloc newSizeInBytes dst
26962352 else return dst
26972353 spliceUnsafe dst1 src
26982354
@@ -2744,7 +2400,7 @@ splitOn predicate arr =
27442400{-# INLINE breakOn #-}
27452401breakOn :: MonadIO m
27462402 => Word8 -> MutArray Word8 -> m (MutArray Word8, Maybe (MutArray Word8))
2747−breakOn sep arr@MutArray{..} = unsafeAsPtr arr $ \p -> liftIO $ do
2403+breakOn sep arr@MutArray{..} = asUnpinnedPtrUnsafe arr $ \p -> liftIO $ do
27482404 -- XXX We do not need memchr here, we can use a Haskell equivalent.
27492405 -- Need efficient stream based primitives that work on Word64.
27502406 loc <- c_memchr p sep (fromIntegral $ byteLength arr)
@@ -2767,41 +2423,32 @@ breakOn sep arr@MutArray{..} = unsafeAsPtr arr $ \p -> liftIO $ do
27672423 }
27682424 )
27692425
2770−-- | Like 'splitAt' but does not check whether the index is valid.
2771−--
2772−{-# INLINE unsafeSplitAt #-}
2773−unsafeSplitAt :: forall a. Unbox a =>
2774− Int -> MutArray a -> (MutArray a, MutArray a)
2775−unsafeSplitAt i MutArray{..} =
2776− let off = i * SIZE_OF(a)
2777− p = arrStart + off
2778− in ( MutArray
2779− { arrContents = arrContents
2780− , arrStart = arrStart
2781− , arrEnd = p
2782− , arrBound = p
2783− }
2784− , MutArray
2785− { arrContents = arrContents
2786− , arrStart = p
2787− , arrEnd = arrEnd
2788− , arrBound = arrBound
2789− }
2790− )
2791−
27922426-- | Create two slices of an array without copying the original array. The
27932427-- specified index @i@ is the first index of the second slice.
27942428--
2795−{-# INLINE splitAt #-}
27962429splitAt :: forall a. Unbox a => Int -> MutArray a -> (MutArray a, MutArray a)
2797−splitAt i arr =
2430+splitAt i arr@MutArray{..} =
27982431 let maxIndex = length arr - 1
27992432 in if i < 0
28002433 then error "sliceAt: negative array index"
28012434 else if i > maxIndex
28022435 then error $ "sliceAt: specified array index " ++ show i
28032436 ++ " is beyond the maximum index " ++ show maxIndex
2804− else unsafeSplitAt i arr
2437+ else let off = i * SIZE_OF(a)
2438+ p = arrStart + off
2439+ in ( MutArray
2440+ { arrContents = arrContents
2441+ , arrStart = arrStart
2442+ , arrEnd = p
2443+ , arrBound = p
2444+ }
2445+ , MutArray
2446+ { arrContents = arrContents
2447+ , arrStart = p
2448+ , arrEnd = arrEnd
2449+ , arrBound = arrBound
2450+ }
2451+ )
28052452
28062453-------------------------------------------------------------------------------
28072454-- Casting
@@ -2851,13 +2498,9 @@ cast arr =
28512498-- guarantees that unsafe calls will be performed in the calling thread. Making
28522499-- it safe to pass heap-allocated objects to unsafe functions.
28532500
2854−-- XXX Should we just name it asPtr, the unsafety is implicit for any pointer
2501+-- Should we just name it asPtr, the unsafety is implicit for any pointer
28552502-- operations. And we are safe from Haskell perspective because we will be
28562503-- pinning the memory.
2857−--
2858−-- XXX we cannot pass the length of the ptr here as in some cases it may not be
2859−-- available e.g. a null terminated C string. However, we can create another
2860−-- flavor of the API e.g. asPtrN.
28612504
28622505-- | Use a @MutArray a@ as @Ptr a@. This is useful when we want to pass an
28632506-- array as a pointer to some operating system call or to a "safe" FFI call.
@@ -2875,21 +2518,16 @@ cast arr =
28752518--
28762519-- /Pre-release/
28772520--
2878−{-# INLINE unsafePinnedAsPtr #-}
2879−unsafePinnedAsPtr :: MonadIO m => MutArray a -> (Ptr a -> m b) -> m b
2880−unsafePinnedAsPtr arr f =
2881− Unboxed.unsafePinnedAsPtr
2882− (arrContents arr) (\ptr -> f (ptr `plusPtr` arrStart arr))
2883−
2884−{-# DEPRECATED asPtrUnsafe "Please use unsafePinnedAsPtr instead." #-}
28852521{-# INLINE asPtrUnsafe #-}
28862522asPtrUnsafe :: MonadIO m => MutArray a -> (Ptr a -> m b) -> m b
2887−asPtrUnsafe = unsafePinnedAsPtr
2523+asPtrUnsafe arr f =
2524+ Unboxed.asPtrUnsafe
2525+ (arrContents arr) (\ptr -> f (ptr `plusPtr` arrStart arr))
28882526
2889−{-# INLINE unsafeAsPtr #-}
2890−unsafeAsPtr :: MonadIO m => MutArray a -> (Ptr a -> m b) -> m b
2891−unsafeAsPtr arr f =
2892− Unboxed.unsafeAsPtr
2527+{-# INLINE asUnpinnedPtrUnsafe #-}
2528+asUnpinnedPtrUnsafe :: MonadIO m => MutArray a -> (Ptr a -> m b) -> m b
2529+asUnpinnedPtrUnsafe arr f =
2530+ Unboxed.asUnpinnedPtrUnsafe
28932531 (arrContents arr) (\ptr -> f (ptr `plusPtr` arrStart arr))
28942532
28952533-------------------------------------------------------------------------------
@@ -2907,26 +2545,28 @@ unsafeAsPtr arr f =
29072545-- /Pre-release/
29082546{-# INLINE byteCmp #-}
29092547byteCmp :: MonadIO m => MutArray a -> MutArray a -> m Ordering
2910−byteCmp arr1 arr2 = do
2911− let marr1 = getMutableByteArray# (arrContents arr1)
2912− marr2 = getMutableByteArray# (arrContents arr2)
2913− !(I# st1#) = arrStart arr1
2914− !(I# st2#) = arrStart arr2
2915− !(I# len#) = byteLength arr1
2916− case compare (byteLength arr1) (byteLength arr2) of
2917− EQ -> do
2918− r <- liftIO $ IO $ \s# ->
2919− let res =
2920− I#
2921− (compareByteArrays#
2922− (unsafeCoerce# marr1)
2923− st1#
2924− (unsafeCoerce# marr2)
2925− st2#
2926− len#)
2927− in (# s#, res #)
2928− return $ compare r 0
2929− x -> return x
2548+byteCmp arr1 arr2 =
2549+ liftIO
2550+ $ do
2551+ let marr1 = getMutableByteArray# (arrContents arr1)
2552+ marr2 = getMutableByteArray# (arrContents arr2)
2553+ !(I# st1#) = arrStart arr1
2554+ !(I# st2#) = arrStart arr2
2555+ !(I# len#) = byteLength arr1
2556+ case compare (byteLength arr1) (byteLength arr2) of
2557+ EQ -> do
2558+ r <- liftIO $ IO $ \s# ->
2559+ let res =
2560+ I#
2561+ (compareByteArrays#
2562+ (unsafeCoerce# marr1)
2563+ st1#
2564+ (unsafeCoerce# marr2)
2565+ st2#
2566+ len#)
2567+ in (# s#, res #)
2568+ return $ compare r 0
2569+ x -> return x
29302570
29312571{-# INLINE cmp #-}
29322572{-# DEPRECATED cmp "Please use byteCmp instead." #-}
@@ -2943,309 +2583,7 @@ byteEq :: MonadIO m => MutArray a -> MutArray a -> m Bool
29432583byteEq arr1 arr2 = fmap (EQ ==) $ byteCmp arr1 arr2
29442584
29452585-------------------------------------------------------------------------------
2946−-- Compact
2947−-------------------------------------------------------------------------------
2948−
2949−-- Note: LE versions avoid an extra copy compared to GE. LE parser trades
2950−-- backtracking one array in lieu of avoiding a copy. However, LE and GE both
2951−-- can leave some memory unused. They can split the last array to fit it
2952−-- exactly in the space.
2953−
2954−{-# INLINE_NORMAL pCompactLeAs #-}
2955−pCompactLeAs ::
2956− forall m a. (MonadIO m, Unbox a)
2957− => PinnedState -> Int -> Parser (MutArray a) m (MutArray a)
2958−pCompactLeAs ps maxElems = Parser step initial extract
2959−
2960− where
2961−
2962− maxBytes = maxElems * SIZE_OF(a)
2963−
2964− functionName = "Streamly.Internal.Data.MutArray.pCompactLE"
2965−
2966− initial =
2967− return
2968− $ if maxElems <= 0
2969− then error
2970− $ functionName
2971− ++ ": the size of arrays ["
2972− ++ show maxElems ++ "] must be a natural number"
2973− else Parser.IPartial Nothing
2974−
2975− step Nothing arr =
2976− return
2977− $ let len = byteLength arr
2978− in if len >= maxBytes
2979− then Parser.Done 0 arr
2980− else Parser.Partial 0 (Just arr)
2981− -- XXX Split the last array to use the space more compactly.
2982− step (Just buf) arr =
2983− let len = byteLength buf + byteLength arr
2984− in if len > maxBytes
2985− then return $ Parser.Done 1 buf
2986− else do
2987− buf1 <-
2988− if byteCapacity buf < maxBytes
2989− then liftIO $ reallocExplicitAs
2990− ps (SIZE_OF(a)) maxBytes buf
2991− else return buf
2992− buf2 <- spliceUnsafe buf1 arr
2993− return $ Parser.Partial 0 (Just buf2)
2994−
2995− extract Nothing = return $ Parser.Done 0 nil
2996− extract (Just buf) = return $ Parser.Done 0 buf
2997−
2998−-- | Parser @pCompactLE maxElems@ coalesces adjacent arrays in the input stream
2999−-- only if the combined size would be less than or equal to @maxElems@
3000−-- elements. Note that it won't split an array if the original array is already
3001−-- larger than maxElems.
3002−--
3003−-- @maxElems@ must be greater than 0.
3004−--
3005−-- Generates unpinned arrays irrespective of the pinning status of input
3006−-- arrays.
3007−--
3008−-- /Internal/
3009−{-# INLINE pCompactLE #-}
3010−pCompactLE ::
3011− forall m a. (MonadIO m, Unbox a)
3012− => Int -> Parser (MutArray a) m (MutArray a)
3013−pCompactLE = pCompactLeAs Unpinned
3014−
3015−-- | Pinned version of 'pCompactLE'.
3016−{-# INLINE pPinnedCompactLE #-}
3017−pPinnedCompactLE ::
3018− forall m a. (MonadIO m, Unbox a)
3019− => Int -> Parser (MutArray a) m (MutArray a)
3020−pPinnedCompactLE = pCompactLeAs Pinned
3021−
3022−data SpliceState s arr
3023− = SpliceInitial s
3024− | SpliceBuffering s arr
3025− | SpliceYielding arr (SpliceState s arr)
3026− | SpliceFinish
3027−
3028−-- This mutates the first array (if it has space) to append values from the
3029−-- second one. This would work for immutable arrays as well because an
3030−-- immutable array never has additional space so a new array is allocated
3031−-- instead of mutating it.
3032−
3033−{-# INLINE_NORMAL compactLeAs #-}
3034−compactLeAs :: forall m a. (MonadIO m, Unbox a)
3035− => PinnedState -> Int -> D.Stream m (MutArray a) -> D.Stream m (MutArray a)
3036−compactLeAs ps maxElems (D.Stream step state) =
3037− D.Stream step' (SpliceInitial state)
3038−
3039− where
3040−
3041− maxBytes = maxElems * SIZE_OF(a)
3042−
3043− functionName = "Streamly.Internal.Data.MutArray.rCompactLE"
3044−
3045− {-# INLINE_LATE step' #-}
3046− step' gst (SpliceInitial st) = do
3047− when (maxElems <= 0) $
3048− -- XXX we can pass the module string from the higher level API
3049− error $ functionName ++ ": the size of arrays [" ++ show maxElems
3050− ++ "] must be a natural number"
3051− r <- step gst st
3052− case r of
3053− D.Yield arr s -> return $
3054− let len = byteLength arr
3055− in if len >= maxBytes
3056− then D.Skip (SpliceYielding arr (SpliceInitial s))
3057− else D.Skip (SpliceBuffering s arr)
3058− D.Skip s -> return $ D.Skip (SpliceInitial s)
3059− D.Stop -> return D.Stop
3060−
3061− -- XXX Split the last array to use the space more compactly.
3062− step' gst (SpliceBuffering st buf) = do
3063− r <- step gst st
3064− case r of
3065− D.Yield arr s -> do
3066− let len = byteLength buf + byteLength arr
3067− if len > maxBytes
3068− then return $
3069− D.Skip (SpliceYielding buf (SpliceBuffering s arr))
3070− else do
3071− buf1 <- if byteCapacity buf < maxBytes
3072− then liftIO $ reallocExplicitAs
3073− ps (SIZE_OF(a)) maxBytes buf
3074− else return buf
3075− buf2 <- spliceUnsafe buf1 arr
3076− return $ D.Skip (SpliceBuffering s buf2)
3077− D.Skip s -> return $ D.Skip (SpliceBuffering s buf)
3078− D.Stop -> return $ D.Skip (SpliceYielding buf SpliceFinish)
3079−
3080− step' _ SpliceFinish = return D.Stop
3081−
3082− step' _ (SpliceYielding arr next) = return $ D.Yield arr next
3083−
3084−
3085−{-# INLINE_NORMAL fCompactGeAs #-}
3086−fCompactGeAs ::
3087− forall m a. (MonadIO m, Unbox a)
3088− => PinnedState -> Int -> FL.Fold m (MutArray a) (MutArray a)
3089−fCompactGeAs ps minElems = Fold step initial extract extract
3090−
3091− where
3092−
3093− minBytes = minElems * SIZE_OF(a)
3094−
3095− functionName = "Streamly.Internal.Data.MutArray.fCompactGE"
3096−
3097− initial =
3098− return
3099− $ if minElems < 0
3100− then error
3101− $ functionName
3102− ++ ": the size of arrays ["
3103− ++ show minElems ++ "] must be a natural number"
3104− else FL.Partial Nothing
3105−
3106− step Nothing arr =
3107− return
3108− $ let len = byteLength arr
3109− in if len >= minBytes
3110− then FL.Done arr
3111− else FL.Partial (Just arr)
3112− -- XXX Buffer arrays as a list to avoid copy and reallocations
3113− step (Just buf) arr = do
3114− let len = byteLength buf + byteLength arr
3115− buf1 <-
3116− if byteCapacity buf < len
3117− then liftIO $ reallocExplicitAs
3118− ps (SIZE_OF(a)) (max minBytes len) buf
3119− else return buf
3120− buf2 <- spliceUnsafe buf1 arr
3121− if len >= minBytes
3122− then return $ FL.Done buf2
3123− else return $ FL.Partial (Just buf2)
3124−
3125− extract Nothing = return nil
3126− extract (Just buf) = return buf
3127−
3128−-- | Fold @fCompactGE minElems@ coalesces adjacent arrays in the input stream
3129−-- until the size becomes greater than or equal to @minElems@.
3130−--
3131−-- Generates unpinned arrays irrespective of the pinning status of input
3132−-- arrays.
3133−{-# INLINE fCompactGE #-}
3134−fCompactGE ::
3135− forall m a. (MonadIO m, Unbox a)
3136− => Int -> FL.Fold m (MutArray a) (MutArray a)
3137−fCompactGE = fCompactGeAs Unpinned
3138−
3139−-- | Pinned version of 'fCompactGE'.
3140−{-# INLINE fPinnedCompactGE #-}
3141−fPinnedCompactGE ::
3142− forall m a. (MonadIO m, Unbox a)
3143− => Int -> FL.Fold m (MutArray a) (MutArray a)
3144−fPinnedCompactGE = fCompactGeAs Pinned
3145−
3146−{-# INLINE_NORMAL lCompactGeAs #-}
3147−lCompactGeAs :: forall m a. (MonadIO m, Unbox a)
3148− => PinnedState -> Int -> Fold m (MutArray a) () -> Fold m (MutArray a) ()
3149−-- The fold version turns out to be a little bit slower.
3150−-- lCompactGeAs ps n = FL.many (fCompactGeAs ps n)
3151−lCompactGeAs ps minElems (Fold step1 initial1 _ final1) =
3152− Fold step initial extract final
3153−
3154− where
3155−
3156− minBytes = minElems * SIZE_OF(a)
3157−
3158− functionName = "Streamly.Internal.Data.MutArray.lCompactGE"
3159−
3160− initial = do
3161− when (minElems <= 0) $
3162− -- XXX we can pass the module string from the higher level API
3163− error $ functionName ++ ": the size of arrays ["
3164− ++ show minElems ++ "] must be a natural number"
3165−
3166− r <- initial1
3167− return $ first (Tuple' Nothing) r
3168−
3169− {-# INLINE runInner #-}
3170− runInner len acc buf =
3171− if len >= minBytes
3172− then do
3173− r <- step1 acc buf
3174− case r of
3175− FL.Done _ -> return $ FL.Done ()
3176− FL.Partial s -> do
3177− _ <- final1 s
3178− res <- initial1
3179− return $ first (Tuple' Nothing) res
3180− else return $ FL.Partial $ Tuple' (Just buf) acc
3181−
3182− step (Tuple' Nothing r1) arr =
3183− runInner (byteLength arr) r1 arr
3184−
3185− -- XXX Buffer arrays as a list to avoid copy and reallocations
3186− step (Tuple' (Just buf) r1) arr = do
3187− let len = byteLength buf + byteLength arr
3188− buf1 <- if byteCapacity buf < len
3189− then liftIO $ reallocExplicitAs
3190− ps (SIZE_OF(a)) (max minBytes len) buf
3191− else return buf
3192− buf2 <- spliceUnsafe buf1 arr
3193− runInner len r1 buf2
3194−
3195− -- XXX Several folds do extract >=> final, therefore, we need to make final
3196− -- return "m b" rather than using extract post it if we want extract to be
3197− -- partial.
3198− --
3199− -- extract forces the pending buffer to be sent to the fold which is not
3200− -- what we want.
3201− extract _ = error "lCompactGE: not designed for scanning"
3202−
3203− final (Tuple' Nothing r1) = final1 r1
3204− final (Tuple' (Just buf) r1) = do
3205− r <- step1 r1 buf
3206− case r of
3207− FL.Partial rr -> final1 rr
3208− FL.Done _ -> return ()
3209−
3210−-- | Like 'compactGE' but for transforming folds instead of stream.
3211−--
3212−-- >>> lCompactGE n = Fold.many (MutArray.fCompactGE n)
3213−--
3214−-- Generates unpinned arrays irrespective of the pinning status of input
3215−-- arrays.
3216−{-# INLINE lCompactGE #-}
3217−lCompactGE :: forall m a. (MonadIO m, Unbox a)
3218− => Int -> Fold m (MutArray a) () -> Fold m (MutArray a) ()
3219−lCompactGE = lCompactGeAs Unpinned
3220−
3221−-- | Pinned version of 'lCompactGE'.
3222−{-# INLINE lPinnedCompactGE #-}
3223−lPinnedCompactGE :: forall m a. (MonadIO m, Unbox a)
3224− => Int -> Fold m (MutArray a) () -> Fold m (MutArray a) ()
3225−lPinnedCompactGE = lCompactGeAs Pinned
3226−
3227−-- | @compactGE n stream@ coalesces adjacent arrays in the @stream@ until
3228−-- the size becomes greater than or equal to @n@.
3229−--
3230−-- >>> compactGE n = Stream.foldMany (MutArray.fCompactGE n)
3231−--
3232−{-# INLINE compactGE #-}
3233−compactGE ::
3234− (MonadIO m, Unbox a)
3235− => Int -> Stream m (MutArray a) -> Stream m (MutArray a)
3236−compactGE n = D.foldMany (fCompactGE n)
3237−
3238−-- | 'compactEQ n' coalesces adajacent arrays in the input stream to
3239−-- arrays of exact size @n@.
3240−--
3241−-- /Unimplemented/
3242−{-# INLINE compactEQ #-}
3243−compactEQ :: -- (MonadIO m, Unbox a) =>
3244− Int -> Stream m (MutArray a) -> Stream m (MutArray a)
3245−compactEQ _n = undefined -- D.parseManyD (pCompactEQ n)
3246−
3247−-------------------------------------------------------------------------------
3248−-- In-place mutation algorithms
2586+-- NFData
32492587-------------------------------------------------------------------------------
32502588
32512589-- | Strip elements which match with predicate from both ends.